The commit 01cf893bf0 ("net: intel: i40e/igc: Remove setting Autoneg in
EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate
ethtool_keee structure initialization. When "ethtool --show <device>"
(get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden.
Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE
specification that allows reporting Energy Efficient Ethernet capabilities.
Examples:
Before fix:
ethtool --show-eee enp174s0
EEE settings for enp174s0:
EEE status: not supported
After fix:
EEE settings for enp174s0:
EEE status: disabled
Tx LPI: disabled
Supported EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Fixes: 01cf893bf0 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice_pf_dcb_recfg() re-maps queues to vectors with
ice_vsi_map_rings_to_vectors(), which does not restore the previous
state for XDP queues. This leads to no AF_XDP traffic after rebuild.
Map XDP queues to vectors in ice_vsi_map_rings_to_vectors().
Also, move the code around, so XDP queues are mapped independently only
through .ndo_bpf().
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-5-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in
the rebuild process. The behaviour of the XDP rings config functions is
context-dependent, so the change of order has led to
ice_destroy_xdp_rings() doing additional work and removing XDP prog, when
it was supposed to be preserved.
Also, dependency on the PF state reset flags creates an additional,
fortunately less common problem:
* PFR is requested e.g. by tx_timeout handler
* .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(),
but reset flag is set, so rings are destroyed without deleting the
program
* ice_vsi_rebuild tries to delete non-existent XDP rings, because the
program is still on the VSI
* system crashes
With a similar race, when requested to attach a program,
ice_prepare_xdp_rings() can actually skip setting the program in the VSI
and nevertheless report success.
Instead of reverting to the old order of function calls, add an enum
argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in
order to distinguish between calls from rebuild and .ndo_bpf().
Fixes: efc2214b60 ("ice: Add support for XDP")
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Referenced commit has introduced a bitmap to distinguish between ZC and
copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this
for us.
The bitmap would be especially useful when restoring previous state after
rebuild, if only it was not reallocated in the process. This leads to e.g.
xdpsock dying after changing number of queues.
Instead of preserving the bitmap during the rebuild, remove it completely
and distinguish between ZC and copy-mode queues based on the presence of
a device associated with the pool.
Fixes: e102db780e ("ice: track AF_XDP ZC enabled queues in bitmap")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-3-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice driver reads data from the Shadow RAM portion of the NVM during
initialization, including data used to identify the NVM image and device,
such as the ETRACK ID used to populate devlink dev info fw.bundle.
Currently it is using a fixed offset defined by ICE_CSS_HEADER_LENGTH to
compute the appropriate offset. This worked fine for E810 and E822 devices
which both have CSS header length of 330 words.
Other devices, including both E825-C and E830 devices have different sizes
for their CSS header. The use of a hard coded value results in the driver
reading from the wrong block in the NVM when attempting to access the
Shadow RAM copy. This results in the driver reporting the fw.bundle as 0x0
in both the devlink dev info and ethtool -i output.
The first E830 support was introduced by commit ba20ecb1d1 ("ice: Hook up
4 E830 devices by adding their IDs") and the first E825-C support was
introducted by commit f64e189442 ("ice: introduce new E825C devices
family")
The NVM actually contains the CSS header length embedded in it. Remove the
hard coded value and replace it with logic to read the length from the NVM
directly. This is more resilient against all existing and future hardware,
vs looking up the expected values from a table. It ensures the driver will
read from the appropriate place when determining the ETRACK ID value used
for populating the fw.bundle_id and for reporting in ethtool -i.
The CSS header length for both the active and inactive flash bank is stored
in the ice_bank_info structure to avoid unnecessary duplicate work when
accessing multiple words of the Shadow RAM. Both banks are read in the
unlikely event that the header length is different for the NVM in the
inactive bank, rather than being different only by the overall device
family.
Fixes: ba20ecb1d1 ("ice: Hook up 4 E830 devices by adding their IDs")
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-2-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_get_pfa_module_tlv() function iterates over the Type-Length-Value
structures in the Preserved Fields Area (PFA) of the NVM. This is used by
the driver to access data such as the Part Board Assembly identifier.
The function uses simple logic to iterate over the PFA. First, the pointer
to the PFA in the NVM is read. Then the total length of the PFA is read
from the first word.
A pointer to the first TLV is initialized, and a simple loop iterates over
each TLV. The pointer is moved forward through the NVM until it exceeds the
PFA area.
The logic seems sound, but it is missing a key detail. The Preserved
Fields Area length includes one additional final word. This is documented
in the device data sheet as a dummy word which contains 0xFFFF. All NVMs
have this extra word.
If the driver tries to scan for a TLV that is not in the PFA, it will read
past the size of the PFA. It reads and interprets the last dummy word of
the PFA as a TLV with type 0xFFFF. It then reads the word following the PFA
as a length.
The PFA resides within the Shadow RAM portion of the NVM, which is
relatively small. All of its offsets are within a 16-bit size. The PFA
pointer and TLV pointer are stored by the driver as 16-bit values.
In almost all cases, the word following the PFA will be such that
interpreting it as a length will result in 16-bit arithmetic overflow. Once
overflowed, the new next_tlv value is now below the maximum offset of the
PFA. Thus, the driver will continue to iterate the data as TLVs. In the
worst case, the driver hits on a sequence of reads which loop back to
reading the same offsets in an endless loop.
To fix this, we need to correct the loop iteration check to account for
this extra word at the end of the PFA. This alone is sufficient to resolve
the known cases of this issue in the field. However, it is plausible that
an NVM could be misconfigured or have corrupt data which results in the
same kind of overflow. Protect against this by using check_add_overflow
when calculating both the maximum offset of the TLVs, and when calculating
the next_tlv offset at the end of each loop iteration. This ensures that
the driver will not get stuck in an infinite loop when scanning the PFA.
Fixes: e961b679fb ("ice: add board identifier info to devlink .info_get")
Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-1-e3563aa89b0c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of flow rule creation fail in mlx5_lag_create_port_sel_table(),
instead of previously created rules, the tainted pointer is deleted
deveral times.
Fix this bug by using correct flow rules pointers.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 352899f384 ("net/mlx5: Lag, use buckets in hash mode")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240604100552.25201-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case pci channel becomes offline the driver should not wait for PCI
reads during health dump and recovery flow. The driver has timeout for
each of these loops trying to read PCI, so it would fail anyway.
However, in case of recovery waiting till timeout may cause the pci
error_detected() callback fail to meet pci_dpc_recovered() wait timeout.
Fixes: b3bd076f75 ("net/mlx5: Report devlink health on FW fatal issues")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mainline MTK ethernet driver suffers long time from rarly but
annoying tx queue timeouts. We think that this is caused by fixed
dma sizes hardcoded for all SoCs.
We suspect this problem arises from a low level of free TX DMADs,
the TX Ring alomost full.
The transmit timeout is caused by the Tx queue not waking up. The
Tx queue stops when the free counter is less than ring->thres, and
it will wake up once the free counter is greater than ring->thres.
If the CPU is too late to wake up the Tx queues, it may cause a
transmit timeout.
Therefore, we increased the TX and RX DMADs to improve this error
situation.
Use the dma-size implementation from SDK in a per SoC manner. In
difference to SDK we have no RSS feature yet, so all RX/TX sizes
should be raised from 512 to 2048 byte except fqdma on mt7988 to
avoid the tx timeout issue.
Fixes: 656e705243 ("net-next: mediatek: add support for MT7623 ethernet")
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f58f45c1e5 ("vxlan: drop packets from invalid src-address")
has recently been added to vxlan mainly in the context of source
address snooping/learning so that when it is enabled, an entry in the
FDB is not being created for an invalid address for the corresponding
tunnel endpoint.
Before commit f58f45c1e5 vxlan was similarly behaving as geneve in
that it passed through whichever macs were set in the L2 header. It
turns out that this change in behavior breaks setups, for example,
Cilium with netkit in L3 mode for Pods as well as tunnel mode has been
passing before the change in f58f45c1e5 for both vxlan and geneve.
After mentioned change it is only passing for geneve as in case of
vxlan packets are dropped due to vxlan_set_mac() returning false as
source and destination macs are zero which for E/W traffic via tunnel
is totally fine.
Fix it by only opting into the is_valid_ether_addr() check in
vxlan_set_mac() when in fact source address snooping/learning is
actually enabled in vxlan. This is done by moving the check into
vxlan_snoop(). With this change, the Cilium connectivity test suite
passes again for both tunnel flavors.
Fixes: f58f45c1e5 ("vxlan: drop packets from invalid src-address")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Bauer <mail@david-bauer.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata. This worked in 5.0 kernel but not in newer kernels. The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning. This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.
Fixes: 232ba3a51c ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PF mcam entries has to be at low priority always so that VF
can install longest prefix match rules at higher priority.
This was taken care currently but when priority allocation
wrt reference entry is requested then entries are allocated
from mid-zone instead of low priority zone. Fix this and
always allocate entries from low priority zone for PFs.
Fixes: 7df5b4b260 ("octeontx2-af: Allocate low priority entries for PF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first fixes for v6.10. And we have a big one, I suspect the
biggest wireless pull request we ever had. There are fixes all over,
both in stack and drivers. Likely the most important here are mt76 not
working on mt7615 devices, ath11k not being able to connect to 6 GHz
networks and rtlwifi suffering from packet loss. But of course there's
much more.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmZdrSMRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuYnAgAqZMvSQKbhkYRfIua9Ygmdk8pDetEhaJg
HAUiW8ymLkWG1Md1V3tjY9Es66YeSr03Tx8xz/8pDWSaiUCdCs+u0zonhRK0sb3/
HAfyUpRIGDq/9kTM9lfL+yOTKwtRti+NmTXqeJr1CrpBejuXydRT+YYcIEmwQQxw
pm5xwLmrq74pMRE3VCTRbj2mfv/leFoDQasTeimUi6PgRrCeXSmUDy14k1zyAsI5
/uchvyvhgN54U2vIvO0RzW5zfS84cNEG+mW/+PpiuMftH2sYS1/UqT8BCQdrfzBz
PuiocUBXU68NzB4iLZhzPSDirOsYVaYpgKPfLPF1jNoj+iEQh1HhCA==
=5my7
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10-rc3
The first fixes for v6.10. And we have a big one, I suspect the
biggest wireless pull request we ever had. There are fixes all over,
both in stack and drivers. Likely the most important here are mt76 not
working on mt7615 devices, ath11k not being able to connect to 6 GHz
networks and rtlwifi suffering from packet loss. But of course there's
much more.
* tag 'wireless-2024-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (37 commits)
wifi: rtlwifi: Ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
wifi: mt76: mt7615: add missing chanctx ops
wifi: wilc1000: document SRCU usage instead of SRCU
Revert "wifi: wilc1000: set atomic flag on kmemdup in srcu critical section"
Revert "wifi: wilc1000: convert list management to RCU"
wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan()
wifi: mac80211: correctly parse Spatial Reuse Parameter Set element
wifi: mac80211: fix Spatial Reuse element size check
wifi: iwlwifi: mvm: don't read past the mfuart notifcation
wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkill
wifi: iwlwifi: mvm: check n_ssids before accessing the ssids
wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe option
wifi: iwlwifi: mvm: handle BA session teardown in RF-kill
wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmd
wifi: iwlwifi: mvm: remove stale STA link data during restart
wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdef
wifi: iwlwifi: mvm: set properly mac header
wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64
wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookup
wifi: iwlwifi: mvm: fix a crash on 7265
...
====================
Link: https://lore.kernel.org/r/20240603115129.9494CC2BD10@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the PHY is powered up after powered down most of the registers are
reset, so the PHY setup code needs to be done again. In addition the
interrupt register will need to be setup again so that link status
indication works again.
Fixes: 26dd2974c5 ("net: phy: micrel: Move KSZ9477 errata fixes to PHY driver")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the following snippet is run, lockdep will report a deadlock[1].
/* Acquire all queues dim_locks */
for (i = 0; i < vi->max_queue_pairs; i++)
mutex_lock(&vi->rq[i].dim_lock);
There's no deadlock here because the vq locks are always taken
in the same order, but lockdep can not figure it out. So refactoring
the code to alleviate the problem.
[1]
========================================================
WARNING: possible recursive locking detected
6.9.0-rc7+ #319 Not tainted
--------------------------------------------
ethtool/962 is trying to acquire lock:
but task is already holding lock:
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&vi->rq[i].dim_lock);
lock(&vi->rq[i].dim_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ethtool/962:
#0: ffffffff82dbaab0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x40
#1: ffffffff82dad0a8 (rtnl_mutex){+.+.}-{3:3}, at:
ethnl_default_set_doit+0xbe/0x1e0
stack backtrace:
CPU: 6 PID: 962 Comm: ethtool Not tainted 6.9.0-rc7+ #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xb0
check_deadlock+0x130/0x220
__lock_acquire+0x861/0x990
lock_acquire.part.0+0x72/0x1d0
? lock_acquire+0xf8/0x130
__mutex_lock+0x71/0xd50
virtnet_set_coalesce+0x151/0x190
__ethnl_set_coalesce.isra.0+0x3f8/0x4d0
ethnl_set_coalesce+0x34/0x90
ethnl_default_set_doit+0xdd/0x1e0
genl_family_rcv_msg_doit+0xdc/0x130
genl_family_rcv_msg+0x154/0x230
? __pfx_ethnl_default_set_doit+0x10/0x10
genl_rcv_msg+0x4b/0xa0
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x5a/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x1af/0x280
netlink_sendmsg+0x20e/0x460
__sys_sendto+0x1fe/0x210
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x3a2/0x8a0
? __lock_release+0x5e/0x160
? do_user_addr_fault+0x3a2/0x8a0
? lock_release+0x72/0x140
? do_user_addr_fault+0x3a7/0x8a0
__x64_sys_sendto+0x29/0x30
do_syscall_64+0x78/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 4d4ac2ecec ("virtio_net: Add a lock for per queue RX coalesce")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240528134116.117426-3-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the dim worker is scheduled, if it no longer needs to issue
commands, dim may not be able to return to the working state later.
For example, the following single queue scenario:
1. The dim worker of rxq0 is scheduled, and the dim status is
changed to DIM_APPLY_NEW_PROFILE;
2. dim is disabled or parameters have not been modified;
3. virtnet_rx_dim_work exits directly;
Then, even if net_dim is invoked again, it cannot work because the
state is not restored to DIM_START_MEASURE.
Fixes: 6208799553 ("virtio-net: support rx netdim")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240528134116.117426-2-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactored the handling of control_buf to be within the cvq_lock
critical section, mitigating race conditions between reading device
responses and new command submissions.
Fixes: 6f45ab3e04 ("virtio_net: Add a lock for the command VQ.")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240530034143.19579-1-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 0a44dfc070 ("wifi: mac80211: simplify non-chanctx
drivers") ieee80211_hw_config() is no longer called with changed = ~0.
rtlwifi relied on ~0 in order to ignore the default retry limits of
4/7, preferring 48/48 in station mode and 7/7 in AP/IBSS.
RTL8192DU has a lot of packet loss with the default limits from
mac80211. Fix it by ignoring IEEE80211_CONF_CHANGE_RETRY_LIMITS
completely, because it's the simplest solution.
Link: https://lore.kernel.org/linux-wireless/cedd13d7691f4692b2a2fa5a24d44a22@realtek.com/
Cc: stable@vger.kernel.org # 6.9.x
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/1fabb8e4-adf3-47ae-8462-8aea963bc2a5@gmail.com
Commit f236464f1d ("wifi: wilc1000: convert list management to RCU")
attempted to convert SRCU to RCU usage, assuming it was not really needed.
The runtime issues that arose after merging it showed that there are code
paths involving sleeping functions, and removing those would need some
heavier driver rework.
Add some documentation about SRCU need to make sure that any future
developer do not miss some use cases if tempted to convert back again to
RCU.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-3-bce096e0798c@bootlin.com
This reverts commit 35aee01ff4
Commit 35aee01ff4 ("wifi: wilc1000: set atomic flag on kmemdup in srcu
critical section") was preparatory to the SRCU to RCU conversion done by
commit f236464f1d ("wifi: wilc1000: convert list management to RCU").
This conversion brought issues and so has been reverted, so the atomic flag
is not needed anymore.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-2-bce096e0798c@bootlin.com
This reverts commit f236464f1d
Commit f236464f1d ("wifi: wilc1000: convert list management to RCU")
replaced SRCU with RCU, aiming to simplify RCU usage in the driver. No
documentation or commit history hinted about why SRCU has been preferred
in original design, so it has been assumed to be safe to do this
conversion.
Unfortunately, some static analyzers raised warnings, confirmed by runtime
checker, not long after the merge. At least three different issues arose
when switching to RCU:
- wilc_wlan_txq_filter_dup_tcp_ack is executed in a RCU read critical
section yet calls wait_for_completion_timeout
- wilc_wfi_init_mon_interface calls kmalloc and register_netdevice while
manipulating a vif retrieved from vif list
- set_channel sends command to chip (and so, also waits for a completion)
while holding a vif retrieved from vif list (so, in RCU read critical
section)
Some of those issues are not trivial to fix and would need bigger driver
rework. Fix those issues by reverting the SRCU to RCU conversion commit
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/3b46ec7c-baee-49fd-b760-3bc12fb12eaf@moroto.mountain/
Fixes: f236464f1d ("wifi: wilc1000: convert list management to RCU")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-1-bce096e0798c@bootlin.com
ath.git fixes for 6.10. Two fixes for user reported regressions in
ath11k. One dependency fix and one error path fix.
-----BEGIN PGP SIGNATURE-----
iQFLBAABCgA1FiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmZaAPoXHHF1aWNfa3Zh
bG9AcXVpY2luYy5jb20ACgkQbhckVSbrbZsyFAf/R3y+MhEEMgQRHiBddHrzCWb0
J0z88GoUtQL5R8nYZu7jwyl9OozR8EpdHHmnapvvZ4AXY00CC5yFEJeZkWEEttNk
DY2th3sEy0MlQmHs1C57Y1vAHQnClQpyRtohw6kxl5u8SZlB7TAfd+20aJiYstTA
DsmggxnXXg8ag9mtjweoMGnEoozQ39DRZ+fcMbVQAX322Vom3CIqEwJim27oVhve
2jY6La2T0t2y+xK7vQO7oqYtWYIu4yWvShyhqcMlOfs2It77UtjcnI1aKZXZ+ngK
EBNYPtf0i3Ik/MDd78d5F/jRddZTcw0ITyncfWaTr1xX9UwbpzfZDIt1uutZ6g==
=J1DD
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20240531' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
ath.git fixes for 6.10. Two fixes for user reported regressions in
ath11k. One dependency fix and one error path fix.
The driver overrides the NUMA node id of the device regardless of
whether it knows its correct value (often setting it to -1 even though
the node id is advertised in 'struct device'). This can lead to
suboptimal configurations.
This patch fixes this behavior and makes the shared memory allocation
functions use the NUMA node id advertised by the underlying device.
Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20240528170912.1204417-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On module load, the ice driver checks for the lack of a specific PF
capability to determine if it should reduce the number of devlink params
to register. One situation when this test returns true is when the
driver loads in safe mode. The same check is not present on the unload
path when devlink params are unregistered. This results in the driver
triggering a WARN_ON in the kernel devlink code.
The current check and code path uses a reduction in the number of elements
reported in the list of params. This is fragile and not good for future
maintaining.
Change the parameters to be held in two lists, one always registered and
one dependent on the check.
Add a symmetrical check in the unload path so that the correct parameters
are unregistered as well.
Fixes: 109eb29172 ("ice: Add tx_scheduling_layers devlink param")
CC: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 24407a01e5 ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include the mapping of 200G PHY types
to link speed. As a result the driver is returning UNKNOWN link speed
when setting 200G ethtool advertised link modes.
To fix this add 200G PHY types to link speed mapping to
ice_get_link_speed_based_on_phy_type().
Fixes: 24407a01e5 ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When EEH events occurs, the callback functions in the i40e, which are
managed by the EEH driver, will completely suspend and resume all IO
operations.
- In the PCI error detected callback, replaced i40e_prep_for_reset()
with i40e_io_suspend(). The change is to fully suspend all I/O
operations
- In the PCI error slot reset callback, replaced pci_enable_device_mem()
with pci_enable_device(). This change enables both I/O and memory of
the device.
- In the PCI error resume callback, replaced i40e_handle_reset_warning()
with i40e_io_resume(). This change allows the system to resume I/O
operations
Fixes: a5f3d2c17b ("powerpc/pseries/pci: Add MSI domains")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Robert Thomas <rob.thomas@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-3-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been
introduced. These functions were factored out from the existing
i40e_suspend() and i40e_resume() respectively. This factoring was
done due to concerns about the logic of the I40E_SUSPENSED state, which
caused the device to be unable to recover. The functions are now used
in the EEH handling for device suspend/resume callbacks.
The function i40e_enable_mc_magic_wake() has been moved ahead of
i40e_io_suspend() to ensure it is declared before being used.
Tested-by: Robert Thomas <rob.thomas@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-2-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 861e808602 ("e1000e: move force SMBUS from enable ulp
function to avoid PHY loss issue") introduces a regression on
PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the
ethernet works well after suspend and resume, but after applying the
commit, the ethernet couldn't work anymore after the resume and the
dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally):
[ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx
Without the commit, the force SMBUS code will not be executed if
"return 0" or "goto out" is executed in the enable_ulp(), and in my
case, the "goto out" is executed since FWSM_FW_VALID is set. But after
applying the commit, the force SMBUS code will be ran unconditionally.
Here move the force SMBUS code back to enable_ulp() and put it
immediately ahead of hw->phy.ops.release(hw), this could allow the
longest settling time as possible for interface in this function and
doesn't change the original code logic.
The issue was found on a Lenovo laptop with the ethernet hw as below:
00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a]
(rev 20).
And this patch is verified (cable plug and unplug, system suspend
and resume) on Lenovo laptops with ethernet hw: [8086:550a],
[8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and
[8086:0dc7].
Fixes: 861e808602 ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-1-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver should return RMII interface when XMII is running in RMII mode.
Fixes: 0ab7f6bf16 ("net: dsa: microchip: ksz9477: use common xmii function")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Acked-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case the firmware sends a notification that claims it has more data
than it has, we will read past that was allocated for the notification.
Remove the print of the buffer, we won't see it by default. If needed,
we can see the content with tracing.
This was reported by KFENCE.
Fixes: bdccdb854f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When HW rfkill is toggled to disable the RF, the flow to stop scan is
called. When trying to send the command to abort the scan, since
HW rfkill is toggled, the command is not sent due to rfkill being
asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this
is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow
continues to wait for scan complete notification and fails. Since it
fails, the UID to type mapping is not cleared, and thus a warning is
later fired when trying to stop the interface.
To fix this, modify the UMAC scan abort flow to force sending the
scan abort command even when in rfkill, so stop the FW from accessing
the radio etc.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.8cbe2f8c1a97.Iffe235c12a919dafec88eef399eb1f7bae2c5bdb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In some versions of cfg80211, the ssids poinet might be a valid one even
though n_ssids is 0. Accessing the pointer in this case will cuase an
out-of-bound access. Fix this by checking n_ssids first.
Fixes: c1a7515393 ("iwlwifi: mvm: add adaptive dwell support")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240513132416.6e4d1762bf0d.I5a0e6cc8f02050a766db704d15594c61fe583d45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ensure that the 6 GHz channel is configured with a valid direct BSSID,
avoiding any invalid or multicast BSSID addresses.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69cf65a2f1204d4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When entering RF-kill, mac80211 tears down BA sessions, but
due to RF-kill the commands aren't sent to the device. As a
result, there can be frames pending on the reorder buffer or
perhaps even received while doing so, leading to warnings.
Avoid the warnings by doing the BA session teardown normally
even in RF-kill, which also requires queue sync.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.0762cd80fb3d.I43c5877f3b546159b2db4f36d6d956b333c41cf0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The BIGTK cipher field was added to the kek_kck_material_cmd
but wasn't assigned. Fix that by differentiating between the
IGTK/BIGTK keys and assign the ciphers fields accordingly.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e1b2e78e682c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If pre-recovery mac80211 tried to disable a link but this disablement
failed, then there might be a mismatch between mac80211 assuming the
link has been disabled and the driver still having the data around.
During recover itself, that is not a problem, but should the link be
activated again at a later point, iwlwifi will refuse the activation as
it detects the inconsistent state.
Solve this corner-case by iterating the station in the restart cleanup
handler.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The driver should call iwl_dbg_tlv_free even if debugfs is not defined
since ini mode does not depend on debugfs ifdef.
Fixes: 68f6f492c4 ("iwlwifi: trans: support loading ini TLVs from external file")
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the driver we only use skb_put* for adding data to the skb, hence data
never moves and skb_reset_mac_haeder would set mac_header to the first
time data was added and not to mac80211 header, fix this my using the
actual len of bytes added for setting the mac header.
Fixes: 3f7a9d577d ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer")
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We don't actually support >64 even for HE devices, so revert
back to 64. This fixes an issue where the session is refused
because the queue is configured differently from the actual
session later.
Fixes: 514c30696f ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Liad Kaufman <liad.kaufman@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After moving from commands to notificaitons in the d3 resume flow,
removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes
the return of the default value when looking up their version.
Returning zero here results in the driver sending the not supported
NON_QOS_TX_COUNTER_CMD.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since IWL_FW_CMD_VER_UNKNOWN = 99, then my change to consider
cmd_ver >= 7 instead of cmd_ver = 7 included also firmwares that don't
advertise the command version at all. This made us send a command with a
bad size and because of that, the firmware hit a BAD_COMMAND immediately
after handling the REDUCE_TX_POWER_CMD command.
Fixes: 8f892e225f ("wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.eb20ff5050d3.Ie4fc6f5496cd296fd6ff20d15e98676f28a3cccd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In beacon template version 14, make sure to always set
the TWT IE offset before sending the beacon template command,
also in the debugfs inject_beacon_ie path.
If the TWT IE does not exist, the offset will be set to zero.
Fixes: bf0212fd8f ("wifi: iwlwifi: mvm: add beacon template version 14")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.eb27175c345a.If30ef24aba10fe47fd42a7a9703eb8903035e294@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif
but we removed only from the pre-MLD version of the add_interface
callback. Remove it also from the MLD version.
Fixes: 0bcc215598 ("wifi: iwlwifi: mvm: init vif works only once")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The start counter for FT1 filter is wrongly set to 0 in the driver.
FT1 is used for source address violation (SAV) check and source address
starts at Byte 6 not Byte 0. Fix this by changing start counter to
ETH_ALEN in icssg_ft1_set_mac_addr().
Fixes: e9b4ece7d7 ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240527063015.263748-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.
It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.
This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.
The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.
The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.
Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.
Fixes: a1ffafb0b4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
