So that it can get rid of requirement of a compiler.
$ sudo ./perf test -v 109
109: Test data symbol :
--- start ---
test child forked, pid 844526
Recording workload...
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.354 MB /tmp/__perf_test.perf.data.GFeZO (4847 samples) ]
Cleaning up files...
test child finished with 0
---- end ----
Test data symbol: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The datasym workload is to check if perf mem command gets the data
addresses precisely. This is needed for data symbol test.
$ perf test -w datasym
I had to keep the buf1 in the data section, otherwise it could end
up in the BSS and was mmaped as a separate //anon region, then it
was not symbolized at all. It needs to be fixed separately.
Committer notes:
Add a -U _FORTIFY_SOURCE to the datasym CFLAGS, as the main perf flags
set it and it requires building with optimization, and this new test has
a -O0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler. Also rename the
symbols to match with the perf test workload.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Acked-by: German Gomez <german.gomez@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The brstack is to run different kinds of branches repeatedly. This is
necessary for brstack test case to verify if it has correct branch info.
$ perf test -w brstack
I renamed the internal functions to have brstack_ prefix as it's too
generic name.
Add a -U_FORTIFY_SOURCE to the brstack CFLAGS, as the main perf flags
set it and it requires building with optimization, and this new test has
a -O0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler. I've also removed
killall as it'll kill perf process now and run the test workload for 10
sec instead.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sqrtloop creates a child process to run an infinite loop calling
sqrt() with rand(). This is needed for ARM SPE fork test.
$ perf test -w sqrtloop
It can take an optional argument to specify how long it will run in
seconds (default: 1).
Committer notes:
Explicitely ignored the sqrt() return to fix the build on systems where
the compiler complains it isn't being used.
And added a sqrtloop specific CFLAGS to disable optimizations to make
this a bit more robust wrt dead code elimination.
Doing that a -U_FORTIFY_SOURCE needs to be added, as -O0 is incompatible
with it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The leafloop workload is to run an infinite loop in the test_leaf
function. This is needed for the ARM fp callgraph test to verify if it
gets the correct callchains.
$ perf test -w leafloop
Committer notes:
Add a:
-U_FORTIFY_SOURCE
to the leafloop CFLAGS as the main perf flags set it and it requires
building with optimization, and this new test has a -O0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirements for a compiler.
$ sudo ./perf test -v 92
92: perf record tests :
--- start ---
test child forked, pid 740204
Basic --per-thread mode test
Basic --per-thread mode test [Success]
Register capture test
Register capture test [Success]
Basic --system-wide mode test
Basic --system-wide mode test [Success]
Basic target workload test
Basic target workload test [Success]
test child finished with 0
---- end ----
perf record tests: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The thloop is similar to noploop but runs in two threads. This is
needed to verify perf record --per-thread to handle multi-threaded
programs properly.
$ perf test -w thloop
It also takes an optional argument to specify runtime in seconds
(default: 1).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler.
Also define and use more local symbols to ease future changes.
$ sudo ./perf test -v pipe
87: perf pipe recording and injection test :
--- start ---
test child forked, pid 748003
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
748014 748014 -1 |perf
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
99.83% perf perf [.] noploop
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
99.85% perf perf [.] noploop
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.160 MB /tmp/perf.data.2XYPdw (4007 samples) ]
99.83% perf perf [.] noploop
test child finished with 0
---- end ----
perf pipe recording and injection test: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -w/--workload option is to run a simple workload used by testing.
This adds a basic framework to run the workloads and 'noploop' workload
as an example.
$ perf test -w noploop
The noploop does a loop doing nothing (NOP) for a second by default.
It can have an optional argument to specify the time in seconds.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use public API when possible, don't include internal API in header
files in evsel.h. Fix any related breakages.
Committer note:
There was one missing case, when building for arm64:
arch/arm64/util/pmu.c: In function 'pmu_events_table__find':
arch/arm64/util/pmu.c:18:30: error: invalid use of undefined type 'struct perf_cpu_map'
18 | if (pmu->cpus->nr != cpu__max_cpu().cpu)
| ^~
Fix it by adding one more exception, including <internal/cpumap.h>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove unnecessary include of internal threadmap.h and refcount.h in
thread_map.h. Switch to using public APIs when possible or including
the internal header file in the C file. Fix a transitive dependency in
openat-syscall.c broken by the clean up.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hashmap.h comes from libbpf but isn't installed with its
headers. Always use the header file of the code in util. Change the
hashmap.h dependency in expr.h to a forward declaration, add the
necessary header file includes in the C files.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221109184914.1357295-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support live monitoring of kernel lock contention without BPF,
it should support something like below:
# perf lock record -a -o- sleep 1 | perf lock contention -i-
contended total wait max wait avg wait type caller
2 10.27 us 6.17 us 5.13 us spinlock load_balance+0xc03
1 5.29 us 5.29 us 5.29 us rwlock:W ep_scan_ready_list+0x54
1 4.12 us 4.12 us 4.12 us spinlock smpboot_thread_fn+0x116
1 3.28 us 3.28 us 3.28 us mutex pipe_read+0x50
To do that, it needs to handle HEAD_ATTR, HEADER_EVENT_UPDATE and
HEADER_TRACING_DATA which are generated only for the pipe mode.
And setting event handler also should be delayed until it gets the
event information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221104051440.220989-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An update for libbpf's hashmap interface from void* -> void* to a
polymorphic one, allowing both long and void* keys and values.
This simplifies many use cases in libbpf as hashmaps there are mostly
integer to integer.
Perf copies hashmap implementation from libbpf and has to be
updated as well.
Changes to libbpf, selftests/bpf and perf are packed as a single
commit to avoid compilation issues with any future bisect.
Polymorphic interface is acheived by hiding hashmap interface
functions behind auxiliary macros that take care of necessary
type casts, for example:
#define hashmap_cast_ptr(p) \
({ \
_Static_assert((p) == NULL || sizeof(*(p)) == sizeof(long),\
#p " pointee should be a long-sized integer or a pointer"); \
(long *)(p); \
})
bool hashmap_find(const struct hashmap *map, long key, long *value);
#define hashmap__find(map, key, value) \
hashmap_find((map), (long)(key), hashmap_cast_ptr(value))
- hashmap__find macro casts key and value parameters to long
and long* respectively
- hashmap_cast_ptr ensures that value pointer points to a memory
of appropriate size.
This hack was suggested by Andrii Nakryiko in [1].
This is a follow up for [2].
[1] https://lore.kernel.org/bpf/CAEf4BzZ8KFneEJxFAaNCCFPGqp20hSpS2aCj76uRk3-qZUH5xg@mail.gmail.com/
[2] https://lore.kernel.org/bpf/af1facf9-7bc8-8a3d-0db4-7b3f333589a2@meta.com/T/#m65b28f1d6d969fcd318b556db6a3ad499a42607d
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221109142611.879983-2-eddyz87@gmail.com
Commit f4a2aade68 ("perf tests powerpc: Fix branch stack sampling
test to include sanity check for branch filter") added a skip if certain
branch options aren't available.
But the change added both -b (--branch-any) and --branch-filter options
at the same time, which will always result in a failure on any platform
because the arguments can't be used together.
Fix this by removing -b (--branch-any) and leaving --branch-filter which
already specifies 'any'. Also add warning messages to the test and perf
tool.
Output on x86 before this fix:
$ sudo ./perf test branch
108: Check branch stack sampling : Skip
After:
$ sudo ./perf test branch
108: Check branch stack sampling : Ok
Fixes: f4a2aade68 ("perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman.Khandual@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221028121913.745307-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Skip an event configuration for event names with a dash/minus in them.
Events with a dash/minus in their name cause parsing issues as legacy
encoding of events would use a dash/minus as a separator.
The parser separates events with dashes into prefixes and suffixes and
then recombines them. Unfortunately if an event has part of its name
that matches a legacy token then the recombining fails.
This is seen for branch-brs where branch is a legacy token. branch-brs
was introduced to sysfs in:
https://lore.kernel.org/all/20220322221517.2510440-5-eranian@google.com/
The failure is shown below as well as the workaround to use a config
where the dash/minus isn't treated specially:
```
$ perf stat -e branch-brs true
event syntax error: 'branch-brs'
\___ parser error
$ perf stat -e cpu/branch-brs/ true
Performance counter stats for 'true':
46,179 cpu/branch-brs/
```
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20221013011205.3151391-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It uses things like perf_event__name() but were not including event.h,
where its prototype lives, fix it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some places were including event.h just to get 'struct perf_sample',
move it to a separate place so that we speed up a bit the build.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It now has 4 sub tests and at least one of them should run.
But once the TEST_SKIP (= 2) return value is set, it won't be
overwritten unless there's a failure. I think we should return success
when one or more tests are skipped but the remaining subtests are
passed.
So update the test code not to set the err variable when it skips
the test.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --threads option changed the 'perf record' behavior significantly,
so it'd be nice if we test it separately. Add --threads options with
different argument in each test supported and check the result.
Also update the cleanup routine because threads recording produces data
in a directory.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a subtest which profiles the given workload on the command line.
As it's a minimal requirement, the test should run ok so it doesn't skip
the test even if it failed to run the 'perf record' command.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add system wide recording test with the same pattern. It'd skip the
test when it fails to run 'perf record'.
For system-wide mode, it needs to avoid build-id collection and
synthesis because the test only cares about the test program and kernel
would generate the necessary events as the process starts.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just running the target program is not enough to test multi-thread
target because it'd be racy perf vs target startup. I used the
initial delay but it cannot guarantee for perf to see the thread.
Instead, use wait_for_threads helper from shell/lib/waiting.sh to make
sure it starts the sibling thread first. Then perf record can use -p
option to profile the target process.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the system has cc it could build a test program with two threads
and then use it for more detailed testing. Also it accepts an option
to run a thread forever to ensure multi-thread runs.
If cc is not found, it falls back to use the default value 'true'.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Basically there are 3 issues:
1. quote shell expansion
2. do not use egrep
3. use upper case letters for signal names
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I think it's to support non-root user tests. But perf record can handle
the case and fall back to a software event (cpu-clock). Practically this
would affect when it's run on a VM, but it seems no reason to prevent running
the test in the guest.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_stat_config.aggr_map should have a correct size of the
aggregation map. Use it to allocate aggr_counts.
Also AGGR_NONE with per-core events can be tricky because it doesn't
aggreate basically but it needs to do so for per-core events only.
So only per-core evsels will have stats->aggr data.
Note that other caller of evlist__alloc_stat() might not have
stat_config or aggr_map.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221018020227.85905-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The virtual LBR test uses a python script to check the max size of
branch stack in the Intel-PT generated LBR. But it didn't check whether
python scripting is available (as it's optional).
Let's skip the test if the python support is not available.
Fixes: f77811a0f6 ("perf test: test_intel_pt.sh: Add 9 tests")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ammy Yi <ammy.yi@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221021181055.60183-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Testcase stat+json_output.sh fails in powerpc:
86: perf stat JSON output linter : FAILED!
The testcase "stat+json_output.sh" verifies perf stat JSON output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 0c343af2a2 ("perf test: JSON format checking")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221006155149.67205-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Testcase stat+csv_output.sh fails in powerpc:
84: perf stat CSV output linter: FAILED!
The testcase "stat+csv_output.sh" verifies perf stat CSV output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 7473ee56db ("perf test: Add checking for perf stat CSV output.")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221006155149.67205-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since PERF_FORMAT_LOST was added, the default read format has that bit
set, so add it to the tests. Keep the old value as well so that the test
still passes on older kernels.
This fixes the following failure:
expected read_format=0|4, got 20
FAILED './tests/attr/test-record-C0' - match failure
Fixes: 85b425f31c8866e0 ("perf record: Set PERF_FORMAT_LOST by default")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221012094633.21669-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add tests:
Test with MTC and TSC disabled
Test with branches disabled
Test with/without CYC
Test recording with sample mode
Test with kernel trace
Test virtual LBR
Test power events
Test with TNT packets disabled
Test with event_trace
These tests mostly check that perf record works with the corresponding
Intel PT config terms, sometimes also checking that certain packets do or
do not appear in the resulting trace as appropriate.
The "Test virtual LBR" is slightly trickier, using a Python script to
check that branch stacks are actually synthesized.
Signed-off-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-8-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for decoding self-modifying code using a jitdump file.
The test creates a workload that uses self-modifying code and generates its
own jitdump file. The result is processed with perf inject --jit and
checked for decoding errors.
Note the test will fail without patch "perf inject: Fix GEN_ELF_TEXT_OFFSET
for jit" applied.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tidy alignment of test function lines to make them more readable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Messages display with the perf test -v option. Add a message to show when
skipping a test because the user cannot do kernel tracing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When not decoding, the options "-B -N --no-bpf-event" speed up perf record.
Make a common function for them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
count_result() does not always reset ret=0 which means the value can spill
into the next test result.
Fix by explicitly setting it to zero between tests.
Committer testing:
# perf test "Miscellaneous Intel PT testing"
110: Miscellaneous Intel PT testing : Ok
#
Tested as well with:
# perf test -v "Miscellaneous Intel PT testing"
Fixes: fd9b45e39c ("perf test: test_intel_pt.sh: Fix return checking")
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test commonly fails on Arm Juno because the instruction interval
is large enough to miss generating any samples for Perf in system-wide
mode.
Fix this by lowering the interval until a comfortable number of Perf
instructions are generated. The test is still quick to run because only
a small amount of trace is gathered.
Before:
sudo ./perf test coresight -vvv
...
Recording trace with system wide mode
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
CoreSight system wide testing: FAIL
...
After:
sudo ./perf test coresight -vvv
...
Recording trace with system wide mode
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
CoreSight system wide testing: PASS
...
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20221005140508.1537277-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds scripts to drive the unroll thread tests to compare perf
output against a minimum bar of content/quality.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-12-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test tool to be driven by further test scripts. This is a simple C
based test that is for arm64 with some inline ASM to manually unroll a
lot of code to have a very long sequence of commands.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-11-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a script to drive the thread loop test that gathers data so
it passes a minimum bar (in this case do we get any perf context data
for every thread).
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-10-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test tool to be driven by further test scripts. This is a simple C
based loop with threads test to drive from scripts that can output TIDs
for tracking/checking.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-9-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a script to drive the threaded memcpy test that gathers data so it
passes a minimum bar for amount and quality of content that we extract
from the kernel's perf support.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-8-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test tool to be driven by further test scripts. This is a simple C
based memcpy with threads test to drive from scripts.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-7-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a script to drive the asm pureloop test for arm64/CoreSight that
gathers data so it passes a minimum bar for amount and quality of
content that we extract from the kernel's perf support.
Committer notes:
Add the install of tests/shell/coresight/*.sh to
tools/perf/Makefile.perf as we're starting to populate that dir.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-5-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
