The existing pKVM code attempts to advertise CSV2/3 using values
initialized to 0, but never set. To advertise CSV2/3 to protected
guests, pass the CSV2/3 values to hyp when initializing hyp's
view of guests' ID_AA64PFR0_EL1.
Similar to non-protected KVM, these are system-wide, rather than
per cpu, for simplicity.
Fixes: 6c30bfb18d ("KVM: arm64: Add handlers for protected VM System Registers")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20230404152321.413064-1-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When introduced, IRQFD resampling worked on POWER8 with XICS. However
KVM on POWER9 has never implemented it - the compatibility mode code
("XICS-on-XIVE") misses the kvm_notify_acked_irq() call and the native
XIVE mode does not handle INTx in KVM at all.
This moved the capability support advertising to platforms and stops
advertising it on XIVE, i.e. POWER9 and later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220504074807.3616813-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Having the timer IRQs duplicated into each vcpu isn't great, and
becomes absolutely awful with NV. So let's move these into
the per-VM arch_timer_vm_data structure.
This simplifies a lot of code, but requires us to introduce a
mutex so that we can reason about userspace trying to change
an interrupt number while another vcpu is running, something
that wasn't really well handled so far.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-12-maz@kernel.org
And this is the moment you have all been waiting for: setting the
counter offset from userspace.
We expose a brand new capability that reports the ability to set
the offset for both the virtual and physical sides.
In keeping with the architecture, the offset is expressed as
a delta that is substracted from the physical counter value.
Once this new API is used, there is no going back, and the counters
cannot be written to to set the offsets implicitly (the writes
are instead ignored).
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-8-maz@kernel.org
Being able to lock/unlock all vcpus in one go is a feature that
only the vgic has enjoyed so far. Let's be brave and expose it
to the world.
Reviewed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230330174800.2677007-7-maz@kernel.org
There are various bits of VM-scoped data that can only be configured
before the first call to KVM_RUN, such as the hypercall bitmaps and
the PMU. As these fields are protected by the kvm->lock and accessed
while holding vcpu->mutex, this is yet another example of lock
inversion.
Change out the kvm->lock for kvm->arch.config_lock in all of these
instances. Opportunistically simplify the locking mechanics of the
PMU configuration by holding the config_lock for the entirety of
kvm_arm_pmu_v3_set_attr().
Note that this also addresses a couple of bugs. There is an unguarded
read of the PMU version in KVM_ARM_VCPU_PMU_V3_FILTER which could race
with KVM_ARM_VCPU_PMU_V3_SET_PMU. Additionally, until now writes to the
per-vCPU vPMU irq were not serialized VM-wide, meaning concurrent calls
to KVM_ARM_VCPU_PMU_V3_IRQ could lead to a false positive in
pmu_irq_is_valid().
Cc: stable@vger.kernel.org
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-4-oliver.upton@linux.dev
kvm->lock must be taken outside of the vcpu->mutex. Of course, the
locking documentation for KVM makes this abundantly clear. Nonetheless,
the locking order in KVM/arm64 has been wrong for quite a while; we
acquire the kvm->lock while holding the vcpu->mutex all over the shop.
All was seemingly fine until commit 42a90008f8 ("KVM: Ensure lockdep
knows about kvm->lock vs. vcpu->mutex ordering rule") caught us with our
pants down, leading to lockdep barfing:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc7+ #19 Not tainted
------------------------------------------------------
qemu-system-aar/859 is trying to acquire lock:
ffff5aa69269eba0 (&host_kvm->lock){+.+.}-{3:3}, at: kvm_reset_vcpu+0x34/0x274
but task is already holding lock:
ffff5aa68768c0b8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x8c/0xba0
which lock already depends on the new lock.
Add a dedicated lock to serialize writes to VM-scoped configuration from
the context of a vCPU. Protect the register width flags with the new
lock, thus avoiding the need to grab the kvm->lock while holding
vcpu->mutex in kvm_reset_vcpu().
Cc: stable@vger.kernel.org
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Link: https://lore.kernel.org/kvmarm/f6452cdd-65ff-34b8-bab0-5c06416da5f6@arm.com/
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-3-oliver.upton@linux.dev
KVM/arm64 had the lock ordering backwards on vcpu->mutex and kvm->lock
from the very beginning. One such example is the way vCPU resets are
handled: the kvm->lock is acquired while handling a guest CPU_ON PSCI
call.
Add a dedicated lock to serialize writes to kvm_vcpu_arch::{mp_state,
reset_state}. Promote all accessors of mp_state to {READ,WRITE}_ONCE()
as readers do not acquire the mp_state_lock. While at it, plug yet
another race by taking the mp_state_lock in the KVM_SET_MP_STATE ioctl
handler.
As changes to MP state are now guarded with a dedicated lock, drop the
kvm->lock acquisition from the PSCI CPU_ON path. Similarly, move the
reader of reset_state outside of the kvm->lock and instead protect it
with the mp_state_lock. Note that writes to reset_state::reset have been
demoted to regular stores as both readers and writers acquire the
mp_state_lock.
While the kvm->lock inversion still exists in kvm_reset_vcpu(), at least
now PSCI CPU_ON no longer depends on it for serializing vCPU reset.
Cc: stable@vger.kernel.org
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230327164747.2466958-2-oliver.upton@linux.dev
All kvm_arch_vm_ioctl() implementations now only deal with "int"
types as return values, so we can change the return type of these
functions to use "int" instead of "long".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20230208140105.655814-7-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kvm-arm64/nv-prefix:
: Preamble to NV support, courtesy of Marc Zyngier.
:
: This brings in a set of prerequisite patches for supporting nested
: virtualization in KVM/arm64. Of course, there is a long way to go until
: NV is actually enabled in KVM.
:
: - Introduce cpucap / vCPU feature flag to pivot the NV code on
:
: - Add support for EL2 vCPU register state
:
: - Basic nested exception handling
:
: - Hide unsupported features from the ID registers for NV-capable VMs
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
arm64: Add ARM64_HAS_NESTED_VIRT cpufeature
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Convert CPACR_EL1_TTA to the new, generated system register
: definitions.
:
: - Serialize toggling CPACR_EL1.SMEN to avoid unexpected exceptions when
: accessing SVCR in the host.
:
: - Avoid quiescing the guest if a vCPU accesses its own redistributor's
: SGIs/PPIs, eliminating the need to IPI. Largely an optimization for
: nested virtualization, as the L1 accesses the affected registers
: rather often.
:
: - Conversion to kstrtobool()
:
: - Common definition of INVALID_GPA across architectures
:
: - Enable CONFIG_USERFAULTFD for CI runs of KVM selftests
KVM: arm64: Fix non-kerneldoc comments
KVM: selftests: Enable USERFAULTFD
KVM: selftests: Remove redundant setbuf()
arm64/sysreg: clean up some inconsistent indenting
KVM: MMU: Make the definition of 'INVALID_GPA' common
KVM: arm64: vgic-v3: Use kstrtobool() instead of strtobool()
KVM: arm64: vgic-v3: Limit IPI-ing when accessing GICR_{C,S}ACTIVER0
KVM: arm64: Synchronize SMEN on vcpu schedule out
KVM: arm64: Kill CPACR_EL1_TTA definition
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/psci-relay-fixes:
: Fixes for CPU on/resume with pKVM, courtesy Quentin Perret.
:
: A consequence of deprivileging the host is that pKVM relays PSCI calls
: on behalf of the host. pKVM's CPU initialization failed to fully
: initialize the CPU's EL2 state, which notably led to unexpected SVE
: traps resulting in a hyp panic.
:
: The issue is addressed by reusing parts of __finalise_el2 to restore CPU
: state in the PSCI relay.
KVM: arm64: Finalise EL2 state from pKVM PSCI relay
KVM: arm64: Use sanitized values in __check_override in nVHE
KVM: arm64: Introduce finalise_el2_state macro
KVM: arm64: Provide sanitized SYS_ID_AA64SMFR0_EL1 to nVHE
* kvm-arm64/virtual-cache-geometry:
: Virtualized cache geometry for KVM guests, courtesy of Akihiko Odaki.
:
: KVM/arm64 has always exposed the host cache geometry directly to the
: guest, even though non-secure software should never perform CMOs by
: Set/Way. This was slightly wrong, as the cache geometry was derived from
: the PE on which the vCPU thread was running and not a sanitized value.
:
: All together this leads to issues migrating VMs on heterogeneous
: systems, as the cache geometry saved/restored could be inconsistent.
:
: KVM/arm64 now presents 1 level of cache with 1 set and 1 way. The cache
: geometry is entirely controlled by userspace, such that migrations from
: older kernels continue to work.
KVM: arm64: Mark some VM-scoped allocations as __GFP_ACCOUNT
KVM: arm64: Normalize cache configuration
KVM: arm64: Mask FEAT_CCIDX
KVM: arm64: Always set HCR_TID2
arm64/cache: Move CLIDR macro definitions
arm64/sysreg: Add CCSIDR2_EL1
arm64/sysreg: Convert CCSIDR_EL1 to automatic generation
arm64: Allow the definition of UNKNOWN system register fields
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a new ARM64_HAS_NESTED_VIRT feature to indicate that the
CPU has the ARMv8.3 nested virtualization capability, together
with the 'kvm-arm.mode=nested' command line option.
This will be used to support nested virtualization in KVM.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: moved the command-line option to kvm-arm.mode]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230209175820.1939006-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Generally speaking, any memory allocations that can be associated with a
particular VM should be charged to the cgroup of its process.
Nonetheless, there are a couple spots in KVM/arm64 that aren't currently
accounted:
- the ccsidr array containing the virtualized cache hierarchy
- the cpumask of supported cpus, for use of the vPMU on heterogeneous
systems
Go ahead and set __GFP_ACCOUNT for these allocations.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20230206235229.4174711-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The robots amongts us have started spitting out irritating emails about
random errors such as:
<quote>
arch/arm64/kvm/arm.c:2207: warning: expecting prototype for Initialize Hyp().
Prototype was for kvm_arm_init() instead
</quote>
which makes little sense until you finally grok what they are on about:
comments that look like a kerneldoc, but that aren't.
Let's address this before I get even more irritated... ;-)
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/63e139e1.J5AHO6vmxaALh7xv%25lkp@intel.com
Link: https://lore.kernel.org/r/20230207094321.1238600-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We will need a sanitized copy of SYS_ID_AA64SMFR0_EL1 from the nVHE EL2
code shortly, so make sure to provide it with a copy.
Signed-off-by: Quentin Perret <qperret@google.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230201103755.1398086-2-qperret@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Drop kvm_arch_check_processor_compat() and its support code now that all
architecture implementations are nops.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20221130230934.1014142-33-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_init() and kvm_arch_exit() now that all implementations
are nops.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tag kvm_arm_init() and its unique helper as __init, and tag data that is
only ever modified under the kvm_arm_init() umbrella as read-only after
init.
Opportunistically name the boolean param in kvm_timer_hyp_init()'s
prototype to match its definition.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-21-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do arm/arch specific initialization directly in arm's module_init(), now
called kvm_arm_init(), instead of bouncing through kvm_init() to reach
kvm_arch_init(). Invoking kvm_arch_init() is the very first action
performed by kvm_init(), so from a initialization perspective this is a
glorified nop.
Avoiding kvm_arch_init() also fixes a mostly benign bug as kvm_arch_exit()
doesn't properly unwind if a later stage of kvm_init() fails. While the
soon-to-be-deleted comment about compiling as a module being unsupported
is correct, kvm_arch_exit() can still be called by kvm_init() if any step
after the call to kvm_arch_init() succeeds.
Add a FIXME to call out that pKVM initialization isn't unwound if
kvm_init() fails, which is a pre-existing problem inherited from
kvm_arch_exit().
Making kvm_arch_init() a nop will also allow dropping kvm_arch_init() and
kvm_arch_exit() entirely once all other architectures follow suit.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Undo everything done by init_subsystems() if a later initialization step
fails, i.e. unregister perf callbacks in addition to unregistering the
power management notifier.
Fixes: bfa79a8054 ("KVM: arm64: Elevate hypervisor mappings creation at EL2")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Teardown hypervisor mode if vector slot setup fails in order to avoid
leaking any allocations done by init_hyp_mode().
Fixes: b881cdce77 ("KVM: arm64: Allocate hyp vectors statically")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For a number of historical reasons, the KVM/arm64 hotplug setup is pretty
complicated, and we have two extra CPUHP notifiers for vGIC and timers.
It looks pretty pointless, and gets in the way of further changes.
So let's just expose some helpers that can be called from the core
CPUHP callback, and get rid of everything else.
This gives us the opportunity to drop a useless notifier entry,
as well as tidy-up the timer enable/disable, which was a bit odd.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_hardware_setup() and kvm_arch_hardware_unsetup() now that
all implementations are nops.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
-----BEGIN PGP SIGNATURE-----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=iIPT
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.2
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on.
- Merge the pKVM shadow vcpu state tracking that allows the hypervisor
to have its own view of a vcpu, keeping that state private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB pages
only) as a prefix of the oncoming support for 4kB and 16kB pages.
- Add/Enable/Fix a bunch of selftests covering memslots, breakpoints,
stage-2 faults and access tracking. You name it, we got it, we
probably broke it.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
As a side effect, this tag also drags:
- The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring
series
- A shared branch with the arm64 tree that repaints all the system
registers to match the ARM ARM's naming, and resulting in
interesting conflicts
* kvm-arm64/pmu-unchained:
: .
: PMUv3 fixes and improvements:
:
: - Make the CHAIN event handling strictly follow the architecture
:
: - Add support for PMUv3p5 (64bit counters all the way)
:
: - Various fixes and cleanups
: .
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: arm64: PMU: Sanitise PMCR_EL0.LP on first vcpu run
KVM: arm64: PMU: Simplify PMCR_EL0 reset handling
KVM: arm64: PMU: Replace version number '0' with ID_AA64DFR0_EL1_PMUVer_NI
KVM: arm64: PMU: Make kvm_pmc the main data structure
KVM: arm64: PMU: Simplify vcpu computation on perf overflow notification
KVM: arm64: PMU: Allow PMUv3p5 to be exposed to the guest
KVM: arm64: PMU: Implement PMUv3p5 long counter support
KVM: arm64: PMU: Allow ID_DFR0_EL1.PerfMon to be set from userspace
KVM: arm64: PMU: Allow ID_AA64DFR0_EL1.PMUver to be set from userspace
KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation
KVM: arm64: PMU: Do not let AArch32 change the counters' top 32 bits
KVM: arm64: PMU: Simplify setting a counter to a specific value
KVM: arm64: PMU: Add counter_index_to_*reg() helpers
KVM: arm64: PMU: Only narrow counters that are not 64bit wide
KVM: arm64: PMU: Narrow the overflow checking when required
KVM: arm64: PMU: Distinguish between 64bit counter and 64bit overflow
KVM: arm64: PMU: Always advertise the CHAIN event
KVM: arm64: PMU: Align chained counter implementation with architecture pseudocode
arm64: Add ID_DFR0_EL1.PerfMon values for PMUv3p7 and IMP_DEF
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-vcpu-state: (25 commits)
: .
: Large drop of pKVM patches from Will Deacon and co, adding
: a private vm/vcpu state at EL2, managed independently from
: the EL1 state. From the cover letter:
:
: "This is version six of the pKVM EL2 state series, extending the pKVM
: hypervisor code so that it can dynamically instantiate and manage VM
: data structures without the host being able to access them directly.
: These structures consist of a hyp VM, a set of hyp vCPUs and the stage-2
: page-table for the MMU. The pages used to hold the hypervisor structures
: are returned to the host when the VM is destroyed."
: .
KVM: arm64: Use the pKVM hyp vCPU structure in handle___kvm_vcpu_run()
KVM: arm64: Don't unnecessarily map host kernel sections at EL2
KVM: arm64: Explicitly map 'kvm_vgic_global_state' at EL2
KVM: arm64: Maintain a copy of 'kvm_arm_vmid_bits' at EL2
KVM: arm64: Unmap 'kvm_arm_hyp_percpu_base' from the host
KVM: arm64: Return guest memory from EL2 via dedicated teardown memcache
KVM: arm64: Instantiate guest stage-2 page-tables at EL2
KVM: arm64: Consolidate stage-2 initialisation into a single function
KVM: arm64: Add generic hyp_memcache helpers
KVM: arm64: Provide I-cache invalidation by virtual address at EL2
KVM: arm64: Initialise hypervisor copies of host symbols unconditionally
KVM: arm64: Add per-cpu fixmap infrastructure at EL2
KVM: arm64: Instantiate pKVM hypervisor VM and vCPU structures from EL1
KVM: arm64: Add infrastructure to create and track pKVM instances at EL2
KVM: arm64: Rename 'host_kvm' to 'host_mmu'
KVM: arm64: Add hyp_spinlock_t static initializer
KVM: arm64: Include asm/kvm_mmu.h in nvhe/mem_protect.h
KVM: arm64: Add helpers to pin memory shared with the hypervisor at EL2
KVM: arm64: Prevent the donation of no-map pages
KVM: arm64: Implement do_donate() helper for donating memory
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/dirty-ring:
: .
: Add support for the "per-vcpu dirty-ring tracking with a bitmap
: and sprinkles on top", courtesy of Gavin Shan.
:
: This branch drags the kvmarm-fixes-6.1-3 tag which was already
: merged in 6.1-rc4 so that the branch is in a working state.
: .
KVM: Push dirty information unconditionally to backup bitmap
KVM: selftests: Automate choosing dirty ring size in dirty_log_test
KVM: selftests: Clear dirty ring states between two modes in dirty_log_test
KVM: selftests: Use host page size to map ring buffer in dirty_log_test
KVM: arm64: Enable ring-based dirty memory tracking
KVM: Support dirty ring in conjunction with bitmap
KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h
KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL
Signed-off-by: Marc Zyngier <maz@kernel.org>
As further patches will enable the selection of a PMU revision
from userspace, sample the supported PMU revision at VM creation
time, rather than building each time the ID_AA64DFR0_EL1 register
is accessed.
This shouldn't result in any change in behaviour.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-11-maz@kernel.org
Sharing 'kvm_arm_vmid_bits' between EL1 and EL2 allows the host to
modify the variable arbitrarily, potentially leading to all sorts of
shenanians as this is used to configure the VTTBR register for the
guest stage-2.
In preparation for unmapping host sections entirely from EL2, maintain
a copy of 'kvm_arm_vmid_bits' in the pKVM hypervisor and initialise it
from the host value while it is still trusted.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-23-will@kernel.org
When pKVM is enabled, the hypervisor at EL2 does not trust the host at
EL1 and must therefore prevent it from having unrestricted access to
internal hypervisor state.
The 'kvm_arm_hyp_percpu_base' array holds the offsets for hypervisor
per-cpu allocations, so move this this into the nVHE code where it
cannot be modified by the untrusted host at EL1.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-22-will@kernel.org
The initialisation of guest stage-2 page-tables is currently split
across two functions: kvm_init_stage2_mmu() and kvm_arm_setup_stage2().
That is presumably for historical reasons as kvm_arm_setup_stage2()
originates from the (now defunct) KVM port for 32-bit Arm.
Simplify this code path by merging both functions into one, taking care
to map the 'struct kvm' into the hypervisor stage-1 early on in order to
simplify the failure path.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Co-developed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-19-will@kernel.org
In preparation for handling cache maintenance of guest pages from within
the pKVM hypervisor at EL2, introduce an EL2 copy of icache_inval_pou()
which will later be plumbed into the stage-2 page-table cache
maintenance callbacks, ensuring that the initial contents of pages
mapped as executable into the guest stage-2 page-table is visible to the
instruction fetcher.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-17-will@kernel.org
The nVHE object at EL2 maintains its own copies of some host variables
so that, when pKVM is enabled, the host cannot directly modify the
hypervisor state. When running in normal nVHE mode, however, these
variables are still mirrored at EL2 but are not initialised.
Initialise the hypervisor symbols from the host copies regardless of
pKVM, ensuring that any reference to this data at EL2 with normal nVHE
will return a sensibly initialised value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-16-will@kernel.org
With the pKVM hypervisor at EL2 now offering hypercalls to the host for
creating and destroying VM and vCPU structures, plumb these in to the
existing arm64 KVM backend to ensure that the hypervisor data structures
are allocated and initialised on first vCPU run for a pKVM guest.
In the host, 'struct kvm_protected_vm' is introduced to hold the handle
of the pKVM VM instance as well as to track references to the memory
donated to the hypervisor so that it can be freed back to the host
allocator following VM teardown. The stage-2 page-table, hypervisor VM
and vCPU structures are allocated separately so as to avoid the need for
a large physically-contiguous allocation in the host at run-time.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-14-will@kernel.org
For nvhe and protected modes, the hyp stage 1 page-tables were previously
configured to have the same number of VA bits as the kernel's idmap.
However, for kernel configs with VA_BITS=52 and where the kernel is
loaded in physical memory below 48 bits, the idmap VA bits is actually
smaller than the kernel's normal stage 1 VA bits. This can lead to
kernel addresses that can't be mapped into the hypervisor, leading to
kvm initialization failure during boot:
kvm [1]: IPA Size Limit: 48 bits
kvm [1]: Cannot map world-switch code
kvm [1]: error initializing Hyp mode: -34
Fix this by ensuring that the hyp stage 1 VA size is the maximum of
what's used for the idmap and the regular kernel stage 1. At the same
time, refactor the code so that the hyp VA bits is only calculated in
one place.
Prior to 7ba8f2b2d6, the idmap was always 52 bits for a 52 VA bits
kernel and therefore the hyp stage1 was also always 52 bits.
Fixes: 7ba8f2b2d6 ("arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
[maz: commit message fixes]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221103150507.32948-2-ryan.roberts@arm.com
Enable ring-based dirty memory tracking on ARM64:
- Enable CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL.
- Enable CONFIG_NEED_KVM_DIRTY_RING_WITH_BITMAP.
- Set KVM_DIRTY_LOG_PAGE_OFFSET for the ring buffer's physical page
offset.
- Add ARM64 specific kvm_arch_allow_write_without_running_vcpu() to
keep the site of saving vgic/its tables out of the no-running-vcpu
radar.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-5-gshan@redhat.com
virt/kvm/irqchip.c is including "irq.h" from the arch-specific KVM source
directory (i.e. not from arch/*/include) for the sole purpose of retrieving
irqchip_in_kernel.
Making the function inline in a header that is already included,
such as asm/kvm_host.h, is not possible because it needs to look at
struct kvm which is defined after asm/kvm_host.h is included. So add a
kvm_arch_irqchip_in_kernel non-inline function; irqchip_in_kernel() is
only performance critical on arm64 and x86, and the non-inline function
is enough on all other architectures.
irq.h can then be deleted from all architectures except x86.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fixes for single-stepping in the presence of an async
exception as well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only
systems
- Fixes for the dirty-ring API, allowing it to work on
architectures with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmM5hQcPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDoMUP/jra4HSmujLUB5G7Op8HxuurEecOc6xtw0Af
AbDLlVc2Vs4rrdVh8GMc8D80atUAVitp8IFjdp/PzI2GTBTzWz43Gav2AbhgIJbJ
xoFVHL8LkdHKyMbq10359DqGMqhIf41OFzGwhbzcx2V4pKNkSpjbCpu3bi/+Ybjg
006ZpZc7NAU0rZgw9Flb/dhn0jw7RMc3orhoDQ4tBp1P/VhvqvgFt5bWipkvvBP7
+lQK28ujG3ghST/hKRhg6ozgy5+6NEEHMuhErMYP8nIivRchX+pWF2Lb0qGH1e+U
v2MZIZnIIUjyTV1vbYlxtltzfYmPuQ2MFNUBawI9tmlIOU9vJSCzeJS64uWK4KLV
kbmk57OfC7rQoSNJH4jaKQp0YpIktrB9Vei97t4I7NwEmkjQj6cLTgg4tQrNqTiQ
cFGeC9mE+lhFC8z1lCbna2eG631FxpPrB1SJ1/CU9wboam9dUfXGIvBPh+i2pvMZ
vcxzUZJ11y+/uhp4k8i2PBwNno0iwRXd5MinwRUs2CR5vhs8qa5y7FVWKyqKpgI2
xqr4lYTixJZL3mWkYyOQuClrTbT1zkoaPldLq6M7wvO08+QV8ryMeyKT+9s/gNQU
dcYSwBCWZaOZm2nN8/zjxRb7VqZVu3cwyXi9XXUWNTCgIe/Q/SDPbXU/Hwbgzf8X
UsQF7e9A
=aNPK
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v6.1
- Fixes for single-stepping in the presence of an async
exception as well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only
systems
- Fixes for the dirty-ring API, allowing it to work on
architectures with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
KVM_REQ_UNHALT is now unnecessary because it is replaced by the return
value of kvm_vcpu_block/kvm_vcpu_halt. Remove it.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20220921003201.1441511-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ignore kvm-arm.mode if !is_hyp_mode_available(). Specifically, we want
to avoid switching kvm_mode to KVM_MODE_PROTECTED if hypervisor mode is
not available. This prevents "Protected KVM" cpu capability being
reported when Linux is booting in EL1 and would not have KVM enabled.
Reasonably though, we should warn if the command line is requesting a
KVM mode at all if KVM isn't actually available. Allow
"kvm-arm.mode=none" to skip the warning since this would disable KVM
anyway.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220920190658.2880184-1-quic_eberman@quicinc.com
With commit 0c24e06119 ("mm: kmemleak: add rbtree and store physical
address for objects allocated with PA"), kmemleak started to put the
objects allocated with physical address onto object_phys_tree_root tree.
The kmemleak_free_part() therefore no longer worked as expected on
physically allocated objects (hyp_mem_base in this case) as it attempted to
search and remove things in object_tree_root tree.
Fix it by using kmemleak_free_part_phys() to unregister hyp_mem_base. This
fixes an immediate crash when booting a KVM host in protected mode with
kmemleak enabled.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220908130659.2021-1-yuzenghui@huawei.com
- Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK
- Tidy-up handling of AArch32 on asymmetric systems
-----BEGIN PGP SIGNATURE-----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=r5iq
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.0, take #1
- Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK
- Tidy-up handling of AArch32 on asymmetric systems
KVM does not support AArch32 on asymmetric systems. To that end, enforce
AArch64-only behavior on PMCR_EL1.LC when on an asymmetric system.
Fixes: 2122a83331 ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-2-oliver.upton@linux.dev
KVM/arm64 updates for 5.20:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
* kvm-arm64/nvhe-stacktrace: (27 commits)
: .
: Add an overflow stack to the nVHE EL2 code, allowing
: the implementation of an unwinder, courtesy of
: Kalesh Singh. From the cover letter (slightly edited):
:
: "nVHE has two modes of operation: protected (pKVM) and unprotected
: (conventional nVHE). Depending on the mode, a slightly different approach
: is used to dump the hypervisor stacktrace but the core unwinding logic
: remains the same.
:
: * Protected nVHE (pKVM) stacktraces:
:
: In protected nVHE mode, the host cannot directly access hypervisor memory.
:
: The hypervisor stack unwinding happens in EL2 and is made accessible to
: the host via a shared buffer. Symbolizing and printing the stacktrace
: addresses is delegated to the host and happens in EL1.
:
: * Non-protected (Conventional) nVHE stacktraces:
:
: In non-protected mode, the host is able to directly access the hypervisor
: stack pages.
:
: The hypervisor stack unwinding and dumping of the stacktrace is performed
: by the host in EL1, as this avoids the memory overhead of setting up
: shared buffers between the host and hypervisor."
:
: Additional patches from Oliver Upton and Marc Zyngier, tidying up
: the initial series.
: .
arm64: Update 'unwinder howto'
KVM: arm64: Don't open code ARRAY_SIZE()
KVM: arm64: Move nVHE-only helpers into kvm/stacktrace.c
KVM: arm64: Make unwind()/on_accessible_stack() per-unwinder functions
KVM: arm64: Move nVHE stacktrace unwinding into its own compilation unit
KVM: arm64: Move PROTECTED_NVHE_STACKTRACE around
KVM: arm64: Introduce pkvm_dump_backtrace()
KVM: arm64: Implement protected nVHE hyp stack unwinder
KVM: arm64: Save protected-nVHE (pKVM) hyp stacktrace
KVM: arm64: Stub implementation of pKVM HYP stack unwinder
KVM: arm64: Allocate shared pKVM hyp stacktrace buffers
KVM: arm64: Add PROTECTED_NVHE_STACKTRACE Kconfig
KVM: arm64: Introduce hyp_dump_backtrace()
KVM: arm64: Implement non-protected nVHE hyp stack unwinder
KVM: arm64: Prepare non-protected nVHE hypervisor stacktrace
KVM: arm64: Stub implementation of non-protected nVHE HYP stack unwinder
KVM: arm64: On stack overflow switch to hyp overflow_stack
arm64: stacktrace: Add description of stacktrace/common.h
arm64: stacktrace: Factor out common unwind()
arm64: stacktrace: Handle frame pointer from different address spaces
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Implements the common framework necessary for unwind() to work
for non-protected nVHE mode:
- on_accessible_stack()
- on_overflow_stack()
- unwind_next()
Non-protected nVHE unwind() is used to unwind and dump the hypervisor
stacktrace by the host in EL1
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220726073750.3219117-11-kaleshsingh@google.com
* kvm-arm64/sysreg-cleanup-5.20:
: .
: Long overdue cleanup of the sysreg userspace access,
: with extra scrubbing on the vgic side of things.
: From the cover letter:
:
: "Schspa Shi recently reported[1] that some of the vgic code interacting
: with userspace was reading uninitialised stack memory, and although
: that read wasn't used any further, it prompted me to revisit this part
: of the code.
:
: Needless to say, this area of the kernel is pretty crufty, and shows a
: bunch of issues in other parts of the KVM/arm64 infrastructure. This
: series tries to remedy a bunch of them:
:
: - Sanitise the way we deal with sysregs from userspace: at the moment,
: each and every .set_user/.get_user callback has to implement its own
: userspace accesses (directly or indirectly). It'd be much better if
: that was centralised so that we can reason about it.
:
: - Enforce that all AArch64 sysregs are 64bit. Always. This was sort of
: implied by the code, but it took some effort to convince myself that
: this was actually the case.
:
: - Move the vgic-v3 sysreg userspace accessors to the userspace
: callbacks instead of hijacking the vcpu trap callback. This allows
: us to reuse the sysreg infrastructure.
:
: - Consolidate userspace accesses for both GICv2, GICv3 and common code
: as much as possible.
:
: - Cleanup a bunch of not-very-useful helpers, tidy up some of the code
: as we touch it.
:
: [1] https://lore.kernel.org/r/m2h740zz1i.fsf@gmail.com"
: .
KVM: arm64: Get rid or outdated comments
KVM: arm64: Descope kvm_arm_sys_reg_{get,set}_reg()
KVM: arm64: Get rid of find_reg_by_id()
KVM: arm64: vgic: Tidy-up calls to vgic_{get,set}_common_attr()
KVM: arm64: vgic: Consolidate userspace access for base address setting
KVM: arm64: vgic-v2: Add helper for legacy dist/cpuif base address setting
KVM: arm64: vgic: Use {get,put}_user() instead of copy_{from.to}_user
KVM: arm64: vgic-v2: Consolidate userspace access for MMIO registers
KVM: arm64: vgic-v3: Consolidate userspace access for MMIO registers
KVM: arm64: vgic-v3: Use u32 to manage the line level from userspace
KVM: arm64: vgic-v3: Convert userspace accessors over to FIELD_GET/FIELD_PREP
KVM: arm64: vgic-v3: Make the userspace accessors use sysreg API
KVM: arm64: vgic-v3: Push user access into vgic_v3_cpu_sysregs_uaccess()
KVM: arm64: vgic-v3: Simplify vgic_v3_has_cpu_sysregs_attr()
KVM: arm64: Get rid of reg_from/to_user()
KVM: arm64: Consolidate sysreg userspace accesses
KVM: arm64: Rely on index_to_param() for size checks on userspace access
KVM: arm64: Introduce generic get_user/set_user helpers for system registers
KVM: arm64: Reorder handling of invariant sysregs from userspace
KVM: arm64: Add get_reg_by_id() as a sys_reg_desc retrieving helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
