This patch fixes two issues regarding the sampling frequency setting:
-The attribute was set as per device, not per channel. As such, when
setting the sampling frequency, the configuration was always done for
the slot 0, and the correct configuration was applied on the next
channel configuration call by the LRU mechanism.
-The LRU implementation does not take into account external settings of
the slot registers. When setting the sampling frequency directly to a
slot register in write_raw(), there is no guarantee that other channels
were not also using that slot and now incorrectly retain their config
as live.
Set the sampling frequency attribute as separate in the channel templates.
Do not set the sampling directly to the slot register in write_raw(),
just mark the config as not live and let the LRU mechanism handle it.
As the reg variable is no longer used, remove it.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-5-b85f33079e18@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The previous value of the append status bit was not cleared before
setting the new value. This caused the bit to remain set after enabling
buffered mode for multiple channels and not permit further buffered
reads from a single channel after the fact.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-4-b85f33079e18@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Temperature channel is unique per device, index is not needed.
This is breaking userspace: Include fixes tag to be released within the
same rc cycle.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-3-8161cc7f3ad1@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add missing names from the device info struct for 3 models to ensure
consistency with the rest of the models.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-2-8161cc7f3ad1@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD7176-2 does not feature input buffers and marks corespondent register
bits as read only. Enable buffers only on supported models.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-1-8161cc7f3ad1@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This was obviously supposed to be a bitwise negate instead of logical.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/5401c681-c4aa-4fab-8c8c-8f0a379e2687@moroto.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This loop definition automatically releases the fwnode_handle on early
exit such as the error cases seen here. This reducing boilerplate and
the chance of a resource leak being introduced in future.
Cc: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330190849.1321065-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel
applications or higher speed multiplexed applications. The Sigma-Delta
ADC is intended primarily for measurement of signals close to DC but also
delivers outstanding performance with input bandwidths out to ~10kHz.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc> # for gpio-regmap
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240228110622.25114-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
