Add support to print ip information to be
used to print registers in devcoredump
buffer.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the protoype for print ip state to be used
to print the registers in devcoredump during
a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding gfx10 gc registers to be used for register
dump via devcoredump during a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Here are the corrections needed for the queue ring buffer size
calculation for the following cases:
- Remove the KIQ VM flush ring usage.
- Add the invalidate TLBs packet for gfx10 and gfx11 queue.
- There's no VM flush and PFP sync, so remove the gfx9 real
ring and compute ring buffer usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use correct ref/mask for differnent gfx ring pipe.
This should fix the gfx hang issue after enabling gfx pipe1.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2117
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The total size of the fw_name buffer is 8 (for "amdgpu/") + 30 (for
ucode_prefix) + 5 (for "_pfp") + 5 (for "_wks") + 5 (for ".bin") = 53
characters.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c: In function ‘gfx_v10_0_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3982:58: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
3982 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3982:9: note: ‘snprintf’ output between 16 and 49 bytes into a destination of size 40
3982 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3988:57: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 1 and 30 [-Wformat-truncation=]
3988 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3988:9: note: ‘snprintf’ output between 15 and 48 bytes into a destination of size 40
3988 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3994:57: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 1 and 30 [-Wformat-truncation=]
3994 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3994:9: note: ‘snprintf’ output between 15 and 48 bytes into a destination of size 40
3994 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4001:62: warning: ‘_rlc.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
4001 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4001:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40
4001 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4017:58: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=]
4017 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks);
| ^~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4017:9: note: ‘snprintf’ output between 16 and 49 bytes into a destination of size 40
4017 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4024:54: warning: ‘_mec2’ directive output may be truncated writing 5 bytes into a region of size between 4 and 33 [-Wformat-truncation=]
4024 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks);
| ^~~~~
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4024:9: note: ‘snprintf’ output between 17 and 50 bytes into a destination of size 40
4024 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
First of all calculating the number of dw to patch into a
conditional execution is not something HW generation specific.
This is just standard ring buffer calculations. While at it also
reduce the BUG_ON() into WARN_ON().
Then instead of a random bit pattern use 0 as default value for
the number of dw skipped, this way it's not mandatory any more
to patch the conditional execution.
And last make the address to check a parameter of the
conditional execution instead of getting this from the ring.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop redundant parameters in function amdgpu_gfx_kiq_init_ring
to simplify the code
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same calls are made directly above, but conditional on the firmware
loading and validating successfully.
Cc: stable@vger.kernel.org
Fixes: 9931b67690 ("drm/amd: Load GFX10 microcode during early_init")
Signed-off-by: David McFarland <corngood@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads. Updated firmware is also
required for AQL.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Submit command of wreg in GFX and COMPUTE ring to update
RLC_SPM_MC_CNT in guest machine during runtime.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the RLC firmware is invalid because of wrong header size,
the pointer to the rlc firmware is released in function
amdgpu_ucode_request. There will be a null pointer error
in subsequent use. So skip validation to fix it.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This improves latency if the GPU is already busy with other work.
This is useful for VR compositors that submit highly latency-sensitive
compositing work on high-priority compute queues while the GPU is busy
rendering the next frame.
Userspace merge request:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26462
v2: bump driver version (Alex)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] During suspend, if GFX DPM is enabled and GFXOFF feature is
enabled the system may get hung. So, it is suggested to disable
GFXOFF feature during suspend and enable it after resume.
[How] Update the code to disable GFXOFF feature during suspend and enable
it after resume.
[ 311.396526] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 311.396530] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features!
[ 311.396531] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Kun Liu <kun.liu2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Since they were moved to VRAM, we need to use the IO
variants of memcpy.
Fixes: 1cfb4d6121 ("drm/amdgpu: put MQDs in VRAM")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX doorbell range should be set after flr otherwise the gfx doorbell
range will be overlap with MEC.
v2: remove "amdgpu_sriov_vf" and "amdgpu_in_reset" check, and add grbm
select for the case of 2 gfx rings.
Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an inline function for version check. Gives more flexibility to
handle any format changes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we store CU info only for a single XCC assuming
that it is the same for all XCCs. However, that may not be
true. As a result, store CU info for all XCCs. This info is
later used for CU masking.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register RLC_SPM_MC_CNTL is not blocked by L1 policy, VF can
directly access it through MMIO during SRIOV runtime.
v2: use SOC15 interface to access registers
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add RLCG interface support for gfx v9.4.3 and multiple XCCs.
Do not enable it yet.
v2: Fix amdgpu_rlcg_reg_access_ctrl init, add support for multiple XCCs
in amdgpu_mm_wreg_mmio_rlc
v3: Use GET_INST() when indexing amdgpu_rlcg_reg_access_ctrl
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rlc_init() is part of sw_init() so it should not touch hardware.
Additionally, calling the rlc update_spm_vmid() callback
directly invokes a gfx on/off cycle which could result in
powergating being enabled before hw init is complete. Split
update_spm_vmid() into an internal implementation for local
use without gfxoff interaction and then the rlc callback
which includes gfxoff handling.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below checkpatch errors & warnings:
ERROR: that open brace { should be on the previous line
ERROR: space prohibited before that ',' (ctx:WxV)
ERROR: space required after that ',' (ctx:WxV)
ERROR: code indent should use tabs where possible
ERROR: switch and case should be at the same indent
WARNING: please, no spaces at the start of a line
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: space prohibited before semicolon
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Missing a blank line after declarations
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch warnings:
WARNING: else is not generally useful after a break or return
+ return true;
+ } else {
WARNING: else is not generally useful after a break or return
+ return true;
+ } else {
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can selectively enable it on certain devices. No
intended functional change.
Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing debug trap registers references and initialize all debug
registers on boot by clearing the hardware exception overrides and the
wave allocation ID index.
The debugger requires that TTMPs 6 & 7 save the dispatch ID to map
waves onto dispatch during compute context inspection.
In order to correctly set this up, set the special reserved CP bit by
default whenever the MQD is initailized.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sched.ready is nothing with ring initialization, it needs to set
to be true after ring/IB test in amdgpu_ring_test_helper to tell
the ring is ready for submission.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates the 'regs2' interface for MMIO
registers to add a new IOCTL command for a 'v2' state
data that includes the XCC ID.
This patch then updates amdgpu_gfx_select_se_sh()
and amdgpu_gfx_select_me_pipe_q() (and the implementations
in the gfx drivers) to support an additional parameter.
This patch then creates a new debugfs interface "gprwave"
which is a merge of shader GPR and wave status access. This
new inteface uses an IOCTL to select banks as well as XCC identity.
(v2) Fix missing xcc_id in wave_ind function
(v3) Fix pm runtime calls and mutex locking
(v4) Fix bad label
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Each partition has its own gfxhub or mmhub. adjust
the num of MAX_VMHUBS and the GFXHUB/MMHUB layout (Le)
v2: re-design the AMDGPU_GFXHUB/AMDGPU_MMHUB layout (Le)
v3: apply the gfxhub/mmhub layout to new IPs (Hawking)
v4: fix up gmc11 (Alex)
v5: rebase (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we get a full system lock (looks like a FW mess).
Copied the order from the GFX9 powergating code.
Fixes: 366468ff6c ("drm/amdgpu: Allow GfxOff on Vangogh as default")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2545
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always restore the MQD not just when we do a reset.
This allows us to move the MQD to VRAM if we want.
v2: always reset ring pointer as well (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: To support multple XCD case (Le)
v2: unify naming style (Le)
v3: apply the changes to gc v11_0 (Hawking)
v4: apply the changes to gc SOC21 (Morris)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: To support multiple XCD case (Le)
v2: introduce xcc index to gfx_v11_0_select_sh_se (Hawking)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: Modify kiq_init/fini, mqd_sw_init/fini and
enable/disable_kcq to adapt to multi-die case.
Pass 0 as default to all asics with single xcc (Le)
v2: squash commits to avoid breaking the build (Le)
v3: unify naming style (Le)
v4: apply the changes to gc v11_0 (Hawking)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To allocate independent queue_bitmap for each XCD,
then the old bitmap policy can be continued to use
with a clear logic.
Use mec_bitmap[0] as default for all non-GC 9.4.3 IPs.
v2: squash commits to avoid breaking the build
v3: unify naming style
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: more kiq instances are a available in SOC (Le)
v2: squash commits to avoid breaking the build (Le)
v3: make the conversion for gfx/mec v11_0 (Hawking)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks better to place this field in ring
structure. Also drop the repeated ring funcs definitions
if there's no difference except for vmhub field.
v2: rename the field to vm_hub like others (Le)
v3: apply the changes to new ip blocks (Hawking)
v4: fix vcn sw ring (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:7292:11: error:
unused variable 'tmp' [-Werror=unused-variable]
uint32_t tmp;
^~~
tmp is not used so remove it.
Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not clear kiq position in RLC_CP_SCHEDULER so that CP could perform
IDLE-SAVE after VF fini.
Otherwise it could cause GFX hang if another Win guest is rendering.
Signed-off-by: leiyaoyao <yaoyao.lei@amd.com>
Acked-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplifies the code so that GFX10 will get the firmware
name from `amdgpu_ucode_ip_version_decode` and then use this filename
to load microcode as part of the early_init process.
Any failures will cause the driver to fail to probe before the firmware
framebuffer has been removed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unload.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- clear kiq ring after suspend/resume under sriov to aviod kiq ring
test failure
- update irq after resume to fix kiq interrput loss
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So the callbacks are set early in case we need them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
