Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTSzg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylH3QCfbZuG8MiglEZUd4slRLUNqcRQ5tQAn1yKpDFo
l3KLkxo1UTLMXbJBWe+b
=gafK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
In debugging platform or firmware related MEI-PXP connection
issues, having a timeout when clients (such as i915) calling
into mei-pxp's send/receive functions have proven useful as opposed to
blocking forever until the kernel triggers a watchdog panic (when
platform issues are experienced).
Update the mei-pxp component interface send and receive functions
to take in timeouts.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20231011110157.247552-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we can't load the HuC due to an injected failure, we don't want
to throw and error and trip CI. Using the gt_probe_error macro for
logging ensure that the error is only printed if it wasn't explicitly
injected.
v2: keep the line to less than 100 characters (checkpatch).
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7061
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816231320.1555190-1-daniele.ceraolospurio@intel.com
After recent discussions with Mesa folks, it was requested
that we optimize i915's GET_PARAM for the PXP_STATUS without
changing the UAPI spec.
Add these additional optimizations:
- If any PXP initializatoin flow failed, then ensure that
we catch it so that we can change the returned PXP_STATUS
from "2" (i.e. 'PXP is supported but not yet ready')
to "-ENODEV". This typically should not happen and if it
does, we have a platform configuration issue.
- If a PXP arbitration session creation event failed
due to incorrect firmware version or blocking SOC fusing
or blocking BIOS configuration (platform reasons that won't
change if we retry), then reflect that blockage by also
returning -ENODEV in the GET_PARAM:PXP_STATUS.
- GET_PARAM:PXP_STATUS should not wait at all if PXP is
supported but non-i915 dependencies (component-driver /
firmware) we are still pending to complete the init flows.
In this case, just return "2" immediately (i.e. 'PXP is
supported but not yet ready').
Difference from prio revs:
v3: - Rebase with latest tip that has pulled in setting the
gsc fw load to fail if proxy init fails.
v2: - Use a #define for the default readiness timeout (Vivaik).
- Improve comments around the failing of proxy-init.
v1: - Change the commit msg style to be imperative. (Jani)
- Rename timeout to timeout_ms. (Jani)
- Fix is_fw_err_platform_config to use higher order
param (pxp) first. (Jani)
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Balasubrawmanian, Vivaik <vivaik.balasubrawmanian@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802182550.1592926-1-alan.previn.teres.alexis@intel.com
Refactor i915_coherent_map_type to be GT-centric rather than
device-centric. Each GT may require different coherency
handling due to hardware workarounds.
Since the function now takes a GT instead of the i915, the function is
renamed and moved to the gt folder.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801153242.2445478-3-jonathan.cavitt@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20230807121957.598420-3-andi.shyti@linux.intel.com
For MTL, the PXP back-end transport uses the GSC engine to submit
HECI packets through the HW to the GSC firmware for PXP arb
session management. This submission uses a non-priveleged
batch buffer, a buffer for the command packet and of course
a context targeting the GSC-CS.
Thus for MTL, we need to allocate and free a set of execution
submission resources for the management of the arbitration session.
Lets start with the context creation first since that object and
its usage is very straight-forward. We'll add the buffer allocation
and freeing later when we introduce the gsccs' send-message function.
Do this one time allocation of gsccs specific resources in
a new gsccs source file with intel_pxp_gsccs_init / fini functions
and hook them up from the PXP front-end.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230511231738.1077674-2-alan.previn.teres.alexis@intel.com
MESA driver is creating protected context on every driver handle
creation to query caps bits for app. So when running CI tests,
they are observing hundreds of drm_errors when enabling PXP
in .config but using SOC fusing or BIOS configuration that cannot
support PXP sessions.
The fixes tag referenced below was to resolve a related issue
where we wanted to silence error messages, but that case was due
to outdated IFWI (firmware) that definitely needed an upgrade and
was, at that point, considered a one-off case as opposed to today's
realization that default CI was enabling PXP in kernel config for
all testing.
So with this patch, let's strike a balance between issues that is
critical but are root-caused from HW/platform gaps (louder drm-warn
but just ONCE) vs other cases where it could also come from session
state machine (which cannot be a WARN_ONCE since it can be triggered
due to runtime operation events).
Let's use helpers for these so as more functions are added in future
features / HW (or as FW designers continue to bless upstreaming of
the error codes and meanings), we only need to update the helpers.
NOTE: Don't completely remove FW errors (via drm_debug) or else cusomer
apps that really needs to know that content protection failed won't
be aware of it.
v2: - Add fixes tag (Trvtko)
v3: - Break multi-line drm_dbg strings into separate drm_dbg (Daniele)
- Fix couple of typecasting nits (Daniele)
v4: - Unsuccessful PXP FW cmd due to platform configuration shouldn't
use drm_WARN_once (Tvrtko), Switched to use drm_info_once.
v5: - Added "reported-and-tested" by Eero.
Reported-and-tested-by: Eero Tamminen <eero.t.tamminen@intel.com>
Fixes: b762787bf7 ("drm/i915/pxp: Use drm_dbg if arb session failed due to fw version")
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323184156.4140659-1-alan.previn.teres.alexis@intel.com
A gap was recently discovered where if an application did not
invalidate all of the stream keys (intentionally or not), and the
driver did a full PXP global teardown on the GT subsystem, we
find that future session creation would fail on the security
firmware's side of the equation. i915 is the entity that needs
ensure the sessions' state across both iGT and security firmware
are at a known clean point when performing a full global teardown.
Architecturally speaking, i915 should inspect all active sessions
and submit the invalidate-stream-key PXP command to the security
firmware for each of them. However, for the upstream i915 driver
we only support the arbitration session that can be created
so that will be the only session we will cleanup.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Juston Li <justonli@chromium.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-5-alan.previn.teres.alexis@intel.com
Add device link with i915 as consumer and mei_pxp as supplier
to ensure proper ordering of power flows.
V2: condition on absence of heci_pxp to filter out DG
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125082637.118970-3-alan.previn.teres.alexis@intel.com
If PXP arb-session is being attempted on older hardware SKUs or
on hardware with older, unsupported, firmware versions, then don't
report the failure with a drm_error. Instead, look specifically for
the API-version error reply and drm_dbg that reply. In this case, the
user-space will eventually get a -ENODEV for the protected context
creation which is the correct behavior and we don't create unnecessary
drm_error's in our dmesg (for what is unsupported platforms).
Changes from prio revs:
v2 : - remove unnecessary newline. (Jani)
v1 : - print incorrect version from input packet, not output.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221221174901.2703954-1-alan.previn.teres.alexis@intel.com
Starting with MTL, there will be two GT-tiles, a render and media
tile. PXP as a service for supporting workloads with protected
contexts and protected buffers can be subscribed by process
workloads on any tile. However, depending on the platform,
only one of the tiles is used for control events pertaining to PXP
operation (such as creating the arbitration session and session
tear-down).
PXP as a global feature is accessible via batch buffer instructions
on any engine/tile and the coherency across tiles is handled implicitly
by the HW. In fact, for the foreseeable future, we are expecting this
single-control-tile for the PXP subsystem.
In MTL, it's the standalone media tile (not the root tile) because
it contains the VDBOX and KCR engine (among the assets PXP relies on
for those events).
Looking at the current code design, each tile is represented by the
intel_gt structure while the intel_pxp structure currently hangs off the
intel_gt structure.
Keeping the intel_pxp structure within the intel_gt structure makes some
internal functionalities more straight forward but adds code complexity to
code readability and maintainibility to many external-to-pxp subsystems
which may need to pick the correct intel_gt structure. An example of this
would be the intel_pxp_is_active or intel_pxp_is_enabled functionality
which should be viewed as a global level inquiry, not a per-gt inquiry.
That said, this series promotes the intel_pxp structure into the
drm_i915_private structure making it a top-level subsystem and the PXP
subsystem will select the control gt internally and keep a pointer to
it for internal reference.
This promotion comes with two noteworthy changes:
1. Exported pxp functions that are called by external subsystems
(such as intel_pxp_enabled/active) will have to check implicitly
if i915->pxp is valid as that structure will not be allocated
for HW that doesn't support PXP.
2. Since GT is now considered a soft-dependency of PXP we are
ensuring that GT init happens before PXP init and vice versa
for fini. This causes a minor ordering change whereby we previously
called intel_pxp_suspend after intel_uc_suspend but now is before
i915_gem_suspend_late but the change is required for correct
dependency flows. Additionally, this re-order change doesn't
have any impact because at that point in either case, the top level
entry to i915 won't observe any PXP events (since the GPU was
quiesced during suspend_prepare). Also, any PXP event doesn't
really matter when we disable the PXP HW (global GT irqs are
already off anyway, so even if there was a bug that generated
spurious events we wouldn't see it and we would just clean it
up on resume which is okay since the default fallback action
for PXP would be to keep the sessions off at this suspend stage).
Changes from prior revs:
v11: - Reformat a comment (Tvrtko).
v10: - Change the code flow for intel_pxp_init to make it more
cleaner and readible with better comments explaining the
difference between full-PXP-feature vs the partial-teelink
inits depending on the platform. Additionally, only do
the pxp allocation when we are certain the subsystem is
needed. (Tvrtko).
v9: - Cosmetic cleanups in supported/enabled/active. (Daniele).
- Add comments for intel_pxp_init and pxp_get_ctrl_gt that
explain the functional flow for when PXP is not supported
but the backend-assets are needed for HuC authentication
(Daniele and Tvrtko).
- Fix two remaining functions that are accessible outside
PXP that need to be checking pxp ptrs before using them:
intel_pxp_irq_handler and intel_pxp_huc_load_and_auth
(Tvrtko and Daniele).
- User helper macro in pxp-debugfs (Tvrtko).
v8: - Remove pxp_to_gt macro (Daniele).
- Fix a bug in pxp_get_ctrl_gt for the case of MTL and we don't
support GSC-FW on it. (Daniele).
- Leave i915->pxp as NULL if we dont support PXP and in line
with that, do additional validity check on i915->pxp for
intel_pxp_is_supported/enabled/active (Daniele).
- Remove unncessary include header from intel_gt_debugfs.c
and check drm_minor i915->drm.primary (Daniele).
- Other cosmetics / minor issues / more comments on suspend
flow order change (Daniele).
v7: - Drop i915_dev_to_pxp and in intel_pxp_init use 'i915->pxp'
through out instead of local variable newpxp. (Rodrigo)
- In the case intel_pxp_fini is called during driver unload but
after i915 loading failed without pxp being allocated, check
i915->pxp before referencing it. (Alan)
v6: - Remove HAS_PXP macro and replace it with intel_pxp_is_supported
because : [1] introduction of 'ctrl_gt' means we correct this
for MTL's upcoming series now. [2] Also, this has little impact
globally as its only used by PXP-internal callers at the moment.
- Change intel_pxp_init/fini to take in i915 as its input to avoid
ptr-to-ptr in init/fini calls.(Jani).
- Remove the backpointer from pxp->i915 since we can use
pxp->ctrl_gt->i915 if we need it. (Rodrigo).
v5: - Switch from series to single patch (Rodrigo).
- change function name from pxp_get_kcr_owner_gt to
pxp_get_ctrl_gt.
- Fix CI BAT failure by removing redundant call to intel_pxp_fini
from driver-remove.
- NOTE: remaining open still persists on using ptr-to-ptr
and back-ptr.
v4: - Instead of maintaining intel_pxp as an intel_gt structure member
and creating a number of convoluted helpers that takes in i915 as
input and redirects to the correct intel_gt or takes any intel_gt
and internally replaces with the correct intel_gt, promote it to
be a top-level i915 structure.
v3: - Rename gt level helper functions to "intel_pxp_is_enabled/
supported/ active_on_gt" (Daniele)
- Upgrade _gt_supports_pxp to replace what was intel_gtpxp_is
supported as the new intel_pxp_is_supported_on_gt to check for
PXP feature support vs the tee support for huc authentication.
Fix pxp-debugfs-registration to use only the former to decide
support. (Daniele)
- Couple minor optimizations.
v2: - Avoid introduction of new device info or gt variables and use
existing checks / macros to differentiate the correct GT->PXP
control ownership (Daniele Ceraolo Spurio)
- Don't reuse the updated global-checkers for per-GT callers (such
as other files within PXP) to avoid unnecessary GT-reparsing,
expose a replacement helper like the prior ones. (Daniele).
v1: - Add one more patch to the series for the intel_pxp suspend/resume
for similar refactoring
References: https://patchwork.freedesktop.org/patch/msgid/20221202011407.4068371-1-alan.previn.teres.alexis@intel.com
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221208180542.998148-1-alan.previn.teres.alexis@intel.com
Previously, we only used PXP FW interface version-42 structures for
PXP arbitration session on ADL/TGL products and version-43 for HuC
authentication on DG2. That worked fine despite not differentiating such
versioning of the PXP firmware interaction structures. This was okay
back then because the only commands used via version 42 was not
used via version 43 and vice versa.
With MTL, we'll need both these versions side by side for the same
commands (PXP-session) with the older platform feature support. That
said, let's create separate files to define the structures and definitions
for both version-42 and 43 of PXP FW interfaces.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108045628.4187260-2-alan.previn.teres.alexis@intel.com
Driver Changes:
- Fix for #7306: [Arc A380] white flickering when using arc as a
secondary gpu (Matt A)
- Add Wa_18017747507 for DG2 (Wayne)
- Avoid spurious WARN on DG1 due to incorrect cache_dirty flag
(Niranjana, Matt A)
- Corrections to CS timestamp support for Gen5 and earlier (Ville)
- Fix a build error used with clang compiler on hwmon (GG)
- Improvements to LMEM handling with RPM (Anshuman, Matt A)
- Cleanups in dmabuf code (Mike)
- Selftest improvements (Matt A)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2N11wu175p6qeEN@jlahtine-mobl.ger.corp.intel.com
The GSC will perform both the load and the authentication, so we just
need to check the auth bit after the GSC has replied.
Since we require the PXP module to load the HuC, the earliest we can
trigger the load is during the pxp_bind operation.
Note that GSC-loaded HuC survives GT reset, so we need to just mark it
as ready when we re-init the GT HW.
V2: move setting of HuC fw error state to the failure path of the HuC
auth function, so it covers both the legacy and new auth flows
V4:
1. Fix typo in the commit message
2. style fix in intel_huc_wait_for_auth_complete()
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-11-daniele.ceraolospurio@intel.com
Command to be sent via the stream interface are written to a local
memory page, whose address is then provided to the GSC.
The interface supports providing a full sg with multiple pages for both
input and output messages, but since for now we only aim to support short
and synchronous messages we can use a single page for both input and
output.
Note that the mei interface expects an sg of 4k pages, while our lmem pages
are 64k. If we ever need to support more than 4k we'll need to convert.
Added a TODO comment to the code to record this.
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-9-daniele.ceraolospurio@intel.com
The mei_pxp module is required to send the command to load authenticate
the HuC to the GSC even if pxp is not in use for protected content
management.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-8-daniele.ceraolospurio@intel.com
Driver Changes:
- Added bits of DG2 support around page table handling (Stuart Summers, Matthew Auld)
- Fixed wakeref leak in PMU busyness during reset in GuC mode (Umesh Nerlige Ramappa)
- Fixed debugfs access crash if GuC failed to load (John Harrison)
- Bring back GuC error log to error capture, undoing accidental earlier breakage (Thomas Hellström)
- Fixed memory leak in error capture caused by earlier refactoring (Thomas Hellström)
- Exclude reserved stolen from driver use (Chris Wilson)
- Add memory region sanity checking and optional full test (Chris Wilson)
- Fixed buffer size truncation in TTM shmemfs backend (Robert Beckett)
- Use correct lock and don't overwrite internal data structures when stealing GuC context ids (Matthew Brost)
- Don't hog IRQs when destroying GuC contexts (John Harrison)
- Make GuC to Host communication more robust (Matthew Brost)
- Continuation of locking refactoring around VMA and backing store handling (Maarten Lankhorst)
- Improve performance of reading GuC log from debugfs (John Harrison)
- Log when GuC fails to reset an engine (John Harrison)
- Speed up GuC/HuC firmware loading by requesting RP0 (Vinay Belgaumkar)
- Further work on asynchronous VMA unbinding (Thomas Hellström, Christian König)
- Refactor GuC/HuC firmware handling to prepare for future platforms (John Harrison)
- Prepare for future different GuC/HuC firmware signing key sizes (Daniele Ceraolo Spurio, Michal Wajdeczko)
- Add noreclaim annotations (Matthew Auld)
- Remove racey GEM_BUG_ON between GPU reset and GuC communication handling (Matthew Brost)
- Refactor i915->gt with to_gt(i915) to prepare for future platforms (Michał Winiarski, Andi Shyti)
- Increase GuC log size for CONFIG_DEBUG_GEM (John Harrison)
- Fixed engine busyness in selftests when in GuC mode (Umesh Nerlige Ramappa)
- Make engine parking work with PREEMPT_RT (Sebastian Andrzej Siewior)
- Replace X86_FEATURE_PAT with pat_enabled() (Lucas De Marchi)
- Selftest for stealing of guc ids (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YcRvKO5cyPvIxVCi@tursulin-mobl2
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-9-andi.shyti@linux.intel.com
During the power event S3+ sleep/resume, hardware will lose all the
encryption keys for every hardware session, even though the
session state might still be marked as alive after resume. Therefore,
we should consider the session as dead on suspend and invalidate all the
objects. The session will be automatically restarted on the first
protected submission on resume.
v2: runtime suspend also invalidates the keys
v3: fix return codes, simplify rpm ops (Chris), use the new worker func
v4: invalidate the objects on suspend, don't re-create the arb sesson on
resume (delayed to first submission).
v5: move irq changes back to irq patch (Rodrigo)
v6: drop invalidation in runtime suspend (Rodrigo)
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-13-alan.previn.teres.alexis@intel.com
Now that we can handle destruction and re-creation of the arb session,
we can postpone the start of the session to the first submission that
requires it, to avoid keeping it running with no user.
v10: increase timeout when waiting in intel_pxp_start as firmware
session startup is slower right after boot.
v13: increase the same timeout by 50 milisec because previous timeout
was not enough to cover two lower level 100 milisec timeouts
in the session termination + creation steps.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-12-alan.previn.teres.alexis@intel.com
The HW will generate a teardown interrupt when session termination is
required, which requires i915 to submit a terminating batch. Once the HW
is done with the termination it will generate another interrupt, at
which point it is safe to re-create the session.
Since the termination and re-creation flow is something we want to
trigger from the driver as well, use a common work function that can be
called both from the irq handler and from the driver set-up flows, which
has the addded benefit of allowing us to skip any extra locks because
the work itself serializes the operations.
v2: use struct completion instead of bool (Chris)
v3: drop locks, clean up functions and improve comments (Chris),
move to common work function.
v4: improve comments, simplify wait logic (Rodrigo)
v5: unconditionally set interrupts, rename state_attacked var (Rodrigo)
v10: remove inclusion of intel_gt_types.h from intel_pxp.h (Jani)
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-10-alan.previn.teres.alexis@intel.com
Create the arbitrary session, with the fixed session id 0xf, after
system boot, for the case that application allocates the protected
buffer without establishing any protection session. Because the
hardware requires at least one alive session for protected buffer
creation. This arbitrary session will need to be re-created after
teardown or power event because hardware encryption key won't be
valid after such cases.
The session ID is exposed as part of the uapi so it can be used as part
of userspace commands.
v2: use gt->uncore->rpm (Chris)
v3: s/arb_is_in_play/arb_is_valid (Chris), move set-up to the new
init_hw function
v4: move interface defs to separate header, set arb_is valid to false
on fini (Rodrigo)
v5: handle async component binding
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-8-alan.previn.teres.alexis@intel.com
The setting is required by hardware to allow us doing further protection
operation such as sending commands to GPU or TEE. The register needs to
be re-programmed on resume, so for simplicitly we bundle the programming
with the component binding, which is automatically called on resume.
Further HW set-up operations will be added in the same location in
follow-up patches, so get ready for them by using a couple of
init/fini_hw wrappers instead of calling the KCR funcs directly.
v3: move programming to component binding function, rework commit msg
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-7-alan.previn.teres.alexis@intel.com
Implement the funcs to create the TEE channel, so kernel can
send the TEE commands directly to TEE for creating the arbitrary
(default) session.
v2: fix locking, don't pollute dev_priv (Chris)
v3: wait for mei PXP component to be bound.
v4: drop the wait, as the component might be bound after i915 load
completes. We'll instead check when sending a tee message.
v5: fix an issue with mei_pxp module removal
v6: don't use fetch_and_zero in fini (Rodrigo)
Signed-off-by: Huang, Sean Z <sean.z.huang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924191452.1539378-6-alan.previn.teres.alexis@intel.com
