This is useful for getting debug information out in certain
situations, such as failing kernel selftests and CI runs that don't
log error captures. It is especially useful for things like retrieving
GuC logs as GuC operation can't be tracked by adding printk or ftrace
entries.
v2: Add CONFIG_DRM_I915_DEBUG_GEM wrapper (review feedback by Rodrigo).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418181744.3251240-2-John.C.Harrison@Intel.com
Currently the KMD is using enum i915_cache_level to set caching policy for
buffer objects. This is flaky because the PAT index which really controls
the caching behavior in PTE has far more levels than what's defined in the
enum. In addition, the PAT index is platform dependent, having to translate
between i915_cache_level and PAT index is not reliable, and makes the code
more complicated.
From UMD's perspective there is also a necessity to set caching policy for
performance fine tuning. It's much easier for the UMD to directly use PAT
index because the behavior of each PAT index is clearly defined in Bspec.
Having the abstracted i915_cache_level sitting in between would only cause
more ambiguity. PAT is expected to work much like MOCS already works today,
and by design userspace is expected to select the index that exactly
matches the desired behavior described in the hardware specification.
For these reasons this patch replaces i915_cache_level with PAT index. Also
note, the cache_level is not completely removed yet, because the KMD still
has the need of creating buffer objects with simple cache settings such as
cached, uncached, or writethrough. For kernel objects, cache_level is used
for simplicity and backward compatibility. For Pre-gen12 platforms PAT can
have 1:1 mapping to i915_cache_level, so these two are interchangeable. see
the use of LEGACY_CACHELEVEL.
One consequence of this change is that gen8_pte_encode is no longer working
for gen12 platforms due to the fact that gen12 platforms has different PAT
definitions. In the meantime the mtl_pte_encode introduced specfically for
MTL becomes generic for all gen12 platforms. This patch renames the MTL
PTE encode function into gen12_pte_encode and apply it to all gen12. Even
though this change looks unrelated, but separating them would temporarily
break gen12 PTE encoding, thus squash them in one patch.
Special note: this patch changes the way caching behavior is controlled in
the sense that some objects are left to be managed by userspace. For such
objects we need to be careful not to change the userspace settings.There
are kerneldoc and comments added around obj->cache_coherent, cache_dirty,
and how to bypass the checkings by i915_gem_object_has_cache_level. For
full understanding, these changes need to be looked at together with the
two follow-up patches, one disables the {set|get}_caching ioctl's and the
other adds set_pat extension to the GEM_CREATE uAPI.
Bspec: 63019
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230509165200.1740-3-fei.yang@intel.com
GuC based register dumps in error capture logs were basically broken
for virtual engines. This can be seen in igt@gem_exec_balancer@hang:
[IGT] gem_exec_balancer: starting subtest hang
[drm] GPU HANG: ecode 12:4:e1524110, in gem_exec_balanc [6388]
[drm] GT0: GUC: No register capture node found for 0x1005 / 0xFEDC311D
[drm] GPU HANG: ecode 12:4:00000000, in gem_exec_balanc [6388]
[IGT] gem_exec_balancer: exiting, ret=0
The test causes a hang on both engines of a virtual engine context.
The engine instance zero hang gets a valid error capture but the
non-instance-zero hang does not.
Fix that by scanning through the list of pending register captures
when a hang notification for a virtual engine is received. That way,
the hang can be assigned to the correct physical engine prior to
starting the error capture process. So later on, when the error capture
handler tries to find the engine register list, it looks for one on
the correct engine.
Also, sneak in a missing blank line before a comment in the node
search code.
v2: Fix null pointer deref on non-GuC platforms.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-5-John.C.Harrison@Intel.com
The seqno value actually written out to memory is no longer in the
regular HWSP. Instead, it is now in its own private timeline buffer.
Thus, it is no longer visible in an error capture. So, explicitly read
the value and include that in the capture.
v2: %d -> %u (Alan)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230311063714.570389-4-John.C.Harrison@Intel.com
A hang situation has been observed where the only requests on the
context were either completed or not yet started according to the
breaadcrumbs. However, the register state claimed a batch was (maybe)
in progress. So, allow capture of the pending request on the grounds
that this might be better than nothing.
v2: Reword 'not started' warning message (Tvrtko)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-6-John.C.Harrison@Intel.com
There was a report of error captures occurring without any hung
context being indicated despite the capture being initiated by a 'hung
context notification' from GuC. The problem was not reproducible.
However, it is possible to happen if the context in question has no
active requests. For example, if the hang was in the context switch
itself then the breadcrumb write would have occurred and the KMD would
see an idle context.
In the interests of attempting to provide as much information as
possible about a hang, it seems wise to include the engine info
regardless of whether a request was found or not. As opposed to just
prentending there was no hang at all.
So update the error capture code to always record engine information
if a context is given. Which means updating record_context() to take a
context instead of a request (which it only ever used to find the
context anyway). And split the request agnostic parts of
intel_engine_coredump_add_request() out into a seaprate function.
v2: Remove a duplicate 'if' statement (Umesh) and fix a put of a null
pointer.
v3: Tidy up request locking code flow (Tvrtko)
v4: Pull in improved info message from next patch and fix up potential
leak of GuC register state (Daniele)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> (v2)
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-5-John.C.Harrison@Intel.com
The debugfs dump of requests was confused about what state requires
the execlist lock versus the GuC lock. There was also a bunch of
duplicated messy code between it and the error capture code.
So refactor the hung request search into a re-usable function. And
reduce the span of the execlist state lock to only the execlist
specific code paths. In order to do that, also move the report of hold
count (which is an execlist only concept) from the top level dump
function to the lower level execlist specific function. Also, move the
execlist specific code into the execlist source file.
v2: Rename some functions and move to more appropriate files (Daniele).
v3: Rename new execlist dump function (Daniele)
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-4-John.C.Harrison@Intel.com
When GuC support was added to error capture, the reference counting
around the request object was broken. Fix it up.
The context based search manages the spinlocking around the search
internally. So it needs to grab the reference count internally as
well. The execlist only request based search relies on external
locking, so it needs an external reference count but within the
spinlock not outside it.
The only other caller of the context based search is the code for
dumping engine state to debugfs. That code wasn't previously getting
an explicit reference at all as it does everything while holding the
execlist specific spinlock. So, that needs updaing as well as that
spinlock doesn't help when using GuC submission. Rather than trying to
conditionally get/put depending on submission model, just change it to
always do the get/put.
v2: Explicitly document adding an extra blank line in some dense code
(Andy Shevchenko). Fix multiple potential null pointer derefs in case
of no request found (some spotted by Tvrtko, but there was more!).
Also fix a leaked request in case of !started and another in
__guc_reset_context now that intel_context_find_active_request is
actually reference counting the returned request.
v3: Add a _get suffix to intel_context_find_active_request now that it
grabs a reference (Daniele).
v4: Split the intel_guc_find_hung_context change to a separate patch
and rename intel_context_find_active_request_get to
intel_context_get_active_request (Tvrtko).
v5: s/locking/reference counting/ in commit message (Tvrtko)
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Fixes: 573ba126ae ("drm/i915/guc: Capture error state on context reset")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-3-John.C.Harrison@Intel.com
Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.
Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.
Also some places actually needed i915_irq.h too.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
On Xe_HP the fault registers are now in a multicast register range.
However as part of the GAM these registers follow special rules and we
need only read from the "primary" GAM's instance to get the information
we need. So a single intel_gt_mcr_read_any() (which will automatically
steer to the primary GAM) is sufficient; we don't need to loop over each
instance of the MCR register.
v2:
- Update more instances of fault registers. (Bala)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-7-matthew.d.roper@intel.com
drm/i915 feature pull for v6.1:
Features and functionality:
- Early Meteorlake (MTL) enabling (José, Radhakrishna, Clint, Imre, Vandita, Ville, Jani)
- Support more HDMI pixel clock frequencies on DG2 (Clint)
- Sanity check PCI BARs (Piotr Piórkowski)
- Enable DC5 on DG2 (Anusha)
- DG2 DMC firmware version bump to v2.07 (Madhumitha)
- New ADL-S PCI ID (José)
Refactoring and cleanups:
- Add display sub-struct to struct drm_i915_private (Jani)
- Add initial runtime info to device info (Jani)
- Split out HDCP and backlight registers to separate files (Jani)
Fixes:
- Skip wm/ddb readout for disabled pipes (Ville)
- HDMI port timing quirk for GLK ECS Liva Q2 (Diego Santa Cruz)
- Fix bw init null pointer dereference (Łukasz Bartosik)
- Disable PPS power hook for DP AUX backlight (Jouni)
- Avoid warnings on registering multiple backlight devices (Arun)
- Fix dual-link DSI backlight and CABC ports for display 11+ (Jani)
- Fix Type-C PHY ownership programming in HDMI legacy mode (Imre)
- Fix unclaimed register access while loading PIPEDMC-C/D (Imre)
- Bump up CDCLK for DG2 (Stan)
- Prune modes that require HDMI 2.1 FRL (Ankit)
- Disable FBC when PSR1 is enabled in display 12-13 (Matt)
- Fix TGL+ HDMI transcoder clock and DDI BUF disable order (Imre)
- Disable PSR before disable pipe (José)
- Disable DMC handlers during firmware loading/disabling on display 12+ (Imre)
- Disable clock gating for PIPEDMC-A/B as a workaround (Imre)
Merges:
- Two drm-next backmerges (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k06rfaku.fsf@intel.com
There was a misunderstanding in how firmware file compatibility should
be managed within i915. This has been clarified as:
i915 must support all existing firmware releases forever
new minor firmware releases should replace prior versions
only backwards compatibility breaking releases should be a new file
This patch cleans up the single fallback file support that was added
as a quick fix emergency effort. That is now removed in preference to
supporting arbitrary numbers of firmware files per platform.
The patch also adds support for having GuC firmware files that are
named by major version only (because the major version indicates
backwards breaking changes that affect the KMD) and for having HuC
firmware files with no version number at all (because the KMD has no
interface requirements with the HuC).
For GuC, the driver will report via dmesg if the found file is older than
expected. For HuC, the KMD will no longer require updating for any new
HuC release so will not be able to report what the latest expected
version is.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906230147.479945-1-daniele.ceraolospurio@intel.com
Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.
Since drm-next does not have commit f0c70d41e4 ("drm/i915/guc: remove
runtime info printing from time stamp logging") yet, only
drm-intel-gt-next, will need to do that as part of the merge here to
build.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When debugging GuC communication issues, it is useful to have the CTB
info available. So add the state and buffer contents to the error
capture log.
Also, add a sub-structure for the GuC specific error capture info as
it is now becoming numerous.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-5-John.C.Harrison@Intel.com
It is useful to be able to match GuC events to kernel events when
looking at the GuC log. That requires being able to convert GuC
timestamps to kernel time. So, when dumping error captures and/or GuC
logs, include a stamp in both time zones plus the clock frequency.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728022028.2190627-4-John.C.Harrison@Intel.com
Although all DSS belong to a single pool on Xe_HP platforms (i.e.,
they're not organized into slices from a topology point of view), we do
still need to pass 'group' and 'instance' targets when steering register
accesses to a specific instance of a per-DSS multicast register. The
rules for how to determine group and instance IDs (which previously used
legacy terms "slice" and "subslice") varies by platform. Some platforms
determine steering by gslice membership, some platforms by cslice
membership, and future platforms may have other rules.
Since looping over each DSS and performing steered unicast register
accesses is a relatively common pattern, let's add a dedicated iteration
macro to handle this (and replace the platform-specific "instdone" loop
we were using previously. This will avoid the calling code needing to
figure out the details about how to obtain steering IDs for a specific
DSS.
Most of the places where we use this new loop are in the GPU errorstate
code at the moment, but we do have some additional features coming in
the future that will also need to loop over each DSS and steer some
register accesses accordingly.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701232006.1016135-1-matthew.d.roper@intel.com
Skip capturing any lmem pages that can't be copied using the CPU. This
in now only best effort on platforms that have small BAR.
Testcase: igt@gem-exec-capture@capture-invisible
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629174350.384910-7-matthew.auld@intel.com
For some platfroms we use stop_machine version of
gen8_ggtt_insert_page/gen8_ggtt_insert_entries to avoid a
concurrent GGTT access bug but this causes a circular locking
dependency warning:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ggtt->error_mutex);
lock(dma_fence_map);
lock(&ggtt->error_mutex);
lock(cpu_hotplug_lock);
Fix this by calling gen8_ggtt_insert_page/gen8_ggtt_insert_entries
directly at error capture which is concurrent GGTT access safe because
reset path make sure of that.
v2: Fix rebase conflict and added a comment.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5595
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624110821.29190-1-nirmoy.das@intel.com
Our internal teams have identified a few additional engine registers
that are worth inspecting in error state dumps during development &
debug. Let's capture and print them as part of our error dump.
For simplicity we'll just dump these registers on gen11 and beyond.
Most of these registers have existed since earlier platforms (e.g., gen6
or gen7) but were initially introduced only for a subset of the
platforms' engines; gen11 seems to be where they became available on all
engines.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601210646.615946-1-matthew.d.roper@intel.com
No need to have this parameter in intel_device_info struct
as all platforms with graphics version 9 or newer has graphics
microcontroller.
As a side effect of the of removal this flag, it will not be printed
in dmesg during driver load anymore and developers will have to rely
on to check the macro and compare with platform being used and IP
versions of it.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505193524.276400-1-jose.souza@intel.com
In order to get the GSC Support merged on drm-intel-gt-next
in a clean fashion we needed this ATS-M patch to avoid
conflict in i915_pci.c:
commit 412c942bdf ("drm/i915/ats-m: add ATS-M platform info")
--
Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c:
- if (!intel_vtd_active(i915))
+ if (!i915_vtd_active(i915))
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Track context active (on hardware) status together with the start
timestamp.
This will be used to provide better granularity of context
runtime reporting in conjunction with already tracked pphwsp accumulated
runtime.
The latter is only updated on context save so does not give us visibility
to any currently executing work.
As part of the patch the existing runtime tracking data is moved under the
new ce->stats member and updated under the seqlock. This provides the
ability to atomically read out accumulated plus active runtime.
v2:
* Rename and make __intel_context_get_active_time unlocked.
v3:
* Use GRAPHICS_VER.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com> # v1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401142205.3123159-6-tvrtko.ursulin@linux.intel.com
Only intel_dmc.c should be accessing dmc details directly.
Need to add an i915_error_printf() stub for
CONFIG_DRM_I915_CAPTURE_ERROR=n.
v2: Add the stub (kernel test robot <lkp@intel.com>)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220330113417.220964-1-jani.nikula@intel.com
Continuation of the effort to declutter i915_drv.h.
Also, component specific helpers which consult the iommu/virtualization
helpers moved to respective component source/header files as appropriate.
v2:
* s/dev_priv/i915/ in intel_scanout_needs_vtd_wa. (Lucas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329090204.2324499-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup conflict in i915_drv.h]
Print the GuC captured error state register list (string names
and values) when gpu_coredump_state printout is invoked via
the i915 debugfs for flushing the gpu error-state that was
captured prior.
Since GuC could have reported multiple engine register dumps
in a single notification event, parse the captured data
(appearing as a stream of structures) to identify each dump as
a different 'engine-capture-group-output'.
Finally, for each 'engine-capture-group-output' that is found,
verify if the engine register dump corresponds to the
engine_coredump content that was previously populated by the
i915_gpu_coredump function. That function would have copied
the context's vma's including the bacth buffer during the
G2H-context-reset notification that occurred earlier. Perform
this verification check by comparing guc_id, lrca and engine-
instance obtained from the 'engine-capture-group-output' vs a
copy of that same info taken during i915_gpu_coredump. If
they match, then print those vma's as well (such as the batch
buffers).
NOTE: the output format was verified using the gem_exec_capture
IGT test.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-14-alan.previn.teres.alexis@intel.com
Add a flags parameter through all of the coredump creation
functions. Add a bitmask flag to indicate if the top
level gpu_coredump event is triggered in response to
a GuC context reset notification.
Using that flag, ensure all coredump functions that
read or print mmio-register values related to work submission
or command-streamer engines are skipped and replaced with
a calls guc-capture module equivalent functions to retrieve
or print the register dump.
While here, split out display related register reading
and printing into its own function that is called agnostic
to whether GuC had triggered the reset.
For now, introduce an empty printing function that can
filled in on a subsequent patch just to handle formatting.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-13-alan.previn.teres.alexis@intel.com
When running on Xe_HP or beyond, let's use an updated format for
describing topology in our error state dumps and debugfs to give a
more accurate view of the hardware:
- Just report DSS directly without the legacy "slice0" output that's no
longer meaningful.
- Indicate whether each DSS is accessible for geometry and/or compute.
- Rename "rcs_topology" to "sseu_topology" since the information
reported is common to both RCS and CCS engines now.
v2:
- Name static functions in a more consistent manner. (Lucas)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311225459.385515-2-matthew.d.roper@intel.com
We shouldn't really be keeping track of how many SFC_DONE registers
our platforms can have, but rather how many SFC hardware units there can
be (each SFC unit will have one corresponding SFC_DONE register). So
drop the stray GEN12_SFC_DONE_MAX definition we had in the register
definition file and replace it with an I915_MAX_SFC that follows the
pattern we use for other hardware units. Note that our hardware has a
2:1:1 ratio of VD:VE:SFC, and as far as we know that pattern should
carry forward to future platforms, so we'll define it as #VCS/2.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311062835.163744-1-matthew.d.roper@intel.com
Include linux/highmem.h and linux/swap.h explicitly where needed so we
can drop the linux/i2c.h include from i915_drv.h where it pulled in the
dependencies implicitly.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303181931.1661767-5-jani.nikula@intel.com
Remove the local yesno() implementation and adopt the str_yes_no() from
linux/string_helpers.h.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-1-lucas.demarchi@intel.com
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's 1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
This is a huge, chaotic mass of registers copied over as-is without any
real cleanup. We'll come back and organize these better, align on
consistent coding style, remove dead code, etc. in separate patches
later that will be easier to review.
v2:
- Add missing include in intel_pxp_irq.c
v3:
- Correct a few indentation errors (Lucas)
- Minor conflict resolution
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-6-matthew.d.roper@intel.com
Catch-up with 5.17-rc2 and trying to align with drm-intel-gt-next
for a possible topic branch for merging the split of i915_regs...
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Allocate intel_engine_coredump_alloc with ALLOW_FAIL rather than
GFP_KERNEL to fully decouple the error capture from fence signalling.
v2:
(John Harrison)
- Fix typo in commit message (s/do/to)
Fixes: 8b91cdd4f8 ("drm/i915: Use __GFP_KSWAPD_RECLAIM in the capture code")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220121043118.24886-2-matthew.brost@intel.com
Let's continue breaking up and cleaning up the massive i915_reg.h file
by moving all registers that are defined in relation to an engine base
to their own header.
There are probably a bunch of other "engine registers" that we haven't
moved yet (especially those that belong to the render engine in the
0x2??? range), but this is a relatively straightforward first step.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-8-matthew.d.roper@intel.com
There is always a struct vma_resource guaranteed to be alive when we
access a corresponding struct vma_snapshot.
So ditch the latter and instead of allocating vma_snapshots, reference
the already existning vma_resource.
This requires a couple of extra members in struct vma_resource but that's
a small price to pay for the simplification.
v2:
- Fix a missing include and declaration (kernel test robot <lkp@intel.com>)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-7-thomas.hellstrom@linux.intel.com
When introducing asynchronous unbinding, the vma itself may no longer
be alive when the actual binding or unbinding takes place.
Update the gtt i915_vma_ops accordingly to take a struct i915_vma_resource
instead of a struct i915_vma for the bind_vma() and unbind_vma() ops.
Similarly change the insert_entries() op for struct i915_address_space.
Replace a couple of i915_vma_snapshot members with their newly introduced
i915_vma_resource counterparts, since they have the same lifetime.
Also make sure to avoid changing the struct i915_vma_flags (in particular
the bind flags) async. That should now only be done sync under the
vm mutex.
v2:
- Update the vma_res::bound_flags when binding to the aliased ggtt
v6:
- Remove I915_VMA_ALLOC_BIT (Matthew Auld)
- Change some members of struct i915_vma_resource from unsigned long to u64
(Matthew Auld)
v7:
- Fix vma resource size parameters to be u64 rather than unsigned long
(Matthew Auld)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172219.107131-3-thomas.hellstrom@linux.intel.com
Use to_gt() helper consistently throughout the codebase.
Pure mechanical s/i915->gt/to_gt(i915). No functional changes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214193346.21231-10-andi.shyti@linux.intel.com
When updating the error capture code and introducing vma snapshots,
we introduced code to hold the vma in memory while capturing it,
calling i915_active_acquire_if_busy(). Now that function isn't relevant
for perma-pinned vmas and caused important vmas to be dropped from the
coredump. Like for example the GuC log.
Fix this by instead requiring those vmas to be pinned while capturing.
Tested by running the initial subtests of the gem_exec_capture igt test
with GuC submission enabled and verifying that a GuC log blob appears
in the output.
Fixes: ff20afc4ce ("drm/i915: Update error capture code to avoid using the current vma state")
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reported-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208082245.86933-1-thomas.hellstrom@linux.intel.com
With asynchronous migrations, the vma state may be several migrations
ahead of the state that matches the request we're capturing.
Address that by introducing an i915_vma_snapshot structure that
can be used to snapshot relevant state at request submission.
In order to make sure we access the correct memory, the snapshots take
references on relevant sg-tables and memory regions.
Also move the capture list allocation out of the fence signaling
critical path and use the CONFIG_DRM_I915_CAPTURE_ERROR define to
avoid compiling in members and functions used for error capture
when they're not used.
Finally, Introduce lockdep annotation.
v4:
- Break out the capture allocation mode change to a separate patch.
v5:
- Fix compilation error in the !CONFIG_DRM_I915_CAPTURE_ERROR case
(kernel test robot)
v6:
- Use #if IS_ENABLED() instead of #ifdef to match driver style.
- Move yet another change of allocation mode to the separate patch.
- Commit message rework due to patch reordering.
v7:
- Adjust for removal of region refcounting.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211129202245.472043-1-thomas.hellstrom@linux.intel.com
With both integrated and discrete Intel GPUs in a system, the current
global check of intel_iommu_gfx_mapped, as done from intel_vtd_active()
may not be completely accurate.
In this patch we add i915 parameter to intel_vtd_active() in order to
prepare it for multiple GPUs and we also change the check away from Intel
specific intel_iommu_gfx_mapped (global exported by the Intel IOMMU
driver) to probing the presence of IOMMU on a specific device using
device_iommu_mapped().
This will return true both for IOMMU pass-through and address translation
modes which matches the current behaviour. If in the future we wanted to
distinguish between these two modes we could either use
iommu_get_domain_for_dev() and check for __IOMMU_DOMAIN_PAGING bit
indicating address translation, or ask for a new API to be exported from
the IOMMU core code.
v2:
* Check for dmar translation specifically, not just iommu domain. (Baolu)
v3:
* Go back to plain "any domain" check for now, rewrite commit message.
v4:
* Use device_iommu_mapped. (Robin, Baolu)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211126141424.493753-1-tvrtko.ursulin@linux.intel.com
The gpu coredump typically takes place in a dma_fence signalling
critical path, and hence can't use GFP_KERNEL allocations, as that
means we might hit deadlocks under memory pressure. However
changing to __GFP_KSWAPD_RECLAIM which will be done in an upcoming
patch will instead mean a lower chance of the allocation succeeding.
In particular large contigous allocations like the coredump page
vector.
Remove the page vector in favor of a linked list of single pages.
Use the page lru list head as the list link, as the page owner is
allowed to do that.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211108174547.979714-2-thomas.hellstrom@linux.intel.com
On Xe_HP and beyond the SFC unit may be fused off, even if the
corresponding media engines are present. Check the SFC-specific fusing
before trying to dump the SFC_DONE instances.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917161203.812251-3-matthew.d.roper@intel.com
