[why]
We want to know if new crtc state is enabling MPO configuration before
enabling it.
[how]
Detect if both primary and overlay planes are enabled on the same CRTC.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those are not today pulled by the sphinx doc, but better be ready.
Signed-off-by: Yann Dirson <ydirson@free.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN301 is capable of running seamless boot
if keep_stolen_vga_memory is not set.
[How]
Add a helper to check whether an ASIC can support
seamless boot and set it based on base driver flags.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To process SET_CONFIG transactions with DMUB using inbox1 and
outbox1 mail boxes.
[How]
1) DMUB posts SET_CONFIG reply as an Outbox1 message of type
DMUB_OUT_CMD__SET_CONFIG_REPLY.
2) The dmub async to sync mechanism for AUX is modified to accommodate
SET_CONFIG commands for both command issue and reply code paths.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] When a connector is unplugged, dpms is forced off so that some
connector allocations are cleared off. This is done outside the commit
sequence from the userspace. This causes HUBP blank. Due to the blank
hubp, a non blocking commit which queues flip will encounter a timeout
waiting for the flip_done because prior to writing the surface flip
address, hubp was in blank.
[How] Add a marker to DM's crtc state and use this field to indicate
whether dpms was forced off during an HPD. Check for this marker before
queuing the flip.
Reviewed-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, we will try to get dm.dc_lock in handle_hpd_rx_irq() when
link lost happened, which is risky and could cause deadlock.
e.g. If we are under procedure to enable MST streams and then monitor
happens to toggle short hpd to notify link lost, then
handle_hpd_rx_irq() will get blocked due to stream enabling flow has
dc_lock. However, under MST, enabling streams involves communication
with remote sinks which need to use handle_hpd_rx_irq() to handle
sideband messages. Thus, we have deadlock here.
[How]
Target is to have handle_hpd_rx_irq() finished as soon as possilble.
Hence we can react to interrupt quickly. Besides, we should avoid to
grabe dm.dc_lock within handle_hpd_rx_irq() to avoid deadlock situation.
Firstly, revert patches which introduced to use dm.dc_lock in
handle_hpd_rx_irq():
* commit ("drm/amd/display: NULL pointer error during ")
* commit ("drm/amd/display: Only one display lights up while using MST")
* commit ("drm/amd/display: take dc_lock in short pulse handler only")
Instead, create work to handle irq events which needs dm.dc_lock.
Besides:
* Create struct hpd_rx_irq_offload_work_queue for each link to handle
its short hpd events
* Avoid to handle link lost/ automated test if the link is disconnected
* Defer dc_lock needed works in dc_link_handle_hpd_rx_irq(). This
function should just handle simple stuff for us (e.g. DPCD R/W).
However, deferred works should still be handled by the order that
dc_link_handle_hpd_rx_irq() used to be.
* Change function name dm_handle_hpd_rx_irq() to
dm_handle_mst_sideband_msg() to be more specific
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To add support for HPD interrupt handling from DMUB.
HPD interrupt could be triggered from outbox1 from DMUB
[HOW]
1) Use queue_work to handle hpd task from outbox1
2) Add handle_hpd_irq_helper to share interrupt handling code
between legacy and DMUB HPD from outbox1
3) Added DMUB HPD handling in dmub_srv_stat_get_notification().
HPD handling callback function and wake up the DMUB thread.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PSR can disable the HUBP along with the OTG when PSR is active.
We'll hit a pageflip timeout when the OTG is disable because we're no
longer updating the CRTC vblank counter and the pflip high IRQ will
not fire on the flip.
In order to flip the page flip timeout occur we should modify the
enter/exit conditions to match DRM requirements.
[How]
Use our deferred handlers for DRM vblank control to notify DMCU(B)
when it can enable or disable PSR based on whether vblank is disabled or
enabled respectively.
We'll need to pass along the stream with the notification now because
we want to access the CRTC state while the CRTC is locked to get the
stream state prior to the commit.
Retain a reference to the stream so it remains safe to continue to
access and release that reference once we're done with it.
Enable/disable logic follows what we were previously doing in
update_planes.
The workqueue has to be flushed before programming streams or planes
to ensure that we exit out of idle optimizations and PSR before
these events occur if necessary.
To keep the skip count logic the same to avoid FBCON PSR enablement
requires copying the allow condition onto the DM IRQ parameters - a
field that we can actually access from the worker.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The current implementation for idle optimization support only has a
single work item that gets reshuffled into the system workqueue
whenever we receive an enable or disable event.
We can have mismatched events if the work hasn't been processed or if
we're getting control events from multiple displays at once.
This fixes this issue and also makes the implementation usable for
PSR control - which will be addressed in another patch.
[How]
We need to be able to flush remaining work out on demand for driver stop
and psr disable so create a driver specific workqueue instead of using
the system one. The workqueue will be single threaded to guarantee the
ordering of enable/disable events.
Refactor the queue to allocate the control work and deallocate it
after processing it.
Pass the acrtc directly to make it easier to handle psr enable/disable
in a later patch.
Rename things to indicate that it's not just MALL specific.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On platforms that support multiple backlights, register
each one separately. This lets us manage them independently
rather than registering a single backlight and applying the
same settings to both.
v2: fix typo:
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After panel power up, if PSR entry attempted too early,
PSR state may get stuck in transition.
This could happen if the panel is not ready
to respond to the SDP PSR entry message.
In this case dmub f/w is unable to abort PSR entry
since abortion is not permitted after the SDP has been sent.
[How]
Skip 5 pageflips before PSR enable.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For each CRTC state, check the size of Gamma and Degamma LUTs so
unexpected and larger sizes wouldn't slip through.
TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes
v2: fix assignments in if clauses, Mark's email.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add debugfs entry to force dsc decoding at PCON when DSC capable
external RX is connected. In such case, it is free to test DSC
decoding at external RX or at PCON.
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And cache the value. These can be used by the backlight callbacks
and modesetting functions.
v2: rebase on latest backlight changes.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1337
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To process AUX transactions with DMUB using inbox1 and outbox1 mail boxes.
[How]
1) Added inbox1 command DMUB_CMD__DP_AUX_ACCESS to issue AUX commands
to DMUB in dc_process_dmub_aux_transfer_async(). DMUB processes AUX cmd
with DCN and sends reply back in an outbox1 message triggering an
outbox1 interrupt to driver.
2) In existing driver implementation, AUX commands are processed
synchronously by configuring DCN reg. But in DMUB AUX, driver sends an
inbox1 message and waits for a conditional variable (CV) which will be
signaled by outbox1 ISR.
3) DM will retrieve Outbox1 message and send back reply to upper layer
and complete the AUX command
Signed-off-by: Jude Shih <shenshih@amd.com>
Reviewed-by: Hanghong Ma <Hanghong.Ma@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently the assumption is that we are using a single eDP
connector so there will only be one backlight object. Need changes
to allow brightness update and reading for multiple eDP connectors.
[how]
- register a single device
- turn backlight link from a pointer to an array of pointers
- update brightness of all eDP links at the same time when request
is registered
- read brightness level only of the primary eDP panel
- turn current_backlight_pwm and targer_backlight_pwm debugfs enteries
into per connector enteries.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was missing when this structure was updated.
Fixes: 46a83eba27 ("drm/amd/display: Add debugfs to control DMUB trace buffer events")
Reviewed-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For debugging reasons it can be beneficial to disable any hotplug and DP shortpulse interrupt handling.
[How]
Expose a debugfs to set a flag to bypass HPD IRQ handling and skip IRQ handling if flag is set.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Commit 1c85f3db77
("drm/amd/display: Add kernel doc to crc_rd_wrk
field") adds kernel doc for crc_rd_wrk field in
amdgpu_dm.h but it's incorrectly formatted.
Make htmldocs warns:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:398: warning:
Incorrect use of kernel-doc format: * @crc_rd_wrk
[How]
Tweak the kernel doc for crc_rd_wrk.
Fixes: 1c85f3db77 ("drm/amd/display: Add kernel doc to crc_rd_wrk field")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we have to debug VRR issues, we usually want to know the current
refresh rate; for this reason, it is handy to have a way to check in
real-time the refresh rate value. This commit introduces a kernel trace
that can provide such information.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to log DMCUB trace buffer events as Linux kernel traces.
[How]
Register an IRQ handler for DMCUB outbox0 interrupt in amdgpu_dm,
and log the messages in the DMCUB tracebuffer to a new DMCUB
TRACE_EVENT as soon as we receive the outbox0 IRQ from DMCUB FW.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Receive warning message below:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:380: warning: Function
parameter or member 'crc_rd_wrk' not described in 'amdgpu_display_manager'
[How]
Add documentation for crc_rd_wrk.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since this is a "revert of a revert", the end effect is that freesync
video is back to its original state, the way it was before the first
revert.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to have a debugfs interface to enable or disable DMCUB
trace buffer events.
[How]
Add debugfs interface to enable or disable trace buffer events.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC needs to communicate with PM FW through GPU memory. In order
to do so we need to be able to allocate memory from within DC.
[How]
Call amdgpu_bo_create_kernel to allocate GPU memory and use a
list in amdgpu_display_manager to track our allocations so we
can clean them up later.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This temporarily reverts freesync video patches since it causes regression with
eDP displays. This patch is a squashed revert of the following patches:
6f59f229f8 ("drm/amd/display: Skip modeset for front porch change")
d10cd527f5 ("drm/amd/display: Add freesync video modes based on preferred modes")
0eb1af2e82 ("drm/amd/display: Add module parameter for freesync video mode")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
To read back crc by sending command READ_ROI_CRC to
PSP TA to ask it to read out crc of crc window.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To support feature that calculates CRTC CRC value on specific
region (crc window).
[How]
1. Use debugfs to specify crtc crc window
2. Use vline0 IRQ to write crtc crc window
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Find out that referring to crtc_state->crc_src is not thread safe.
Move crc_src from dm_crtc_state to dm_irq_params to fix this.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu DM handles INTERRUPT_LOW_IRQ_CONTEXT interrupt(hpd, hpd_rx) by using work
queue and uses single work_struct. If new interrupt is recevied before the
previous handler finished, new interrupts(same type) will be discarded and
driver just sends "amdgpu_dm_irq_schedule_work FAILED" message out. If some
important hpd, hpd_rx related interrupts are missed by driver the hot (un)plug
devices may cause system hang or instability, such as issues with system
resume from S3 sleep with mst device connected.
This patch dynamically allocates new amdgpu_dm_irq_handler_data for new
interrupts if previous INTERRUPT_LOW_IRQ_CONTEXT interrupt work has not been
handled. So the new interrupt works can be queued to the same workqueue_struct,
instead of discard the new interrupts. All allocated amdgpu_dm_irq_handler_data
are put into a single linked list and will be reused after.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While possible for userspace to create and add custom mode based off the
optimized mode for the connected display which differs only in front porch
timing, this patch set adds a list of common video modes in advance.
The list of common video refresh rates is small, well known and the optimized
mode has specific requirements to be able to enable HW frame doubling and
tripling so it makes most sense to create the modes that video players will need
in advance. The optimized mode matches the preferred mode resolution but has the
highest refresh rate available to enable the largest front porch extension.
[How]
Find the optimized mode and store it on the connector so we can check it
later during our optimized modeset.
Prepopulate the mode list with a list of common video mades based on the
optimized mode (but with a longer front porch) if the panel doesn't support a
variant of the mode natively.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
mutex_lock() was introduced in dm_disable_vblank(), which could
be called in an IRQ context. Waiting in IRQ would cause issues
like kernel lockup, etc.
[How]
Handle code that requires mutex lock on a different thread.
v2: squash in compilation fix without CONFIG_DRM_AMD_DC_DCN (Alex)
v3: squash in warning fix (Wei)
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Add necessary support for Freesync HDMI in Linux DM
[How]
- Support Freesync HDMI by calling DC interace
- Report Freesync capability to vrr_range debugfs from DRM
- Depends on coming DMCU/DMUB firmware to enable feature
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c920888c60.
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Cc: Bindu R <Bindu.R@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 6ae09fa491.
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Cc: Bindu R <Bindu.R@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 71338cb4a7 ("drm/amd/display: enable idle optimizations for linux
(MALL stutter)") adds active_vblank_irq_count to amdgpu_display_manager
in ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h.
The kerneldoc is incorrectly formatted, and make htmldocs warns:
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:
340: warning: Incorrect use of kernel-doc format: * @active_vblank_irq_count
379: warning: Function parameter or member 'active_vblank_irq_count' not described in 'amdgpu_display_manager'
Tweak the kerneldoc for active_vblank_irq_count.
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can only use this feature when the display is idle. When active vblank
irq count is 0 we know all the displays are idle.
[How]
-Add a active vblank irq counter
-Update the counter when we enable/disable vblank irq
-if vblank irq count is 0 we can consider mall stutter
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nick Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add documentation for crc window.
Fixes: c920888c60 ("drm/amd/display: Expose new CRC window property")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
[Why]
We call add display multiple times because DESIRED->ENABLED cannot
happen instantaneously. We can't compare the new_state/old_state to
avoid this because on unplug we set the state to DESIRED and on hotplug
the state will still be DESIRED.
[How]
Add a flag to dm_connector_state to keep track of when to enable or
disable HDCP
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Instead of calculating CRC on whole frame, add flexibility to calculate
CRC on specific frame region.
[How]
Add few crc window coordinate properties. By default, CRC is calculated
on whole frame unless user space specifies the CRC calculation window.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to trigger atomic check on connector when
DSC debugfs properties are changed. The previous
method was reverted because it accessed connector
properties unsafely and would also heavily
impact performance.
[How]
Add a flag for forcing DSC update in CRTC state
and add connector to the state if the flag is set.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This moves the tiling_flags to the framebuffer creation.
This way the time of the "tiling" decision is the same as it
would be with modifiers.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dm_comressor_info -> dm_compressor_info
The kernel-doc markup is right, but the struct itself
and their references contain a typo.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As warned when running "make htmldocs":
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:345: warning: Function parameter or member 'force_timing_sync' not described in 'amdgpu_display_manager'
This new struct member was not documented at kernel-doc markup.
Fixes: 3d4e52d0cf ("drm/amd/display: Add debugfs for forcing stream timing sync")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When comparing current DSC timing settings with enforced through
debugfs we have to calculate number of both vertical and horisontal
slices. So instead of doing that every time we should just
use number of slices rather than setting its dimensions.
[how]
In connector's dsc preferred settings structure change slice height
and slice width parameters to number of slices vertical and horisontal.
Also calculate number of slices in debugfs rather in create_stream_for_sink.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For debug purposes we want not to enable DSC on certain connectors
even if algorithm deesires to do so, instead it should enable DSC
on other capable connectors or fail the atomic check.
[how]
Adding the third option to connector's debugfs entry dsc_clock_en.
Accepted inputs:
0x0 - connector is using default DSC enablement policy
0x1 - force enable DSC on the connector, if it supports DSC
0x2 - force disable DSC on the connector, if DSC is supported
Ex. # echo 0x2 > /sys/kernel/debug/dri/0/DP-1/dsc_clock_en
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Currently commit_tail holds global locks and wait for dependencies which is
against the DRM API contracts. Inorder to fix this, IRQ handler should be able
to run without having to access crtc state. Required parameters are copied over
so that they can be directly accessed from the interrupt handler
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
