If the RX completion indicates RX buffers errors, the RX ring will be
disabled by firmware and no packets will be received on that ring from
that point on. Recover by resetting the device.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is logic to check that the RX/TPA consumer index is the expected
index to work around a hardware problem. However, the potentially bad
consumer index is first used to index into an array to reference an entry.
This can potentially crash if the bad consumer index is beyond legal
range. Improve the logic to use the consumer index for dereferencing
after the validity check and log an error message.
Fixes: fa7e28127a ("bnxt_en: Add workaround to detect bad opaque in rx completion (part 2)")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been
enabled for this skb. It does fix the issue where normal socks that
aren't expecting a timestamp will not wake up on select, but when a
user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work.
Signed-off-by: Paul Thomas <pthomas8589@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use constants provided by ethtool.h for speed and duplex values
instead of raw integer constants to increase code readability.
thunder_bgx already uses SPEED_UNKNOWN and DUPLEX_UNKNOWN constants,
also provided by ethtool.h.
Signed-off-by: Michael Zhivich <mzhivich@akamai.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant,
which is defined as -1, resulting in value truncation and
thus incorrect test results against SPEED_UNKNOWN.
For example, the following test will print "False":
u16 speed = SPEED_UNKNOWN;
if (speed == SPEED_UNKNOWN)
printf("True");
else
printf("False");
Change storage of speed to use u32 to avoid this issue.
Signed-off-by: Michael Zhivich <mzhivich@akamai.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant,
which is defined as -1, resulting in value truncation and
thus incorrect test results against SPEED_UNKNOWN.
For example, the following test will print "False":
u16 speed = SPEED_UNKNOWN;
if (speed == SPEED_UNKNOWN)
printf("True");
else
printf("False");
Change storage of speed to use u32 to avoid this issue.
Signed-off-by: Michael Zhivich <mzhivich@akamai.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose the following ASIC information via devlink info command:
- Driver name
- Hardware revision
- Firmware PSID
- Running firmware version
Standard output example:
$ devlink dev info pci/0000:03:00.0
pci/0000:03:00.0:
driver mlxsw_spectrum
versions:
fixed:
hw.revision A0
fw.psid MT_2750110033
running:
fw.version 13.1910.622
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add MGIR register. MGIR, Management General Information Register, allows
software to query the hardware and firmware general information.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When hclgevf_client_start() fails or VF driver unloaded, there is
nobody to disable keep_alive_timer.
So this patch fixes them.
Fixes: a6d818e31d ("net: hns3: Add vport alive state checking support")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The checking of HCLGEVF_STATE_RST_HANDLING flag in the
hclgevf_reset_task_schedule() will make some scheduling of
reset pending fail. This flag will be checked in the
hclgevf_reset_service_task(), it is unnecessary to check it
in the hclgevf_reset_task_schedule(). So this patch removes it.
Fixes: 35a1e50343 ("net: hns3: Add VF Reset Service Task to support event handling")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds error handler for the failure of command queue
initialization both PF and VF.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the command queue needs re-initialization, the mailbox handling
task should do nothing, otherwise this task will just get some error
print.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ongoing lower-level reset will fail when there is a higher-level
reset occurs, so the error handler should deal with this situation.
Fixes: 6a5f6fa382 ("net: hns3: add error handler for hclgevf_reset()")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When hardware reset does not finish, the driver should not
request a new reset, otherwise the ongoing hardware reset
will get problem.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is unnecessary to deal with the new coming reset if
it is lower than the ongoing one.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the reset has been done successfully, the ongoing reset timer
is unnecessary.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hns3_client_stop() should be called after unregister_netdev(),
otherwise the ongoing reset task may start the client just after it.
Fixes: a6d818e31d ("net: hns3: Add vport alive state checking support")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a vport is not alive, it is unnecessary to notify it to reset
before PF asserting a reset. So before inform vport to reset,
we need to check its alive state firstly.
Fixes: aa5c4f175b ("net: hns3: add reset handling for VF when doing PF reset")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reinitializing, the vport alive state needs to be set up.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When resetting, the vport alive state should be set to default,
otherwise the alive state of the vport whose driver not running
is wrong before the timer to check it out.
Fixes: a6d818e31d ("net: hns3: Add vport alive state checking support")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until support is added to the offload drivers, they need to be able to
reject routes with an IPv6 gateway. To that end add a flag to fib_info
that indicates if any fib_nh has a v6 gateway. The flag allows the drivers
to efficiently know the use of a v6 gateway without walking all fib_nh
tied to a fib_info each time a route is added.
Update mlxsw and rocker to reject the routes with extack message as to why.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for an IPv6 gateway to rtable. Since a gateway is either
IPv4 or IPv6, make it a union with rt_gw4 where rt_gw_family decides
which address is in use.
When dumping the route data, encode an ipv6 nexthop using RTA_VIA.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To allow the gateway to be either an IPv4 or IPv6 address, remove
rt_uses_gateway from rtable and replace with rt_gw_family. If
rt_gw_family is set it implies rt_uses_gateway. Rename rt_gateway
to rt_gw4 to represent the IPv4 version.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the gateway in a fib_nh_common to be from a different address
family than the outer fib{6}_nh. To that end, replace nhc_has_gw with
nhc_gw_family and update users of nhc_has_gw to check nhc_gw_family.
Now nhc_family is used to know if the nh_common is part of a fib_nh
or fib6_nh (used for container_of to get to route family specific data),
and nhc_gw_family represents the address family for the gateway.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a significant number of reports that re-enabling ASPM causes
different issues, ranging from decreased performance to system not
booting at all. This affects only a minority of users, but the number
of affected users is big enough that we better switch off ASPM again.
This will hurt notebook users who are not affected by the issues, they
may see decreased battery runtime w/o ASPM. With the PCI core folks is
being discussed to add generic sysfs attributes to control ASPM.
Once this is in place brave enough users can re-enable ASPM on their
system.
Fixes: a99790bf5c ("r8169: Reinstate ASPM Support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series provides misc updates to mlx5 driver
1) Aya Levin (1): Handle event of power detection in the PCIE slot
2) Eli Britstein (6):
Some TC VLAN related updates and fixes to the previous VLAN modify action
support patchset.
Offload TC e-switch rules with egress/ingress VLAN devices
3) Max Gurtovoy (1): Fix double mutex initialization in esiwtch.c
4) Tariq Toukan (3): Misc small updates
A write memory barrier is sufficient in EQ ci update
Obsolete param field holding a constant value
Unify logic of MTU boundaries
5) Tonghao Zhang (4): Misc updates to en_tc.c
Make the log friendly when decapsulation offload not supported
Remove 'parse_attr' argument in parse_tc_fdb_actions()
Deletes unnecessary setting of esw_attr->parse_attr
Return -EOPNOTSUPP when attempting to offload an unsupported action
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcp8RLAAoJEEg/ir3gV/o+etQH/ArD5o0gKsQdro02oLIQ97t8
t3DrT07jv+C3sHzV1uVK76mikZdao7Dgjj132quB5HLEnZfpJ0HWbbQ1ZGAd124P
3vaONL47bDAxJM/5P4JM18dtQrLNJEJ9vPS3fK5HyR6qpnjbXSVKnwdN5cFtidoj
B+CGxDFizx9WuYaRugrW5NVatHvZIgfigYf1LctrDyVV8yzJLwb+5xiDMJ9c6v28
QONVpvfuwk294T/Hs1mN3z1V4IrypV1ZuSKcbXIklFdabV+p0tdn6OYTOmtyQ0U7
XwIomQIn0QqU5CHPAMdgANymle2Qb+qx9fRZ+4hpuPdLIFM/BAP35ZEofVNVMfg=
=2qTS
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2019-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mamameed says:
====================
mlx5-updates-2019-04-02
This series provides misc updates to mlx5 driver
1) Aya Levin (1): Handle event of power detection in the PCIE slot
2) Eli Britstein (6):
Some TC VLAN related updates and fixes to the previous VLAN modify action
support patchset.
Offload TC e-switch rules with egress/ingress VLAN devices
3) Max Gurtovoy (1): Fix double mutex initialization in esiwtch.c
4) Tariq Toukan (3): Misc small updates
A write memory barrier is sufficient in EQ ci update
Obsolete param field holding a constant value
Unify logic of MTU boundaries
5) Tonghao Zhang (4): Misc updates to en_tc.c
Make the log friendly when decapsulation offload not supported
Remove 'parse_attr' argument in parse_tc_fdb_actions()
Deletes unnecessary setting of esw_attr->parse_attr
Return -EOPNOTSUPP when attempting to offload an unsupported action
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
During hash filter programming, driver needs to return ENOSPC error
intead of EAGAIN when TCAM is full.
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This hook only implements a minimal set of ioctl hooks to be able to access
MII regs by using phytool.
When using this simple MAC controller, it's pretty difficult to do
debugging of the PHY chip without checking MII regs.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This set adds a minimal set of ethtool hooks to the driver, which provide a
decent amount of link information via ethtool.
With this change, running `ethtool ethX` in user-space provides all the
neatly-formatted information about the link (what was negotiated, what is
advertised, etc).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently mskid is unsigned and hence comparisons with negative
error return values are always false. Fix this by making mskid an
int.
Fixes: f058e46855 ("net: hns: fix ICMP6 neighbor solicitation messages discard problem")
Addresses-Coverity: ("Operands don't affect result")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In contrast to switching rx irq coalescing off what fixed an issue,
switching tx irq coalescing off is merely a latency optimization,
therefore net-next. As part of this change:
- Remove INTT_0 .. INTT_3 constants, they aren't used.
- Remove comment in rtl_hw_start_8169(), we now have a detailed
description by the code in rtl_set_coalesce().
- Due to switching irq coalescing off per default we don't need the
initialization in rtl_hw_start_8168(). If ethtool is used to switch
on coalescing then rtl_set_coalesce() will configure this register.
For the sake of completeness: This patch just changes the default.
Users still have the option to configure irq coalescing via ethtool.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minor comment merge conflict in mlx5.
Staging driver has a fixup due to the skb->xmit_more changes
in 'net-next', but was removed in 'net'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose a new helper that wraps the logic for setting the
netdevice's MTU boundaries.
Use it for the different components (Eth, rep, IPoIB).
Set the netdevice min MTU to ETH_MIN_MTU, and the max according
to both the FW capability and the kernel definition.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The LRO WQE size is a constant, obsolete the parameter field
that holds it.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Soften the memory barrier call of mb() by a sufficient wmb() in the
consumer index update of the event queues.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
If we have a match for the same value of a rewrite field, there is no
point for the rewrite. In order to save rewrite actions, and avoid
entirely rewrite actions (if all rewrites are the same), ignore such
rewrite fields.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Offload TC rule on a VLAN device by matching the VLAN properties
of the VLAN device and emulating vlan pop actions.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Upon redirection to an uplink VLAN device, emulate vlan push actions
according to the VLAN properties of the VLAN device and redirect to
the uplink.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Changing the prio field of the VLAN is not supported. With
commit 37410902874c ("net/mlx5e: Support VLAN modify action") zero
value indicated "no-change". Allow the vid rewrite if the prio match
is the same as the prio set value.
Fixes: 37410902874c ("net/mlx5e: Support VLAN modify action")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Rewrite of the packet in the VLAN offset may corrupt the packet if it's
not VLAN tagged. Deny the rewrite in this case.
Fixes: 37410902874c ("net/mlx5e: Support VLAN modify action")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The headers criteria and value pointers may be either of the inner
packet, if a tunnel exists, or of the outer. Simplify the code by using
helper functions to retrieve them.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* Now the encapsulation is not supported for mlx5 VFs. When we try to
offload that action, the -EINVAL is returned, but not -EOPNOTSUPP.
This patch changes the returned value and ignore to confuse user.
The command is shown as below [1].
* When max modify header action is zero, we return -EOPNOTSUPP
directly. In this way, we can ignore wrong message info (e.g.
"mlx5: parsed 0 pedit actions, can't do more"). This happens when
offloading pedit actions on mlx(cx4) VFs. The command is shown as below [2].
For example: (p2p1_0 is VF net device)
[1]
$ tc filter add dev p2p1_0 protocol ip parent ffff: prio 1 flower skip_sw \
src_mac e4:11:22:33:44:01 \
action tunnel_key set \
src_ip 1.1.1.100 \
dst_ip 1.1.1.200 \
dst_port 4789 id 100 \
action mirred egress redirect dev vxlan0
[2]
$ tc filter add dev p2p1_0 parent ffff: protocol ip prio 1 \
flower skip_sw dst_mac 00:10:56:fb:64:e8 \
dst_ip 1.1.1.100 src_ip 1.1.1.200 \
action pedit ex munge eth src set 00:10:56:b4:5d:20
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This patch deletes unnecessary setting of the esw_attr->parse_attr
to parse_attr in parse_tc_fdb_actions() because it is already done
by the mlx5e_flow_esw_attr_init() function.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This patch is a little improvement. Simplify the parse_tc_fdb_actions().
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
If we try to offload decapsulation actions to VFs hw, we get the log [1].
It's not friendly, because the kind of net device is null, and we don't
know what '0' means.
[1] "mlx5_core 0000:05:01.2 vf_0: decapsulation offload is not supported for net device (0)"
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Handle event of power state change in the PCIE slot. When the event
occurs, check if query power state and PCI power fields is supported. If
so, read these fields from MPEIN (management PCIE info) register and
issue a corresponding message.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This merge commit includes some misc shared code updates from mlx5-next branch needed
for net-next.
1) From Maxim, Remove un-used macros and spinlock from mlx5 code.
2) From Aya, Expose Management PCIE info register layout and add rate limit
print macros.
3) From Tariq, Compilation warning fix in fs_core.c
4) From Vu, Huy and Saeed, Improve mlx5 initialization flow:
The goal is to provide a better logical separation of mlx5 core
device initialization flow and will help to seamlessly support
creating different mlx5 device types such as PF, VF and SF
mlx5 sub-function virtual devices.
Mlx5_core driver needs to separate HCA resources from pci resources.
Its initialize/load/unload will be broken into stages:
1. Initialize common data structures
2. Setup function which initializes pci resources (for PF/VF)
or some other specific resources for virtual device
3. Initialize software objects according to hardware capabilities
4. Load all mlx5_core components
It is also necessary to detach mlx5_core mdev name/message from pci
device mdev->pdev name/message for a clearer report/debug of
different mlx5 device types.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This reverts commit 6578229d4e.
netif_receive_skb_list() doesn't support GRO, therefore we may have
scenarios with decreased performance. See discussion here [0].
[0] https://marc.info/?t=155403847400001&r=1&w=2
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
