Sync the SoC IDs in qcom,ids.h with relevant entries from Qualcomm's LK
bootloader [1] that is used for almost all older Qualcomm SoCs.
Several of these are already supported, e.g.:
- MSM8960 -> APQ8060, MSM8260, ...
- MSM8976 -> APQ8076
- MSM8956 -> APQ8056
Others are currently being worked on, e.g.:
- MSM8909(W) -> APQ8009(W), MSM8905, MSM8209, ...
- MSM8939 -> MSM8239, ...
And even all remaining ones added are close enough to what is already
supported so that future support is realistic (if someone steps up to
do the work).
Add all of them at once to avoid having to add them one by one in the
future. This will also benefit other projects making use of the same
dt-bindings, e.g. bootloaders where adding support for all these SoCs
is a bit easier than on Linux.
[1]: 9d563e4a1d/platform/msm_shared/smem.h (L286)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104115348.25046-4-stephan@gerhold.net
QRD (Qualcomm Reference Design) = 0xb = 11 is used on many devices that
were originally derived from some reference design provided by Qualcomm.
Examples of existing devices in Linux would be:
- msm8916-longcheer-l8150/l8910, msm8916-wingtech-wt88047
- msm8953-xiaomi-daisy/tissot/vince
- msm8998-fxtec-pro1
- sm4250-oneplus-billie2
Add it to qcom,ids.h so the qcom,board-id properties can be rewritten
more clearly using the macros in a future patch set, i.e.
qcom,board-id = <QCOM_BOARD_ID(QRD, 1, 0) 0> instead of
qcom,board-id = <0x1000b 0x00>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104115348.25046-3-stephan@gerhold.net
These interconnects are modeled as clks, not interconnects, therefore
remove corresponding defines from the binding as they're unused.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-10-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Changes gpio.h DT binding header file to be published under GPLv2 or
BSD-2-Clause license terms. This change allows this GPIO generic
bindings header file to be used in software components as bootloaders
and OSes that are not published under GPLv2 terms.
All contributors to gpio.h file in copy.
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220905145555.674800-1-etienne.carriere@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The platform was deprecated in commit 6a5e69c7dd ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exclusively for s3c24xx and not shared with s3c64xx,
as well as the glue logic in Kconfig and the maintainer file entries.
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Christer Weinigel <christer@weinigel.se>
Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: openmoko-kernel@lists.openmoko.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add pinctrl macros for J784s4 SoC. These macro definitions are
similar to that of J721s2, but adding new definitions to avoid
any naming confusions in the soc dts files.
checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses
However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112142725.77785-3-a-nandan@ti.com
The SCM VMIDs represent predefined mappings that come from the
irreplaceable and non-omittable firmware that comes with every
Qualcomm SoC (unless you steal engineering samples from the factory)
and help clarify otherwise totally magic numbers which we are
required to pass to the secure world for some parts of the SoC to
work at all (with modem being the prime example).
On top of that, with changes to the rmtfs binding, secure VMIDs will
become useful to have in device trees for readability. Separate them
out and add to include/dt-bindings.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109130523.298971-3-konrad.dybcio@linaro.org
The test clock apparently it's not used by anyone upstream. Remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-8-dmitry.baryshkov@linaro.org
The test clock apparently it's not used by anyone upstream. Remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221228185237.3111988-7-dmitry.baryshkov@linaro.org
Add bindings documentation for clock TCSR driver on SM8550.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104093450.3150578-2-abel.vesa@linaro.org
Add a compatible for sa8775p platforms and relevant defines to the include
file.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109174511.1740856-14-brgl@bgdev.pl
The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221231231429.18357-6-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add bindings documentation for clock TCSR driver on SM8550.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104093450.3150578-2-abel.vesa@linaro.org
Add separate schema for QDU1000 and QRU1000 interconnect devices
to document the different NoCs on these platforms.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221216230914.21771-2-quic_molvera@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add define for the NNA power domain for the NPU in the G12A.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221202115223.39051-3-tomeu.vizoso@collabora.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Doesn't appear in the TRM I have, but it is used by the downstream
galcore driver.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221202115223.39051-2-tomeu.vizoso@collabora.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The Qualcomm SM8550 SoC has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221202232054.2666830-2-abel.vesa@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add device tree bindings for camera clock controller for
Qualcomm Technology Inc's SM6350 SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org
Add another power saving state used on SM8450. Unfortunately adding it
in proper place causes renumbering of all the opp states in sm8450.dtsi
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221207012803.114959-2-dmitry.baryshkov@linaro.org
Add the power domain index for the A3DUL domain, as described in the
R-Car V4H Series Hardware User's Manual Rev. 0.51 and later.
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com>
[geert: Manual reference]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/d61cf54b58629a76e007b9505dac7c2beb3b30db.1669740926.git.geert+renesas@glider.be
rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with and
attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled.
-----BEGIN PGP SIGNATURE-----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=sO5/
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with
and attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled"
* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: sysmon: Make QMI message rules const
drivers: remoteproc: Add Xilinx r5 remoteproc driver
firmware: xilinx: Add RPU configuration APIs
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
remoteproc: core: Use device_match_of_node()
remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
remoteproc: imx_rproc: Request mbox channel later
remoteproc: imx_rproc: Support i.MX8QM
remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
...
- ti: default to ARCH_K3 for msg manager
- mediatek: add mt8188 and mt8186 support
request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
-----BEGIN PGP SIGNATURE-----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=j33p
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom: enable sc8280xp, sm8550 and sm4250 support
- ti: default to ARCH_K3 for msg manager
- mediatek:
- add mt8188 and mt8186 support
- request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
mailbox: mtk-cmdq: Do not request irq until we are ready
mailbox: zynq-ipi: fix error handling while device_register() fails
mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
dt-bindings: mailbox: add GCE header file for mt8188
mailbox: mpfs: read the system controller's status
mailbox: mtk-cmdq: add MT8186 support
mailbox: mtk-cmdq: add gce ddr enable support flow
mailbox: mtk-cmdq: add gce software ddr enable private data
mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
mailbox: rockchip: Use device_get_match_data() to simplify the code
dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
dt-bindings: mailbox: qcom: Add SM4250 APCS compatible
- New support:
- Allwinner H616 USB PHY and A100 DPHY support
- TI J721s2, J784s4 and J721e support
- Freescale i.MX8MP PCIe PHY support
- New driver for Renesas Ethernet SERDES supporting R-Car S4-8
- Qualcomm SM8450 PCIe1 PHY support in EP mode
- Updates:
- again a big pile of updates on qcom-qmp-* drivers following the
driver split and reorganization merged earlier
- Phy order of API calls documentation update
-----BEGIN PGP SIGNATURE-----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=4HRP
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"This tme we have again a big pile of qcom-qmp-* changes, one new
driver and bunch of new hardware support.
New hardware support:
- Allwinner H616 USB PHY and A100 DPHY support
- TI J721s2, J784s4 and J721e support
- Freescale i.MX8MP PCIe PHY support
- New driver for Renesas Ethernet SERDES supporting R-Car S4-8
- Qualcomm SM8450 PCIe1 PHY support in EP mode
- Qualcomm SC8280XP PCIe PHY support (including x4 mode)
- Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings
Updates:
- A big pile of updates on qcom-qmp-* drivers following the driver
split and reorganization merged earlier
- Phy order of API calls documentation update"
* tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits)
phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
dt-bindings: phy-j721e-wiz: add j721s2 compatible string
phy: use devm_platform_get_and_ioremap_resource()
phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant
phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last
phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant
dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property
phy: qcom-qmp-pcie: drop redundant clock allocation
phy: qcom-qmp-usb: drop redundant clock allocation
phy: qcom-qmp: drop unused type header
phy: qcom-qmp-usb: drop sc8280xp reference-clock source
dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source
phy: qcom-qmp-combo: add support for updated sc8280xp binding
phy: qcom-qmp-combo: rename DP_PHY register pointer
phy: qcom-qmp-combo: rename common-register pointers
phy: qcom-qmp-combo: clean up DP clock callbacks
phy: qcom-qmp-combo: separate clock and provider registration
phy: qcom-qmp-combo: add clock registration helper
...
Including:
- Core code:
- map/unmap_pages() cleanup
- SVA and IOPF refactoring
- Clean up and document return codes from device/domain
attachment code
- AMD driver:
- Rework and extend parsing code for ivrs_ioapic, ivrs_hpet
and ivrs_acpihid command line options
- Some smaller cleanups
- Intel driver:
- Blocking domain support
- Cleanups
- S390 driver:
- Fixes and improvements for attach and aperture handling
- PAMU driver:
- Resource leak fix and cleanup
- Rockchip driver:
- Page table permission bit fix
- Mediatek driver:
- Improve safety from invalid dts input
- Smaller fixes and improvements
- Exynos driver:
- Fix driver initialization sequence
- Sun50i driver:
- Remove IOMMU_DOMAIN_IDENTITY as it has not been working
forever
- Various other fixes
-----BEGIN PGP SIGNATURE-----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=ZM/m
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core code:
- map/unmap_pages() cleanup
- SVA and IOPF refactoring
- Clean up and document return codes from device/domain attachment
AMD driver:
- Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and
ivrs_acpihid command line options
- Some smaller cleanups
Intel driver:
- Blocking domain support
- Cleanups
S390 driver:
- Fixes and improvements for attach and aperture handling
PAMU driver:
- Resource leak fix and cleanup
Rockchip driver:
- Page table permission bit fix
Mediatek driver:
- Improve safety from invalid dts input
- Smaller fixes and improvements
Exynos driver:
- Fix driver initialization sequence
Sun50i driver:
- Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever
- Various other fixes"
* tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (74 commits)
iommu/mediatek: Fix forever loop in error handling
iommu/mediatek: Fix crash on isr after kexec()
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
iommu/amd: Fix typo in macro parameter name
iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data
iommu/mediatek: Improve safety for mediatek,smi property in larb nodes
iommu/mediatek: Validate number of phandles associated with "mediatek,larbs"
iommu/mediatek: Add error path for loop of mm_dts_parse
iommu/mediatek: Use component_match_add
iommu/mediatek: Add platform_device_put for recovering the device refcnt
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
iommu/vt-d: Use real field for indication of first level
iommu/vt-d: Remove unnecessary domain_context_mapped()
iommu/vt-d: Rename domain_add_dev_info()
iommu/vt-d: Rename iommu_disable_dev_iotlb()
iommu/vt-d: Add blocking domain support
iommu/vt-d: Add device_block_translation() helper
iommu/vt-d: Allocate pasid table in device probe path
iommu/amd: Check return value of mmu_notifier_register()
iommu/amd: Fix pci device refcount leak in ppr_notifier()
...
Add Global Command Engine(GCE) header file to define the GCE thread priority,
GCE subsys id, event and constant for mt8188.
Signed-off-by: Elvis Wang <Elvis.Wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno<angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmOcmvEACgkQ+iyteGJfRso1OwCfWAZIdbdWdeEVq33zAT4/TZKE
foYAn0ebKrOX26HEAmGgZy4Ze2pdFxVo
=toMy
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Advantech EC watchdog driver
- Add support for MT6795 Helio X10 watchdog and toprgu
- Add support for MT8188 watchdog device
- Remove #ifdef guards for PM related functions
- Other fixes and improvements
* tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: aspeed: Enable pre-timeout interrupt
watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
watchdog: rn5t618: add support for read out bootstatus
watchdog: kempld: Remove #ifdef guards for PM related functions
watchdog: omap: Remove #ifdef guards for PM related functions
watchdog: twl4030: Remove #ifdef guards for PM related functions
watchdog: at91rm9200: Remove #ifdef guards for PM related functions
watchdog: Add Advantech EC watchdog driver
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795
dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema
watchdog: mediatek: mt8188: add wdt support
dt-bindings: reset: mt8188: add toprgu reset-controller header file
dt-bindings: watchdog: Add compatible for MediaTek MT8188
watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu
time around. The core framework is effectively unchanged, with the majority of
the diff going to the Qualcomm clk driver directory because they added two 3k
line files that are almost all clk data (Abel Vesa from Linaro tried to shrink
the number of lines down, but it doesn't seem to be possible without
sacrificing readability). The second big driver this time around is the
Rockchip rk3588 clk and reset unit, at _only_ 2.5k lines.
Ignoring the big clk drivers from the familiar SoC vendors, there's just a
bunch of little clk driver updates and fixes throughout here. It's the usual
set of clk data fixups to describe proper parents, or add frequencies to
frequency tables, or plug memory leaks when function calls fail. Also, some
drivers are converted to use modern clk_hw APIs, which is always nice to see.
And data is deduplicated, leading to a smaller kernel Image. Overall this batch
has a larger collection of cleanups than it typically does. Maybe that means
there are less new SoCs right now that need supporting, and the focus has
shifted to quality and reliability. I can dream.
New Drivers:
- Frequency hopping controller hardware on MediaTek MT8186
- Global clock controller for Qualcomm SM8550
- Display clock controller for Qualcomm SC8280XP
- RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
- CPU PLL on MStar/SigmaStar SoCs
- Support for the clock and reset unit of the Rockchip rk3588
Updates:
- Tracepoints for clk_rate_request structures
- Debugfs support for fractional divider clk
- Make MxL's CGU driver secure compatible
- Ingenic JZ4755 SoC clk support
- Support audio clks on X1000 SoCs
- Remove flags from univ/main/syspll child fixed factor clocks across
MediaTek platforms
- Fix clock dependency for ADC on MediaTek MT7986
- Fix parent for FlexSPI clock for i.MX93
- Add USB suspend clock on i.MX8MP
- Unmap anatop base on error for i.MX93 driver
- Change enet clock parent to wakeup_axi_root for i.MX93
- Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
- Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
- Add 320MHz and 640MHz entries to PLL146x
- Add audio shared gate and SAI clocks for i.MX8MP
- Fix a possible memory leak in the error path of rockchip PLL creation
- Fix header guard for V3S clocks
- Add IR module clock for f1c100s
- Correct the parent clocks for the (High Speed) Serial Communication
Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
Switch clocks on Renesas R-Car S4-8
- Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
R-Car V4H
- Two PLL driver fixups for the Amlogic clk driver
- Round SD clock rate to improve parent clock selection
- Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
S4-8
- Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX) serial
(SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI (RPC-IF) clocks
on Renesas R-Car V4H
- Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
Renesas RZ/G2L
- Fix endless loop on Renesas RZ/N1
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
Note: HSCIF0 is used for the serial console on the White-Hawk
development board
- Various clk DT binding improvements and conversions to YAML
- Qualcomm SM8150/SM8250 display clock controller cleaned up
- Some missing clocks for Qualcomm SM8350 added
- Qualcomm MSM8974 Global and Multimedia clock controllers transitioned
to parent_data and parent_hws
- Use parent_data and add network resets for Qualcomm IPQ8074
- Qualcomm Krait clock controller modernized
- Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
controllers
- Enable retention mode on Qualcomm SM8250 USB GDSCs
- Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
clocks which definition could be shared between platforms
- Various NULL pointer checks added for allocations
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmOXq7wRHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSU2sg/+JIguM/vYw92d3hGePFKaz5lmFXSjzRXp
HMbbnuclAzc/C7jKGwypP2GMdVxOPvzxG4cW9Q25cTw4SuELg2nIBn9UvRteCEDA
uGf8h0Xw/sJfyRhZbAlnbLxtn3qntQL8F2VbPJ+umDYnghD0Mq0WBMeHEoeXGXpb
PVdEYsgpHo3EbgCL8rjErw9XDHBTGRgNXPounpKjD3Kwmj+CXWgopsma7Hzf2G/6
VxBbcxDZA6OaEzJAKGVeIHBYLwY0aGPP2ouC2RQDBzSb7n6PjqDkOCdP6w1ab9Nl
XehAup5p5Zgd314YgQlE9BoXwhXanZyVT88D6WbfN+qjksDm9n+W+5O9suN2eLrt
h+YgmFdUAESUAJTbIyF6tiLUEIDKjKrJyU+HZX0peOhGIYbw3fMUACR+JrCbmCCZ
rTTOWh92q7v39to+QIFsKwtVLl9IlRTCaA3tbhv/FH2gplJlOhvPgulAfV+JRtTZ
1YND5adsFNsc69ZK8TTT2NzXUnU0XhocNNL1SegYXZpfHoNmg5CUQiPYMMASCJcI
V1+qznLUeUUonkhexFTMrJHGL4e4ITzESi7IOTVcJ6Wco+gXOrOMHfONbahEsCYn
UQIPC9tw9qwV6D3Sf9C8zFtBP26w7+UuJ8ZFpmhpf+fevF5i2TsG6x7Y31mlxzww
OZ+r5dsauc4=
=6vbl
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver updates from Stephen Boyd:
"A pile of clk driver updates with a small tracepoint patch to the clk
core this time around.
The core framework is effectively unchanged, with the majority of the
diff going to the Qualcomm clk driver directory because they added two
3k line files that are almost all clk data (Abel Vesa from Linaro
tried to shrink the number of lines down, but it doesn't seem to be
possible without sacrificing readability).
The second big driver this time around is the Rockchip rk3588 clk and
reset unit, at _only_ 2.5k lines.
Ignoring the big clk drivers from the familiar SoC vendors, there's
just a bunch of little clk driver updates and fixes throughout here.
It's the usual set of clk data fixups to describe proper parents, or
add frequencies to frequency tables, or plug memory leaks when
function calls fail. Also, some drivers are converted to use modern
clk_hw APIs, which is always nice to see. And data is deduplicated,
leading to a smaller kernel Image.
Overall this batch has a larger collection of cleanups than it
typically does. Maybe that means there are less new SoCs right now
that need supporting, and the focus has shifted to quality and
reliability. I can dream.
New Drivers:
- Frequency hopping controller hardware on MediaTek MT8186
- Global clock controller for Qualcomm SM8550
- Display clock controller for Qualcomm SC8280XP
- RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
- CPU PLL on MStar/SigmaStar SoCs
- Support for the clock and reset unit of the Rockchip rk3588
Updates:
- Tracepoints for clk_rate_request structures
- Debugfs support for fractional divider clk
- Make MxL's CGU driver secure compatible
- Ingenic JZ4755 SoC clk support
- Support audio clks on X1000 SoCs
- Remove flags from univ/main/syspll child fixed factor clocks across
MediaTek platforms
- Fix clock dependency for ADC on MediaTek MT7986
- Fix parent for FlexSPI clock for i.MX93
- Add USB suspend clock on i.MX8MP
- Unmap anatop base on error for i.MX93 driver
- Change enet clock parent to wakeup_axi_root for i.MX93
- Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
- Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
- Add 320MHz and 640MHz entries to PLL146x
- Add audio shared gate and SAI clocks for i.MX8MP
- Fix a possible memory leak in the error path of rockchip PLL
creation
- Fix header guard for V3S clocks
- Add IR module clock for f1c100s
- Correct the parent clocks for the (High Speed) Serial Communication
Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
Switch clocks on Renesas R-Car S4-8
- Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
R-Car V4H
- Two PLL driver fixups for the Amlogic clk driver
- Round SD clock rate to improve parent clock selection
- Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
S4-8
- Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX)
serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI
(RPC-IF) clocks on Renesas R-Car V4H
- Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
Renesas RZ/G2L
- Fix endless loop on Renesas RZ/N1
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
Note: HSCIF0 is used for the serial console on the White-Hawk
development board
- Various clk DT binding improvements and conversions to YAML
- Qualcomm SM8150/SM8250 display clock controller cleaned up
- Some missing clocks for Qualcomm SM8350 added
- Qualcomm MSM8974 Global and Multimedia clock controllers
transitioned to parent_data and parent_hws
- Use parent_data and add network resets for Qualcomm IPQ8074
- Qualcomm Krait clock controller modernized
- Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
controllers
- Enable retention mode on Qualcomm SM8250 USB GDSCs
- Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
clocks which definition could be shared between platforms
- Various NULL pointer checks added for allocations"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits)
clk: nomadik: correct struct name kernel-doc warning
clk: lmk04832: fix kernel-doc warnings
clk: lmk04832: drop superfluous #include
clk: lmk04832: drop unnecessary semicolons
clk: lmk04832: declare variables as const when possible
clk: socfpga: Fix memory leak in socfpga_gate_init()
clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
clk: st: Fix memory leak in st_of_quadfs_setup()
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
clk: Add trace events for rate requests
clk: Store clk_core for clk_rate_request
clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: mmcc-msm8974: move clock parent tables down
clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: gcc-msm8974: move clock parent tables down
clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
...
Core changes:
- Minor but nice and important documentation clean-ups.
New drivers:
- New subdriver for the Qualcomm SDM670 SoC.
- New subdriver for the Intel Moorefield SoC.
- New trivial support for the NXP Freescale i.MXRT1170 SoC.
Other changes and improvements
- A major clean-up of the Qualcomm pin control device tree bindings
by Krzysztof.
- A major header clean-up by Andy.
- Some immutable irqchip clean-up for the Actions Semiconductor
and Nuvoton drivers.
- GPIO helpers for The Cypress cy8c95x0 driver.
- Bias handling in the Mediatek MT7986 driver.
- Remove the unused pins-are-numbered concept that never flew.
-----BEGIN PGP SIGNATURE-----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=PhTP
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The two large chunks is the header clean-up from Andy and the Qualcomm
DT bindings clean-up from Krzysztof. Each which could give rise to
conflicts, but I haven't seen any.
The YAML conversions happening around the device tree is the biggest
item in the series and is the result of Rob Herrings ambition to
autovalidate these trees against strict schemas and it is paying off
in lots of bugs found and ever prettier device trees. Sooner or later
the transition will be complete, Krzysztof is fixing up all of the
Qualcomm stuff, which is pretty voluminous.
Core changes:
- minor but nice and important documentation clean-ups
New drivers:
- subdriver for the Qualcomm SDM670 SoC
- subdriver for the Intel Moorefield SoC
- trivial support for the NXP Freescale i.MXRT1170 SoC
Other changes and improvements
- major clean-up of the Qualcomm pin control device tree bindings by
Krzysztof
- major header clean-up by Andy
- some immutable irqchip clean-up for the Actions Semiconductor and
Nuvoton drivers
- GPIO helpers for The Cypress cy8c95x0 driver
- bias handling in the Mediatek MT7986 driver
- remove the unused pins-are-numbered concept that never flew"
* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
pinctrl: stm32: Remove check for pins-are-numbered
pinctrl: mediatek: common: Remove check for pins-are-numbered
pinctrl: qcom: remove duplicate included header files
pinctrl: sunxi: d1: Add CAN bus pinmuxes
pinctrl: loongson2: Fix some const correctness
pinctrl: pinconf-generic: add missing of_node_put()
pinctrl: intel: Enumerate PWM device when community has a capability
pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
pwm: lpss: Allow other drivers to enable PWM LPSS
pwm: lpss: Include headers we are the direct user of
pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
pwm: Add a stub for devm_pwmchip_add()
pinctrl: k210: call of_node_put()
pinctrl: starfive: Use existing variable gpio
dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
pinconf-generic: fix style issues in pin_config_param doc
pinctrl: pinctrl-loongson2: fix Kconfig dependency
...
-----BEGIN PGP SIGNATURE-----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=i0X1
-----END PGP SIGNATURE-----
Merge tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- DVB core changes to avoid refcount troubles and UAF
- DVB API/core has gained support for DVB-C2 and DVB-S2X
- New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c
- Removal of an unused sensor driver: s5k4ecgx
- Move microchip_csi2dc to a new directory, named after the
manufacturer
- Add media controller support to Microship drivers
- Old Atmel/Microship drivers that don't use media controler got moved
to staging
- New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support
- Allwinner A31 camera sensor driver code was now split into a bridge
and a separate processor driver
- Added a virtual stateless decoder driver in order to test core
support for stateless drivers and test userspace apps using it
- removed platform-based support for ov9650, as this is not used
anymore
- atomisp now uses videobuf2 and supports normal mmap mode
- the imx7-media-csi driver got promoted from staging
- rcar-vin driver has gained support for gen3 UDS (Up Down Scaler)
- most i2c drivers now use I2C .probe_new() kAPI
- lots of drivers fixes, cleanups and improvements
* tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits)
media: s5c73m3: Switch to GPIO descriptors
media: i2c: s5k5baf: switch to using gpiod API
media: i2c: s5k6a3: switch to using gpiod API
media: imx: remove code for non-existing config IMX_GPT_ICAP
media: si470x: Fix use-after-free in si470x_int_in_callback()
media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
media: coda: Add check for kmalloc
media: coda: Add check for dcoda_iram_alloc
dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
media: s5k4ecgx: Delete driver
media: s5k4ecgx: Switch to GPIO descriptors
media: Switch to use dev_err_probe() helper
headers: Remove some left-over license text in include/uapi/linux/v4l2-*
headers: Remove some left-over license text in include/uapi/linux/dvb/
media: usb: pwc-uncompress: Use flex array destination for memcpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
...
- Tracepoints for clk_rate_request structures
* clk-mediatek:
clk: mediatek: fix dependency of MT7986 ADC clocks
clk: mediatek: Change PLL register API for MT8186
clk: mediatek: Add new clock driver to handle FHCTL hardware
dt-bindings: clock: mediatek: Add new bindings of MediaTek frequency hopping
clk: mediatek: Export PLL operations symbols
clk: mediatek: mt8186-topckgen: Add GPU clock mux notifier
clk: mediatek: mt8186-mfg: Propagate rate changes to parent
clk: mediatek: mt8195-topckgen: Drop flags for main/univpll fixed factors
clk: mediatek: mt8192: Drop flags for main/univpll fixed factors
clk: mediatek: mt6795-topckgen: Drop flags for main/sys/univpll fixed factors
clk: mediatek: mt8173: Drop flags for main/sys/univpll fixed factors
clk: mediatek: mt8183: Drop flags for sys/univpll fixed factors
clk: mediatek: mt8183: Compress top_divs array entries
clk: mediatek: mt8186-topckgen: Drop flags for main/univpll fixed factors
clk: mediatek: clk-mtk: Allow specifying flags on mtk_fixed_factor clocks
* clk-trace:
clk: Add trace events for rate requests
clk: Store clk_core for clk_rate_request
* clk-qcom: (69 commits)
clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: mmcc-msm8974: move clock parent tables down
clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: gcc-msm8974: move clock parent tables down
clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
clk: qcom: gcc-ipq4019: switch to devm_clk_notifier_register
clk: qcom: rpmh: remove usage of platform name
clk: qcom: rpmh: rename VRM clock data
clk: qcom: rpmh: rename ARC clock data
clk: qcom: rpmh: support separate symbol name for the RPMH clocks
clk: qcom: rpmh: remove platform names from BCM clocks
clk: qcom: rpmh: drop all _ao names
clk: qcom: rpmh: reuse common duplicate clocks
clk: qcom: rpmh: group clock definitions together
clk: qcom: rpm: drop the platform from clock definitions
clk: qcom: rpm: drop the _clk suffix completely
...
* clk-microchip:
clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
clk: microchip: check for null return of devm_kzalloc()
The devicetree changes contain exactly 1000 non-merge changesets,
including a number of new arm64 SoC variants from Qualcomm and Apple,
as well as the Renesas r9a07g043f/u chip in both arm64 and riscv variants
While we have occasionally merged support for non-arm SoCs in the past,
this is now the normal path for riscv devicetree files.
The most notable changes, by SoC platform, are:
- The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M2 Ultra)
chips now have initial support. This is particularly nice as I am
typing this on a T6002 Mac Studio with only a small number of driver
patches.
- Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662), SM4250
(Snapdragon 460), SM6375 (Snapdragon 695), SDM670 (Snapdragon 670),
MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon 650) are all mobile
phone chips that are closely related to others we already support.
Adding those helps support more phones and we add several models
from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and Google
(Pixel 3a). There are also new variants of the Herobrine and Trogdor
chromebook motherboards. SA8540P is an automotive SoC used in the
Qdrive-3 development platform
- Rockchips gains no new SoC variants, but a lot of new boards:
three mobile gaming systems based on RK3326 Odroid-Go/rg351 family,
two more Anbernic gaming systems based on RK3566 and a number of
other RK356x based single-board computers.
- Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
the newly added RZ/Five is based on the same design, this now gets
reorganized in order to share most of the dts description between
the two and add the RZ/Five SMARC EVK board support.
Aside from that, there are the usual changes all over the tree:
- New boards on other platforms contain two ASpeed BMC users, two
Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based Kobo
Aura2 ebook reader, two i.MX8 based development boards, two Uniphier
Pro5 development boards, the STM32MP1 testbench board from DHCOR,
the TI K3 based BeagleBone AI-64 board, and the Mediatek Helio X10
based Sony Xperia M5 phone.
- The Starfive JH7100 source gets reorganized in order to support the
VisionFive V1 board.
- Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168,
TI, ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
spear, ... The treewide cleanups now have a lot of fixes for cache
nodes and other binding violoations.
- Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm
and Renesas platforms, adding a lot more on-chip device support
- A rework of the way that DTB overlays are built.
-----BEGIN PGP SIGNATURE-----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=WCFd
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"The devicetree changes contain exactly 1000 non-merge changesets,
including a number of new arm64 SoC variants from Qualcomm and Apple,
as well as the Renesas r9a07g043f/u chip in both arm64 and riscv
variants.
While we have occasionally merged support for non-arm SoCs in the
past, this is now the normal path for riscv devicetree files.
The most notable changes, by SoC platform, are:
- The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips
now have initial support. This is particularly nice as I am typing
this on a T6002 Mac Studio with only a small number of driver
patches.
- Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662),
SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670
(Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon
650) are all mobile phone chips that are closely related to others
we already support.
Adding those helps support more phones and we add several models
from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and
Google (Pixel 3a).
There are also new variants of the Herobrine and Trogdor chromebook
motherboards. SA8540P is an automotive SoC used in the Qdrive-3
development platform
- Rockchips gains no new SoC variants, but a lot of new boards: three
mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two
more Anbernic gaming systems based on RK3566 and a number of other
RK356x based single-board computers.
- Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
the newly added RZ/Five is based on the same design, this now gets
reorganized in order to share most of the dts description between
the two and add the RZ/Five SMARC EVK board support.
Aside from that, there are the usual changes all over the tree:
- New boards on other platforms contain two ASpeed BMC users, two
Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based
Kobo Aura2 ebook reader, two i.MX8 based development boards, two
Uniphier Pro5 development boards, the STM32MP1 testbench board from
DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek
Helio X10 based Sony Xperia M5 phone.
- The Starfive JH7100 source gets reorganized in order to support the
VisionFive V1 board.
- Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI,
ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
spear, ... The treewide cleanups now have a lot of fixes for cache
nodes and other binding violoations.
- Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and
Renesas platforms, adding a lot more on-chip device support
- A rework of the way that DTB overlays are built"
* tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits)
arm64: dts: apple: t6002: Fix GPU power domains
arm64: dts: apple: t600x-pmgr: Fix search & replace typo
arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes
arm64: dts: apple: Rename dart-sio* to sio-dart*
arch: arm64: apple: t600x: Use standard "iommu" node name
arch: arm64: apple: t8103: Use standard "iommu" node name
ARM: dts: socfpga: Fix pca9548 i2c-mux node name
dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
dt-bindings: iio: adc: qcom,spmi-vadc: extend example
arm64: dts: qcom: sc8280xp: fix UFS DMA coherency
arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie
arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI
arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI
arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI
arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI
arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI
arm64: dts: qcom: sm8450: align MMC node names with dtschema
arm64: dts: qcom: sc7180-trogdor: use generic node names
arm64: dts: qcom: sm8450-hdk: add sound support
arm64: dts: qcom: sm8450: add Soundwire and LPASS
...
Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115,
SM4250, SM8150, SA8155 and SM8550.
Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver.
Support for SM8550 and SM4250 ARC regulators are added to the RPM(h)
power-domain drivers. SM8550 support is added to the LLCC driver.
The AOSS QMP binding is declared compatible for SM8550.
BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built
properly.
-----BEGIN PGP SIGNATURE-----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=MwgS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=u7Q7
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for 6.2
Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115,
SM4250, SM8150, SA8155 and SM8550.
Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver.
Support for SM8550 and SM4250 ARC regulators are added to the RPM(h)
power-domain drivers. SM8550 support is added to the LLCC driver.
The AOSS QMP binding is declared compatible for SM8550.
BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built
properly.
* tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
soc: qcom: Select REMAP_MMIO for LLCC driver
soc: qcom: rpmpd: Add SM4250 support
dt-bindings: power: rpmpd: Add SM4250 support
dt-bindings: soc: qcom: aoss: Add compatible for SM8550
soc: qcom: llcc: Add configuration data for SM8550
dt-bindings: arm: msm: Add LLCC compatible for SM8550
soc: qcom: llcc: Add v4.1 HW version support
soc: qcom: socinfo: Add SM8550 ID
soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
soc: qcom: rpmhpd: Add SM8550 power domains
dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
Link: https://lore.kernel.org/r/20221207154134.3233779-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add compatible and constants for the power domains exposed by the
SM4250 RPM.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221127112204.1486337-2-bhupesh.sharma@linaro.org
Add compatible and constants for the power domains exposed by the RPMH
in the Qualcomm SM8550 platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116111745.2633074-2-abel.vesa@linaro.org
Document the identifier of MSM8956/76.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111120156.48040-7-angelogioacchino.delregno@collabora.com
Add device tree bindings for global clock controller on SM8550 SoCs.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130112852.2977816-2-abel.vesa@linaro.org
