This reverts commit 2eee0229f6.
Fallback to a stable base until we have a correct new one
Signed-off-by:Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issue:
originally we kickoff IB test asynchronously with driver's
init, thus
the IB test may still running when the driver loading
done (modprobe amdgpu done).
if we shutdown VM immediately after amdgpu driver
loaded then GPU may
hang because the IB test is still running
fix:
flush the delayed_init routine at the bottom of device_init
to avoid driver loading done prior to the IB test completes
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The legacy way to initialize discovery_tmr_size
is using DISCOVERY_TMR_SIZE, while after we reduce
DISCOVERY_TMR_SIZE from 64KB to 4KB, variable
discovery_tmr_size is also reduced to 4KB, this is not
correct, it still should be 64KB, discovery_tmr_size
will be used to calculate ip_discovery reserved mem's
start address and size.
Using DISCOVERY_TMR_OFFSET to init discovery_tmr_size instead.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only read first 4K data instead of whole TMR block,
so we can reduce the time in full access mode.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After we move request full access before set
ip blocks, we can merge atombios init block
of SRIOV and baremetal together.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From SIENNA_CICHLID, HW introduce a new protection
feature which can control the FB, doorbell and MMIO
write access for VF, so guest driver should request
full access before ip discovery, or we couldn't access
ip discovery data in FB.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Init soc15 reg base early enough so we can touch
mailbox related registers in request full access
for sriov before set_ip_blocks, vi&nv arch doesn't
use reg base in virt ops.
v2: fix reg_base_init missed in bare metal case.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move request init data to virt detection func, so we
can insert request full access between request init data
and set ip blocks.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When there is no graphics support, KFD can use more of the VMIDs. Graphics
VMIDs are only used for video decoding/encoding and post processing. With
two VCE engines, there is no reason to reserve more than 2 VMIDs for that.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFD VMID assignment was hard-coded in a few places. Consolidate that in
a single variable adev->vm_manager.first_kfd_vmid. The value is still
assigned in gmc-ip-version-specific code.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port functionality from the Radeon driver to support
UVD and VCE power management.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port functionality from the Radeon driver to support
VCE clock control.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port functionality from the Radeon driver to support
UVD clock control.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.9-2020-07-01:
amdgpu:
- DC DMUB updates
- HDCP fixes
- Thermal interrupt fixes
- Add initial support for Sienna Cichlid GPU
- Add support for unique id on Arcturus
- Major swSMU code cleanup
- Skip BAR resizing if the bios already did id
- Fixes for DCN bandwidth calculations
- Runtime PM reference count fixes
- Add initial UVD support for SI
- Add support for ASSR on eDP links
- Lots of misc fixes and cleanups
- Enable runtime PM on vega10 boards that support BACO
- RAS fixes
- SR-IOV fixes
- Use IP discovery table on renoir
- DC stream synchronization fixes
amdkfd:
- Track SDMA usage per process
- Fix GCC10 compiler warnings
- Locking fix
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
UAPI:
- Update comments to clarify MTYPE
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701155041.1102829-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Large clock values may overflow and show up as negative.
Reported by prOMiNd on IRC.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Renoir uses integrated_system_info table v12. The table
has the same layout as v11 with respect to this data. Just
reuse the existing code for v12 for stable.
Fixes incorrectly reported vram info in the driver output.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The failures with ROCm only happen with noretry=1, so
enable runtime pm when noretry=0 (the current default).
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a switch statement to simplify asic checks. Note
that BACO is not supported on APUs, so there is no
need to check them.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The release_firmware() function is NULL tolerant so we do not need
to check for NULL param before calling it.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the cases where adev->jpeg.num_jpeg_inst is zero or the condition
adev->jpeg.harvest_config & (1 << i) is always non-zero the variable
ret is never set to an error condition and the function returns
an uninitialized value in ret. Since the only exit condition at
the end if the function is a success then explicitly return
0 rather than a potentially uninitialized value in ret.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 14f43e8f88 ("drm/amdgpu: move JPEG2.5 out from VCN2.5")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This includes older APUs like renoir.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement SI UVD. The SI UVD firmware requires validation.
v2: squash in missing brace fix (Colin Ian King)
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For implement UVD on SI asic, add Oland, Pitcairn, Verde, Tahiti firmwares.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drop the duplicate register macros from sid.h and use the
standard ones in the oss register headers.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SOC15_WAIT_ON_RREG's return value needn't always been handled by
caller. new design is to fix this kind of unused variable.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Navi12 platform, node power_dpm_force_performance_level
doesn't work correctly in one-VF mode with at least three
smu messages not supported:
SMU_MSG_SetSoftMaxByFreq
SMU_MSG_SetSoftMinByFreq
SMU_MSG_TransferTableDram2Smu
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support for setting up XGMI FB address regions
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the module parameter sched_hw_submission is probably from user mode,
and the kernel need to check whether it is legal.
1. align hw sched jobs to power of 2 and set minimum number is 2.
2. use kernel api is_power_of_2() to simplify driver code.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused amdgpu_xgmi_hive_try_lock() and smu7_reset_asic_tasks().
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file vcn_v2_0.h
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file vcn_v1_0.h
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used sparse(make C=1) to find these loose ends.
v2:
removed unwanted extra line
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file jpeg_v2_0.h.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file jpeg_v1_0.h.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix memory leak in amdgpu_debugfs_gpr_read not freeing data when
amdgpu_virt_enable_access_debugfs failed.
Fixes: 95a2f91738 ("drm/amdgpu: restrict debugfs register access under SR-IOV")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix memory leak in amdgpu_debugfs_gpr_read not freeing data when
pm_runtime_get_sync failed.
Fixes: a9ffe2a983 ("drm/amdgpu/debugfs: properly handle runtime pm")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: c422a628925d ("drm/amdgpu: rename macro for VCN2.0 2.5 and 3.0")
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes below warning:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_reset_perfmon_cntr’:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:571:2: warning: ‘hi_base_addr’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
571 | df_v3_6_perfmon_wreg(adev, lo_base_addr, 0, hi_base_addr, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to Marek a pipeline sync should be inserted for implicit syncs well.
v2: bump the driver version
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
