Currently the so-called GRO fast path is only enabled for
napi_frags_skb() callers.
After the prior patch, we no longer have to clear frag0 whenever
we pulled bytes to skb->head.
We therefore can initialize frag0 to skb->data so that GRO
fast path can be used in the following additional cases:
- Drivers using header split (populating skb->data with headers,
and having payload in one or more page fragments).
- Drivers not using any page frag (entire packet is in skb->data)
Add a likely() in skb_gro_may_pull() to help the compiler
to generate better code if possible.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Change skb_gro_network_header() to accept a const sk_buff
and to no longer check if frag0 is NULL or not.
This allows to remove skb_gro_frag0_invalidate()
which is seen in profiles when header-split is enabled.
sk_buff parameter is constified for skb_gro_header_fast(),
inet_gro_compute_pseudo() and ip6_gro_compute_pseudo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
skb_gro_header_hard() is renamed to skb_gro_may_pull() to match
the convention used by common helpers like pskb_may_pull().
This means the condition is inverted:
if (skb_gro_header_hard(skb, hlen))
slow_path();
becomes:
if (!skb_gro_may_pull(skb, hlen))
slow_path();
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When doing CSA in multi-link, there really isn't a need to
stop transmissions entirely. Add a feature flag for drivers
to indicate they can handle quiet in CSA (be it by parsing
themselves, or by implementing drv_pre_channel_switch()),
to make that possible.
Also clean up the csa_block_tx handling: it clearly cannot
handle multi-link due to the way queues are stopped, move
it to the sdata. Drivers should be doing it themselves for
working properly during CSA in MLO anyway. Also rename it
to indicate that it reflects TX was blocked at mac80211.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095719.258439191541.I2469d206e2bf5cb244cfde2b4bbc2ae6d1cd3dd9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pass the link conf to the abort_channel_switch driver
method so the driver can handle things correctly.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095718.27f621106ddd.Iadd3d69b722ffe5934779a32a0e4e596a4e33ed4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For CSA to work correctly in multi-link scenarios, pass
the link_id to the relevant callbacks.
While at it, unify/deduplicate the tracing for them.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://msgid.link/20240228095718.b7726635c054.I0be5d00af4acb48cfbd23a9dbf067f9aeb66469d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we just want to determine the length of the fragmented
data, we basically need the same logic, and really we want
it to be _literally_ the same logic, so it cannot be out
of sync in any way.
Allow calling cfg80211_defragment_element() without an output
buffer, where it then just returns the required output size.
Also add this to the tests, just to exercise it, using the
pre-calculated length to really do the defragmentation, which
checks that this is sufficient.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://msgid.link/20240228095718.6d6565b9e3f2.Ib441903f4b8644ba04b1c766f90580ee6f54fc66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We sometimes need to check if a link is active, and this
is complicated by the fact that active_links has no bits
set when the vif isn't (acting as) an MLD. Add a small
new helper ieee80211_vif_link_active() to make that a bit
easier, and use it in a few places.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094901.688760aff5f7.I06892a503f5ecb9563fbd678d35d08daf7a044b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO, we need the link id in the GTK key to be given by
the driver after rekeying in wowlan, so add that.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094500.ce1bfc83a680.I43a6f8ab2804ee07116a37d5b9ec601b843464b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is now possible to disable BQL, but that causes the cpsw driver to break:
drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue'
297 | dql_avail(&netif_txq->dql),
There is already a helper function in net/sch_generic.h that could
be used to help here. Move its implementation into the common
linux/netdevice.h along with the other bql interfaces and change
both users over to the new interface.
Fixes: ea7f3cfaa5 ("net: bql: allow the config to be disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
idev->cnf.ignore_routes_with_linkdown can be used without any locks,
add appropriate annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
idev->cnf.forwarding and net->ipv6.devconf_all->forwarding
might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
idev->cnf.mtu6 might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a multicast group to the ioam6 generic netlink family and provide
ioam6_event() to send an ioam6 event to the multicast group.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update three callers including both ipv4 and ipv6 and let the dropreason
mechanism work in reality.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this patch, I equipped this function with more dropreasons, but
it still doesn't work yet, which I will do later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Soon later patches can use these relatively more accurate
reasons to recognise and find out the cause.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding one drop reason to detect the condition of skb dropped
because of hook points in cookie check and extending NO_SOCKET
to consider another two cases can be used later.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds /proc/sys/net/core/mem_pcpu_rsv sysctl file,
to make SK_MEMORY_PCPU_RESERV tunable.
Commit 3cd3399dd7 ("net: implement per-cpu reserves for
memory_allocated") introduced per-cpu forward alloc cache:
"Implement a per-cpu cache of +1/-1 MB, to reduce number
of changes to sk->sk_prot->memory_allocated, which
would otherwise be cause of false sharing."
sk_prot->memory_allocated points to global atomic variable:
atomic_long_t tcp_memory_allocated ____cacheline_aligned_in_smp;
If increasing the per-cpu cache size from 1MB to e.g. 16MB,
changes to sk->sk_prot->memory_allocated can be further reduced.
Performance may be improved on system with many cores.
Signed-off-by: Adam Li <adamli@os.amperecomputing.com>
Reviewed-by: Christoph Lameter (Ampere) <cl@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct ifacaddr6 are already freed after RCU grace period.
Add __rcu qualifier to aca_next pointer, and idev->ac_list
Add relevant rcu_assign_pointer() and dereference accessors.
ipv6_chk_acast_dev() no longer needs to acquire idev->lock.
/proc/net/anycast6 is now purely RCU protected, it no
longer acquires idev->lock.
Similarly in6_dump_addrs() can use RCU protection to iterate
through anycast addresses. It was relying on a mixture of RCU
and RTNL but next patches will get rid of RTNL there.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223201054.220534-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nexthop_mpath_fill_node() will be potentially called
from contexts holding rcu_lock instead of RTNL.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/all/ZdZDWVdjMaQkXBgW@shredder/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new field into struct fib_dump_filter, to let callers
tell if they use RTNL locking or RCU.
This is used in the following patch, when inet_dump_fib()
no longer holds RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to RTNL_FLAG_DOIT_UNLOCKED, this new flag
allows dump operations registered via rtnl_register()
or rtnl_register_module() to opt-out from RTNL protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the local variable in GENL_REQ_ATTR_CHECK() const.
genl_info_dump() returns a const pointer, so the macro
is currently hard to use in genl dumps.
Link: https://lore.kernel.org/r/20240222222819.156320-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, mctp_local_output only takes ownership of skb on success, and
we may leak an skb if mctp_local_output fails in specific states; the
skb ownership isn't transferred until the actual output routing occurs.
Instead, make mctp_local_output free the skb on all error paths up to
the route action, so it always consumes the passed skb.
Fixes: 833ef3b91d ("mctp: Populate socket implementation")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220081053.1439104-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GYgG
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-02-21' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
1. Prefer KMEM_CACHE() macro to create kmem caches, from Kunwu Chan.
Patches 2 and 3 consolidate nf_log NULL checks and introduces
extra boundary checks on family and type to make it clear that no out
of bounds access will happen. No in-tree user currently passes such
values, but thats not clear from looking at the function.
From Pablo Neira Ayuso.
Patch 4, also from Pablo, gets rid of unneeded conditional in
nft_osf init function.
Patch 5, from myself, fixes erroneous Kconfig dependencies that
came in an earlier net-next pull request. This should get rid
of the xtables related build failure reports.
Patches 6 to 10 are an update to nftables' concatenated-ranges
set type to speed up element insertions. This series also
compacts a few data structures and cleans up a few oddities such
as reliance on ZERO_SIZE_PTR when asking to allocate a set with
no elements. From myself.
Patches 11 moves the nf_reinject function from the netfilter core
(vmlinux) into the nfnetlink_queue backend, the only location where
this is called from. Also from myself.
Patch 12, from Kees Cook, switches xtables' compat layer to use
unsafe_memcpy because xt_entry_target cannot easily get converted
to a real flexible array (its UAPI and used inside other structs).
* tag 'nf-next-24-02-21' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: x_tables: Use unsafe_memcpy() for 0-sized destination
netfilter: move nf_reinject into nfnetlink_queue modules
netfilter: nft_set_pipapo: use GFP_KERNEL for insertions
netfilter: nft_set_pipapo: speed up bulk element insertions
netfilter: nft_set_pipapo: shrink data structures
netfilter: nft_set_pipapo: do not rely on ZERO_SIZE_PTR
netfilter: nft_set_pipapo: constify lookup fn args where possible
netfilter: xtables: fix up kconfig dependencies
netfilter: nft_osf: simplify init path
netfilter: nf_log: validate nf_logger_find_get()
netfilter: nf_log: consolidate check for NULL logger in lookup function
netfilter: expect: Simplify the allocation of slab caches in nf_conntrack_expect_init
====================
Link: https://lore.kernel.org/r/20240221112637.5396-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The third "new features" pull request for v6.9. This is a quick
followup to send commit 04edb5dc68 ("wifi: ath12k: Fix uninitialized
use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
introduced in the previous pull request.
We also have support for QCA2066 in ath11k, several new features in
ath12k and few other changes in drivers. In stack it's mostly cleanup
and refactoring.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
iwlwifi
* mvm: support wider-bandwidth OFDMA
* bump firmware API to 90 for BZ/SC devices
brcmfmac
* DMI nvram filename quirk for ACEPC W5 Pro
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXXJpARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu2Twf/QZ5FVecvOu/qNQyUeaclXjNuFw0+cJpz
luVzxG54wh484L1dRAmsztwHPA78rLMcExZi2Zb9PszVv4V9mD6rHoV0ws/o86Gr
QTq+8To9sr9wJfooVRO1ifgfoiafxX2TYJ9yGR3XwkCDf5ROq9JLBOQWW8p0bO/M
UyWoMvSf/WBAjOHUfCQzPCVPQhyld7JL/V7LGMZGmdy3cPkWPVXmRMyHL9f3+vdq
O5/HxZBP4Dg3zEsUiOADmD/l+8wuf/Tebqt7uRJ4/sAHsmlEPzoZPsuNxy6FljYX
5fuZVpzmjGzdGV+YHidpbZl/9Shq/Bc7Cf7eTQZ70P9cL1kbZ7usIA==
=mcyY
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The third "new features" pull request for v6.9. This is a quick
followup to send commit 04edb5dc68 ("wifi: ath12k: Fix uninitialized
use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
introduced in the previous pull request.
We also have support for QCA2066 in ath11k, several new features in
ath12k and few other changes in drivers. In stack it's mostly cleanup
and refactoring.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
iwlwifi
* mvm: support wider-bandwidth OFDMA
* bump firmware API to 90 for BZ/SC devices
brcmfmac
* DMI nvram filename quirk for ACEPC W5 Pro
* tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (75 commits)
wifi: wilc1000: revert reset line logic flip
wifi: brcmfmac: Add DMI nvram filename quirk for ACEPC W5 Pro
wifi: rtlwifi: set initial values for unexpected cases of USB endpoint priority
wifi: rtl8xxxu: check vif before using in rtl8xxxu_tx()
wifi: rtlwifi: rtl8192cu: Fix TX aggregation
wifi: wilc1000: remove AKM suite be32 conversion for external auth request
wifi: nl80211: refactor parsing CSA offsets
wifi: nl80211: force WLAN_AKM_SUITE_SAE in big endian in NL80211_CMD_EXTERNAL_AUTH
wifi: iwlwifi: load b0 version of ucode for HR1/HR2
wifi: iwlwifi: handle per-phy statistics from fw
wifi: iwlwifi: iwl-fh.h: fix kernel-doc issues
wifi: iwlwifi: api: fix kernel-doc reference
wifi: iwlwifi: mvm: unlock mvm if there is no primary link
wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
wifi: iwlwifi: mvm: support PHY context version 6
wifi: iwlwifi: mvm: partially support PHY context version 6
wifi: iwlwifi: mvm: support wider-bandwidth OFDMA
wifi: cfg80211: use ML element parsing helpers
wifi: mac80211: align ieee80211_mle_get_bss_param_ch_cnt()
wifi: cfg80211: refactor RNR parsing
...
====================
Link: https://lore.kernel.org/r/20240222105205.CEC54C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, we lookup sk_keys from the entire struct net_namespace, which
may contain multiple MCTP net IDs. In those cases we want to distinguish
between endpoints with the same EID but different net ID.
Add the net ID data to the struct mctp_sk_key, populate on add and
filter on this during route lookup.
For the ioctl interface, we use a default net of
MCTP_INITIAL_DEFAULT_NET (ie., what will be in use for single-net
configurations), but we'll extend the ioctl interface to provide
net-specific tag allocation in an upcoming change.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have a double-swap of local and peer addresses in
mctp_alloc_local_tag; the arguments in both call sites are swapped, but
there is also a swap in the implementation of alloc_local_tag. This is
opaque because we're using source/dest address references, which don't
match the local/peer semantics.
Avoid this confusion by naming the arguments as 'local' and 'peer', and
remove the double swap. The calling order now matches mctp_key_alloc.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
dst is transferred to the flow object, route object does not own it
anymore. Reset dst in route object, otherwise if flow_offload_add()
fails, error path releases dst twice, leading to a refcount underflow.
Fixes: a3c90f7a23 ("netfilter: nf_tables: flow offload expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Make cfg80211_inform_bss_frame_data() call the existing
cfg80211_inform_bss_data() after parsing the frame in the
appropriate way, so we have less code duplication. This
required introducing a new CFG80211_BSS_FTYPE_S1G_BEACON,
but that can be used by other drivers as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.874aed1eff5f.Ib7d88d126eec50c64763251a78cb432bb5df14df@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, function to check if beacon countdown is complete uses deflink
to fetch the beacon and check the counter. However, with MLO, there is
a need to check the counter for the beacon in a particular link.
Add support to use link_id in order to fetch the beacon from a particular
link data.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The second "new features" pull request for v6.9. Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.
We also twice merged wireless into wireless-next to avoid conflicts
between the trees.
Major changes:
stack
* mac80211: negotiated TTLM request support
* SPP A-MSDU support
* mac80211: wider bandwidth OFDMA config support
iwlwifi
* kunit tests
* bump FW API to 89 for AX/BZ/SC devices
* enable SPP A-MSDUs
* support for new devices
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
rtl8xxxu
* TP-Link TL-WN823N V2 support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXU2PgRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuzZAf+NsvOkkhIoMG3rYmqli9ELEgupBIEoTwo
2favVGBbLOPIlvUJab3ZZ8Bsntpk3deRmISN27whNm5B3+36c7DKn3aYauVwUNs2
Qb99f3HXkGZQJ8DdKLZMviXXMgKfXzpVISwzD7HdV/GhkVX4LZ/MFzv1zrvLAC/J
LN5K6xKUqbgRJ1kAWbEoJpRCzNtKwx9GHAsO1vhL69yjBAqKkHivV9LE+BNjoXEz
g/LD0z05JqWDyxJ7yud3+DiBlZtvpmK9oa9gpWnuF8sdvkywyBdP/ipfDDLgbCzY
vKF1IUy5GNJSt5+AQS+zO0a8HrwzHR+XG8w5sCEKpjh3Nj0cxtFJ5w==
=Bnyy
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The second "new features" pull request for v6.9. Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.
We also twice merged wireless into wireless-next to avoid conflicts
between the trees.
Major changes:
stack
* mac80211: negotiated TTLM request support
* SPP A-MSDU support
* mac80211: wider bandwidth OFDMA config support
iwlwifi
* kunit tests
* bump FW API to 89 for AX/BZ/SC devices
* enable SPP A-MSDUs
* support for new devices
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
rtl8xxxu
* TP-Link TL-WN823N V2 support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
No need to keep this in the core, move it to the nfnetlink_queue module.
nf_reroute is moved too, there were no other callers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Add the netmem_ref type, an abstraction for network memory.
To add support for new memory types to the net stack, we must first
abstract the current memory type. Currently parts of the net stack
use struct page directly:
- page_pool
- drivers
- skb_frag_t
Originally the plan was to reuse struct page* for the new memory types,
and to set the LSB on the page* to indicate it's not really a page.
However, for compiler type checking we need to introduce a new type.
netmem_ref is introduced to abstract the underlying memory type.
Currently it's a no-op abstraction that is always a struct page
underneath. In parallel there is an undergoing effort to add support
for devmem to the net stack:
https://lore.kernel.org/netdev/20231208005250.2910004-1-almasrymina@google.com/
netmem_ref can be pointers to different underlying memory types, and the
low bits are set to indicate the memory type. Helpers are provided
to convert netmem pointers to the underlying memory type (currently only
struct page). In the devmem series helpers are provided so that calling
code can use netmem without worrying about the underlying memory type
unless absolutely necessary.
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use global percpu page_pool_recycle_stats counter for system page_pool
allocator instead of allocating a separate percpu variable for each
(also percpu) page pool instance.
Reviewed-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/87f572425e98faea3da45f76c3c68815c01a20ee.1708075412.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that direct recycling is performed basing on pool->cpuid when set,
memory leaks are possible:
1. A pool is destroyed.
2. Alloc cache is emptied (it's done only once).
3. pool->cpuid is still set.
4. napi_pp_put_page() does direct recycling basing on pool->cpuid.
5. Now alloc cache is not empty, but it won't ever be freed.
In order to avoid that, rewrite pool->cpuid to -1 when unlinking NAPI to
make sure no direct recycling will be possible after emptying the cache.
This involves a bit of overhead as pool->cpuid now must be accessed
via READ_ONCE() to avoid partial reads.
Rename page_pool_unlink_napi() -> page_pool_disable_direct_recycling()
to reflect what it actually does and unexport it.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240215113905.96817-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the introduction of the subflow ULP diag interface, the
dump callback accessed all the subflow data with lockless.
We need either to annotate all the read and write operation accordingly,
or acquire the subflow socket lock. Let's do latter, even if slower, to
avoid a diffstat havoc.
Fixes: 5147dfb508 ("mptcp: allow dumping subflow context to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this change, generation of the list of MDB events to replay
would race against the creation of new group memberships, either from
the IGMP/MLD snooping logic or from user configuration.
While new memberships are immediately visible to walkers of
br->mdb_list, the notification of their existence to switchdev event
subscribers is deferred until a later point in time. So if a replay
list was generated during a time that overlapped with such a window,
it would also contain a replay of the not-yet-delivered event.
The driver would thus receive two copies of what the bridge internally
considered to be one single event. On destruction of the bridge, only
a single membership deletion event was therefore sent. As a
consequence of this, drivers which reference count memberships (at
least DSA), would be left with orphan groups in their hardware
database when the bridge was destroyed.
This is only an issue when replaying additions. While deletion events
may still be pending on the deferred queue, they will already have
been removed from br->mdb_list, so no duplicates can be generated in
that scenario.
To a user this meant that old group memberships, from a bridge in
which a port was previously attached, could be reanimated (in
hardware) when the port joined a new bridge, without the new bridge's
knowledge.
For example, on an mv88e6xxx system, create a snooping bridge and
immediately add a port to it:
root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \
> ip link set dev x3 up master br0
And then destroy the bridge:
root@infix-06-0b-00:~$ ip link del dev br0
root@infix-06-0b-00:~$ mvls atu
ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a
DEV:0 Marvell 88E6393X
33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . .
33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . .
ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a
root@infix-06-0b-00:~$
The two IPv6 groups remain in the hardware database because the
port (x3) is notified of the host's membership twice: once via the
original event and once via a replay. Since only a single delete
notification is sent, the count remains at 1 when the bridge is
destroyed.
Then add the same port (or another port belonging to the same hardware
domain) to a new bridge, this time with snooping disabled:
root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \
> ip link set dev x3 up master br1
All multicast, including the two IPv6 groups from br0, should now be
flooded, according to the policy of br1. But instead the old
memberships are still active in the hardware database, causing the
switch to only forward traffic to those groups towards the CPU (port
0).
Eliminate the race in two steps:
1. Grab the write-side lock of the MDB while generating the replay
list.
This prevents new memberships from showing up while we are generating
the replay list. But it leaves the scenario in which a deferred event
was already generated, but not delivered, before we grabbed the
lock. Therefore:
2. Make sure that no deferred version of a replay event is already
enqueued to the switchdev deferred queue, before adding it to the
replay list, when replaying additions.
Fixes: 4f2673b3a2 ("net: bridge: add helper to replay port and host-joined mdb entries")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add genetlink family bind()/unbind() callbacks when adding/removing
multicast group to/from netlink client socket via setsockopt() or
bind() syscall.
They can be used to track if consumers of netlink multicast messages
emerge or disappear. Thus, a client implementing callbacks, can now
send events only when there are active consumers, preventing unnecessary
work when none exist.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240212161615.161935-2-stanislaw.gruszka@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In RFC 8981, REGEN_ADVANCE cannot be less than 2 seconds, and the RFC
does not permit the creation of temporary addresses with lifetimes
shorter than that:
> When processing a Router Advertisement with a
> Prefix Information option carrying a prefix for the purposes of
> address autoconfiguration (i.e., the A bit is set), the host MUST
> perform the following steps:
> 5. A temporary address is created only if this calculated preferred
> lifetime is greater than REGEN_ADVANCE time units.
However, some users want to change their IPv6 address as frequently as
possible regardless of the RFC's arbitrary minimum lifetime. For the
benefit of those users, add a regen_min_advance sysctl parameter that
can be set to below or above 2 seconds.
Link: https://datatracker.ietf.org/doc/html/rfc8981
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Even if that's the same as IEEE80211_MAX_SSID_LEN, we really
should just use IEEE80211_MAX_MESH_ID_LEN for mesh, rather
than having the BUILD_BUG_ON()s.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
