Since commit 06d67d5474 ("powerpc: make process.c suitable for both
32-bit and 64-bit"), thread.regs is set on task creation, no need to
set it again and again at each interrupt entry as it never change.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20d52c627303d63e461797df13e6890fc04017d0.1615552867.git.christophe.leroy@csgroup.eu
Now that the MMU is re-enabled before calling the transfer function,
we don't need anymore that hack with the address of the handler and
the return function sitting just after the 'bl' to the transfer
fonction, that function is retrieving via a read relative to 'lr'.
Do a regular call to the transfer function, then to the handler,
then branch to the return function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/73c00f3361ca280ef8fd7814c291bd1f5b6e2081.1615552867.git.christophe.leroy@csgroup.eu
Refactor booke critical registers saving into a few macros
and move it into the exception prolog directly.
Keep the dedicated transfert_to_handler entry point for the
moment allthough they are empty. They will be removed in a
later patch to reduce churn.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/269171496f1f5f22afa621695bded22976c9d48d.1615552867.git.christophe.leroy@csgroup.eu
The space in the head section is rather constrained by the fact that
exception vectors are spread every 0x100 bytes and sometimes we
need to have "out of line" code because it doesn't fit.
Now that we are enabling MMU early in the prolog, take that opportunity
to jump somewhere else in the .text section where we don't have any
space constraint.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/38b31ca4bc782a4985bc7952a675404d7ff27c24.1615552867.git.christophe.leroy@csgroup.eu
For consistency, add in the macro the label used by exception prolog
to branch to stack overflow processing.
While at it, enclose the macro in #ifdef CONFIG_VMAP_STACK on the 8xx
as already done on book3s/32.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cf80056f5b946572ad98aea9d915dd25b23beda6.1615552867.git.christophe.leroy@csgroup.eu
The check of the emergency context initialisation in
vmap_stack_overflow is buggy for the SMP case, as it
compares r1 with 0 while in the SMP case r1 is offseted
by the CPU id.
Instead of fixing it, just perform static initialisation
of the first emergency context.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4a67ba422be75713286dca0c86ee0d3df2eb6dfa.1615552867.git.christophe.leroy@csgroup.eu
On 40x and 8xx, kernel text is pinned.
On book3s/32, kernel text is mapped by BATs.
Enable instruction translation at the same time as data translation, it
makes things simpler.
In syscall handler, MSR_RI can also be set at the same time because
srr0/srr1 are already saved and r1 is set properly.
On booke, translation is always on, so at the end all PPC32
have translation on early. Just update msr.
Also update comment in power_save_ppc32_restore().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5269c7e5f5d2117358af3a89744d75a116be27b0.1615552867.git.christophe.leroy@csgroup.eu
8xx requires to tag the DAR with a magic value in order to
fixup DAR on faults generated by 'dcbX', as the 8xx
forgets to update the DAR for those faults.
Do the tagging as early as possible, that is before enabling MMU.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/853a2e28ca7c5fc85617037030f99fe6070c9536.1615552867.git.christophe.leroy@csgroup.eu
If the code can use a stack in vm area, it can also use a
stack in linear space.
Simplify code by removing old non VMAP stack code on PPC32.
That means the data translation is now re-enabled early in
exception prolog in all cases, not only when using VMAP stacks.
While we are touching EXCEPTION_PROLOG macros, remove the
unused for_rtas parameter in EXCEPTION_PROLOG_1.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7cd6440c60a7e8f4f035b245c57720f51e225aae.1615552866.git.christophe.leroy@csgroup.eu
ksp_limit is there to help detect stack overflows.
That is specific to ppc32 as it was removed from ppc64 in
commit cbc9565ee8 ("powerpc: Remove ksp_limit on ppc64").
There are other means for detecting stack overflows.
As ppc64 has proven to not need it, ppc32 should be able to do
without it too.
Lets remove it and simplify exception handling.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d789c3385b22e07bedc997613c0d26074cb513e7.1615552866.git.christophe.leroy@csgroup.eu
Ensure normal exception handler are able to manage stuff with
MMU enabled. For that we use CONFIG_VMAP_STACK related code
allthough there is no intention to really activate CONFIG_VMAP_STACK
on powerpc 40x for the moment.
40x uses SPRN_DEAR instead of SPRN_DAR and SPRN_ESR instead of
SPRN_DSISR. Take it into account in common macros.
40x MSR value doesn't fit on 15 bits, use LOAD_REG_IMMEDIATE() in
common macros that will be used also with 40x.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/01963af2b83037bca270d7bf1336ffcf35da8282.1615552866.git.christophe.leroy@csgroup.eu
In order the enable MMU early in exception prolog, implement
CONFIG_VMAP_STACK principles in critical exception prolog.
There is no intention to use CONFIG_VMAP_STACK on 40x,
but related code will be used to enable MMU early in exception
in a later patch.
Also address (critirq_ctx - PAGE_OFFSET) directly instead of
using tophys() in order to win one instruction.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3fd75ee54c48307119acdbf66cfea966c1463bbd.1615552866.git.christophe.leroy@csgroup.eu
SPRN_SPRG_SCRATCH5 is used to save SPRN_PID.
SPRN_SPRG_SCRATCH6 is already available.
SPRN_PID is only 8 bits. We have r12 that contains CR.
We only need to preserve CR0, so we have space available in r12
to save PID.
Keep PID in r12 and free up SPRN_SPRG_SCRATCH5.
Then In TLB miss handlers, instead of using SPRN_SPRG_SCRATCH0 and
SPRN_SPRG_SCRATCH1, use SPRN_SPRG_SCRATCH5 and SPRN_SPRG_SCRATCH6
to avoid future conflicts with normal exception prologs.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4cdaa85d38e14d594ba902424060ec55babf2c42.1615552866.git.christophe.leroy@csgroup.eu
As per ISA 3.1, prefixed instruction should not cross 64-byte
boundary. So don't allow Uprobe on such prefixed instruction.
There are two ways probed instruction is changed in mapped pages.
First, when Uprobe is activated, it searches for all the relevant
pages and replace instruction in them. In this case, if that probe
is on the 64-byte unaligned prefixed instruction, error out
directly. Second, when Uprobe is already active and user maps a
relevant page via mmap(), instruction is replaced via mmap() code
path. But because Uprobe is invalid, entire mmap() operation can
not be stopped. In this case just print an error and continue.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210311091538.368590-1-ravi.bangoria@linux.ibm.com
Usually sigset_t is exactly 8B which is a "trivial" size and does not
warrant using __copy_from_user(). Use __get_user() directly in
anticipation of future work to remove the trivial size optimizations
from __copy_from_user().
The ppc32 implementation of get_sigset_t() previously called
copy_from_user() which, unlike __copy_from_user(), calls access_ok().
Replacing this w/ __get_user() (no access_ok()) is fine here since both
callsites in signal_32.c are preceded by an earlier access_ok().
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-11-cmr@codefail.de
Add uaccess blocks and use the 'unsafe' versions of functions doing user
access where possible to reduce the number of times uaccess has to be
opened/closed.
Co-developed-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-10-cmr@codefail.de
Add uaccess blocks and use the 'unsafe' versions of functions doing user
access where possible to reduce the number of times uaccess has to be
opened/closed.
There is no 'unsafe' version of copy_siginfo_to_user, so move it
slightly to allow for a "longer" uaccess block.
Co-developed-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-9-cmr@codefail.de
Previously restore_sigcontext() performed a costly KUAP switch on every
uaccess operation. These repeated uaccess switches cause a significant
drop in signal handling performance.
Rewrite restore_sigcontext() to assume that a userspace read access
window is open by replacing all uaccess functions with their 'unsafe'
versions. Modify the callers to first open, call
unsafe_restore_sigcontext(), and then close the uaccess window.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-8-cmr@codefail.de
Previously setup_sigcontext() performed a costly KUAP switch on every
uaccess operation. These repeated uaccess switches cause a significant
drop in signal handling performance.
Rewrite setup_sigcontext() to assume that a userspace write access window
is open by replacing all uaccess functions with their 'unsafe' versions.
Modify the callers to first open, call unsafe_setup_sigcontext() and
then close the uaccess window.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-7-cmr@codefail.de
Both rt_sigreturn() and handle_rt_signal_64() contain TM-related ifdefs
which break-up an if/else block. Provide stubs for the ifdef-guarded TM
functions and remove the need for an ifdef in rt_sigreturn().
Rework the remaining TM ifdef in handle_rt_signal64() similar to
commit f1cf4f93de ("powerpc/signal32: Remove ifdefery in middle of if/else").
Unlike in the commit for ppc32, the ifdef can't be removed entirely
since uc_transact in sigframe depends on CONFIG_PPC_TRANSACTIONAL_MEM.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-6-cmr@codefail.de
The majority of setup_sigcontext() can be refactored to execute in an
"unsafe" context assuming an open uaccess window except for some
non-inline function calls. Move these out into a separate
prepare_setup_sigcontext() function which must be called first and
before opening up a uaccess window. Non-inline function calls should be
avoided during a uaccess window for a few reasons:
- KUAP should be enabled for as much kernel code as possible.
Opening a uaccess window disables KUAP which means any code
executed during this time contributes to a potential attack
surface.
- Non-inline functions default to traceable which means they are
instrumented for ftrace. This adds more code which could run
with KUAP disabled.
- Powerpc does not currently support the objtool UACCESS checks.
All code running with uaccess must be audited manually which
means: less code -> less work -> fewer problems (in theory).
A follow-up commit converts setup_sigcontext() to be "unsafe".
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-4-cmr@codefail.de
Reuse the "safe" implementation from signal.c but call unsafe_get_user()
directly in a loop to avoid the intermediate copy into a local buffer.
Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210227011259.11992-3-cmr@codefail.de
Use user access block in gpr32_set_common() instead of
repetitive __get_user() which imply repetitive KUAP open/close.
To get it clean, force inlining of the small set of tiny functions
called inside the block.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bdcb8652c3bb4ab5b8b3bfd08147434be8fc04c9.1615398498.git.christophe.leroy@csgroup.eu
"offsetof(struct pt_regs, msr) == offsetof(struct user_pt_regs, msr)"
checked in pt_regs_check() twice in a row. Remove the second check.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210305112807.26299-1-efremov@linux.com
asm/tm.h included in traps.c is duplicated. It is also included on
the 62nd line.
asm/udbg.h included in setup-common.c is duplicated. It is also
included on the 61st line.
asm/bug.h included in arch/powerpc/include/asm/book3s/64/mmu-hash.h
is duplicated. It is also included on the 12th line.
asm/tlbflush.h included in arch/powerpc/include/asm/pgtable.h is
duplicated. It is also included on the 11th line.
asm/page.h included in arch/powerpc/include/asm/thread_info.h is
duplicated. It is also included on the 13th line.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
[mpe: Squash together from multiple commits]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If identical_pvr_fixup() is not inlined, there are two modpost warnings:
WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:of_get_flat_dt_prop()
The function identical_pvr_fixup() references
the function __init of_get_flat_dt_prop().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.
WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:identify_cpu()
The function identical_pvr_fixup() references
the function __init identify_cpu().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of identify_cpu is wrong.
identical_pvr_fixup() calls two functions marked as __init and is only
called by a function marked as __init so it should be marked as __init
as well. At the same time, remove the inline keywork as it is not
necessary to inline this function. The compiler is still free to do so
if it feels it is worthwhile since commit 889b3c1245 ("compiler:
remove CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 14b3d926a2 ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1316
Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org
If fadump_calculate_reserve_size() is not inlined, there is a modpost
warning:
WARNING: modpost: vmlinux.o(.text+0x5196c): Section mismatch in
reference from the function fadump_calculate_reserve_size() to the
function .init.text:parse_crashkernel()
The function fadump_calculate_reserve_size() references
the function __init parse_crashkernel().
This is often because fadump_calculate_reserve_size lacks a __init
annotation or the annotation of parse_crashkernel is wrong.
fadump_calculate_reserve_size() calls parse_crashkernel(), which is
marked as __init and fadump_calculate_reserve_size() is called from
within fadump_reserve_mem(), which is also marked as __init.
Mark fadump_calculate_reserve_size() as __init to fix the section
mismatch. Additionally, remove the inline keyword as it is not necessary
to inline this function; the compiler is still free to do so if it feels
it is worthwhile since commit 889b3c1245 ("compiler: remove
CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 11550dc0a0 ("powerpc/fadump: reuse crashkernel parameter for fadump memory reservation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1300
Link: https://lore.kernel.org/r/20210302195013.2626335-1-nathan@kernel.org
With some defconfig including CONFIG_CC_OPTIMIZE_FOR_SIZE,
(for instance mvme5100_defconfig and ps3_defconfig), gcc 5
generates a call to _restgpr_31_x.
Until recently it went unnoticed, but
commit 42ed6d56ad ("powerpc/vdso: Block R_PPC_REL24 relocations")
made it rise to the surface.
Provide that function (copied from lib/crtsavres.S) in
gettimeofday.S
Fixes: ab037dd87a ("powerpc/vdso: Switch VDSO to generic C implementation.")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a7aa198a88bcd33c6e35e99f70f86c7b7f2f9440.1615270757.git.christophe.leroy@csgroup.eu
unrecoverable_exception() is called from interrupt handlers or
after an interrupt handler has failed.
Make it a standard function to avoid doubling the actions
performed on interrupt entry (e.g.: user time accounting).
Fixes: 3a96570ffc ("powerpc: convert interrupt handlers to use wrappers")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ae96c59fa2cb7f24a8929c58cfa2c909cb8ff1f1.1615291471.git.christophe.leroy@csgroup.eu
Nick's patch cleaning up the SRR specifiers in exception-64s.S missed
a single instance of EXC_HV_OR_STD. Clean that up.
Caught by clang's integrated assembler.
Fixes: 3f7fbd97d0 ("powerpc/64s/exception: Clean up SRR specifiers")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225031006.1204774-2-dja@axtens.net
Rather than storing the iterator information in the registered
kmsg_dumper structure, create a separate iterator structure. The
kmsg_dump_iter structure can reside on the stack of the caller, thus
allowing lockless use of the kmsg_dump functions.
Update code that accesses the kernel logs using the kmsg_dumper
structure to use the new kmsg_dump_iter structure. For kmsg_dumpers,
this also means adding a call to kmsg_dump_rewind() to initialize
the iterator.
All this is in preparation for removal of @logbuf_lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org> # pstore
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210303101528.29901-13-john.ogness@linutronix.de
As reported by kernel test robot, a randconfig with high amount of
debuging options can lead to build failure for undefined reference
to replay_soft_interrupts() on ppc32.
This is due to gcc not seeing that __prep_irq_for_enabled_exit()
always returns true on ppc32 because it doesn't inline it for
some reason.
Force inlining of __prep_irq_for_enabled_exit() to fix the build.
Fixes: 344bb20b15 ("powerpc/syscall: Make interrupt.c buildable on PPC32")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/53f3a1f719441761000c41154602bf097d4350b5.1614148356.git.christophe.leroy@csgroup.eu
