Previously Renoir compiler gfx target version was forced to Raven.
Update driver side for completeness.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
raven_device_info is not used when KFD_SUPPORT_IOMMU_V2 is not
set.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hawaii_device_info is not used when CONFIG_DRM_AMDGPU_CIK is not
set.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When IOMMU disabled in sbios and kfd in iommuv2 path,
IOMMU resume failure blocks system resume. Don't allow kfd to
use iommu v2 when iommu is disabled.
Reported-by: youling <youling257@gmail.com>
Tested-by: youling <youling257@gmail.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When IOMMU disabled in sbios and kfd in iommuv2 path, iommuv2
init will fail. But this failure should not block amdgpu driver init.
Reported-by: youling <youling257@gmail.com>
Tested-by: youling <youling257@gmail.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can get the pdev and asic type from the adev. No need
to pass them explicitly.
v2: squash in build fix for !CONFIG_HSA_AMD from Anson
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Device manager releases device-specific resources when a driver
disconnects from a device, devm_memunmap_pages and
devm_release_mem_region calls in svm_migrate_fini are redundant.
It causes below warning trace after patch "drm/amdgpu: Split
amdgpu_device_fini into early and late", so remove function
svm_migrate_fini.
BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718
WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795
devm_release_action+0x51/0x60
Call Trace:
? memunmap_pages+0x360/0x360
svm_migrate_fini+0x2d/0x60 [amdgpu]
kgd2kfd_device_exit+0x23/0xa0 [amdgpu]
amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu]
amdgpu_device_fini_sw+0x45/0x290 [amdgpu]
amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
drm_dev_release+0x20/0x40 [drm]
release_nodes+0x196/0x1e0
device_release_driver_internal+0x104/0x1d0
driver_detach+0x47/0x90
bus_remove_driver+0x7a/0xd0
pci_unregister_driver+0x3d/0x90
amdgpu_exit+0x11/0x20 [amdgpu]
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.
v2: squash in fix for !CONFIG_HSA_AMD
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some GPUs the PCIe atomic requirement for KFD depends on the MEC
firmware version. Add a firmware version check for this. The minimum
firmware version that works without atomics can be updated in the
device_info structure for each GPU type.
Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init
because the MEC firmware is not loaded yet at the probe stage.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add u32 gfx_target_version field to kfd_node_properties and
kfd_device_info. Populate <asic>_device_info structs accordingly and
expose to sysfs.
This allows eliminating device-ID-based lookup tables in user mode for
future ASICs.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KFD support for cyan_skillfish.
v2: whitespace fixes (Alex)
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
start_cpsch and stop_cpsch can be called during kfd device
initialization or during gpu reset/recovery. So they can
run concurrently. Currently in start_cpsch and stop_cpsch,
pm_init and pm_uninit is not protected by the dpm lock.
Imagine such a case that user use packet manager's function
to submit a pm4 packet to hang hws (ie through command
cat /sys/class/kfd/kfd/topology/nodes/1/gpu_id | sudo tee
/sys/kernel/debug/kfd/hang_hws), while kfd device is under
device reset/recovery so packet manager can be not initialized.
There will be unpredictable protection fault in such case.
This patch moves pm_init/uninit inside the dpm lock and check
packet manager is initialized before using packet manager
function.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renaming packets to packet_mgr to reflect the real meaning
of this variable.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add GFX10 based Yellow Carp KFD support.
We will bypass IOMMU v2.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use it to call disply code dependent on device->drv_data
before it's set to NULL on device unplug
v5:
Move HW finilization into this callback to prevent MMIO accesses
post cpi remove.
v7:
Split kfd suspend from device exit to expdite HW related
stuff to amdgpu_pci_remove
v8:
Squash previous KFD commit into this commit to avoid compile break.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520032057.497334-1-andrey.grodzovsky@amd.com
Add the function pointer.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update kfd_supported_devices to enable Aldebaran virtualization support
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: updated MEC FW version after validating gws with debugger
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to support multi-process debugging, HWS PM4 packet
MAP_PROCESS requires an extension of 5 DWORDS to support targeting of
per-vmid SPI debug control registers as well as watch points per process.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register vram memory as MEMORY_DEVICE_PRIVATE type resource, to
allocate vram backing pages for page migration.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power Management IP is initialized/enabled before KFD init. When a
thermal throttling happens before kfd_smi_init is done, calling the KFD
SMI update function causes a stack dump by referring a NULL pointer (
smi_clients list). Check if kfd_init is completed before calling the
function.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create dedicated Aldebaran kfd2kgd callbacks to prepare
for new per-vmid register instructions for debug trap
setting functions and sending host traps.
v2: rebase (Alex)
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to arcturus, but ARCH/ACC VGPRs may now be split unevenly.
A new field in SQ_WAVE_GPR_ALLOC tracks the boundary between the two
sets of VGPRs.
Squash below patches:
drm/amdkfd: Use preprocessor for IP-specific trap handler code
drm/amdkfd: Fix VGPR restore race in gfx8/gfx9 trap handler
drm/amdkfd: Remove duplicated code in gfx9 trap handler
drm/amdkfd: Separate ARCH/ACC VGPR restore in trap handler
drm/amdkfd: Reverse order of ARCH/ACC VGPR restore in trap handler
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX10 CP firmware expects PCIe atomics support. Don't enumerate GFX10
devices on platforms (PCIe v2) that don't support PCIe atomics.
Currently, some of the applications like clinfo soft hangs on platforms
without PCIe atomics support.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the unique_id is now obtained in amdgpu in smu_late_init,
topology misses getting the value during KFD device initialization.
To work around this, we use amdgpu_amdkfd_get_unique_id to get
the unique_id at read time. Due to this, we can remove unique_id from
the kfd_dev structure, since we only need it in the KFD node properties
struct
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KFD support for dimgrey cavefish.
v2: rebase (Alex)
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add GFX10 based APU Van Gogh KFD support. We will treat Van
Gogh as "dgpu" (bypass IOMMU v2).
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow us to have different defaults per asic
in a future patch.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move doorbell allocation for a process into kfd device and
allocate doorbell space in each PDD during process creation.
Currently, KFD manages its own doorbell space but for some
devices, amdgpu would allocate the complete doorbell
space instead of leaving a chunk of doorbell space for KFD to
manage. In a system with mix of such devices, KFD would need
to request process doorbell space based on the type of device,
either from amdgpu or from its own doorbell space.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If KFD_SUPPORT_IOMMU_V2 is not set, gcc warns:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device.c:121:37: warning: ‘raven_device_info’ defined but not used [-Wunused-const-variable=]
static const struct kfd_device_info raven_device_info = {
^~~~~~~~~~~~~~~~~
As Huang Rui suggested, Raven already has the fallback path,
so it should be out of IOMMU v2 flag.
Suggested-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for reporting GPU reset events through SMI. KFD
would report both pre and post GPU reset events.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use a function pointer because the implementation is not
ASIC-specific.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to use a function pointer because the implementation is not
ASIC-specific. This fixes missing support due to a missing function
pointer on Arcturus.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We still have a few iommu issues which need to address, so force raven
as "dgpu" path for the moment.
This is to add the fallback path to bypass IOMMU if IOMMU v2 is disabled
or ACPI CRAT table not correct.
v2: Use ignore_crat parameter to decide whether it will go with IOMMUv2.
v3: Align with existed thunk, don't change the way of raven, only renoir
will use "dgpu" path by default.
v4: don't update global ignore_crat in the driver, and revise fallback
function if CRAT is broken.
v5: refine acpi crat good but no iommu support case, and rename the
title.
v6: fix the issue of dGPU initialized firstly, just modify the report
value in the node_show().
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for reporting thermal throttling events through SMI.
Also, add a counter to count the number of throttling interrupts
observed and report the count in the SMI event message.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the compute is malfunctioning or performance drops, the system admin
will use SMI (System Management Interface) tool to monitor/diagnostic what
went wrong. This patch provides an event watch interface for the user
space to register devices and subscribe events they are interested. After
registered, the user can use annoymous file descriptor's poll function
with wait-time specified and wait for events to happen. Once an event
happens, the user can use read() to retrieve information related to the
event.
VM fault event is done in this patch.
v2: - remove UNREGISTER and add event ENABLE/DISABLE
- correct kfifo usage
- move event message API to kfd_ioctl.h
v3: send the event msg in text than in binary
v4: support multiple clients
v5: move events enablement from ioctl to fd write
v6: sparse fix
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callbacks to KGD for navy flounder.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KFD support for Navy Flounder.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for GWS in Arcturus, which needs MEC2 firmware #48
or above. Fix the MEC2 version check for Vega 10 GWS support,
since Vega 10 firmware adds 0x8000 to the actual firmware
revision. We were previously declaring support where it did not
exist.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use WARN to print messages with backtrace when evictions are triggered.
This can help determine the root cause of evictions and help spot driver
bugs triggering evictions unintentionally, or help with performance tuning
by avoiding conditions that cause evictions in a specific workload.
The messages are controlled by a new module parameter that can be changed
at runtime:
echo Y > /sys/module/amdgpu/parameters/debug_evictions
echo N > /sys/module/amdgpu/parameters/debug_evictions
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdkfd add support for sienna_cichlid virtual function
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Replace SQC stores with TCP stores
- Synchronize with MSG_SAVEWAVE via lgkmcnt
- HW_REG_IB_STS is now read-only
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v4: drop get_tile_config, comment out other callbacks
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
