reweight_eevdf() only keeps V unchanged inside itself. When se !=
cfs_rq->curr, it would be dequeued from rb tree first. So that V is
changed and the result is wrong. Pass the original V to reweight_eevdf()
to fix this issue.
Fixes: eab03c23c2 ("sched/eevdf: Fix vruntime adjustment on reweight")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
[peterz: flip if() condition for clarity]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Abel Wu <wuyun.abel@bytedance.com>
Link: https://lkml.kernel.org/r/20240306022133.81008-3-dtcccc@linux.alibaba.com
reweight_eevdf() needs the latest V to do accurate calculation for new
ve and vd. So update V unconditionally when se is runnable.
Fixes: eab03c23c2 ("sched/eevdf: Fix vruntime adjustment on reweight")
Suggested-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Abel Wu <wuyun.abel@bytedance.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20240306022133.81008-2-dtcccc@linux.alibaba.com
To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the
sysctl core.
One of these is the ctl_table_arg member of struct ctl_table_header.
Constify this reference as a prerequisite for the full constification of
struct ctl_table instances.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=YLBT
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Add a missing memory barrier in the concurrency ID mm switching
* tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Add missing memory barrier in switch_mm_cid
No need to continue the for_each_subsys loop after the token matches the
name of subsys and cgroup_no_v1_mask is set.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently cgroup1_pidlist_destroy_all() will be called when releasing
cgroup even if the cgroup is on default hierarchy, however it doesn't
make any sense for v2 to destroy pidlist of v1.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Support new prctl with key PR_RISCV_SET_ICACHE_FLUSH_CTX to enable
optimization of cross modifying code. This prctl enables userspace code
to use icache flushing instructions such as fence.i with the guarantee
that the icache will continue to be clean after thread migration.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-2-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The freezer->lock was replaced by freezer_mutex in commit e5ced8ebb1
("cgroup_freezer: replace freezer->lock with freezer_mutex"), so the
comment here is out-of-date, update it.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Recent change to cgroup_rstat_flush_release added a
parameter cgrp, which is used by tracepoint to correlate
with other tracepoints that also have this cgrp.
The kernel test robot detected kernel doc was missing
a description of this member.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404170821.HwZGISTY-lkp@intel.com/
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The generic vtime_task_switch() implementation gets built only
if __ARCH_HAS_VTIME_TASK_SWITCH is not defined, but requires an
architecture to implement arch_vtime_task_switch() callback at
the same time, which is confusing.
Further, arch_vtime_task_switch() is implemented for 32-bit PowerPC
architecture only and vtime_task_switch() generic variant is rather
superfluous.
Simplify the whole vtime_task_switch() wiring by moving the existing
generic implementation to PowerPC.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2cb6e3caada93623f6d4f78ad938ac6cd0e2fda8.1712760275.git.agordeev@linux.ibm.com
Thorvald reported a WARNING [1]. And the root cause is below race:
CPU 1 CPU 2
fork hugetlbfs_fallocate
dup_mmap hugetlbfs_punch_hole
i_mmap_lock_write(mapping);
vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree.
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem!
i_mmap_lock_write(mapping);
hugetlb_vmdelete_list
vma_interval_tree_foreach
hugetlb_vma_trylock_write -- Vma_lock is cleared.
tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem!
hugetlb_vma_unlock_write -- Vma_lock is assigned!!!
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside
i_mmap_rwsem lock while vma lock can be used in the same time. Fix this
by deferring linking file vma until vma is fully initialized. Those vmas
should be initialized first before they can be used.
Link: https://lkml.kernel.org/r/20240410091441.3539905-1-linmiaohe@huawei.com
Fixes: 8d9bfb2608 ("hugetlb: add vma based lock for pmd sharing")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reported-by: Thorvald Natvig <thorvald@google.com>
Closes: https://lore.kernel.org/linux-mm/20240129161735.6gmjsswx62o4pbja@revolver/T/ [1]
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Tycho Andersen <tandersen@netflix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit enhances the ability to troubleshoot the global
cgroup_rstat_lock by introducing wrapper helper functions for the lock
along with associated tracepoints.
Although global, the cgroup_rstat_lock helper APIs and tracepoints take
arguments such as cgroup pointer and cpu_in_loop variable. This
adjustment is made because flushing occurs per cgroup despite the lock
being global. Hence, when troubleshooting, it's important to identify the
relevant cgroup. The cpu_in_loop variable is necessary because the global
lock may be released within the main flushing loop that traverses CPUs.
In the tracepoints, the cpu_in_loop value is set to -1 when acquiring the
main lock; otherwise, it denotes the CPU number processed last.
The new feature in this patchset is detecting when lock is contended. The
tracepoints are implemented with production in mind. For minimum overhead
attach to cgroup:cgroup_rstat_lock_contended, which only gets activated
when trylock detects lock is contended. A quick production check for
issues could be done via this perf commands:
perf record -g -e cgroup:cgroup_rstat_lock_contended
Next natural question would be asking how long time do lock contenders
wait for obtaining the lock. This can be answered by measuring the time
between cgroup:cgroup_rstat_lock_contended and cgroup:cgroup_rstat_locked
when args->contended is set. Like this bpftrace script:
bpftrace -e '
tracepoint:cgroup:cgroup_rstat_lock_contended {@start[tid]=nsecs}
tracepoint:cgroup:cgroup_rstat_locked {
if (args->contended) {
@wait_ns=hist(nsecs-@start[tid]); delete(@start[tid]);}}
interval:s:1 {time("%H:%M:%S "); print(@wait_ns); }'
Extending with time spend holding the lock will be more expensive as this
also looks at all the non-contended cases.
Like this bpftrace script:
bpftrace -e '
tracepoint:cgroup:cgroup_rstat_lock_contended {@start[tid]=nsecs}
tracepoint:cgroup:cgroup_rstat_locked { @locked[tid]=nsecs;
if (args->contended) {
@wait_ns=hist(nsecs-@start[tid]); delete(@start[tid]);}}
tracepoint:cgroup:cgroup_rstat_unlock {
@locked_ns=hist(nsecs-@locked[tid]); delete(@locked[tid]);}
interval:s:1 {time("%H:%M:%S "); print(@wait_ns);print(@locked_ns); }'
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Atomic counters are in kzalloc'd struct. They are zeroed already and
atomic64_t does not need special initialization
(cf kernel/trace/trace_clock.c:trace_counter).
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch addresses a latent unsoundness issue in the
scalar(32)_min_max_and/or/xor functions. While it is not a bugfix,
it ensures that the functions produce sound outputs for all inputs.
The issue occurs in these functions when setting signed bounds. The
following example illustrates the issue for scalar_min_max_and(),
but it applies to the other functions.
In scalar_min_max_and() the following clause is executed when ANDing
positive numbers:
/* ANDing two positives gives a positive, so safe to
* cast result into s64.
*/
dst_reg->smin_value = dst_reg->umin_value;
dst_reg->smax_value = dst_reg->umax_value;
However, if umin_value and umax_value of dst_reg cross the sign boundary
(i.e., if (s64)dst_reg->umin_value > (s64)dst_reg->umax_value), then we
will end up with smin_value > smax_value, which is unsound.
Previous works [1, 2] have discovered and reported this issue. Our tool
Agni [2, 3] consideres it a false positive. This is because, during the
verification of the abstract operator scalar_min_max_and(), Agni restricts
its inputs to those passing through reg_bounds_sync(). This mimics
real-world verifier behavior, as reg_bounds_sync() is invariably executed
at the tail of every abstract operator. Therefore, such behavior is
unlikely in an actual verifier execution.
However, it is still unsound for an abstract operator to set signed bounds
such that smin_value > smax_value. This patch fixes it, making the abstract
operator sound for all (well-formed) inputs.
It is worth noting that while the previous code updated the signed bounds
(using the output unsigned bounds) only when the *input signed* bounds
were positive, the new code updates them whenever the *output unsigned*
bounds do not cross the sign boundary.
An alternative approach to fix this latent unsoundness would be to
unconditionally set the signed bounds to unbounded [S64_MIN, S64_MAX], and
let reg_bounds_sync() refine the signed bounds using the unsigned bounds
and the tnum. We found that our approach produces more precise (tighter)
bounds.
For example, consider these inputs to BPF_AND:
/* dst_reg */
var_off.value: 8608032320201083347
var_off.mask: 615339716653692460
smin_value: 8070450532247928832
smax_value: 8070450532247928832
umin_value: 13206380674380886586
umax_value: 13206380674380886586
s32_min_value: -2110561598
s32_max_value: -133438816
u32_min_value: 4135055354
u32_max_value: 4135055354
/* src_reg */
var_off.value: 8584102546103074815
var_off.mask: 9862641527606476800
smin_value: 2920655011908158522
smax_value: 7495731535348625717
umin_value: 7001104867969363969
umax_value: 8584102543730304042
s32_min_value: -2097116671
s32_max_value: 71704632
u32_min_value: 1047457619
u32_max_value: 4268683090
After going through tnum_and() -> scalar32_min_max_and() ->
scalar_min_max_and() -> reg_bounds_sync(), our patch produces the following
bounds for s32:
s32_min_value: -1263875629
s32_max_value: -159911942
Whereas, setting the signed bounds to unbounded in scalar_min_max_and()
produces:
s32_min_value: -1263875629
s32_max_value: -1
As observed, our patch produces a tighter s32 bound. We also confirmed
using Agni and SMT verification that our patch always produces signed
bounds that are equal to or more precise than setting the signed bounds to
unbounded in scalar_min_max_and().
[1] https://sanjit-bhat.github.io/assets/pdf/ebpf-verifier-range-analysis22.pdf
[2] https://link.springer.com/chapter/10.1007/978-3-031-37709-9_12
[3] https://github.com/bpfverif/agni
Co-developed-by: Matan Shachnai <m.shachnai@rutgers.edu>
Signed-off-by: Matan Shachnai <m.shachnai@rutgers.edu>
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240402212039.51815-1-harishankar.vishwanathan@gmail.com
Link: https://lore.kernel.org/bpf/20240416115303.331688-1-harishankar.vishwanathan@gmail.com
If the BTF code is enabled in the build configuration, the start/stop
BTF markers are guaranteed to exist. Only when CONFIG_DEBUG_INFO_BTF=n,
the references in btf_parse_vmlinux() will remain unsatisfied, relying
on the weak linkage of the external references to avoid breaking the
build.
Avoid GOT based relocations to these markers in the final executable by
dropping the weak attribute and instead, make btf_parse_vmlinux() return
ERR_PTR(-ENOENT) directly if CONFIG_DEBUG_INFO_BTF is not enabled to
begin with. The compiler will drop any subsequent references to
__start_BTF and __stop_BTF in that case, allowing the link to succeed.
Note that Clang will notice that taking the address of __start_BTF can
no longer yield NULL, so testing for that condition becomes unnecessary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240415162041.2491523-8-ardb+git@google.com
Many architectures' switch_mm() (e.g. arm64) do not have an smp_mb()
which the core scheduler code has depended upon since commit:
commit 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
If switch_mm() doesn't call smp_mb(), sched_mm_cid_remote_clear() can
unset the actively used cid when it fails to observe active task after it
sets lazy_put.
There *is* a memory barrier between storing to rq->curr and _return to
userspace_ (as required by membarrier), but the rseq mm_cid has stricter
requirements: the barrier needs to be issued between store to rq->curr
and switch_mm_cid(), which happens earlier than:
- spin_unlock(),
- switch_to().
So it's fine when the architecture switch_mm() happens to have that
barrier already, but less so when the architecture only provides the
full barrier in switch_to() or spin_unlock().
It is a bug in the rseq switch_mm_cid() implementation. All architectures
that don't have memory barriers in switch_mm(), but rather have the full
barrier either in finish_lock_switch() or switch_to() have them too late
for the needs of switch_mm_cid().
Introduce a new smp_mb__after_switch_mm(), defined as smp_mb() in the
generic barrier.h header, and use it in switch_mm_cid() for scheduler
transitions where switch_mm() is expected to provide a memory barrier.
Architectures can override smp_mb__after_switch_mm() if their
switch_mm() implementation provides an implicit memory barrier.
Override it with a no-op on x86 which implicitly provide this memory
barrier by writing to CR3.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Reported-by: levi.yun <yeoreum.yun@arm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> # for arm64
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Cc: <stable@vger.kernel.org> # 6.4.x
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240415152114.59122-2-mathieu.desnoyers@efficios.com
The rcu_gp_slow_register/unregister() is only useful in tests where
torture_type=rcu, so this commit therefore generates ->gp_slow_register()
and ->gp_slow_unregister() function pointers in the rcu_torture_ops
structure, and slows grace periods only when these function pointers
exist.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
For these rcu_torture_ops structure's objects defined by using static,
if the value of the function pointer in its member is not set, the default
value will be NULL, this commit therefore remove the pre-existing
initialization of function pointers to NULL.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
This commit make rcu-tasks related rcutorture test support rcu-tasks
gp state printing when the writer stall occurs or the at the end of
rcutorture test, and generate rcu_ops->get_gp_data() operation to
simplify the acquisition of gp state for different types of rcutorture
tests.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Despite there being a cur_ops->gp_kthread_dbg(), rcu_torture_writer()
unconditionally invokes vanilla RCU's show_rcu_gp_kthreads(). This is not
at all helpful when some other flavor of RCU is being tested. This commit
therefore makes rcu_torture_writer() invoke cur_ops->gp_kthread_dbg()
for RCU implementations providing this function.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Currently, the rcu_torture_pipe_update_one() writes the value (i + 1)
to rp->rtort_pipe_count, then immediately re-reads it in order to compare
it to RCU_TORTURE_PIPE_LEN. This re-read is pointless because no other
update to rp->rtort_pipe_count can occur at this point. This commit
therefore instead re-uses the (i + 1) value stored in the comparison
instead of re-reading rp->rtort_pipe_count.
Signed-off-by: linke li <lilinke99@qq.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
The "pipe_count > RCU_TORTURE_PIPE_LEN" check has a comment saying "Should
not happen, but...". This is only true when testing an RCU whose grace
periods are always long enough. This commit therefore fixes this comment.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wi7rJ-eGq+xaxVfzFEgbL9tdf6Kc8Z89rCpfcQOKm74Tw@mail.gmail.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
The rcu_torture_pipe_update_one() cannot run concurrently with any updates
of ->rtort_pipe_count, so this commit removes the extraneous READ_ONCE()
from the read from this field.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wiX_zF5Mpt8kUm_LFQpYY-mshrXJPOe+wKNwiVhEUcU9g@mail.gmail.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
kernel/configs/hardening.config turns on UBSAN for the bounds sanitizer,
as that in combination with trapping can stop the exploitation of buffer
overflows within the kernel. At the same time, hardening.config turns
off every other UBSAN sanitizer because trapping means all UBSAN reports
will be fatal and the problems brought up by other sanitizers generally
do not have security implications.
The signed integer overflow sanitizer was recently added back to the
kernel and it is default on with just CONFIG_UBSAN=y, meaning that it
gets enabled when merging hardening.config into another configuration.
While this sanitizer does have security implications like the array
bounds sanitizer, work to clean up enough instances to allow this to run
in production environments is still ramping up, which means regular
users and testers may be broken by these instances with
CONFIG_UBSAN_TRAP=y. Disable CONFIG_UBSAN_SIGNED_WRAP in
hardening.config to avoid this situation.
Fixes: 557f8c582a ("ubsan: Reintroduce signed overflow sanitizer")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240411-fix-ubsan-in-hardening-config-v1-2-e0177c80ffaa@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The initial change that added kernel/configs/hardening.config attempted
to disable all UBSAN sanitizers except for the array bounds one while
turning on UBSAN_TRAP. Unfortunately, it only got the syntax for
CONFIG_UBSAN_SHIFT correct, so configurations that are on by default
with CONFIG_UBSAN=y such as CONFIG_UBSAN_{BOOL,ENUM} do not get disabled
properly.
CONFIG_ARCH_HAS_UBSAN=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=y
CONFIG_CC_HAS_UBSAN_BOUNDS_STRICT=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS_STRICT=y
# CONFIG_UBSAN_SHIFT is not set
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_UNREACHABLE is not set
CONFIG_UBSAN_SIGNED_WRAP=y
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
# CONFIG_TEST_UBSAN is not set
Add the missing 'is not set' to each configuration that needs it so that
they get disabled as intended.
CONFIG_ARCH_HAS_UBSAN=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=y
CONFIG_CC_HAS_UBSAN_BOUNDS_STRICT=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS_STRICT=y
# CONFIG_UBSAN_SHIFT is not set
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_UNREACHABLE is not set
CONFIG_UBSAN_SIGNED_WRAP=y
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_TEST_UBSAN is not set
Fixes: 215199e3d9 ("hardening: Provide Kconfig fragments for basic options")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240411-fix-ubsan-in-hardening-config-v1-1-e0177c80ffaa@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
synchronize_rcu() users have to be processed regardless
of memory pressure so our private WQ needs to have at least
one execution context what WQ_MEM_RECLAIM flag guarantees.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
This patch introduces a small enhancement which allows to do a
direct wake-up of synchronize_rcu() callers. It occurs after a
completion of grace period, thus by the gp-kthread.
Number of clients is limited by the hard-coded maximum allowed
threshold. The remaining part, if still exists is deferred to
a main worker.
Link: https://lore.kernel.org/lkml/Zd0ZtNu+Rt0qXkfS@lothringen/
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Add an rcu_sr_normal() trace event. It takes three arguments
first one is the name of RCU flavour, second one is a user id
which triggeres synchronize_rcu_normal() and last one is an
event.
There are two traces in the synchronize_rcu_normal(). On entry,
when a new request is registered and on exit point when request
is completed.
Please note, CONFIG_RCU_TRACE=y is required to activate traces.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
A call to a synchronize_rcu() can be optimized from a latency
point of view. Workloads which depend on this can benefit of it.
The delay of wakeme_after_rcu() callback, which unblocks a waiter,
depends on several factors:
- how fast a process of offloading is started. Combination of:
- !CONFIG_RCU_NOCB_CPU/CONFIG_RCU_NOCB_CPU;
- !CONFIG_RCU_LAZY/CONFIG_RCU_LAZY;
- other.
- when started, invoking path is interrupted due to:
- time limit;
- need_resched();
- if limit is reached.
- where in a nocb list it is located;
- how fast previous callbacks completed;
Example:
1. On our embedded devices i can easily trigger the scenario when
it is a last in the list out of ~3600 callbacks:
<snip>
<...>-29 [001] d..1. 21950.145313: rcu_batch_start: rcu_preempt CBs=3613 bl=28
...
<...>-29 [001] ..... 21950.152578: rcu_invoke_callback: rcu_preempt rhp=00000000b2d6dee8 func=__free_vm_area_struct.cfi_jt
<...>-29 [001] ..... 21950.152579: rcu_invoke_callback: rcu_preempt rhp=00000000a446f607 func=__free_vm_area_struct.cfi_jt
<...>-29 [001] ..... 21950.152580: rcu_invoke_callback: rcu_preempt rhp=00000000a5cab03b func=__free_vm_area_struct.cfi_jt
<...>-29 [001] ..... 21950.152581: rcu_invoke_callback: rcu_preempt rhp=0000000013b7e5ee func=__free_vm_area_struct.cfi_jt
<...>-29 [001] ..... 21950.152582: rcu_invoke_callback: rcu_preempt rhp=000000000a8ca6f9 func=__free_vm_area_struct.cfi_jt
<...>-29 [001] ..... 21950.152583: rcu_invoke_callback: rcu_preempt rhp=000000008f162ca8 func=wakeme_after_rcu.cfi_jt
<...>-29 [001] d..1. 21950.152625: rcu_batch_end: rcu_preempt CBs-invoked=3612 idle=....
<snip>
2. We use cpuset/cgroup to classify tasks and assign them into
different cgroups. For example "backgrond" group which binds tasks
only to little CPUs or "foreground" which makes use of all CPUs.
Tasks can be migrated between groups by a request if an acceleration
is needed.
See below an example how "surfaceflinger" task gets migrated.
Initially it is located in the "system-background" cgroup which
allows to run only on little cores. In order to speed it up it
can be temporary moved into "foreground" cgroup which allows
to use big/all CPUs:
cgroup_attach_task():
-> cgroup_migrate_execute()
-> cpuset_can_attach()
-> percpu_down_write()
-> rcu_sync_enter()
-> synchronize_rcu()
-> now move tasks to the new cgroup.
-> cgroup_migrate_finish()
<snip>
rcuop/1-29 [000] ..... 7030.528570: rcu_invoke_callback: rcu_preempt rhp=00000000461605e0 func=wakeme_after_rcu.cfi_jt
PERFD-SERVER-1855 [000] d..1. 7030.530293: cgroup_attach_task: dst_root=3 dst_id=22 dst_level=1 dst_path=/foreground pid=1900 comm=surfaceflinger
TimerDispatch-2768 [002] d..5. 7030.537542: sched_migrate_task: comm=surfaceflinger pid=1900 prio=98 orig_cpu=0 dest_cpu=4
<snip>
"Boosting a task" depends on synchronize_rcu() latency:
- first trace shows a completion of synchronize_rcu();
- second shows attaching a task to a new group;
- last shows a final step when migration occurs.
3. To address this drawback, maintain a separate track that consists
of synchronize_rcu() callers only. After completion of a grace period
users are deferred to a dedicated worker to process requests.
4. This patch reduces the latency of synchronize_rcu() approximately
by ~30-40% on synthetic tests. The real test case, camera launch time,
shows(time is in milliseconds):
1-run 542 vs 489 improvement 9%
2-run 540 vs 466 improvement 13%
3-run 518 vs 468 improvement 9%
4-run 531 vs 457 improvement 13%
5-run 548 vs 475 improvement 13%
6-run 509 vs 484 improvement 4%
Synthetic test(no "noise" from other callbacks):
Hardware: x86_64 64 CPUs, 64GB of memory
Linux-6.6
- 10K tasks(simultaneous);
- each task does(1000 loops)
synchronize_rcu();
kfree(p);
default: CONFIG_RCU_NOCB_CPU: takes 54 seconds to complete all users;
patch: CONFIG_RCU_NOCB_CPU: takes 35 seconds to complete all users.
Running 60K gives approximately same results on my setup. Please note
it is without any interaction with another type of callbacks, otherwise
it will impact a lot a default case.
5. By default it is disabled. To enable this perform one of the
below sequence:
echo 1 > /sys/module/rcutree/parameters/rcu_normal_wake_from_gp
or pass a boot parameter "rcutree.rcu_normal_wake_from_gp=1"
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Co-developed-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
The rcuc-starvation output from print_cpu_stall_info() might overflow the
buffer if there is a huge difference in jiffies difference. The situation
might seem improbable, but computers sometimes get very confused about
time, which can result in full-sized integers, and, in this case,
buffer overflow.
Also, the unsigned jiffies difference is printed using %ld, which is
normally for signed integers. This is intentional for debugging purposes,
but it is not obvious from the code.
This commit therefore changes sprintf() to snprintf() and adds a
clarifying comment about intention of %ld format.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 245a629825 ("rcu: Dump rcuc kthread status for CPUs not reporting quiescent state")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
There is a possibility of buffer overflow in
show_rcu_tasks_trace_gp_kthread() if counters, passed
to sprintf() are huge. Counter numbers, needed for this
are unrealistically high, but buffer overflow is still
possible.
Use snprintf() with buffer size instead of sprintf().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: edf3775f0a ("rcu-tasks: Add count for idle tasks on offline CPUs")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
The synchronize_srcu() has been removed by commit("rcu-tasks: Eliminate
deadlocks involving do_exit() and RCU tasks") in rcu_tasks_postscan.
This commit therefore fixes the tasks_rcu_exit_srcu_stall_timer comment.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Because the Tasks RCU ->rtp_exit_list is initialized at rcu_init()
time while there is only one CPU running with interrupts disabled, it
is not possible for an exiting task to encounter an uninitialized list.
This commit therefore replaces the conditional initialization with
a WARN_ON_ONCE().
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Closes: https://lore.kernel.org/all/ZdiNXmO3wRvmzPsr@lothringen/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tasks Trace RCU needs a single-byte cmpxchg(), but no such thing exists.
Therefore, rcu_trc_cmpxchg_need_qs() emulates one using field substitution
and a four-byte cmpxchg(), such that the other three bytes are always
atomically updated to their old values. This works, but results in
false-positive KCSAN failures because as far as KCSAN knows, this
cmpxchg() operation is updating all four bytes.
This commit therefore encloses the cmpxchg() in a data_race() and adds
a single-byte instrument_atomic_read_write(), thus telling KCSAN exactly
what is going on so as to avoid the false positives.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Currently, there are rcu_data structure fields named ->rcu_onl_gp_seq
and ->rcu_ofl_gp_seq that track the rcu_state.gp_flags field at the
time of the corresponding CPU's last online or offline operation,
respectively. However, this information is not particularly useful.
It would be better to instead track the grace period state kept
in rcu_state.gp_state. This would also be consistent with the
initialization in rcu_boot_init_percpu_data(), which is to RCU_GP_CLEANED
(an rcu_state.gp_state value), and also with the diagnostics in
rcu_implicit_dynticks_qs(), whose format is consistent with an integer,
not a bitmask.
This commit therefore makes this change and changes the names to
->rcu_onl_gp_flags and ->rcu_ofl_gp_flags, respectively.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
The rcu_state.n_online_cpus value is only ever updated by CPU-hotplug
operations, which are serialized. However, this value is read locklessly.
This commit therefore marks those reads. While in the area, it also
adds ASSERT_EXCLUSIVE_WRITER() calls just in case parallel CPU hotplug
becomes a thing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
The rcu_sync structure's ->gp_count field is updated under the protection
of ->rss_lock, but read locklessly, and KCSAN noted the data race.
This commit therefore uses WRITE_ONCE() to do this update to clearly
document its racy nature.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
This commit adds READ_ONCE() to a lockless diagnostic read from
rcu_state.gp_flags to avoid giving the compiler any chance whatsoever
of confusing the diagnostic state printed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Because Tiny RCU is used only in kernels built with either
CONFIG_PREEMPT_NONE=y or CONFIG_PREEMPT_VOLUNTARY=y, there has not been
any need for TINY RCU to explicitly disable preemption. However, the
prospect of lazy preemption changes that, and preemption means that
the non-atomic increment in synchronize_rcu() can be preempted, with
the possibility that one of the increments is lost. This could cause
failures for users of the APIs that poll RCU grace periods.
This commit therefore adds the needed preempt_disable() and
preempt_enable() call to Tiny RCU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
The TINY_RCU rcu_process_callbacks() function is only ever invoked from
a softirq handler, which means that BH is already disabled. This commit
therefore removes the redundant local_bh_disable() and local_bh_ennable()
from this function.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Currently, if a Kconfig option depends on TASKS_RCU, it conditionally does
"select TASKS_RCU if PREEMPTION". This works, but requires any change in
this enablement logic to be replicated across all such "select" clauses.
This commit therefore creates a new NEED_TASKS_RCU Kconfig option so
that the default value of TASKS_RCU can depend on a combination of this
new option and any needed enablement logic, so that this logic is in
one place.
While in the area, also anticipate a likely future change by adding
PREEMPT_AUTO to that logic.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Because Tiny SRCU is used only in kernels built with either
CONFIG_PREEMPT_NONE=y or CONFIG_PREEMPT_VOLUNTARY=y, there has not
been any need for TINY SRCU to explicitly disable preemption. However,
the prospect of lazy preemption changes that, and the lazy-preemption
patches do result in rcutorture runs finding both too-short grace periods
and grace-period hangs for Tiny SRCU.
This commit therefore adds the needed preempt_disable() and
preempt_enable() calls to Tiny SRCU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Right now, TINY_RCU depends on (!PREEMPTION && !SMP), which has served the
kernel well for many years due to the fact that PREEMPT_RCU is normally
a synonym for PREEMPTION. But with the advent of lazy preemption,
it will be possible to have non-preemptible RCU in a preemptible kernel,
so that kernels could be built with PREEMPT_RCU=n and PREEMPTION=y.
This commit therefore makes TINY_RCU depend on (!PREEMPT_RCU && !SMP),
thus allowing for a non-preemptible RCU in preemptible kernels.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
