Bspec 21257 says "DDIA PHY is the comp master, so it must
not be un-initialized if other combo PHYs are in use". Here
we are shutting down all phys, so it's not strictly required.
However let's be consistent on deinitializing things in the
reversed order we initialized them.
v2: simplify protection for enum port being unsigned in future
v3: spell out reverse rather than rev
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114011509.3667-2-lucas.demarchi@intel.com
These are the only places that assume ports A and B are the ones with
combo phy. Let's use intel_port_is_combophy() there to make sure
it checks for combo phy ports the same way everywhere.
v2: define for_each_combo_port() helper to check the ports
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114011509.3667-1-lucas.demarchi@intel.com
- Fix Bugzilla #108712: Fix incorrect EU count report from kernel
- Fix to account for scale factor when calculating initial phase on scaled output
- Avoid too trigger-happy HPD storm detection and fix a race and an OOPS for MST systems.
- Relocation race fix for Gen4/5
- A couple ICL fixes and dependencies for above Fixes:.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115164709.GA13430@jlahtine-desk.ger.corp.intel.com
- A bunch of meson fixes for this (Allwinner) platform.
- Establish a git repo for Intel pin control in MAINTAINERS.
-----BEGIN PGP SIGNATURE-----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=1FKi
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- A bunch of fixes for the Allwinner meson platform
- Establish a git repo for Intel pin control in MAINTAINERS
* tag 'pinctrl-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: Add tree link for Intel pin control driver
pinctrl: meson: fix meson8b ao pull register bits
pinctrl: meson: fix meson8 ao pull register bits
pinctrl: meson: fix gxl ao pull register bits
pinctrl: meson: fix gxbb ao pull register bits
pinctrl: meson: fix pinconf bias disable
While adding SiI9022A support to the iwg23s board, it came
up that when the HDMI transmitter is in pass through mode the
device is not compliant with the I2C specification anymore,
as it requires a far bigger tbuf, due to a delay the HDMI
transmitter is adding when relaying the STOP condition on the
monitor i2c side of things.
When not providing an appropriate delay after the STOP condition
the i2c bus would get stuck. Also, any other traffic on the bus
while talking to the monitor may cause the transaction to fail
or even cause issues with the i2c bus as well.
I2c-gates seemed to reach consent as a possible way to address
these issues, and as such this patch is implementing a solution
based on that. Since others are clearly relying on the current
implementation of the driver, this patch won't require any DT
changes.
Since we don't want any interference during the DDC Bus
Request/Grant procedure and while talking to the monitor, we
have to use the adapter locking primitives rather than the
i2c-mux locking primitives.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541505156-8097-1-git-send-email-fabrizio.castro@bp.renesas.com
- omap: Instantiate dss children in omapdss instead of mach (Laurent)
Other:
- htmldocs build warning (Sean)
- MST NULL deref fix (Stanislav)
- omap: Various runtime ref gets on probe/bind (Laurent)
- omap: Fix to the above dss children patch (Tony)
Cc: Sean Paul <sean@poorly.run>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tony Lindgren <tony@atomide.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlvsiL8ACgkQlvcN/ahK
Bwr1AQgAirnD41L7FDT2Y0sEBw2FH7MDlj8jw5Bb3qssaKCF/rqEKSG7Sx89n6os
idnPGonkRw8NOM10RMcSxJsG5PZK3lYzxU4QNrXOx+pqOsO/MUXvzMwSfLOK547s
BJTwIzgwh+ogR5yxH797IVZv1H5+DIavp7DPBc6J7e6ARLwJi5ZNBLVKCskPv8yX
Wvoo+pQFvtj7RCMHowtiiCmd6ryscsupEh3cYlHWxzcxCl0uIPOui9sxpet/60VI
4LgLCjAVd7VdzzQuMBbxkx2vFw9Z542ouBR9hk7WTYgzYt1gK2Xuc6h2fdX1g4Vk
jyhdGCvmhUZtxP96ahAunKxrb6/IjQ==
=f89R
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-11-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Cross-subsystem:
- omap: Instantiate dss children in omapdss instead of mach (Laurent)
Other:
- htmldocs build warning (Sean)
- MST NULL deref fix (Stanislav)
- omap: Various runtime ref gets on probe/bind (Laurent)
- omap: Fix to the above dss children patch (Tony)
Cc: Sean Paul <sean@poorly.run>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114204542.GA52569@art_vandelay
reorder structure of 297, 594 N values to group Audio Sample Frequencies
together to make updating from HDMI specification easier.
V2: Match patch 1/2 version
V3: Arrange by sample freq, then pixel clock.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541019295-20016-1-git-send-email-clinton.a.taylor@intel.com
To get the initial phase correct we need to account for the scale
factor as well. I forgot this initially and was mostly looking at
heavily upscaled content where the minor difference between -0.5
and the proper initial phase was not readily apparent.
And let's toss in a comment that tries to explain the formula
a little bit.
v2: The initial phase upper limit is 1.5, not 24.0!
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 0a59952b24 ("drm/i915: Configure SKL+ scaler initial phase correctly")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com
Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit e7a278a329)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
While removing .palette_offsets, I removed the commas after
.trans_offsets in the macros, but failed to remove the line continuation
backslashes.
While at it, also remove another extra comma to be in line with the
other related macros.
Fixes: 74c1e82642 ("drm/i915: remove palette_offsets from device info in favor of _PICK()")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114112130.22264-1-jani.nikula@intel.com
Use intel_plane_destroy_state in intel_plane_free to free the state.
Also fix intel_plane_alloc() to use __drm_atomic_helper_plane_reset(),
to get sane defaults from the atomic core.
This is needed to get the correct alpha value and blend mode from the
core, and any new default values added from new properties.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: b208152556 ("drm/i915: Add plane alpha blending support, v2.")
[mlankhorst: Update commit description to mention alpha blend support]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113092804.13304-1-maarten.lankhorst@linux.intel.com
I just got a new GDP Win2 device with an updated firmware, which still
requires this quirk to get the rotation right, so add the new firmware
date to the quirk matching table.
This should go to drm-misc-next.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018193136.4910-1-krisman@collabora.co.uk
Currently, efi_mem_reserve_persistent() may not be called from atomic
context, since both the kmalloc() call and the memremap() call may
sleep.
The kmalloc() call is easy enough to fix, but the memremap() call
needs to be moved into an init hook since we cannot control the
memory allocation behavior of memremap() at the call site.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181114175544.12860-6-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The new memory EFI reservation feature we introduced to allow memory
reservations to persist across kexec may trigger an unbounded number
of calls to memblock_reserve(). The memblock subsystem can deal with
this fine, but not before memblock resizing is enabled, which we can
only do after paging_init(), when the memory we reallocate the array
into is actually mapped.
So break out the memreserve table processing into a separate routine
and call it after paging_init() on arm64. On ARM, because of limited
reviewing bandwidth of the maintainer, we cannot currently fix this,
so instead, disable the EFI persistent memreserve entirely on ARM so
we can fix it later.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181114175544.12860-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
24d7c494ce ("efi/arm-stub: Round up FDT allocation to mapping size")
increased the allocation size for the FDT image created by the stub to a
fixed value of 2 MB, to simplify the former code that made several
attempts with increasing values for the size. This is reasonable
given that the allocation is of type EFI_LOADER_DATA, which is released
to the kernel unless it is explicitly memblock_reserve()d by the early
boot code.
However, this allocation size leaked into the 'size' field of the FDT
header metadata, and so the entire allocation remains occupied by the
device tree binary, even if most of it is not used to store device tree
information.
So call fdt_pack() to shrink the FDT data structure to its minimum size
after populating all the fields, so that the remaining memory is no
longer wasted.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.12+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 24d7c494ce ("efi/arm-stub: Round up FDT allocation to mapping size")
Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
3ea86495ae ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT")
deferred the unmap of the early mapping of the UEFI memory map to
accommodate the ACPI BGRT code, which looks up the memory type that
backs the BGRT table to validate it against the requirements of the UEFI spec.
Unfortunately, this causes problems on ARM, which does not permit
early mappings to persist after paging_init() is called, resulting
in a WARN() splat. Since we don't support the BGRT table on ARM anway,
let's revert ARM to the old behaviour, which is to take down the
early mapping at the end of efi_init().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 3ea86495ae ("efi/arm: preserve early mapping of UEFI memory ...")
Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
9dbbedaa61 ("efi: Make efi_rts_work accessible to efi page fault handler")
converted 'efi_rts_work' from an auto variable to a global variable.
However, when submitting the work, INIT_WORK_ONSTACK() was still used,
causing the following complaint from debugobjects:
ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated.
Change the macro to just INIT_WORK() to eliminate the warning.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 9dbbedaa61 ("efi: Make efi_rts_work accessible to efi page fault handler")
Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Drop stale DT binding for the arm_big_little_dt driver removed
recently (Sudeep Holla).
- Fix up error handling in the imx6q cpufreq driver to make it
report voltage scaling failures (Anson Huang).
- Fix two issues in the cpufreq documentation (Viresh Kumar,
Zhao Wei Liew).
- Fix ARM cpuidle driver initialization regression from the 4.19
time frame and rework the driver registration part of it to
simplify code (Ulf Hansson).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=RD7r
-----END PGP SIGNATURE-----
Merge tag 'pm-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These remove a stale DT entry left behind after recent removal of a
cpufreq driver without users, fix up error handling in the imx6q
cpufreq driver, fix two issues in the cpufreq documentation, and
update the ARM cpufreq driver.
Specifics:
- Drop stale DT binding for the arm_big_little_dt driver removed
recently (Sudeep Holla).
- Fix up error handling in the imx6q cpufreq driver to make it report
voltage scaling failures (Anson Huang).
- Fix two issues in the cpufreq documentation (Viresh Kumar, Zhao Wei
Liew).
- Fix ARM cpuidle driver initialization regression from the 4.19 time
frame and rework the driver registration part of it to simplify
code (Ulf Hansson)"
* tag 'pm-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ARM: cpuidle: Convert to use cpuidle_register|unregister()
ARM: cpuidle: Don't register the driver when back-end init returns -ENXIO
dt-bindings: cpufreq: remove stale arm_big_little_dt entry
Documentation: cpufreq: Correct a typo
cpufreq: imx6q: add return value check for voltage scale
Documentation: cpu-freq: Frequencies aren't always sorted
This is mostly a set of minor and obvious fixes (three in one of the
new drivers). The only substantial change is to move the ufs to the
blk-mq now that the merge window fixed the suspend/resume issues with
blk-mq.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW+rtiiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishR9AAQC0/z2K
IIUFGVqA3yG9fy2njzGyYFuruqqAL1PKySmzDwD+NBUGV6V27bHMfJhVC/0TM+nN
dCbuc3FT9rlKH8ot3/k=
=EvLF
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is mostly a set of minor and obvious fixes (three in one of the
new drivers).
The only substantial change is to move the ufs to the blk-mq now that
the merge window fixed the suspend/resume issues with blk-mq"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Initialize port speed to avoid setting lower speed
Revert "scsi: ufs: Disable blk-mq for now"
scsi: NCR5380: Return false instead of NULL
scsi: qla2xxx: Fix a typo in MODULE_PARM_DESC
scsi: hisi_sas: Remove set but not used variable 'dq_list'
scsi: myrs: only build on little-endian platforms
scsi: myrs: avoid stack overflow warning
scsi: lpfc: fix remoteport access
scsi: myrb: fix sprintf buffer overflow warning
scsi: target/core: Avoid that a kernel oops is triggered when COMPARE AND WRITE fails
Drivers:
- cmos: stop exporting alarms when not supported
- hctosys: correctly report range error
- pcf2127: fix a memory leak
-----BEGIN PGP SIGNATURE-----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=B3f6
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC driver fixes from Alexandre Belloni:
- cmos: stop exporting alarms when not supported
- hctosys: correctly report range error
- pcf2127: fix a memory leak
* tag 'rtc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_write
rtc: hctosys: Add missing range error reporting
rtc: cmos: Do not export alarm rtc_ops when we do not support alarms
c2856ae2f3 ("blk-mq: quiesce queue before freeing queue") has
already fixed this race, however the implied synchronize_rcu()
in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
performance regression.
Then 1311326cf4 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
tried to quiesce queue for avoiding unnecessary synchronize_rcu()
only when queue initialization is done, because it is usual to see
lots of inexistent LUNs which need to be probed.
However, turns out it isn't safe to quiesce queue only when queue
initialization is done. Because when one SCSI command is completed,
the user of sending command can be waken up immediately, then the
scsi device may be removed, meantime the run queue in scsi_end_request()
is still in-progress, so kernel panic can be caused.
In Red Hat QE lab, there are several reports about this kind of kernel
panic triggered during kernel booting.
This patch tries to address the issue by grabing one queue usage
counter during freeing one request and the following run queue.
Fixes: 1311326cf4 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
Cc: Andrew Jones <drjones@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: stable <stable@vger.kernel.org>
Cc: jianchao.wang <jianchao.w.wang@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/qxl/qxl_release.c: In function 'qxl_release_fence_buffer_objects':
drivers/gpu/drm/qxl/qxl_release.c:431:17: warning:
variable 'qbo' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/qxl/qxl_release.c:430:24: warning:
variable 'driver' set but not used [-Wunused-but-set-variable]
'qbo' not used since commit f2c24b83ae ("drm/ttm: flip the switch, and convert
to dma_fence")
And 'driver' never used since introduction in
8002db6336 ("qxl: convert qxl driver to proper use for reservations")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1542029556-88107-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/qxl/qxl_object.c: In function 'qxl_bo_kunmap_atomic_page':
drivers/gpu/drm/qxl/qxl_object.c:189:21: warning:
variable 'map' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1541821486-40631-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The allocation for vfpriv is being leaked on an error return path,
fix this by kfree'ing it before returning.
Detected by CoverityScan, CID#1475380 ("Resource Leak")
Fixes: 6a37c49a94 ("drm/virtio: Handle context ID allocation errors")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181107203122.6861-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To reflect the (backward compatible) changes in the uabi we are bumping
the driver's version.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-5-robert.foss@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the execbuf call receives an in-fence it will get the dma_fence
related to that fence fd and wait on it before submitting the draw call.
On the out-fence side we get fence returned by the submitted draw call
and attach it to a sync_file and send the sync_file fd to userspace. On
error -1 is returned to userspace.
VIRTGPU_EXECBUF_FENCE_FD_IN & VIRTGPU_EXECBUF_FENCE_FD_OUT
are supported at the simultaneously and can be flagged
for simultaneously.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-4-robert.foss@collabora.com
Suggested-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new field called fence_fd that will be used by userspace to send
in-fences to the kernel and receive out-fences created by the kernel.
This uapi enables virtio to take advantage of explicit synchronization of
dma-bufs.
There are two new flags:
* VIRTGPU_EXECBUF_FENCE_FD_IN to be used when passing an in-fence fd.
* VIRTGPU_EXECBUF_FENCE_FD_OUT to be used when requesting an out-fence fd
The execbuffer IOCTL is now read-write to allow the userspace to read the
out-fence.
On error -1 should be returned in the fence_fd field.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-3-robert.foss@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Refactor fence creation, add fences to relevant GPU
operations and add cursor helper functions.
This removes the potential for allocation failures from the
cmd_submit and atomic_commit paths.
Now a fence will be allocated first and only after that
will we proceed with the rest of the execution.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-2-robert.foss@collabora.com
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Even though PW#1 and the MISC_IO power wells are managed by the
DMC firmware (toggled dynamically if conditions allow it) from the
driver's POV they are always on if the display core is initialized
(always restored by DMC to the enabled state after exiting from DC5/6
for instance b/c of MMIO access). Accordingly we can just mark them as
always-on and remove the special casing for them during state
verification (thus enabling verification for these power wells too).
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109145822.15446-3-imre.deak@intel.com
We can just use a proper true/false initializer even for bitfields,
which is more descriptive.
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109145822.15446-2-imre.deak@intel.com
A DMC bug on GEN9 big core machines fails to restore the driver's
request bits for the PW1 and MISC_IO power wells after a DC5/6
entry->exit sequence. As a consequence the driver's subsequent check for
the enabled status of these power wells will fail, as the check
considers the power wells being enabled only if both the status and
request bits are set. To work around this borrow the request bits from
BIOS's own request register in which DMC forces on the request bits when
exiting from DC5/6.
This fixes a problem reported by Ramalingam, where HDCP init failed,
since PW1 reported itself as being disabled, while in reality it was
enabled.
Reported-by: Ramalingam C <ramalingam.c@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109145822.15446-1-imre.deak@intel.com
Register DBUF_CTL_S2 is read and it's value is not used. As
there is no explanation why we should prime the hardware with
read, remove it as spurious.
Fixes: aa9664ffe8 ("drm/i915/icl: Enable 2nd DBuf slice only when needed")
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109140924.2663-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 8577c319b6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This got duplicated on introducing icl workarounds.
Fix by using the older definition and moving the wa bit
definition there. No functional changes.
v3: avoid fixes tag, whitespace (Chris)
References: 908ae05173 ("drm/i915/icl: WaDisCtxReload")
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109145333.10570-1-mika.kuoppala@linux.intel.com
Register DBUF_CTL_S2 is read and it's value is not used. As
there is no explanation why we should prime the hardware with
read, remove it as spurious.
Fixes: aa9664ffe8 ("drm/i915/icl: Enable 2nd DBuf slice only when needed")
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109140924.2663-1-mika.kuoppala@linux.intel.com
I think I'm probably the one who argued in favor of having separate
implementations for both PCHs, but the calculations are actually the
same, the clocks are the same and the only difference is that on ICP
we write the numerator to the register.
I have previously suggested to kill cnp_rawclk() and keep the
icp_rawclk() style, but Ville gave some good arguments that what's in
this patch may be the better choice.
v2: Switch numerator to 1 from 1000 and adjust calculations
accordingly (Ville).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-3-paulo.r.zanoni@intel.com
Although CNP names this field "Counter Fraction", what we write to the
register is really the denominator for the fractional part of the
divider, not the fractional part (and the field description even says
that). The ICP spec renamed the field to "Counter Fraction
Denominator", which makes a lot more sense. Use the more complete ICL
naming because we will merge the CNP and ICP functions into a single
one, which will introduce the concept of the numerator. That will make
a lot more sense when you read the "num/frac = den" calculation.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-2-paulo.r.zanoni@intel.com
BSpec was updated and now there's no more "subtract 1" to the
Microsecond Counter Divider field.
It seems this should help fixing some GMBUS issues. I'm not aware of
any specific open bug that could be solved by this patch.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-1-paulo.r.zanoni@intel.com
We accidentially set the huge flag on the parent instead of the childs.
This caused some VM faults under memory pressure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
the clk value should be tranferred to MHz first and
then transfer to uint16. otherwise, the clock value
will be truncated.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
