Read the STEP equalizer parameters from the BIOS during init
and transfer it to the firmware.
This table provides values to configure an equalizer at the transmitter
that can be used to compensate for PCB channel attenuation.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Link: https://lore.kernel.org/r/20230127002430.f25f871c5e17.I8390ab916c8f681229433ebc576ed37a594c6d30@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
In an EHT connection fill in the HE context command
with PPE Thresholds field from EHT Capabilities IE.
If PPE Thresholds field presents only in HE Capabilities IE,
take the thresholds from there.
If it's not present in both - set the Common Nominal Packet Padding
field from EHT Capabilities IE.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/r/20221122220713.062ac86110f2.I0bcd5ee35f4d987a49f15501985f90e0d3ce7590@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Rate scale needs to be configured to what MCS it can use per BW and NSS,
this is done by parsing our capabilities of TX and peer's capabilities of
RX and setting the minimum for rate scale usage.
Also do some cleanup removing redundant enum defines not used by
FW/Driver.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://lore.kernel.org/r/20221122220713.f71f3b4c4583.I7b5e8071df91146c4bee3e9bcb7ad62595b275e1@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
In order to support MLD, the key API is also changing to have
station masks instead of just the station ID etc. Change the
driver to support this, and add the new code in a new file so
it's more clearly separated.
For now this isn't separated at the mac80211 ops level, which
we wanted to do, but we're calling these functions in a place
when pre-start keys are installed in iwl_mvm_start_ap_ibss(),
and the function has some glue logic to mac80211. We may want
to change that later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221102165239.ed9ccd814abc.Iacc7360de68807fbac19e5b67c86504b39cc15df@changeid
Due to IMR, when host returns from hibernate, commands cannot
be sent as part of the resume flow, and so after ending
d3 the FW needs to send notifications instead of responses.
This notification indicates whether a fw reset is required.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.898ecba881b2.I13eb69bb5af08b9ac33043647eaed6b8d50e8659@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
The wowlan info notification is quite big.
(~750 bytes without the wake packet itself).
The max FW notification size is ~2K.
There might be cases where the wake packet gets truncated because of
this limit.
Separating the wake packet from the wowlan info notification allows us to
get more data without trimming it.
Note: we currently limit the wake packet to 1600 bytes.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.06d1e6aecf10.Ib3d6a46ffe71d10cbc69bdb5654e6b14c28df245@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
IMR (Isolated Memory Regions) is a mechanism to protect memory regions
from unwarranted access by agents in the system that should not have access
to that memory.
When IMR is enabled, pages in the DRAM will be located within the IMR
memory space, accessible only by the device.
As a side effect, during S4 (a.k.a hibernate) the IMR memory space
is not retained.
While the DRAM is saved to the disk and restored by the OS upon resume,
the IMR, which is hidden from the OS neither saved upon suspend nor
restored upon resume.
As a consequence of the above, it turned out that commands cannot
be sent as part of the resume flow, and so after ending
d3 the FW needs to use notifications instead of cmd-resp.
The resume flow becomes asynchronous, with a series
of notifications, starting with wowlan_info_notif, through
wowlan_pkt_notif and complete the resume flow by d3_end_notif.
This patch adds the support for wowlan info notification.
The wake packet has been removed from the wowlan info struct
and will be handled in a dedicated notification.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.3ce8deefd929.Ieba8610e8bb4bec788076371ae38becb4a3d20d5@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Using half of the efivar API with locally baked efivar_entry instances
is not the right way to use this API, and these uses impede planned work
on the efivar layer itself.
So switch to direct EFI variable store accesses: we don't need the
efivar layer anyway.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When no table data was read from ACPI, then filling the data
and returning success here will fill zero values, which means
transmit power will be limited to 0 dBm. This is clearly not
intended.
Return an error from iwl_sar_geo_init() if there's no data to
fill into the command structure.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 78a19d5285 ("iwlwifi: mvm: Read the PPAG and SAR tables at INIT stage")
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220517120044.bc45923b74e9.Id2b4362234b7f8ced82c591b95d4075dd2ec12f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
-----BEGIN PGP SIGNATURE-----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=ccps
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
brcmfmac
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
mac80211: Add support to trigger sta disconnect on hardware restart
mac80211: fix potential double free on mesh join
mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
rtw89: 8852c: process logic efuse map
rtw89: 8852c: process efuse of phycap
rtw89: support DAV efuse reading operation
rtw89: 8852c: add chip::dle_mem
rtw89: add page_regs to handle v1 chips
rtw89: add chip_info::{h2c,c2h}_reg to support more chips
rtw89: add hci_func_en_addr to support variant generation
rtw89: add power_{on/off}_func
rtw89: read chip version depends on chip ID
rtw89: pci: use a struct to describe all registers address related to DMA channel
rtw89: pci: add V1 of PCI channel address
rtw89: pci: add struct rtw89_pci_info
rtw89: 8852c: add 8852c empty files
MAINTAINERS: add devicetree bindings entry for mt76
...
====================
Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Today in the code we have two options for collecting data sync/schedule,
the two options call the same function and can lead to racing in free
resources after done.
So we call only one of two sync/schedule, and in case of sync only
call sync function without also schedule to immediately run as a side
job.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.88574097ce1b.I1b42297619d638d677a2300ed9a95105c1262101@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
To avoid a run-time false positive in the stricter FORTIFY_SOURCE
memcpy() checks, split the memcpy() into the struct and the data.
Additionally switch the data member to a flexible array to follow
modern language conventions.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210727205855.411487-64-keescook@chromium.org
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Replace zero-length array with flexible-array member and make use
of the struct_size() helper in kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220216030841.1839666-1-chi.minghao@zte.com.cn
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220209032322.37472-1-cai.huoqing@linux.dev
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Due to some issues found in integration, the command now has
the (old) station mask and TID in modify/remove instead of
the BAID, adjust accordingly.
Since we don't use modify yet (and never will with v1 of the
API), just add v1 remove inside the existing union, and use
that, this way we don't have to duplicate everything, only
the remove code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.bc424f15cc4b.I06d9acae11dc69b2500666f497017a3fd4e2acd5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Newer firmware versions will support a new queue allocation
command, in order to deal with MLD where multiple stations
are used for a single queue. Add support for the new command.
This requires some refactoring of the queue allocation API,
which now gets
- the station mask instead of the station ID
- the flags without the "enable" flag, since that's no longer
used in the new API
Additionally, this new API now requires that we remove queues
before removing a station, the firmware will no longer do that
internally. Also add support for that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.acbf22ac2b66.I2bf38578c5ca1f7ffb2011a782f772db92fc4965@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add logs in rs_fw_rate_init function. It helps in
verifying TLC Configuration while debuging TLC related bugs.
Update kernel doc for TLC_MNG_CONFIG_CMD with correct version
of struct iwl_tlc_config_cmd.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Fixes: ae4c1bb06b ("iwlwifi: rs: add support for TLC config command ver 4")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220210181930.1fd6adfb6f1e.Icc8f5fd517735fcc10db098999ff1272da291298@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sometimes RFIm can be deactivated in FW due to internal
errors. In this case, FW will send a notification to the
driver about that. Add a log message in this case since
FW logs are not always available.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220205112029.48d0a1624fec.I8f9271959fc53223fa329ab097b12fd69b498b71@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Due to preg protection we cannot write to this register
while FW is running (when FW in Halt it is ok).
since we have some cases that we need to dump this
region while FW is running remove this writing from DRV.
FW will do this writing.
Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Fixes: 89639e06d0 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.209f3078bc74.I463530bd2f40daedb39f6d9df987bb7cee209033@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Until now function just got a pointer to some buffer and used it as if
it's good to use with no boundaries about size left in the buffer.
This infra helps for internal functions ops to make sure buffer usage
is in bound of allocation.
We also add external checks with warnings to verify every internal
function didn't exceed usage of the free buffer size.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.25c90fb14968.Ic8f05581a745d08011ca29b3f42767402643e8c5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Due to some rearchitecting inside the firmware, a new BAID
allocation command is being introduced. Support it. Note
that with it the firmware no longer returns "no space" but
will crash instead, so check for that before sending the
command to the firmware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.a89fa3bd9d91.Ibe58c5d9e882dad43aa857aa1c8f54f3358c667b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
