This patch removes the use of likely and unlikely in xsk.h since they
create a dependency on Linux headers as reported by several
users. There have also been reports that the use of these decreases
performance as the compiler puts the code on two different cache lines
instead of on a single one. All in all, I think we are better off
without them.
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The ring buffer code of XDP sockets is missing a memory barrier on the
consumer side between the load of the data and the write that signals
that it is ok for the producer to put new data into the buffer. On
architectures that does not guarantee that stores are not reordered
with older loads, the producer might put data into the ring before the
consumer had the chance to read it. As IA does guarantee this
ordering, it would only need a compiler barrier here, but there are no
primitives in barrier.h for this specific case (hinder writes to be ordered
before older reads) so I had to add a smp_mb() here which will
translate into a run-time synch operation on IA.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Let's print btf id of map similar to the way we are printing it
for programs.
Sample output:
user@test# bpftool map -f
61: lpm_trie flags 0x1
key 20B value 8B max_entries 1 memlock 4096B
133: array name test_btf_id flags 0x0
key 4B value 4B max_entries 4 memlock 4096B
pinned /sys/fs/bpf/test100
btf_id 174
170: array name test_btf_id flags 0x0
key 4B value 4B max_entries 4 memlock 4096B
btf_id 240
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Let's move the final newline printing in show_map_close_plain() at
the end of the function because it looks correct and consistent with
prog.c. Also let's do related changes for the line which prints
pinned file name.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for recently added BPF_PROG_TYPE_CGROUP_SYSCTL program type
and BPF_CGROUP_SYSCTL attach type.
Example of bpftool output with sysctl program from selftests:
# bpftool p load ./test_sysctl_prog.o /mnt/bpf/sysctl_prog type cgroup/sysctl
# bpftool p l
9: cgroup_sysctl name sysctl_tcp_mem tag 0dd05f81a8d0d52e gpl
loaded_at 2019-04-16T12:57:27-0700 uid 0
xlated 1008B jited 623B memlock 4096B
# bpftool c a /mnt/cgroup2/bla sysctl id 9
# bpftool c t
CgroupPath
ID AttachType AttachFlags Name
/mnt/cgroup2/bla
9 sysctl sysctl_tcp_mem
# bpftool c d /mnt/cgroup2/bla sysctl id 9
# bpftool c t
CgroupPath
ID AttachType AttachFlags Name
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Using %ld for printing out value of ptrdiff_t type is not portable
between 32-bit and 64-bit archs. This is causing compilation errors for
libbpf on 32-bit platform (discovered as part of an effort to integrate
libbpf into systemd ([0])). Proper formatter is %td, which is used in
this patch.
v2->v1:
- add Reported-by
- provide more context on how this issue was discovered
[0] https://github.com/systemd/systemd/pull/12151
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds tests validating that VRF and BPF-LWT
encap work together well, as requested by David Ahern.
Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* Fixes for nested VMX with ept=0
* Fixes for AMD (APIC virtualization, NMI injection)
* Fixes for Hyper-V under KVM and KVM under Hyper-V
* Fixes for 32-bit SMM and tests for SMM virtualization
* More array_index_nospec peppering
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJctdrUAAoJEL/70l94x66Deq8H/0OEIBBuDt53nPEHXufNSV1S
uzIVvwJoL6786URWZfWZ99Z/NTTA1rn9Vr/leLPkSidpDpw7IuK28KZtEMP2rdRE
Sb8eN2g4SoQ51ZDSIMUzjcx9VGNqkH8CWXc2yhDtTUSD21S3S1kidZ0O0YbmetkJ
OwF1EDx4m7JO6EUHaJhIfdTUb9ItRC1Vfo7hpOuRVxPx2USv5+CLbexpteKogMcI
5WDaXFIRwUWW6Z8Bwyi7yA9gELKcXTTXlz9T/A7iKeqxRMLBazVKnH8h7Lfd0M0A
wR4AI+tE30MuHT7WLh1VOAKZk6TDabq9FJrva3JlDq+T+WOjgUzYALLKEd4Vv4o=
=zsT5
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"5.1 keeps its reputation as a big bugfix release for KVM x86.
- Fix for a memory leak introduced during the merge window
- Fixes for nested VMX with ept=0
- Fixes for AMD (APIC virtualization, NMI injection)
- Fixes for Hyper-V under KVM and KVM under Hyper-V
- Fixes for 32-bit SMM and tests for SMM virtualization
- More array_index_nospec peppering"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracing
KVM: fix spectrev1 gadgets
KVM: x86: fix warning Using plain integer as NULL pointer
selftests: kvm: add a selftest for SMM
selftests: kvm: fix for compilers that do not support -no-pie
selftests: kvm/evmcs_test: complete I/O before migrating guest state
KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernels
KVM: x86: Don't clear EFER during SMM transitions for 32-bit vCPU
KVM: x86: clear SMM flags before loading state while leaving SMM
KVM: x86: Open code kvm_set_hflags
KVM: x86: Load SMRAM in a single shot when leaving SMM
KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU
KVM: x86: Raise #GP when guest vCPU do not support PMU
x86/kvm: move kvm_load/put_guest_xcr0 into atomic context
KVM: x86: svm: make sure NMI is injected after nmi_singlestep
svm/avic: Fix invalidate logical APIC id entry
Revert "svm: Fix AVIC incomplete IPI emulation"
kvm: mmu: Fix overflow on kvm mmu page limit calculation
KVM: nVMX: always use early vmcs check when EPT is disabled
KVM: nVMX: allow tests to use bad virtual-APIC page address
...
Picking the changes from:
Fixes: b5bdbb6ccd ("ALSA: uapi: #include <time.h> in asound.h")
Which entails no changes in the tooling side.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lkml.kernel.org/n/tip-15o4twfkbn6nny9aus90dyzx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Bastian reported broken 'perf top -p PID' command, it won't display any
data.
The problem is that for -p option we monitor single thread, so we don't
enable time in samples, because it's not needed.
However since commit 16c66bc167 we use ordered queues to stash data
plus later commits added logic for dropping samples in case there's big
load and we don't keep up. All this needs timestamp for sample. Enabling
it unconditionally for perf top.
Reported-by: Bastian Beischer <bastian.beischer@rwth-aachen.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bastian beischer <bastian.beischer@rwth-aachen.de>
Fixes: 16c66bc167 ("perf top: Add processing thread")
Link: http://lkml.kernel.org/r/20190415125333.27160-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On 32-bits platform with more than 32 registers, the 64 bits mask is
truncate to the lower 32 bits and the return value of hweight_long will
always smaller than 32. When kernel outputs more than 32 registers, but
the user perf program only counts 32, there will be a data mismatch
result to overflow check fail.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: 6a21c0b5c2 ("perf tools: Add core support for sampling intr machine state regs")
Fixes: d03f217054 ("perf tools: Expand perf_event__synthesize_sample()")
Fixes: 0f6a30150c ("perf tools: Support user regs and stack in sample parsing")
Link: http://lkml.kernel.org/r/29ad7947dc8fd1ff0abd2093a72cc27a2446be9f.1554883878.git.han_mao@c-sky.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There was a missing comparison with 0 when checking if type is "s64" or
"u64". Therefore, the body of the if-statement was entered if "type" was
"u64" or not "s64", which made the first strcmp() redundant since if
type is "u64", it's not "s64".
If type is "s64", the body of the if-statement is not entered but since
the remainder of the function consists of if-statements which will not
be entered if type is "s64", we will just return "val", which is
correct, albeit at the cost of a few more calls to strcmp(), i.e., it
will behave just as if the if-statement was entered.
If type is neither "s64" or "u64", the body of the if-statement will be
entered incorrectly and "val" returned. This means that any type that is
checked after "s64" and "u64" is handled the same way as "s64" and
"u64", i.e., the limiting of "val" to fit in for example "s8" is never
reached.
This was introduced in the kernel tree when the sources were copied from
trace-cmd in commit f7d82350e5 ("tools/events: Add files to create
libtraceevent.a"), and in the trace-cmd repo in 1cdbae6035cei
("Implement typecasting in parser") when the function was introduced,
i.e., it has always behaved the wrong way.
Detected by cppcheck.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Fixes: f7d82350e5 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/20190409091529.2686-1-rikard.falkeborn@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo reported assertion in perf stat record:
assertion failed at util/header.c:875
There's no support for this in the 'perf state record' command, disable
the feature for that case.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 258031c017 ("perf header: Add DIR_FORMAT feature to describe directory data")
Link: http://lkml.kernel.org/r/20190409100156.20303-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix lock/unlock imbalances by refactoring the code a bit and adding
calls to up_write() before return.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Addresses-Coverity-ID: 1444315 ("Missing unlock")
Addresses-Coverity-ID: 1444316 ("Missing unlock")
Fixes: a70a112317 ("perf bpf: Save BTF information as headers to perf.data")
Fixes: 606f972b13 ("perf bpf: Save bpf_prog_info information as headers to perf.data")
Link: http://lkml.kernel.org/r/20190408173355.GA10501@embeddedor
[ Simplified the exit path to have just one up_write() + return ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a simple test for SMM, based on VMX. The test implements its own
sync between the guest and the host as using our ucall library seems to
be too cumbersome: SMI handler is happening in real-address mode.
This patch also fixes KVM_SET_NESTED_STATE to happen after
KVM_SET_VCPU_EVENTS, in fact it places it last. This is because
KVM needs to know whether the processor is in SMM or not.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-no-pie was added to GCC at the same time as their configuration option
--enable-default-pie. Compilers that were built before do not have
-no-pie, but they also do not need it. Detect the option at build
time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Starting state migration after an IO exit without first completing IO
may result in test failures. We already have two tests that need this
(this patch in fact fixes evmcs_test, similar to what was fixed for
state_test in commit 0f73bbc851, "KVM: selftests: complete IO before
migrating guest state", 2019-03-13) and a third is coming. So, move the
code to vcpu_save_state, and while at it do not access register state
until after I/O is complete.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rewrite selftest to iterate over an array with input packet and
expected flow_keys. This should make it easier to extend this test
with additional cases without too much boilerplate.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add two tests to check that sequence of 1024 jumps is verifiable.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
avoids outputting a series of
value:
No space left on device
The value itself is not wrong but bpf_fd_reuseport_array_lookup_elem() can
only return it if the map was created with value_size = 8. There's nothing
bpftool can do about it. Instead of repeating this error for every key in
the map, print an explanatory warning and a specialized error.
example before:
key: 00 00 00 00
value:
No space left on device
key: 01 00 00 00
value:
No space left on device
key: 02 00 00 00
value:
No space left on device
Found 0 elements
example after:
Warning: cannot read values from reuseport_sockarray map with value_size != 8
key: 00 00 00 00 value: <cannot read>
key: 01 00 00 00 value: <cannot read>
key: 02 00 00 00 value: <cannot read>
Found 0 elements
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit bf598a8f0f ("bpftool: Improve handling of ENOENT on map dumps")
used print_entry_plain() in case of ENOENT. However, that commit introduces
dead code. Per-cpu maps are zero-filled. When reading them, it's all or
nothing. There will never be a case where some cpus have an entry and
others don't.
The truth is that ENOENT is an error case. Use print_entry_error() to
output the desired message. That function's "value" parameter is also
renamed to indicate that we never use it for an actual map value.
The output format is unchanged.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Linux kernel now supports statistics for BPF programs, and bpftool is
able to dump them. However, these statistics are not enabled by default,
and administrators may not know how to access them.
Add a paragraph in bpftool documentation, under the description of the
"bpftool prog show" command, to explain that such statistics are
available and that their collection is controlled via a dedicated sysctl
knob.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Manual pages would tell that option "-v" (lower case) would print the
version number for bpftool. This is wrong: the short name of the option
is "-V" (upper case). Fix the documentation accordingly.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The "pinmaps" keyword is present in the man page, in the verbose
description of the "bpftool prog load" command. However, it is missing
from the summary of available commands at the beginning of the file. Add
it there as well.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When trying to dump the tree of all cgroups under a given root node,
bpftool attempts to query programs of all available attach types. Some
of those attach types do not support queries, therefore several of the
calls are actually expected to fail.
Those calls set errno to EINVAL, which has no consequence for dumping
the rest of the tree. It does have consequences however if errno is
inspected at a later time. For example, bpftool batch mode relies on
errno to determine whether a command has succeeded, and whether it
should carry on with the next command. Setting errno to EINVAL when
everything worked as expected would therefore make such command fail:
# echo 'cgroup tree \n net show' | \
bpftool batch file -
To improve this, reset errno when its value is EINVAL after attempting
to show programs for all existing attach types in do_show_tree_fn().
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 569b0c7773 ("tools/bpftool: show btf id in program information")
made bpftool print an empty line after each program entry when listing
the BPF programs loaded on the system (plain output). This is especially
confusing when some programs have an associated BTF id, and others
don't. Let's remove the blank line.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
replace tab after #define with space in line with rest of definitions
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It was removed in commit 166b5a7f2c ("selftests_bpf: extend
test_tc_tunnel for UDP encap") without any explanation.
Otherwise I see:
progs/test_tc_tunnel.c:160:17: warning: taking address of packed member 'ip' of class or structure
'v4hdr' may result in an unaligned pointer value [-Waddress-of-packed-member]
set_ipv4_csum(&h_outer.ip);
^~~~~~~~~~
1 warning generated.
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Fixes: 166b5a7f2c ("selftests_bpf: extend test_tc_tunnel for UDP encap")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add test case verifying that dedup happens (INTs are deduped in this
case) and VAR/DATASEC types are not deduped, but have their referenced
type IDs adjusted correctly.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yonghong Song <yhs@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds support for VAR and DATASEC in btf_dedup(). VAR/DATASEC
are never deduplicated, but they need to be processed anyway as types
they refer to might need to be remapped due to deduplication and
compaction.
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yonghong Song <yhs@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- Compatibility fix for nvdimm-security implementations with a default
zero-key.
- Miscellaneous small fixes for out-of-bound accesses, cleanup after
initialization failures, and missing debug messages.
-----BEGIN PGP SIGNATURE-----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=zISv
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"I debated holding this back for the v5.2 merge window due to the size
of the "zero-key" changes, but affected users would benefit from
having the fixes sooner. It did not make sense to change the zero-key
semantic in isolation for the "secure-erase" command, but instead
include it for all security commands.
The short background on the need for these changes is that some NVDIMM
platforms enable security with a default zero-key rather than let the
OS specify the initial key. This makes the security enabling that
landed in v5.0 unusable for some users.
Summary:
- Compatibility fix for nvdimm-security implementations with a
default zero-key.
- Miscellaneous small fixes for out-of-bound accesses, cleanup after
initialization failures, and missing debug messages"
* tag 'libnvdimm-fixes-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: Retain security state after overwrite
libnvdimm/pmem: fix a possible OOB access when read and write pmem
libnvdimm/security, acpi/nfit: unify zero-key for all security commands
libnvdimm/security: provide fix for secure-erase to use zero-key
libnvdimm/btt: Fix a kmemdup failure check
libnvdimm/namespace: Fix a potential NULL pointer dereference
acpi/nfit: Always dump _DSM output payload
Test that neighbour entries are marked as offloaded.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Remove the broute pseudo hook, implement this from the bridge
prerouting hook instead. Now broute becomes real table in ebtables,
from Florian Westphal. This also includes a size reduction patch for the
bridge control buffer area via squashing boolean into bitfields and
a selftest.
2) Add OS passive fingerprint version matching, from Fernando Fernandez.
3) Support for gue encapsulation for IPVS, from Jacky Hu.
4) Add support for NAT to the inet family, from Florian Westphal.
This includes support for masquerade, redirect and nat extensions.
5) Skip interface lookup in flowtable, use device in the dst object.
6) Add jiffies64_to_msecs() and use it, from Li RongQing.
7) Remove unused parameter in nf_tables_set_desc_parse(), from Colin Ian King.
8) Statify several functions, patches from YueHaibing and Florian Westphal.
9) Add an optimized version of nf_inet_addr_cmp(), from Li RongQing.
10) Merge route extension to core, also from Florian.
11) Use IS_ENABLED(CONFIG_NF_NAT) instead of NF_NAT_NEEDED, from Florian.
12) Merge ip/ip6 masquerade extensions, from Florian. This includes
netdevice notifier unification.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Auhagen reported that a 2nd ping request will fail if 'fully-random'
mode is used.
Reason is that if no proto information is given, min/max are both 0,
so we set the icmp id to 0 instead of chosing a random value between
0 and 65535.
Update test case as well to catch this, without fix this yields:
[..]
ERROR: cannot ping ns1 from ns2 with ip masquerade fully-random (attempt 2)
ERROR: cannot ping ns1 from ns2 with ipv6 masquerade fully-random (attempt 2)
... becaus 2nd ping clashes with existing 'id 0' icmp conntrack and gets
dropped.
Fixes: 203f2e7820 ("netfilter: nat: remove l4proto->unique_tuple")
Reported-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=cISy
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190412' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Set of fixes that should go into this round. This pull is larger than
I'd like at this time, but there's really no specific reason for that.
Some are fixes for issues that went into this merge window, others are
not. Anyway, this contains:
- Hardware queue limiting for virtio-blk/scsi (Dongli)
- Multi-page bvec fixes for lightnvm pblk
- Multi-bio dio error fix (Jason)
- Remove the cache hint from the io_uring tool side, since we didn't
move forward with that (me)
- Make io_uring SETUP_SQPOLL root restricted (me)
- Fix leak of page in error handling for pc requests (Jérôme)
- Fix BFQ regression introduced in this merge window (Paolo)
- Fix break logic for bio segment iteration (Ming)
- Fix NVMe cancel request error handling (Ming)
- NVMe pull request with two fixes (Christoph):
- fix the initial CSN for nvme-fc (James)
- handle log page offsets properly in the target (Keith)"
* tag 'for-linus-20190412' of git://git.kernel.dk/linux-block:
block: fix the return errno for direct IO
nvmet: fix discover log page when offsets are used
nvme-fc: correct csn initialization and increments on error
block: do not leak memory in bio_copy_user_iov()
lightnvm: pblk: fix crash in pblk_end_partial_read due to multipage bvecs
nvme: cancel request synchronously
blk-mq: introduce blk_mq_complete_request_sync()
scsi: virtio_scsi: limit number of hw queues by nr_cpu_ids
virtio-blk: limit number of hw queues by nr_cpu_ids
block, bfq: fix use after free in bfq_bfqq_expire
io_uring: restrict IORING_SETUP_SQPOLL to root
tools/io_uring: remove IOCQE_FLAG_CACHEHIT
block: don't use for-inside-for in bio_for_each_segment_all
When an icmp error such as pkttoobig is received, conntrack checks
if the "inner" header (header of packet that did not fit link mtu)
is matches an existing connection, and, if so, sets that packet as
being related to the conntrack entry it found.
It was recently reported that this "related" setting also works
if the inner header is from another, different connection (i.e.,
artificial/forged icmp error).
Add a test, followup patch will add additional "inner dst matches
outer dst in reverse direction" check before setting related state.
Link: https://www.synacktiv.com/posts/systems/icmp-reachable.html
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull core fixes from Ingo Molnar:
"Fix an objtool warning plus fix a u64_to_user_ptr() macro expansion
bug"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add rewind_stack_do_exit() to the noreturn list
linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
Some netdevsim bpf debugfs files are per-sdev, yet they are defined per
netdevsim instance. Move them under sdev directory.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add C based test for a few bpf_sysctl_* helpers and bpf_strtoul.
Make sure that sysctl can be identified by name and that multiple
integers can be parsed from sysctl value with bpf_strtoul.
net/ipv4/tcp_mem is chosen as a testing sysctl, it contains 3 unsigned
longs, they all are parsed and compared (val[0] < val[1] < val[2]).
Example of output:
# ./test_sysctl
...
Test case: C prog: deny all writes .. [PASS]
Test case: C prog: deny access by name .. [PASS]
Test case: C prog: read tcp_mem .. [PASS]
Summary: 39 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test that bpf_strtol and bpf_strtoul helpers can be used to convert
provided buffer to long or unsigned long correspondingly and return both
correct result and number of consumed bytes, or proper errno.
Example of output:
# ./test_sysctl
..
Test case: bpf_strtoul one number string .. [PASS]
Test case: bpf_strtoul multi number string .. [PASS]
Test case: bpf_strtoul buf_len = 0, reject .. [PASS]
Test case: bpf_strtoul supported base, ok .. [PASS]
Test case: bpf_strtoul unsupported base, EINVAL .. [PASS]
Test case: bpf_strtoul buf with spaces only, EINVAL .. [PASS]
Test case: bpf_strtoul negative number, EINVAL .. [PASS]
Test case: bpf_strtol negative number, ok .. [PASS]
Test case: bpf_strtol hex number, ok .. [PASS]
Test case: bpf_strtol max long .. [PASS]
Test case: bpf_strtol overflow, ERANGE .. [PASS]
Summary: 36 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test that verifier handles new argument types properly, including
uninitialized or partially initialized value, misaligned stack access,
etc.
Example of output:
#456/p ARG_PTR_TO_LONG uninitialized OK
#457/p ARG_PTR_TO_LONG half-uninitialized OK
#458/p ARG_PTR_TO_LONG misaligned OK
#459/p ARG_PTR_TO_LONG size < sizeof(long) OK
#460/p ARG_PTR_TO_LONG initialized OK
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test access to file_pos field of bpf_sysctl context, both read (incl.
narrow read) and write.
# ./test_sysctl
...
Test case: ctx:file_pos sysctl:read read ok .. [PASS]
Test case: ctx:file_pos sysctl:read read ok narrow .. [PASS]
Test case: ctx:file_pos sysctl:read write ok .. [PASS]
...
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test that new value provided by user space on sysctl write can be read
by bpf_sysctl_get_new_value and overridden by bpf_sysctl_set_new_value.
# ./test_sysctl
...
Test case: sysctl_get_new_value sysctl:read EINVAL .. [PASS]
Test case: sysctl_get_new_value sysctl:write ok .. [PASS]
Test case: sysctl_get_new_value sysctl:write ok long .. [PASS]
Test case: sysctl_get_new_value sysctl:write E2BIG .. [PASS]
Test case: sysctl_set_new_value sysctl:read EINVAL .. [PASS]
Test case: sysctl_set_new_value sysctl:write ok .. [PASS]
Summary: 22 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test sysctl_get_current_value on sysctl read and write, buffers with
enough space and too small buffers to get E2BIG and truncated result,
etc.
# ./test_sysctl
...
Test case: sysctl_get_current_value sysctl:read ok, gt .. [PASS]
Test case: sysctl_get_current_value sysctl:read ok, eq .. [PASS]
Test case: sysctl_get_current_value sysctl:read E2BIG truncated .. [PASS]
Test case: sysctl_get_current_value sysctl:read EINVAL .. [PASS]
Test case: sysctl_get_current_value sysctl:write ok .. [PASS]
Summary: 16 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test w/ and w/o BPF_F_SYSCTL_BASE_NAME, buffers with enough space and
too small buffers to get E2BIG and truncated result, etc.
# ./test_sysctl
...
Test case: sysctl_get_name sysctl_value:base ok .. [PASS]
Test case: sysctl_get_name sysctl_value:base E2BIG truncated .. [PASS]
Test case: sysctl_get_name sysctl:full ok .. [PASS]
Test case: sysctl_get_name sysctl:full E2BIG truncated .. [PASS]
Test case: sysctl_get_name sysctl:full E2BIG truncated small .. [PASS]
Summary: 11 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add unit test for BPF_PROG_TYPE_CGROUP_SYSCTL program type.
Test that program can allow/deny access.
Test both valid and invalid accesses to ctx->write.
Example of output:
# ./test_sysctl
Test case: sysctl wrong attach_type .. [PASS]
Test case: sysctl:read allow all .. [PASS]
Test case: sysctl:read deny all .. [PASS]
Test case: ctx:write sysctl:read read ok .. [PASS]
Test case: ctx:write sysctl:write read ok .. [PASS]
Test case: ctx:write sysctl:read write reject .. [PASS]
Summary: 6 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add unit test to verify that program and attach types are properly
identified for "cgroup/sysctl" section name.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
