[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
[How]
Defer the initialization of num_types to eliminate the error logs.
Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will let us pass the kms_hdr.bpc_switch IGT
test.
The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.
Starting with this patch the issue is fixed:
commit cbd14ae7ea ("drm/amd/display: Fix
incorrectly pruned modes with deep color")
This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.
v2:
- explain why this is no longer needed (Michel)
- refer to commit that fixed bpc fallback (Michel)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The parent for the backlight device should be the drm-connector object,
not the PCI device.
Userspace relies on this to be able to detect which backlight class device
to use on hybrid gfx devices where there may be multiple native (raw)
backlight devices registered.
Specifically gnome-settings-daemon expects the parent device to have
an "enabled" sysfs attribute (as drm_connector devices do) and tests
that this returns "enabled" when read.
This aligns the parent of the backlight device with i915, nouveau, radeon.
Note that drivers/gpu/drm/amd/amdgpu/atombios_encoders.c also already
uses the drm_connector as parent, only amdgpu_dm.c used the PCI device
as parent before this change.
Note this is marked as a RFC because I don't have hw to test, so this
has only been compile tested! If someone can test this on actual
hw which hits the changed code path that would be great.
Link: https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/issues/730
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Contains fixes for DP MST and the panel orientation on an Lenovo
IdeaPad model.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPuB6cACgkQaA3BHVML
eiNrgwf+Of4L65lpUbMtqfXygfIvy++rzMJuB06+ccmXA3j/QLiAftLVEEtwJpfm
9nn3Fmu0tBE9i3ULkiVUDOizP76EjNXewWSfPl730NJ1+Y6/h0/ljdCeQDNLxts7
QkZkm7FgIldP2rNN4P84VMz60A6m8B8C60N64+ucFdNtd7+67jhLdwHpP1/gwkKS
idwMGcfVfV37PnSUCdXvfYUWpKZZ1xiUkR+0twjWR//8pEEekSRBsiF3l/gyJqK0
u80myF4ph+yvfdLuerFFqHdVtSVzSiCcziuiIMdn5t5d03MxVlD6C/pCfExbwBmi
D0VthHzn215rRdOlaApLL9FlzbvnhA==
=g76M
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2023-02-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
Contains fixes for DP MST and the panel orientation on an Lenovo
IdeaPad model.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y+4H4C4E6cZcM9+J@linux-uq9g
[Why&How]
Temporarily disable SubVP+DRR since Xorg has an architectural limitation
where freesync will not work in a multi monitor configuration. SubVP+DRR
requires that freesync be working.
Whether OS has variable refresh setting enabled or not, the state on
the crtc remains same unless an application requests VRR. Due to this,
there is no way to know whether freesync will actually work or not
while we are on the desktop from the kernel's perspective.
If userspace does not have a limitation with multi-display freesync (for
example wayland), then this feature can be enabled by adding a
dcfeaturemask option to amdgpu on the kernel cmdline like:
amdgpu.dcfeaturemask=0x200
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_atomic_normalize_zpos() can return an error code when there's
modeset lock contention. This was being ignored.
[How]
Bail out of atomic check if normalize_zpos() returns an error.
Fixes: b261509952 ("drm/amd/display: Fix double cursor on non-video RGB MPO")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We only allowed 1 overlay plane. But now some ASICS can support multiple
overlay planes.
[How]
Use max_slave_planes as the number of overlays we can support.
Also since we cannot draw cursor over a video plane, we need to make
sure that we reject commits where the topmost plane is a video plane
(overlay only).
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dmub will cache the video position data during PSR-SU enable.
The dmub will use an outdated MPO video position if user try
to drag the video window and it will cause video glitch.
[How]
Disable the PSR-SU temporarily while user drag the video window.
The PSR-SU will be re-enabled after the video window is stable.
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
A recent change was made to implement temporary workaround due DRM
update in MST interfaces. The workaround is added into our generic
deallocation MST sequence.
This ticket is to extract this temporary workaround into its own function so
it is differentiated from our generic sequence.
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Atm, drm_dp_remove_payload() uses the same payload state to both get the
vc_start_slot required for the payload removal DPCD message and to
deduct time_slots from vc_start_slot of all payloads after the one being
removed.
The above isn't always correct, as vc_start_slot must be the up-to-date
version contained in the new payload state, but time_slots must be the
one used when the payload was previously added, contained in the old
payload state. The new payload's time_slots can change vs. the old one
if the current atomic commit changes the corresponding mode.
This patch let's drivers pass the old and new payload states to
drm_dp_remove_payload(), but keeps these the same for now in all drivers
not to change the behavior. A follow-up i915 patch will pass in that
driver the correct old and new states to the function.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org # 6.1
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230206114856.2665066-2-imre.deak@intel.com
This reverts commit 3cc67fe1b3.
Some users have reported flickerng with S/G display. We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to. We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
We have a parameter to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further. Having this enabled
seems like the lesser of to evils.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 2404f9b0ea.
Some users have reported flickerng with S/G display. We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to. We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
We have a parameter to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further. Having this enabled
seems like the lesser of to evils.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f081cd4ca2.
Some users have reported flickerng with S/G display. We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to. We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
We have a parameter to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further. Having this enabled
seems like the lesser of to evils.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some users have reported flickerng with S/G display. We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to. We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
Add a option to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further.
v2: fix typo
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use fb_start/end for consistency with gmc code for non-
XGMI systems, they are equivalent to vram_start/end.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As made mention of in commit 4ea7fc0953 ("drm/amd/display: Do not
program interrupt status on disabled crtc"), we shouldn't program
disabled crtcs. So, filter out disabled crtcs in dm_set_vupdate_irq()
and dm_set_vblank().
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 589d273933 ("drm/amd/display: Use crtc enable/disable_vblank hooks")
Fixes: d2574c33bb ("drm/amd/display: In VRR mode, do DRM core vblank handling at end of vblank. (v2)")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove CONFI_BACKLIGHT_CLASS_DEVICE ifdef
that was accidently introduced back.
Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dc_link contains over 30k line of code, the decision is to break it
down to files residing in link folder based on functionality. This
change is the last break down change which will remove dc_link.c
file after everything is broken down.
[how]
Move remaining dc_link.c functions into link_detection, link_dpms,
link_validation, link_resource, and link_fpga and remove dc_link.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, it is likely that we will read the relevant LTTPR caps after
link training has completed (which can cause garbage data to be read),
however according to the DP 2.0 spec that should be done before link
training has commenced. So, instead of reading the registers on demand,
use the values provided to us by DC.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 9aa1537081.
This is fixed now so we can re-enable S/G display on DCN
3.1.4.
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Take into account whether or not the AGP aperture is
enabled or not when calculating the system aperture.
Fixes white screens with DCN 3.1.4.
Based on a patch from Yifan Zhang <yifan1.zhang@amd.com>
Cc: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a very trivial code clean-up related to commit 5468c36d62
("drm/amd/display: Filter Invalid 420 Modes for HDMI TMDS"). This commit
added a validation on driver probe to prevent invalid TMDS modes, but one
of the fake properties (swizzle) ended-up causing a warning on driver
probe; was reported here: https://gitlab.freedesktop.org/drm/amd/-/issues/2264.
It was fixed by commit a1cbe6916f ("drm/amd/display: patch cases with
unknown plane state to prevent warning"), but the validation code had
a double variable assignment, which we hereby remove. Also, the fix relies
in the dcn2{0,1}patch_unknown_plane_state() callbacks, so while at it we
took the opportunity to perform a small code clean-up in such routines.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Mark Broadworth <mark.broadworth@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sung Joon Kim <Sungjoon.Kim@amd.com>
Cc: Swapnil Patel <Swapnil.Patel@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There could be boards with DCN listed in IP discovery, but no
display hardware actually wired up. In this case the vbios
display table will not be populated. Detect this case and
skip loading DM when we detect it.
v2: Mark DCN as harvested as well so other display checks
elsewhere in the driver are handled properly.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
linux amdgpu defer handle link lost irq. dm add handle
request to irq work queue for the first irq of link lost.
if link training fails for link lost handle, link will not
be enabled anymore.
[How]
allow adding handle request of link lost to work queue
before running dp link training for link lost.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add log for MST/PCON specific use case:
1. If DP1.2 hub where gives reduced link bw and no dsc support.
2. If less than 4-lane configuration where gives reduced bw.
3. If FRL PCON enabled for asic.
4. Track MST sink count.
Reviewed-by: Hersen Wu <Hersenxs.Wu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Enable Freesync over PCon on Linux environment.
[how]
Adding Freesync over PCon support in amdgpu_dm
- Read DPCD for Freesync over PCon capabilitiy
- Add whitelist for compatible branch devices
Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes the build here locally on my 32-bit arm build.
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit f439a959dc)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Switching between certain modes that are freesync video modes and those
are not freesync video modes result in timing not changing as seen by
the monitor due to incorrect timing being driven.
The issue is fixed by ensuring that when a non freesync video mode is
set, we reset the freesync status on the crtc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Connecting displays to TBT3 docks often produces invalid
replies for DPIA AUX requests. It turns out the completion
structure was not re-initialized before reusing it, resulting
in immature wake up to completion.
[How]
Properly call reinit_completion() on reused completion structure.
Cc: stable@vger.kernel.org
Reviewed-by: Solomon Chiu <solomon.chiu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When DSC is enabled, the PSRSU seletive update region
must be multiple number of DSC slice height number.
The original solution is to overwrite the SU Y granularity
by DSC slice height in DAL driver. However, the size
of the SU Y granularity variable only has 8 bytes
and the DSC slice height may over the 8 bytes size.
[How]
Instead of overwriting the SU Y granularity value,
add a new DSC slice height pararmeter and pass it
to DMUB PSRSU FW. The PSRSU FW will refer to the
DSC slice height value and extend the SU region.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Temporarly merge dc_link_dp functions into dc_link for the
purpose of removing dc_link_dp files. This is a transitional
change for later commits where we will further refactor dc_link
file.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create new files link_dp_irq_handler.c and link_dp_irq_handler.h, and
move DP irq handler functions into them.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
link component contains three sub folders:
accessories - utilities for improving testability, logging or tracing, doesn't impact
end user use cases.
protocols - specs defined protocols used in end user use cases
hwss - hwss owned link_hwss object, served as an abstraction layer in hwss to
access various types of encoder/phy/dpia endpoints in a unified interface.
sooner we will have files directly under link folder one for the implementation of
each major link behavior such as link_create, link_detect, link_validate
and link_set_dpms.
Reviewed-by: George Shen <George.Shen@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
After enabling S/G on dcn314 a screen corruption may be observed.
HostVM flag should be set in S/G mode to be included in DML calculations.
[How]
In S/G mode gpu_vm_support flag is set.
Use its value to init is_hvm_enabled.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
adjust the coding in dm_helpers_dp_mst_send_payload_allocation()
for reading easily.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
The term (i.e. port & mst_port) that we used to use in amdgpu is a bit
confusing. Rename them to mst_output_port & mst_root respectively.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu expects to update payload table for one stream one time
by calling dm_helpers_dp_mst_write_payload_allocation_table().
Currently, it get modified to try to update HW payload table
at once by referring mst_state.
[How]
This is just a quick workaround. Should find way to remove the
temporary struct dc_dp_mst_stream_allocation_table later if set
struct link_mst_stream_allocatio directly is possible.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc40 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like I made a pretty big mistake here without noticing: it seems when
I moved the assignments of mst_state->pbn_div I completely missed the fact
that the reason for us calling drm_dp_mst_update_slots() earlier was to
account for the fact that we need to call this function using info from the
root MST connector, instead of just trying to do this from each MST
encoder's atomic check function. Otherwise, we end up filling out all of
DC's link information with zeroes.
So, let's restore that and hopefully fix this DSC regression.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc40 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&how]
There are cases where VRR is possible but not enabled. If allow_freesync
parameter is not set, SubVP logic defaults to checking only the ignore MSA
parameter that is always set if display is DRR capable, which breaks the system
while trying to enable SubVP on multi monitor configs where freesync
does not work due to Xorg limitation.
SubVP uses allow_freesync parameter to check if SubVP + DRR case can be executed.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 6ffa679916.
This commit introduced a regression in Unigine Heaven benchmark where
the display would turn off due to incorrect handling of the parameter to
ignore MSA packets.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
All calls into DC must be guarded by dc_lock because DC code
is not safe against multi-thread or re-entry.
[How]
Hold dc_lock when calling DC interfaces to parse Freesync HDMI.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During DP DSC compliance tests, bpc requested would
change between sub-tests, which requires stream
to be recommited.
[How]
Force connector to disconnect and reconnect whenever
there is a bpc change in automated test.
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.
Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
