Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2018-09-25
This series contains updates to i40e and xsk.
Mariusz fixes an issue where the VF link state was not being updated
properly when the PF is down or up. Also cleaned up the promiscuous
configuration during a VF reset.
Patryk simplifies the code a bit to use the variables for PF and HW that
are declared, rather than using the VSI pointers. Cleaned up the
message length parameter to several virtchnl functions, since it was not
being used (or needed).
Harshitha fixes two potential race conditions when trying to change VF
settings by creating a helper function to validate that the VF is
enabled and that the VSI is set up.
Sergey corrects a double "link down" message by putting in a check for
whether or not the link is up or going down.
Björn addresses an AF_XDP zero-copy issue that buffers passed
from userspace to the kernel was leaked when the hardware descriptor
ring was torn down. A zero-copy capable driver picks buffers off the
fill ring and places them on the hardware receive ring to be completed at
a later point when DMA is complete. Similar on the transmit side; The
driver picks buffers off the transmit ring and places them on the
transmit hardware ring.
In the typical flow, the receive buffer will be placed onto an receive
ring (completed to the user), and the transmit buffer will be placed on
the completion ring to notify the user that the transfer is done.
However, if the driver needs to tear down the hardware rings for some
reason (interface goes down, reconfiguration and such), the userspace
buffers cannot be leaked. They have to be reused or completed back to
userspace.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement get/put function for blocks that only take/release the reference
and perform deallocation. These functions are intended to be used by
unlocked rules update path to always hold reference to block while working
with it. They use on new fine-grained locking mechanisms introduced in
previous patches in this set, instead of relying on global protection
provided by rtnl lock.
Extract code that is common with tcf_block_detach_ext() into common
function __tcf_block_put().
Extend tcf_block with rcu to allow safe deallocation when it is accessed
concurrently.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparation for removing rtnl lock dependency from rules update path,
change tcf block reference counter type to refcount_t to allow modification
by concurrent users.
In block put function perform decrement and check reference counter once to
accommodate concurrent modification by unlocked users. After this change
tcf_chain_put at the end of block put function is called with
block->refcnt==0 and will deallocate block after the last chain is
released, so there is no need to manually deallocate block in this case.
However, if block reference counter reached 0 and there are no chains to
release, block must still be deallocated manually.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement function to take reference to Qdisc that relies on rcu read lock
instead of rtnl mutex. Function only takes reference to Qdisc if reference
counter isn't zero. Intended to be used by unlocked cls API.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, Qdisc API functions assume that users have rtnl lock taken. To
implement rtnl unlocked classifiers update interface, Qdisc API must be
extended with functions that do not require rtnl lock.
Extend Qdisc structure with rcu. Implement special version of put function
qdisc_put_unlocked() that is called without rtnl lock taken. This function
only takes rtnl lock if Qdisc reference counter reached zero and is
intended to be used as optimization.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current implementation of qdisc_destroy() decrements Qdisc reference
counter and only actually destroy Qdisc if reference counter value reached
zero. Rename qdisc_destroy() to qdisc_put() in order for it to better
describe the way in which this function currently implemented and used.
Extract code that deallocates Qdisc into new private qdisc_destroy()
function. It is intended to be shared between regular qdisc_put() and its
unlocked version that is introduced in next patch in this series.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rtnl lock is encapsulated in netlink and cannot be accessed by other
modules directly. This means that reference counted objects that rely on
rtnl lock cannot use it with refcounter helper function that atomically
releases decrements reference and obtains mutex.
This patch implements simple wrapper function around refcount_dec_and_lock
that obtains rtnl lock if reference counter value reached 0.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 46053c7368.
This change breaks architectures setting up dma_ops in their own magic
way and not using arch_setup_dma_ops, so revert it.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
XSK UMEM is strongly single producer single consumer so reuse of
frames is challenging. Add a simple "stash" of FILL packets to
reuse for drivers to optionally make use of. This is useful
when driver has to free (ndo_stop) or resize a ring with an active
AF_XDP ZC socket.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
This is required to resolve dependencies of the next series of RDMA
patches.
* branch 'mellanox/mlx5-next':
net/mlx5: Update mlx5_ifc with DEVX UID bits
net/mlx5: Set uid as part of DCT commands
net/mlx5: Set uid as part of SRQ commands
net/mlx5: Set uid as part of SQ commands
net/mlx5: Set uid as part of RQ commands
net/mlx5: Set uid as part of QP commands
net/mlx5: Set uid as part of CQ commands
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* (2) fixes for the dax error handling updates that were merged for
v4.19-rc1. My mails to Al have been bouncing recently, so I do not have
his ack but the uaccess change is of the trivial / obviously correct
variety. The address_space_operations fixes a regression.
* A filesystem-dax fix to correct the zero page lookup to be compatible
with non-x86 (mips and s390) architectures.
-----BEGIN PGP SIGNATURE-----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=mAaH
-----END PGP SIGNATURE-----
erge tag 'libnvdimm-fixes-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Dan writes:
"libnvdimm/dax for 4.19-rc6
* (2) fixes for the dax error handling updates that were merged for
v4.19-rc1. My mails to Al have been bouncing recently, so I do not have
his ack but the uaccess change is of the trivial / obviously correct
variety. The address_space_operations fixes a regression.
* A filesystem-dax fix to correct the zero page lookup to be compatible
with non-x86 (mips and s390) architectures."
* tag 'libnvdimm-fixes-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: Add missing address_space_operations
uaccess: Fix is_source param for check_copy_size() in copy_to_iter_mcsafe()
filesystem-dax: Fix use of zero page
Introduce the concept of mapping physical memory locations that
are normal memory. The new type UIO_MEM_IOVA are similar to
existing UIO_MEM_PHYS but the backing memory is not marked as uncached.
Also, indent related switch to the currently used style.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UIO driver needs the ring buffer to be persistent(reused)
across open/close. Split the allocation and setup of ring buffer
out of vmbus_open. For normal usage vmbus_open/vmbus_close there
are no changes; only impacts uio_hv_generic which needs to keep
ring buffer memory and reuse when application restarts.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid going from struct page to virt address (and back) by just
keeping pointer to the allocated pages instead of virt address.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rather than passing relid and then looking up the channel.
Pass the channel directly, since caller already knows it.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. Addition of interface to fetch estimated power from the firmware
corresponding to each OPP of a device
2. Cleanup using strlcpy to ensure NULL-terminated strings for name
strings instead of relying on the firmware to do the same
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ux6I
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers
SCMI updates for v4.20
1. Addition of interface to fetch estimated power from the firmware
corresponding to each OPP of a device
2. Cleanup using strlcpy to ensure NULL-terminated strings for name
strings instead of relying on the firmware to do the same
* tag 'scmi-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: add a getter for power of performance states
firmware: arm_scmi: use strlcpy to ensure NULL-terminated strings
Signed-off-by: Olof Johansson <olof@lixom.net>
Coresight architecture defines CLAIM tags for a device to negotiate
control of the components (external agent vs self-hosted). Each device
has a pair of registers (CLAIMSET & CLAIMCLR) for managing the CLAIM
tags. However, the protocol for the CLAIM tags is IMPLEMENTATION DEFINED.
PSCI has recommendations for the use of the CLAIM tags to negotiate
controls for external agent vs self-hosted use. This patch implements
the recommended protocol by PSCI.
The claim/disclaim operations are performed from the device specific
drivers. The disadvantage is that the calls are sprinkled in each driver,
but this makes the operation much simpler.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In coresight perf mode, we need to prepare the sink before
starting a session, which is done via set_buffer call back.
We then proceed to enable the tracing. If we fail to start
the session successfully, we leave the sink configuration
unchanged. In order to make the operation atomic and to
avoid yet another call back to clear the buffer, we get
rid of the "set_buffer" call back and pass the buffer details
via enable() call back to the sink.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now we issue an update_buffer() and reset_buffer() call backs
in succession when we stop tracing an event. The update_buffer is
supposed to check the status of the buffer and make sure the ring buffer
is updated with the trace data. And we store information about the
size of the data collected only to be consumed by the reset_buffer
callback which always follows the update_buffer. This was originally
designed for handling future IPs which could trigger a buffer overflow
interrupt. This patch gets rid of the reset_buffer callback altogether
and performs the actions in update_buffer, making it return the size
collected. We can always add the support for handling the overflow
interrupt case later.
This removes some not-so pretty hack (storing the new head in the
size field for snapshot mode) and cleans it up a little bit.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The platform code parses the component connections and populates
a platform-description of the output connections in arrays of fields
(which is never freed). This is later copied in the coresight_register
to a newly allocated area, represented by coresight_connection(s).
This patch cleans up the code dealing with connections by making
use of the "coresight_connection" structure right at the platform
code and lets the generic driver simply re-use information provided
by the platform.
Thus making it reader friendly as well as avoiding the wastage of
unused memory.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Version bump conflict in batman-adv, take what's in net-next.
iavf conflict, adjustment of netdev_ops in net-next conflicting
with poll controller method removal in net.
Signed-off-by: David S. Miller <davem@davemloft.net>
All UVC descriptors use little-endian format, update the data structures
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Since these are trivially handled by the .domain_{get,set}_attr
callbacks when relevant, we can streamline struct iommu_ops for
everyone.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Turns out we need the pixel format fixup not only for the addfb ioctl,
but also for fbdev emulation code.
Ideally we would place it in drm_mode_legacy_fb_format(). That would
create alot of churn though, and most drivers don't care because they
never ever run on a big endian platform. So add a new
drm_driver_legacy_fb_format() function instead which looks at the
mode_config->quirk_addfb_prefer_host_byte_order flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-2-kraxel@redhat.com
Add a new config option CONFIG_INTEL_IOMMU_DEBUGFS and do the base
enabling for Intel IOMMU debugfs.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Co-Developed-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add new register definitions added in the VT-d 3.0 specification. Also
include registers that were missing previously.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To reuse the static functions and the struct declarations, move them to
corresponding header files and export the needed functions.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This changes UAPI, breaking iwd and libell:
ell/key.c: In function 'kernel_dh_compute':
ell/key.c:205:38: error: 'struct keyctl_dh_params' has no member named 'private'; did you mean 'dh_private'?
struct keyctl_dh_params params = { .private = private,
^~~~~~~
dh_private
This reverts commit 8a2336e549.
Fixes: 8a2336e549 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Randy Dunlap <rdunlap@infradead.org>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: James Morris <jmorris@namei.org>
cc: "Serge E. Hallyn" <serge@hallyn.com>
cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: <stable@vger.kernel.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave writes:
"Networking fixes:
1) Fix multiqueue handling of coalesce timer in stmmac, from Jose
Abreu.
2) Fix memory corruption in NFC, from Suren Baghdasaryan.
3) Don't write reserved bits in ravb driver, from Kazuya Mizuguchi.
4) SMC bug fixes from Karsten Graul, YueHaibing, and Ursula Braun.
5) Fix TX done race in mvpp2, from Antoine Tenart.
6) ipv6 metrics leak, from Wei Wang.
7) Adjust firmware version requirements in mlxsw, from Petr Machata.
8) Fix autonegotiation on resume in r8169, from Heiner Kallweit.
9) Fixed missing entries when dumping /proc/net/if_inet6, from Jeff
Barnhill.
10) Fix double free in devlink, from Dan Carpenter.
11) Fix ethtool regression from UFO feature removal, from Maciej
Żenczykowski.
12) Fix drivers that have a ndo_poll_controller() that captures the
cpu entirely on loaded hosts by trying to drain all rx and tx
queues, from Eric Dumazet.
13) Fix memory corruption with jumbo frames in aquantia driver, from
Friedemann Gerold."
* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (79 commits)
net: mvneta: fix the remaining Rx descriptor unmapping issues
ip_tunnel: be careful when accessing the inner header
mpls: allow routes on ip6gre devices
net: aquantia: memory corruption on jumbo frames
tun: remove ndo_poll_controller
nfp: remove ndo_poll_controller
bnxt: remove ndo_poll_controller
bnx2x: remove ndo_poll_controller
mlx5: remove ndo_poll_controller
mlx4: remove ndo_poll_controller
i40evf: remove ndo_poll_controller
ice: remove ndo_poll_controller
igb: remove ndo_poll_controller
ixgb: remove ndo_poll_controller
fm10k: remove ndo_poll_controller
ixgbevf: remove ndo_poll_controller
ixgbe: remove ndo_poll_controller
bonding: use netpoll_poll_dev() helper
netpoll: make ndo_poll_controller() optional
rds: Fix build regression.
...
While iommu_get_domain_for_dev() is the robust way for arbitrary IOMMU
API callers to retrieve the domain pointer, for DMA ops domains it
doesn't scale well for large systems and multi-queue devices, since the
momentary refcount adjustment will lead to exclusive cacheline contention
when multiple CPUs are operating in parallel on different mappings for
the same device.
In the case of DMA ops domains, however, this refcounting is actually
unnecessary, since they already imply that the group exists and is
managed by platform code and IOMMU internals (by virtue of
iommu_group_get_for_dev()) such that a reference will already be held
for the lifetime of the device. Thus we can avoid the bottleneck by
providing a fast lookup specifically for the DMA code to retrieve the
default domain it already knows it has set up - a simple read-only
dereference plays much nicer with cache-coherency protocols.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As an optimisation for PCI devices, there is always first attempt
been made to allocate iova from SAC address range. This will lead
to unnecessary attempts, when there are no free ranges
available. Adding fix to track recently failed iova address size and
allow further attempts, only if requested size is lesser than a failed
size. The size is updated when any replenish happens.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A patch from Ricardo got me thinking about some gpio chip
semantics so let's drop in some comments to make things
more clear around that.
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Implement bus specific support for the fsl-mc bus including
registering arm_smmu_ops and bus specific device add operations.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu-map property is also used by devices with fsl-mc. This
patch moves the of_pci_map_rid to generic location, so that it
can be used by other busses too.
'of_pci_map_rid' is renamed here to 'of_map_rid' and there is no
functional change done in the API.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add DEVX information to WQ, SRQ, CQ, TIR, TIS, QP,
RQ, XRCD, PD, MKEY and MCG.
Each object that is created/destroyed/modified via verbs will
be stamped with a UID based on its user context. This is already
done for DEVX objects commands.
This will enable the firmware to enforce the usage of kernel objects
from the DEVX flow by validating that the same UID is used and the
resources are really related to the same user.
The addition of *_valid fields are needed to distinguish
how various addresses are passed.
For non-DEVX callers, all those fields will be zero.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Set uid as part of DCT commands so that the firmware can manage the
DCT object in a secured way.
That will enable using a DCT that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Set uid as part of SRQ commands so that the firmware can manage the
SRQ object in a secured way.
That will enable using an SRQ that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Set uid as part of SQ commands so that the firmware can manage the
SQ object in a secured way.
That will enable using an SQ that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Set uid as part of RQ commands so that the firmware can manage the
RQ object in a secured way.
That will enable using an RQ that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Set uid as part of QP commands so that the firmware can manage the
QP object in a secured way.
That will enable using a QP that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Set uid as part of CQ commands so that the firmware can manage the CQ
object in a secured way.
The firmware should mark this CQ with the given uid so that it can
be used later on only by objects with the same uid.
Upon DEVX flows that use this CQ (e.g. create QP command), the
pointed CQ must have the same uid as of the issuer uid command.
When a command is issued with uid=0 it means that the issuer of the
command is trusted (i.e. kernel), in that case any pointed object
can be used regardless of its uid.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
On processors with multi-engine crypto accelerators, it is possible that
multiple records get encrypted in parallel and their encryption
completion is notified to different cpus in multicore processor. This
leads to the situation where tls_encrypt_done() starts executing in
parallel on different cores. In current implementation, encrypted
records are queued to tx_ready_list in tls_encrypt_done(). This requires
addition to linked list 'tx_ready_list' to be protected. As
tls_decrypt_done() could be executing in irq content, it is not possible
to protect linked list addition operation using a lock.
To fix the problem, we remove linked list addition operation from the
irq context. We do tx_ready_list addition/removal operation from
application context only and get rid of possible multiple access to
the linked list. Before starting encryption on the record, we add it to
the tail of tx_ready_list. To prevent tls_tx_records() from transmitting
it, we mark the record with a new flag 'tx_ready' in 'struct tls_rec'.
When record encryption gets completed, tls_encrypt_done() has to only
update the 'tx_ready' flag to true & linked list add operation is not
required.
The changed logic brings some other side benefits. Since the records
are always submitted in tls sequence number order for encryption, the
tx_ready_list always remains sorted and addition of new records to it
does not have to traverse the linked list.
Lastly, we renamed tx_ready_list in 'struct tls_sw_context_tx' to
'tx_list'. This is because now, the some of the records at the tail are
not ready to transmit.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
send netlink notification if neigh_update results in NTF_ROUTER
change and if NEIGH_UPDATE_F_ISROUTER is on. Also move the
NTF_ROUTER change function into a helper.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add additional counters that will store the bytes/packets processed by
hardware. These will be exported through the netlink interface for
displaying by the iproute2 tc tool
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new hardware specific basic counter, TCA_STATS_BASIC_HW. This can
be used to count packets/bytes processed by hardware offload.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't care when we suspend but some our children do. In order to
avoid tagging various modules with SYSC_QUIRK_RESOURCE_PROVIDER, let's
do it automatically by tagging modules that are busy on suspend for
noirq suspend. This way we can just do module detection on define DEBUG.
Note that we still need to keep SYSC_QUIRK_LEGACY_IDLE flag around so
the our legacy single-child devices that set pm_runtime_irq_safe() can
manage the interconnect target module themselves.
Signed-off-by: Tony Lindgren <tony@atomide.com>
