Host drivers can create partial hives per guest by disabling xgmi sharing
between certain peers in the main hive.
Typically, these partial hives are fully connected per guest session.
In the event that the host makes a mistake by adding a non-shared node
to a guest session, have the KFD reflect sharing disabled by severing
the IO link.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: James Yao <yiqing.yao@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On a hive, NPS request is placed by the first one for all devices in the
hive. If the request fails, mark the mode as UNKNOWN so that subsequent
devices on unload don't request it. Also, fix the mutex double lock
issue in error condition, should have been mutex_unlock.
Fixes: ee52489d12 ("drm/amdgpu: Place NPS mode request on unload")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When reset on initialization is requested, wait for the reset to finish.
In cases where module is loaded after boot, this makes sure all
initialization work is done after a successful return of modprobe.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ramesh Errabolu <ramesh.errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a user has requested NPS mode switch, place the request through PSP
during unload of the driver. For devices which are part of a hive, all
requests are placed together. If one of them fails, revert back to the
current NPS mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a common interface in GMC to request NPS mode through PSP. Also add
a variable in hive and gmc control to track the last requested mode.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use XGMI hive information to rely on resetting XGMI devices on
initialization rather than using mgpu structure. mgpu structure may have
other devices as well.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <feifxu@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop pending_reset flag in gmc block. Instead use init level to
determine which type of init is preferred - in this case MINIMAL.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- amdgpu_ras_error_statistic_ue_count()
- amdgpu_ras_error_statistic_ce_count()
- amdgpu_ras_error_statistic_de_count()
The parameter 'err_addr' is no longer used since following patch.
Fixes: a7e8467fbe ("drm/amdgpu: Remove unused code")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace the legacy interface with amdgpu_dpm_set_pm_policy to set XGMI
PLPD mode. Also, xgmi_plpd_policy sysfs node is not used by any client.
Remove that as well.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear warning that using uninitialized variable current_node.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check more possible ext error codes.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
retire unused aca_bank_report data structure.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
refine aca error cache for xgmi v6.4.0
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new types to distinguish between ACA error type and smu mca type.
e.g.:
the ACA_ERROR_TYPE_DEFERRED is not matched any smu mca valid bank
channel, so add new type 'aca_smu_type' to distinguish aca error type
and smu mca type.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use new ACA macro to instead of MCA
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add xgmi v6.4.0 ACA driver support
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Use the mirrored topology info to fill links for VF.
The new solution is required to simplify and optimize host driver logic.
Only use the new solution for VFs that support full duplex and
extended_peer_link_info otherwise the info would be incomplete.
2. avoid calling extended_link_info on VF as its not supported
Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By catting the xgmi_port_num sysfs node, it prints out the info in the
format of <src node id>:<src port num> -> <dst node id>:<dst port num>
for one xgmi link.
For example, in case of 4 sockets fully and evenly connected setup, it
would be like as below for the first node in the hive.
01:02 -> 02:03
01:03 -> 02:02
01:07 -> 03:04
01:04 -> 03:07
01:06 -> 04:05
01:05 -> 04:06
Based on the fact that there is two xgmi links between each socket pair,
"01:02 -> 02:03" means that the current socket in question use the port 2
to connect with port 3 of the second node in the hive and so on.
v2: print out the src/dst node id for each xgmi link (lijo)
v3: replace the current_node++ with +1 to align with dst node (le)
and use the dev_err instead of pr_err (lijo)
v4: fix checkpatch warning (alex)
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add pcs xgmi v6.4.0 ras support
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set_xgmi_plpd_mode may be unsupported and this isn't error, no need to
print warning for it.
v2: add ret2 to save the status of psp_ras_trigger_error.
Suggested-by: lijo.lazar@amd.com
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reset/query RAS error status and count.
v2: use XGMI IP version instead of WAFL version.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplify the code.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace with set_plpd_mode uniformly for places to use.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This identifies the physical ordering of devices in the hive
v2: fix compilation issue
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an inline function for version check. Gives more flexibility to
handle any format changes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return -ENOMEM, when there is no sufficient dynamically allocated memory
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add these two dev attrs for xgmi info details which is helpful for
developers checking the xgmi topology by catting the sys file directly.
Take 4 cards with xgmi connection as an example, get the num_hops for each
device or node through xmig_hive_info dir like,
cat /sys/bus/pci/devices/0000:41:00.0/xgmi_hive_info/node1/num_hops
will return "00 41 41 41" where "00" stands for the hops to node1 itself
and "41" is the hops in hex format to every other node in the same hive.
There are node1/node2/node3/node4 representing 4 cards in the hive.
The same for num_links dev attr.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can specify injected instances by the mask. For backward
compatibility, the mask value is incorporated into sub block index
without interface change of RAS TA.
User uses logical mask and driver should convert it to physical value
before sending it to RAS TA.
v2: update parameter name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix backward compatibility issue to stay with
the old name of xgmi_wafl node.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To align with other IP blocks.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is xgmi3x16 pcs error status for aldebaran, driver should
check xgmi3x16 pcs error status field instead of gopx16 pcs error
status field.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pcs error count should be determined by PCS ERROR status and
PCS ERROR MASK registers, only PCS ERROR status register can not
refect error counts accurately.
Changed from V1:
remove clean noncorrectable mask registers
optimize query pcs error status
Changed from V2:
remove check mask_value bits
correct set value corresponding bit
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_get_xgmi_hive(), we should not call kfree() after
kobject_put() as the PUT will call kfree().
In amdgpu_device_ip_init(), we need to check the returned *hive*
which can be NULL before we dereference it.
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clean up some inconsistent indentings
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2178
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV configuration, host driver control the reset method(either FLR or
heavier chain reset). The host will notify the guest individually with FLR
message if individual GPU within the hive need to be reset. So for guest
side, no need to use hive->reset_domain to replace the original per
device reset_domain
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip set_topology_info as xgmi TA will now block it
and host needs to program it.
Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-By : Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V1:
The amdgpu_xgmi_remove_device function will send unload command
to psp through psp ring to terminate xgmi, but psp ring has been
destroyed in psp_hw_fini.
V2:
1. Change the commit title.
2. Restore amdgpu_xgmi_remove_device to its original calling location.
Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to
psp_hw_fini.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi_ras is only initialized when host to GPU interface
is PCIE. in such case, xgmi23 is disabled and protected
by security firmware. Host access will results to
security violation
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define amdgpu_ras_block_late_fini_default in amdgpu_ras.c as
.ras_fini common function, which is called when
.ras_fini of ras block isn't initialized.
2. Remove the code of using amdgpu_ras_block_late_fini to
initialize .ras_fini in ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove redundant calls of amdgpu_ras_block_late_fini in xgmi ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Move the variables of ras block instance members from
specific xxx_ras_fini to general ras_fini call.
2. Function calls inside the modules only use parameters
passed from xxx_ras_fini instead of ras block instance
members.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify .ras_fini function pointer parameter so that
we can remove redundant intermediate calls in some
ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
-----BEGIN PGP SIGNATURE-----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=HuwD
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
1. Move calling ras block instance members from module internal
function to the top calling xxx_ras_late_init.
2. Module internal function calls can only use parameter variables
of xxx_ras_late_init instead of ras block instance members.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify .ras_late_init function pointer parameter so that
it can remove redundant intermediate calls in some ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimize amdgpu_xgmi_ras_late_init/amdgpu_xgmi_ras_fini function code.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define amdgpu_ras_block_late_init to create sysfs nodes
and interrupt handles.
2. Define amdgpu_ras_block_late_fini to remove sysfs nodes
and interrupt handles.
3. Replace ras block variable members in struct
amdgpu_ras_block_object with struct ras_common_if, which
can make it easy to associate each ras block instance
with each ras block functional interface.
4. Add .ras_cb to struct amdgpu_ras_block_object.
5. Change each ras block to fit for the changement of struct
amdgpu_ras_block_object.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
