As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them. Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is
used to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts
and indirect messaging, SCMI firmware support for pin control
and vendor specific interfaces, and TEE firmware interface
changes across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan
k230 support
- Multiple minor updates for the TI sysc bus driver, memory controllers,
hisilicon hccs and more
-----BEGIN PGP SIGNATURE-----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=4rf0
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
Testing indicates that qseecom and uefisecapp are working on both the
SC8180X Primus and Lenovo Flex 5G, providing EFI variable access.
Add the two to the allow list.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240430-uefisecapp-allowlist-sc8180x-v1-1-1a626ea9c5f1@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Crashdump collection is done based on DLOAD bits of TCSR register.
To retain other bits, scm driver need to read the register and
modify only the DLOAD bits, as other bits in TCSR may have their
own significance.
Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> # IPQ9574 and IPQ5332
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/1711042655-31948-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It is possible qcom_scm_is_available() gives wrong indication that
if __scm is initialized while __scm->dev is not and similar issue
is also possible with __scm->waitq_comp.
Fix this appropriately by the use of release barrier and read barrier
that will make sure if __scm is initialized so, is all of its field
variable.
Fixes: d0f6fa7ba2 ("firmware: qcom: scm: Convert SCM to platform driver")
Fixes: 6bf3259922 ("firmware: qcom: scm: Add wait-queue handling logic")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/1711034642-22860-4-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
QCOM_SCM_BOOT_SET_DLOAD_MODE scm command is applicable for very
older SoCs where this command is supported from firmware and
for newer SoCs, dload mode tcsr registers is used for setting
the download mode.
Currently, qcom_scm_set_download_mode() checks for availability
of QCOM_SCM_BOOT_SET_DLOAD_MODE command even for SoCs where this
is not used. Fix this by switching the condition to keep the
command availability check only if dload mode registers are not
available.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1711034642-22860-3-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It turns out that while the QSEECOM APP_SEND command has specific fields
for request and response buffers, uefisecapp expects them both to be in
a single memory region. Failure to adhere to this has (so far) resulted
in either no response being written to the response buffer (causing an
EIO to be emitted down the line), the SCM call to fail with EINVAL
(i.e., directly from TZ/firmware), or the device to be hard-reset.
While this issue can be triggered deterministically, in the current form
it seems to happen rather sporadically (which is why it has gone
unnoticed during earlier testing). This is likely due to the two
kzalloc() calls (for request and response) being directly after each
other. Which means that those likely return consecutive regions most of
the time, especially when not much else is going on in the system.
Fix this by allocating a single memory region for both request and
response buffers, properly aligning both structs inside it. This
unfortunately also means that the qcom_scm_qseecom_app_send() interface
needs to be restructured, as it should no longer map the DMA regions
separately. Therefore, move the responsibility of DMA allocation (or
mapping) to the caller.
Fixes: 759e7a2b62 ("firmware: Add support for Qualcomm UEFI Secure Application")
Cc: stable@vger.kernel.org # 6.7
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # X13s
Link: https://lore.kernel.org/r/20240406130125.1047436-1-luzmaximilian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For !OF builds, the qcom_scm_qseecom_allowlist is unused:
drivers/firmware/qcom/qcom_scm.c:1652:34: error: ‘qcom_scm_qseecom_allowlist’ defined but not used [-Werror=unused-const-variable=]
Fixes: 00b1248606 ("firmware: qcom_scm: Add support for Qualcomm Secure Execution Environment SCM interface")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311191654.S4wlVUrz-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231120185623.338608-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since the qcom_scm_probe() function returns with an error if
__scm->path contains an error pointer, it is not needed to
verify that again in the qcom_scm_bw_{en,dis}able() functions
so remove the superfluous IS_ERR() checks.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240308-qcom_scm-is_err-check-v1-1-9c3e1ceefafe@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are several functions which are calling qcom_scm_bw_enable()
then returns immediately if the call fails and leaves the clocks
enabled.
Change the code of these functions to disable clocks when the
qcom_scm_bw_enable() call fails. This also fixes a possible dma
buffer leak in the qcom_scm_pas_init_image() function.
Compile tested only due to lack of hardware with interconnect
support.
Cc: stable@vger.kernel.org
Fixes: 65b7ebda50 ("firmware: qcom_scm: Add bw voting support to the SCM interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240304-qcom-scm-disable-clk-v1-1-b36e51577ca1@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We're getting more and more qcom specific .c files in drivers/firmware/
and about to get even more. Create a separate directory for Qualcomm
firmware drivers and move existing sources in there.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Link: https://lore.kernel.org/r/20231017092732.19983-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-10-22 09:14:54 -07:00
Renamed from drivers/firmware/qcom_scm.c (Browse further)
