Add the TPMI efficiency latency control fields to the sysfs interface.
The sysfs files are mapped to the TPMI uncore driver via the registered
uncore_read and uncore_write driver callbacks. These fields are not
populated on older non TPMI hardware.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240828153657.1296410-4-tero.kristo@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add efficiency latency control support to the TPMI uncore driver. This
defines two new threshold values for controlling uncore frequency, low
threshold and high threshold. When CPU utilization is below low threshold,
the user configurable floor latency control frequency can be used by the
system. When CPU utilization is above high threshold, the uncore frequency
is increased in 100MHz steps until power limit is reached.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240828153657.1296410-3-tero.kristo@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The scope of uncore control is per power domain with TPMI.
There are two types of processor topologies can be presented by CPUID
extended topology leaf irrespective of the hardware architecture:
1. A die is not enumerated in CPUID. In this case there is only one die
in a package is visible. In this case there can be multiple power domains
in a single die.
2. A power domain in a package is enumerated as a die in CPUID. So
there is one power domain per die.
To allow die level controls, the current implementation creates a root
domain and aggregates all information from power domains in it. This
is well suited for configuration 1 above.
But for configuration 2 above, the root domain will present the same
information as present by power domain. So, no use of aggregating. To
check the configuration, call topology_max_dies_per_package(). If it is
more than one, avoid creating root domain.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240820204558.1296319-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use the generic sysfs helpers for reading the current frequency also,
and remove the custom ones.
No functional change intended.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240617060708.892981-8-tero.kristo@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The macros to create sysfs entries are going to be used for other
attributes in addition to current min/max frequencies only, so rename
these to be more generic.
No functional change intended.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240617060708.892981-7-tero.kristo@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Get rid of uncore_read_freq driver API. Instead, add a new entry to the
enumerated read interface and use this.
No functional change intended.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240617060708.892981-6-tero.kristo@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use the enumerated index for selecting the uncore driver parameter to
read, instead of reading everything. This is done in preparation to
expand the API to access more parameters later.
No functional change intended.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240617060708.892981-5-tero.kristo@linux.intel.com
[ij: Removed underscores from variable names]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Get rid of the hardcoded / magic min_max argument from internal APIs.
Instead, use an enumerated index value for it.
No functional change intended.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240617060708.892981-4-tero.kristo@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Get rid of any magic bitmasks from the code. Define proper macros for
these, and use the bitfield operations to access them.
No functional change intended.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240617060708.892981-3-tero.kristo@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename the various bitmasks from the 'UNCORE_GENMASK_*' to
'UNCORE_*_MASK', and re-order them based on the register they reside in.
No functional change intended.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240617060708.892981-2-tero.kristo@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531203706.233365-8-tony.luck@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- New drivers/platform/arm64 directory for arm64 embedded-controller drivers
- New drivers for:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight support
- Miscellaneous cleanups / fixes / improvements
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: add platform_profile_cycle()
Add ACPI quickstart button (PNP0C32) driver:
- Add ACPI quickstart button (PNP0C32) driver
Add lenovo-yoga-tab2-pro-1380-fastcharger driver:
- Add lenovo-yoga-tab2-pro-1380-fastcharger driver
Add new Dell UART backlight driver:
- Add new Dell UART backlight driver
Add lenovo WMI camera button driver:
- Add lenovo WMI camera button driver
Add new MeeGoPad ANX7428 Type-C Cross Switch driver:
- Add new MeeGoPad ANX7428 Type-C Cross Switch driver
ISST:
- Support SST-BF and SST-TF per level
- Add missing MODULE_DESCRIPTION
- Add dev_fmt
- Use in_range() to check package ID validity
- Support partitioned systems
- Shorten the assignments for power_domain_info
- Use local variable for auxdev->dev
MAINTAINERS:
- drop Daniel Oliveira Nascimento
arm64:
- dts: qcom: acer-aspire1: Add embedded controller
asus-laptop:
- Use sysfs_emit() and sysfs_emit_at() to replace sprintf()
asus-wmi:
- cleanup main struct to avoid some holes
- Add support for MCU powersave
- ROG Ally increase wait time, allow MCU powersave
- adjust formatting of ppt-<name>() functions
- store a min default for ppt options
- support toggling POST sound
- add support variant of TUF RGB
- add support for Vivobook GPU MUX
- add support for 2024 ROG Mini-LED
- use sysfs_emit() instead of sprintf()
classmate-laptop:
- Add missing MODULE_DESCRIPTION()
devm-helpers:
- Fix a misspelled cancellation in the comments
dt-bindings:
- leds: Add LED_FUNCTION_FNLOCK
- platform: Add Acer Aspire 1 EC
hp-wmi:
- use sysfs_emit() instead of sprintf()
huawei-wmi:
- use sysfs_emit() instead of sprintf()
ideapad-laptop:
- switch platform profiles using thermal management key
- add FnLock LED class device
- add fn_lock_get/set functions
intel-vbtn:
- Log event code on unexpected button events
intel/pmc:
- Enable S0ix blocker show in Lunar Lake
- Add support to show S0ix blocker counter
- Update LNL signal status map
msi-laptop:
- Use sysfs_emit() to replace sprintf()
p2sb:
- Don't init until unassigned resources have been assigned
- Make p2sb_get_devfn() return void
platform:
- arm64: Add Acer Aspire 1 embedded controller driver
- Add ARM64 platform directory
platform/surface:
- aggregator: Log critical errors during SAM probing
- aggregator_registry: Add support for thermal sensors on the Surface Pro 9
- platform_profile: add fan profile switching
platform/x86/amd:
- pmc: Add new ACPI ID AMDI000B
- pmf: Add new ACPI ID AMDI0105
platform/x86/amd/hsmp:
- switch to use device_add_groups()
platform/x86/amd/pmc:
- Fix implicit declaration error on i386
- Add AMD MP2 STB functionality
platform/x86/fujitsu-laptop:
- Replace sprintf() with sysfs_emit()
platform/x86/intel-uncore-freq:
- Don't present root domain on error
platform/x86/intel/ifs:
- Disable irq during one load stage
- trace: display batch num in hex
- Classify error scenarios correctly
platform/x86/intel/pmc:
- Fix PCH names in comments
platform/x86/intel/sdsi:
- Add attribute to read the current meter state
- Add in-band BIOS lock support
- Combine read and write mailbox flows
- Set message size during writes
platform/x86/intel/tpmi:
- Add additional TPMI header fields
- Align comments in kernel-doc
- Check major version change for TPMI Information
- Handle error from tpmi_process_info()
quickstart:
- Fix race condition when reporting input event
- fix Kconfig selects
- Miscellaneous improvements
samsung-laptop:
- Use sysfs_emit() to replace the old interface sprintf()
think-lmi:
- Convert container_of() macros to static inline
thinkpad_acpi:
- Use false to set acpi_send_ev to false
- Support hotkey to disable trackpoint doubletap
- Support for system debug info hotkey
- Support for trackpoint doubletap
- Simplify known_ev handling
- Add mappings for adaptive kbd clipping-tool and cloud keys
- Switch to using sparse-keymap helpers
- Drop KEY_RESERVED special handling
- Use correct keycodes for volume and brightness keys
- Change hotkey_reserved_mask initialization
- Do not send ACPI netlink events for unknown hotkeys
- Move tpacpi_driver_event() call to tpacpi_input_send_key()
- Move hkey > scancode mapping to tpacpi_input_send_key()
- Drop tpacpi_input_send_key_masked() and hotkey_driver_event()
- Always call tpacpi_driver_event() for hotkeys
- Move hotkey_user_mask check to tpacpi_input_send_key()
- Move special original hotkeys handling out of switch-case
- Move adaptive kbd event handling to tpacpi_driver_event()
- Make tpacpi_driver_event() return if it handled the event
- Do hkey to scancode translation later
- Use tpacpi_input_send_key() in adaptive kbd code
- Drop ignore_acpi_ev
- Drop setting send_/ignore_acpi_ev defaults twice
- Provide hotkey_poll_stop_sync() dummy
- Take hotkey_mutex during hotkey_exit()
- change sprintf() to sysfs_emit()
- use platform_profile_cycle()
tools arch x86:
- Add dell-uart-backlight-emulator
tools/arch/x86/intel_sdsi:
- Add current meter support
- Simplify ascii printing
- Fix meter_certificate decoding
- Fix meter_show display
- Fix maximum meter bundle length
tools/power/x86/intel-speed-select:
- v1.19 release
- Display CPU as None for -1
- SST BF/TF support per level
- Increase number of CPUs displayed
- Present all TRL levels for turbo-freq
- Fix display for unsupported levels
- Support multiple dies
- Increase die count
toshiba_acpi:
- Add quirk for buttons on Z830
uv_sysfs:
- use sysfs_emit() instead of sprintf()
wmi:
- Add MSI WMI Platform driver
- Add driver development guide
- Mark simple WMI drivers as legacy-free
- Avoid returning AE_OK upon unknown error
- Support reading/writing 16 bit EC values
x86-android-tablets:
- Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
- Xiaomi pad2 RGB LED fwnode updates
- Pass struct device to init()
- Add Lenovo Yoga Tablet 2 Pro 1380F/L data
- Unregister devices in reverse order
- Add swnode for Xiaomi pad2 indicator LED
- Use GPIO_LOOKUP() macro
xiaomi-wmi:
- Drop unnecessary NULL checks
- Fix race condition when reporting key events
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmZF1kwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wSXwgAsaSH6Sawn5sHOj52lQY7gNI0uf3V
YfZFawRpreCrlwLPU2f7SX0mLW+hh+ekQ2C1NvaUUVqQwzONELh0DWSYJpzz/v1r
jD14EcY2dnTv+FVyvCj5jZsiYxo/ViTvthMduiO7rrJKN7aOej9iNn68P0lvcY8s
HDJ2lPFNGnY01snz3C1NyjyIWw8YsfwqXEqOmhrDyyoKLXpsDs8H/Jqq5yXfeLax
hSpjbGB85EGJPXna6Ux5TziPh/MYMtF1+8R4Fn0sGvfcZO6/H1fDne0uI9UwrKnN
d2g4VHXU2DIhTshUc14YT2AU27eQiZVN+J3VpuYIbC9cmlQ2F6bjN3uxoQ==
=UWbu
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
If none of the clusters are added because of some error, fail to load
driver without presenting root domain. In this case root domain will
present invalid data.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 01c10f88c9 ("platform/x86/intel-uncore-freq: tpmi: Provide cluster level control")
Cc: <stable@vger.kernel.org> # 6.5+
Link: https://lore.kernel.org/r/20240415215210.2824868-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
No new changes will be added for minor version 2. Change the minor
version number to 2 and stop displaying log message for unsupported
minor version 2.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240415220625.2828339-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When booting a kernel with CONFIG_CFI_CLANG, there is a CFI failure when
accessing any of the values under
/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00:
$ cat /sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/max_freq_khz
fish: Job 1, 'cat /sys/devices/system/cpu/int…' terminated by signal SIGSEGV (Address boundary error)
$ sudo dmesg &| grep 'CFI failure'
[ 170.953925] CFI failure at kobj_attr_show+0x19/0x30 (target: show_max_freq_khz+0x0/0xc0 [intel_uncore_frequency_common]; expected type: 0xd34078c5
The sysfs callback functions such as show_domain_id() are written as if
they are going to be called by dev_attr_show() but as the above message
shows, they are instead called by kobj_attr_show(). kCFI checks that the
destination of an indirect jump has the exact same type as the prototype
of the function pointer it is called through and fails when they do not.
These callbacks are called through kobj_attr_show() because
uncore_root_kobj was initialized with kobject_create_and_add(), which
means uncore_root_kobj has a ->sysfs_ops of kobj_sysfs_ops from
kobject_create(), which uses kobj_attr_show() as its ->show() value.
The only reason there has not been a more noticeable problem until this
point is that 'struct kobj_attribute' and 'struct device_attribute' have
the same layout, so getting the callback from container_of() works the
same with either value.
Change all the callbacks and their uses to be compatible with
kobj_attr_show() and kobj_attr_store(), which resolves the kCFI failure
and allows the sysfs files to work properly.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1974
Fixes: ae7b2ce578 ("platform/x86/intel/uncore-freq: Use sysfs API to create attributes")
Cc: stable@vger.kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240104-intel-uncore-freq-kcfi-fix-v1-1-bf1e8939af40@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When a feature is read blocked, don't continue to read uncore information
and register with uncore core.
When the feature is write blocked, continue to offer read interface but
block setting uncore limits.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231204221740.3645130-6-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Highlights:
- asus-wmi: Support for screenpad and solve brightness key
press duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- Remove void function return
amd/hsmp:
- add support for metrics tbl
- create plat specific struct
- Fix iomem handling
- improve the error log
amd/pmc:
- Add dump_custom_stb module parameter
- Add PMFW command id to support S2D force flush
- Handle overflow cases where the num_samples range is higher
- Use flex array when calling amd_pmc_stb_debugfs_open_v2()
asus-wireless:
- Replace open coded acpi_match_acpi_device()
asus-wmi:
- add support for ASUS screenpad
- Do not report brightness up/down keys when also reported by acpi_video
gpiolib: acpi:
- Add a ignore interrupt quirk for Peaq C1010
- Check if a GPIO is listed in ignore_interrupt earlier
hp-bioscfg:
- Annotate struct bios_args with __counted_by
inspur-platform-profile:
- Add platform profile support
int3472:
- Add new skl_int3472_fill_gpiod_lookup() helper
- Add new skl_int3472_gpiod_get_from_temp_lookup() helper
- Stop using gpiod_toggle_active_low()
- Switch to devm_get_gpiod()
intel: bytcrc_pwrsrc:
- Convert to platform remove callback returning void
intel/ifs:
- Add new CPU support
- Add new error code
- ARRAY BIST for Sierra Forest
- Gen2 scan image loading
- Gen2 Scan test support
- Metadata validation for start_chunk
- Refactor image loading code
- Store IFS generation number
- Validate image size
intel_speed_select_if:
- Remove hardcoded map size
- Use devm_ioremap_resource
intel/tpmi:
- Add debugfs support for read/write blocked
- Add defines to get version information
intel-uncore-freq:
- Ignore minor version change
ISST:
- Allow level 0 to be not present
- Ignore minor version change
- Use fuse enabled mask instead of allowed levels
mellanox:
- Fix misspelling error in routine name
- Rename some init()/exit() functions for consistent naming
mlxbf-bootctl:
- Convert to platform remove callback returning void
mlxbf-pmc:
- Add support for BlueField-3
mlxbf-tmfifo:
- Convert to platform remove callback returning void
mlx-Convert to platform remove callback returning void:
- mlx-Convert to platform remove callback returning void
mlxreg-hotplug:
- Convert to platform remove callback returning void
mlxreg-io:
- Convert to platform remove callback returning void
mlxreg-lc:
- Convert to platform remove callback returning void
msi-ec:
- Add more EC configs
- rename fn_super_swap
nvsw-sn2201:
- Convert to platform remove callback returning void
sel3350-Convert to platform remove callback returning void:
- sel3350-Convert to platform remove callback returning void
siemens: simatic-ipc-batt-apollolake:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt-elkhartlake:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt-f7188x:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt:
- Simplify simatic_ipc_batt_remove()
surface: acpi-notify:
- Convert to platform remove callback returning void
surface: aggregator:
- Annotate struct ssam_event with __counted_by
surface: aggregator-cdev:
- Convert to platform remove callback returning void
surface: aggregator-registry:
- Convert to platform remove callback returning void
surface: dtx:
- Convert to platform remove callback returning void
surface: gpe:
- Convert to platform remove callback returning void
surface: hotplug:
- Convert to platform remove callback returning void
surface: surface3-wmi:
- Convert to platform remove callback returning void
think-lmi:
- Add bulk save feature
- Replace kstrdup() + strreplace() with kstrdup_and_replace()
- Use strreplace() to replace a character by nul
thinkpad_acpi:
- Add battery quirk for Thinkpad X120e
- replace deprecated strncpy with memcpy
- sysfs interface to auxmac
tools/power/x86/intel-speed-select:
- Display error for core-power support
- Increase max CPUs in one request
- No TRL for non compute domains
- Sanitize integer arguments
- turbo-mode enable disable swapped
- Update help for TRL
- Use cgroup isolate for CPU 0
- v1.18 release
wmi:
- Decouple probe deferring from wmi_block_list
- Decouple WMI device removal from wmi_block_list
- Fix opening of char device
- Fix probe failure when failing to register WMI devices
- Fix refcounting of WMI devices in legacy functions
x86-android-tablets:
- Add a comment about x86_android_tablet_get_gpiod()
- Create a platform_device from module_init()
- Drop "linux,power-supply-name" from lenovo_yt3_bq25892_0_props[]
- Fix Lenovo Yoga Tablet 2 830F/L vs 1050F/L detection
- Remove invalid_aei_gpiochip from Peaq C1010
- Remove invalid_aei_gpiochip support
- Stop using gpiolib private APIs
- Use platform-device as gpio-keys parent
xo15-ebook:
- Replace open coded acpi_match_acpi_device()
Merges:
- Merge branch 'pdx86/platform-drivers-x86-int3472' into review-ilpo
- Merge branch 'pdx86/platform-drivers-x86-mellanox-init' into review-ilpo
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-ilpo
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-android-tablets' into review-hans
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZT+lBwAKCRBZrE9hU+XO
Mck0AQCFU7dYLCF4d1CXtHf1eZhSXLpYdhcO+C08JGGoM+MqSgD+Jyb9KJHk4pxE
FvKG51I9neyAne9lvNrLodHRzxCYgAo=
=duM8
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- asus-wmi: Support for screenpad and solve brightness key press
duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: inspur-platform-profile: Add platform profile support
platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e
platform/x86: wmi: Decouple WMI device removal from wmi_block_list
platform/x86: wmi: Fix opening of char device
platform/x86: wmi: Fix probe failure when failing to register WMI devices
platform/x86: wmi: Fix refcounting of WMI devices in legacy functions
platform/x86: wmi: Decouple probe deferring from wmi_block_list
platform/x86/amd/hsmp: Fix iomem handling
platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video
platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy
tools/power/x86/intel-speed-select: v1.18 release
tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0
tools/power/x86/intel-speed-select: Increase max CPUs in one request
tools/power/x86/intel-speed-select: Display error for core-power support
tools/power/x86/intel-speed-select: No TRL for non compute domains
tools/power/x86/intel-speed-select: turbo-mode enable disable swapped
tools/power/x86/intel-speed-select: Update help for TRL
tools/power/x86/intel-speed-select: Sanitize integer arguments
platform/x86: acer-wmi: Remove void function return
platform/x86/amd/pmc: Add dump_custom_stb module parameter
...
When the current uncore frequency can't be read, don't create attribute
"current_freq_khz" as any read will fail later. Some user space
applications like turbostat fail to continue with the failure. So, check
error during attribute creation.
Fixes: 414eef2728 ("platform/x86/intel/uncore-freq: Display uncore current frequency")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231004181915.1887913-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The hardware definition of every TPMI feature contains a major and minor
version. When there is a change in the MMIO offset or change in the
definition of a field, hardware will change major version. For addition
of new fields without modifying existing MMIO offsets or fields, only the
minor version is changed.
Driver is developed to support uncore frequency control (UFS) for a major
and minor version. If the hardware changes major version, since offsets
and definitions are changed, driver cannot continue to provide UFS
interface to users. Driver can still function with minor version change
as it will just miss the new functionality added by the hardware.
The current implementation logs information message and skips adding
uncore sysfs entry for a resource for any version mismatch. Check major
and minor version mismatch for every valid resource and fail on any major
version mismatch by logging an error message. A valid resource has a
version which is not 0xFF.
If there is mismatch with the minor version, continue with a log message.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20231003184916.1860084-4-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The new generation of CPUs have granular control at a cluster level.
Each package/die can have multiple power domains, which further can
have multiple fabric clusters. The TPMI interface allows control at
fabric cluster level.
Use the updated uncore sysfs feature to expose controls at cluster
level. At each cluster level there is a control for maximum and minimum
uncore frequency. Also present current uncore frequency at a cluster
level.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Link: https://lore.kernel.org/r/20230418171340.681662-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An SoC can contain multiple power domains with individual or collection
of mesh partitions. This partition is called fabric cluster.
Certain type of meshes will need to run at the same frequency, they will
be placed in the same fabric cluster. Benefit of fabric cluster is that
it offers a scalable mechanism to deal with partitioned fabrics in a SoC.
The current sysfs interface supports control at package and die level.
This interface is not enough to support more granular control at
fabric cluster level.
SoCs with the support of TPMI (Topology Aware Register and PM Capsule
Interface), can have multiple power domains. Each power domain can
contain one or more fabric clusters.
To support such granular controls, enhance uncore common to optionally
create new directories to provide controls at fabric cluster level. It
is also important to have flexibility to change granularity for future
version of SoCs. If the directory name contains scope like:
"package_*_die_*_power_domain_*_cluster_*", then this is not expandable.
The cpufreq policies also have different scopes. There the scope of the
policy (affected_cpus) specified by attributes inside each policy.
So, follow the same model for uncore frequency scaling sysfs as:
"sys/devices/system/cpu/cpufreq/policy*"
Allow client drivers to optionally support granular control for each
fabric cluster. Here, the directory name will be "uncore" suffixed with
an unique instance number. For example: uncore00, uncore01 etc.
Attributes in the directory identify package id, power domain and
fabric cluster id. This interface is expandable even if some new level
of granularity is introduced. A new sysfs attribute can identify new
level.
For compatibility with the existing sysfs and provide easy way to set
limits for each fabric cluster in the package/die, the existing control
at package/die levels are still provided. For majority of users, this is
an easy approach.
For example: On a single package/die system, with three power domains
and one fabric cluster per power domain:
$tree -L 2 /sys/devices/system/cpu/intel_uncore_frequency/
/sys/devices/system/cpu/intel_uncore_frequency/
├── package_00_die_00
│ ├── current_freq_khz
│ ├── initial_max_freq_khz
│ ├── initial_min_freq_khz
│ ├── max_freq_khz
│ └── min_freq_khz
├── uncore00
│ ├── current_freq_khz
│ ├── domain_id
│ ├── fabric_cluster_id
│ ├── initial_max_freq_khz
│ ├── initial_min_freq_khz
│ ├── max_freq_khz
│ ├── min_freq_khz
│ └── package_id
├── uncore01
│ ├── current_freq_khz
│ ├── domain_id
│ ├── fabric_cluster_id
│ ├── initial_max_freq_khz
│ ├── initial_min_freq_khz
│ ├── max_freq_khz
│ ├── min_freq_khz
│ └── package_id
└── uncore02
├── current_freq_khz
├── domain_id
├── fabric_cluster_id
├── initial_max_freq_khz
├── initial_min_freq_khz
├── max_freq_khz
├── min_freq_khz
└── package_id
The attribute for cluster id is "fabric_cluster_id" instead of just
"cluster_id" is to avoid confusion with usage of term clusters in
other part of the Linux kernel.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Link: https://lore.kernel.org/r/20230418171340.681662-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Implement support of uncore frequency control via TPMI (Topology Aware
Register and PM Capsule Interface). This driver provides the similar
functionality as the current uncore frequency driver using MSRs.
The hardware interface to read/write is basically substitution of MSR
0x620 and 0x621. There are specific MMIO offset and bits to get/set
minimum and maximum uncore ratio, similar to MSRs.
The scope of the uncore MSRs is package/die. But new generation of CPUs
have more granular control at a cluster level. Each package/die can have
multiple power domains, which further can have multiple clusters. The
TPMI interface allows control at cluster level.
The primary use case for uncore sysfs is to set maximum and minimum
uncore frequency to reduce power consumption or latency. The current
uncore sysfs control is per package/die. This is enough for the majority
of users as workload will move to different power domains as it moves
between different CPUs.
The current uncore sysfs provides controls at package/die level. When
user sets maximum/minimum limits, the driver sets the same limits to
each cluster.
Here number of power domains = number of resources in this aux device.
There are offsets and bits to discover number of clusters and offset for
each cluster level controls.
The TPMI documentation can be downloaded from:
https://github.com/intel/tpmi_power_management
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Link: https://lore.kernel.org/r/20230420220514.747573-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently when the uncore_write() returns error, it is silently
ignored. Return error to user space when uncore_write() fails.
Fixes: 49a474c7ba ("platform/x86: Add support for Uncore frequency control")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230418153230.679094-1-srinivas.pandruvada@linux.intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
Make Intel uncore frequency driver support to client processor starting
from Alder Lake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230330145939.1022261-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230313182918.1312597-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make Intel uncore frequency driver support Emerald Rapids by adding its
CPU model to the match table.
Emerald Rapids uncore frequency control is the same as in Sapphire
Rapids.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace the open-code with sysfs_emit() to simplify the code.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220923063314.239146-1-ye.xingchen@zte.com.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Loading this driver in guests results in unchecked MSR access error for
MSR 0x620.
There is no use of reading and modifying package/die scope uncore MSRs
in guests. So check for CPU feature X86_FEATURE_HYPERVISOR to prevent
loading of this driver in guests.
Fixes: dbce412a77 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215870
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220427100304.2562990-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the uncore_freq_common_init() return one on success and
zero on failure. There is only one caller and it has a "forgot to set
the error code" bug. Change uncore_freq_common_init() to return
negative error codes which makes the code simpler and avoids this kind
of bug in the future.
Fixes: dbce412a77 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220304131925.GG28739@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Split the current driver in two parts:
- Common part: All the commom function other than enumeration function.
- Enumeration/HW specific part: The current enumeration using CPU model
is left in the old module. This uses service of common driver to register
sysfs objects. Also provide callbacks for MSR access related to uncore.
- Add MODULE_DEVICE_TABLE to uncore-frequency.c
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-5-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a new sysfs attribute "current_freq_khz" to display current uncore
frequency. This value is read from MSR 0x621.
Root user permission is required to read uncore current frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use of sysfs API is always preferable over using kobject calls to create
attributes. Remove usage of kobject_init_and_add() and use
sysfs_create_group(). To create relationship between sysfs attribute
and uncore instance use device_attribute*, which is defined per
uncore instance.
To create uniform locking for both read and write attributes take
lock in the sysfs callbacks, not in the actual functions where
the MSRs are read or updated.
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move the current driver from platform/x86/intel/uncore-frequency.c
to platform/x86/intel/uncore-frequency/uncore-frequency.c.
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
