1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
Commit graph

4954 commits

Author SHA1 Message Date
Linus Walleij
dd0fa81143 gpio: Add TODO item for debugfs interface
The idea to create a debugfs to replace the aging and
dangerous sysfs ABI for hacking and tinkering came up
on the list.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201204083533.65830-1-linus.walleij@linaro.org
2020-12-06 00:13:17 +01:00
Enrico Weigelt
c47d9e1b73 gpio: just plain warning when nonexisting gpio requested
When trying to export an nonexisting gpio ID, the kernel prints out a
big warning w/ stacktrace, sounding like a huge problem. In fact it's
a pretty normal situation, like file or device not found.

So, just print a more relaxed warning instead.

changes v2: drop defining pr_fmt()

Signed-off-by: Enrico Weigelt <info@metux.net>
Link: https://lore.kernel.org/r/20201202133754.32045-1-info@metux.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-05 23:27:01 +01:00
Kent Gibson
26d060e47e gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
Using CLOCK_REALTIME as the source for event timestamps is crucial for
some specific applications, particularly those requiring timetamps
relative to a PTP clock, so provide an option to switch the event
timestamp source from the default CLOCK_MONOTONIC to CLOCK_REALTIME.

Note that CLOCK_REALTIME was the default source clock for GPIO until
Linux 5.7 when it was changed to CLOCK_MONOTONIC due to issues with the
shifting of the realtime clock.
Providing this option maintains the CLOCK_MONOTONIC as the default,
while also providing a path forward for those dependent on the pre-5.7
behaviour.

Suggested-by: Jack Winch <sunt.un.morcov@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20201014231158.34117-2-warthog618@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-05 23:22:47 +01:00
Daniel Palmer
93224edf0b gpio: msc313: MStar MSC313 GPIO driver
This adds a driver that supports the GPIO block found in
MStar/SigmaStar ARMv7 SoCs.

The controller seems to have enough register for 128 lines
but where they are wired up differs between chips and
no currently known chip uses anywhere near 128 lines so there
needs to be some per-chip data to collect together what lines
actually have physical pins attached and map the right names to them.

The core peripherals seem to use the same lines on the
currently known chips but the lines used for the sensor
interface, lcd controller etc pins seem to be totally
different between the infinity and mercury chips

The code tries to collect all of the re-usable names,
offsets etc together so that it's easy to build the extra
per-chip data for other chips in the future.

So far this only supports the MSC313 and MSC313E chips.

Support for the SSC8336N (mercury5) is trivial to add once
all of the lines have been mapped out.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20201129110803.2461700-4-daniel@0x0f.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-05 22:41:22 +01:00
Fabio Estevam
105e051f1a gpio: mxs: Remove unused .id_table support
mxs is a devicetree-only platform and hence it does not make use
of the id_table mechanism.

Get rid of the .id_table as it is unused.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201118191938.32693-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04 09:08:54 +01:00
Linus Walleij
c4e1f7d92c gpio: tegra186: Set affinity callback to parent
This assigns the .irq_set_affinity to the parent callback.
I assume the Tegra186 is an SMP system so this would be
beneficial.

I used the pattern making the hirerarchy tolerant for missing
parent as in Marc's earlier patch.

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
Link: https://lore.kernel.org/r/20201117213351.249668-2-linus.walleij@linaro.org
2020-12-04 09:05:12 +01:00
Linus Walleij
011a78c194 gpio: sifive: Set affinity callback to parent
This assigns the .irq_set_affinity to the parent callback.
I assume the sifive GPIO can be used in systems with
SMP.

I used the pattern making the hirerarchy tolerant for missing
parent as in Marc's earlier patches.

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Yash Shah <yash.shah@sifive.com>
Cc: Wesley W. Terpstra <wesley@sifive.com>
Link: https://lore.kernel.org/r/20201117213351.249668-1-linus.walleij@linaro.org
2020-12-04 09:05:12 +01:00
Linus Walleij
3b4feb2115 gpio: sysfs: Enforce character device
If users select sysfs support they get the character device
as well so that end-users cannot complain that they
"only have sysfs on my system". They should have the
character device at all times.

If someone is in so dire need of stripping out the
character device while still enabling the sysfs ABI they
can very well patch the kernel.

Also only show this obsolete option to expert users.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201110142724.14760-1-linus.walleij@linaro.org
2020-12-04 09:03:44 +01:00
Baruch Siach
48f32a8353 gpio: mvebu: switch pwm duration registers to regmap
Commit 2233bf7a92 ("gpio: mvebu: switch to regmap for register access")
changed most readl/writel registers access calls to the regmap API in
preparation for Armada 7K/8K support. PWM duration registers were left using
readl/writel, as the driver does not support PWM for Armada 7K/8K.

Switch PWM duration registers to regmap as first step in adding Armada 7K/8K
PWM functionality support.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 12:08:21 +01:00
Baruch Siach
64b19f6abe gpio: mvebu: update Armada XP per-CPU comment
Commit 2233bf7a92 ("gpio: mvebu: switch to regmap for register access")
introduced percpu_regs to replace percpu_membase. Update the comment to
match.

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes: 2233bf7a92 ("gpio: mvebu: switch to regmap for register access")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 12:08:13 +01:00
Baruch Siach
7ee1a01e47 gpio: mvebu: fix potential user-after-free on probe
When mvebu_pwm_probe() fails IRQ domain is not released. Move pwm probe
before IRQ domain allocation. Add pwm cleanup code to the failure path.

Fixes: 757642f9a5 ("gpio: mvebu: Add limited PWM support")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 12:01:51 +01:00
Qinglang Miao
7f57b295f9 gpio: zynq: fix reference leak in zynq_gpio functions
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to putting operation will result in a
reference leak here.

A new function pm_runtime_resume_and_get is introduced in
[0] to keep usage counter balanced. So We fix the reference
leak by replacing it with new funtion.

[0] dd8088d5a8 ("PM: runtime: Add  pm_runtime_resume_and_get to deal with usage counter")

Fixes: c2df3de0d0 ("gpio: zynq: properly support runtime PM for GPIO used as interrupts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 10:41:02 +01:00
Edmond Chung
6dbbf84603 gpiolib: Don't free if pin ranges are not defined
A similar check was added in gpiochip_generic_request, but not in free.
This has caused an imbalance count of request vs. free calls to the
pinctrl driver. This patch is targeted to fix that issue.

Fixes: 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
Signed-off-by: Edmond Chung <edmondchung@google.com>
Signed-off-by: Andrew Chant <achant@google.com>
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 10:40:55 +01:00
Luo Jiaxing
60593df667 gpio: dwapb: fix NULL pointer dereference at dwapb_gpio_suspend()
Following Calltrace is found when running echo freeze > /sys/power/state.

[  272.755506] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
[  272.755585] Call trace:
[  272.755587]  dwapb_gpio_suspend+0x18/0x318
[  272.755588]  pm_generic_suspend+0x2c/0x48
[  272.755595]  acpi_subsys_suspend+0x60/0x70
[  272.755599]  dpm_run_callback.isra.18+0x40/0xe0
[  272.755601]  __device_suspend+0xf4/0x360

The reason is platform_set_drvdata() is deleted, and dwapb_gpio_suspend()
get *gpio by dev_get_drvdata().

Fixes: feeaefd378 ("gpio: dwapb: Use resource managed GPIO-chip add data method")
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 10:40:54 +01:00
Zheng Liang
0ac22098de gpio: arizona: disable pm_runtime in case of failure
pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced.

Fixes:27a49ed17e224(gpio: arizona: Add support for GPIOs that)
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 10:40:54 +01:00
Grygorii Strashko
3cc1fb7399 gpiolib: do not print err message for EPROBE_DEFER
The gpiochip may have dependencies from pinmux and so got deferred. Now it
will print error message every time -EPROBE_DEFER is returned which is
unnecessary:

"gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517"

Hence, do suppress error message for -EPROBE_DEFER case.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-01 19:02:12 +01:00
Gustavo A. R. Silva
d49ee56292 gpio: ath79: Fix fall-through warning for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
warning by explicitly adding a fallthrough pseudo-keyword to indicate
that the code is intended to fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-01 15:49:50 +01:00
Gustavo A. R. Silva
bc5d098432 gpiolib: acpi: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-01 15:48:21 +01:00
Grygorii Strashko
2ae136a34f gpio: omap: handle deferred probe with dev_err_probe() for gpiochip_add_data()
The gpiochip_add_data() may return -EPROBE_DEFER which is not handled
properly by TI GPIO driver and causes unnecessary boot log messages.

Hence, add proper deferred probe handling with new dev_err_probe() API.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-30 17:38:28 +01:00
Alexandru Ardelean
0aa4237008 gpio: xra1403: remove unneeded spi_set_drvdata()
There is no matching spi_get_drvdata() call in the driver, so there is no
need to do spi_set_drvdata(). This looks like it probably was copied from a
driver that used both spi_set_drvdata() & spi_get_drvdata().

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-30 17:36:36 +01:00
Damien Le Moal
7d3615ae40 gpio: dwapb: Remove unnecessary error message
In dwapb_get_reset(), if devm_reset_control_get_optional_shared() fails,
an error message is printed even if the failure is the benign
EPROBE_DEFER error due to the reset controller not yet being
initialized. Use dev_err_probe() to handle
devm_reset_control_get_optional_shared() errors to avoid unnecessarilly
printing an error message for the deferred probe error.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-30 17:35:01 +01:00
Bartosz Golaszewski
5300ebb695 gpio: exar: use devm action for freeing the IDA and drop remove()
We can simplify the error path in probe() and drop remove() entirely if
we provide a devm action for freeing the device ID.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski
36fb7218e8 gpio: exar: switch to using regmap
We can simplify the code in gpio-exar by using regmap. This allows us to
drop the mutex (regmap provides its own locking) and we can also reuse
regmap's bit operations instead of implementing our own update function.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski
696868d0a7 gpio: exar: unduplicate address and offset computation
Provide and use helpers for calculating the register address and bit
offset instead of hand coding it in every function.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski
0c2c7e1323 gpio: exar: use a helper variable for &pdev->dev
It's more elegant to use a helper local variable to store the address
of the underlying struct device than to dereference pdev everywhere. It
also has the benefit of avoiding unnecessary line breaks.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski
8e27c2aef8 gpio: exar: switch to a simpler IDA interface
We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.

ida_simple_get(ida, 0, 0, gfp) is equivalent to
ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to
ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID
larger than INT_MAX.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski
26ced453a5 gpio: exar: include idr.h
This driver uses IDA APIs but doesn't include the relevant header. This
fixes it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski
1bfaf1299c gpio: exar: add a newline after the copyright notice
It's customary to have a newline between the copyright header and the
includes. Add one to gpio-exar.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Michał Mirosław
a233d4ebfc gpio: tps65910: use regmap accessors
Use regmap accessors directly for register manipulation - removing one
layer of abstraction.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-11-19 08:34:22 +00:00
Greentime Hu
f52d6d8b43 gpio: sifive: To get gpio irq offset from device tree data
We can get hwirq number of the gpio by its irq_data->hwirq so that we don't
need to add more macros for different platforms. This patch is tested in
SiFive Unleashed board and SiFive Unmatched board.

Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-18 09:28:43 +01:00
Fabio Estevam
0f2c7af45d gpio: mxc: Convert the driver to DT-only
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201117105917.27591-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18 08:52:22 +01:00
Srinivas Neeli
bea67aeab0 gpio: gpio-xilinx: Check return value of of_property_read_u32
In two different instances the return value of "of_property_read_u32"
API was neither captured nor checked.
Fixed it by capturing the return value and then checking for any error.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Addresses-Coverity: "check_return"
Link: https://lore.kernel.org/r/1605201148-4508-9-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18 08:52:22 +01:00
Srinivas Neeli
0230a41ed6 gpio: gpio-xilinx: Add remove function
Added remove function support.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-7-git-send-email-srinivas.neeli@xilinx.com
[dropped pm disable call]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18 08:51:52 +01:00
Srinivas Neeli
65bbe531b5 gpio: gpio-xilinx: Add clock support
Adds clock support to the Xilinx GPIO driver.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-4-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18 00:59:37 +01:00
Srinivas Neeli
8c669fe69a gpio: gpio-xilinx: Arrange headers in sorting order
Arrange header files in sorted order.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-2-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18 00:57:27 +01:00
Andy Shevchenko
2c4d00cb8f gpiolib: acpi: Use BIT() macro to increase readability
We may use BIT() macro to increase readability in
acpi_gpio_adr_space_handler().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:35 +02:00
Andy Shevchenko
74301f2781 gpiolib: acpi: Convert pin_index to be u16
As specified by ACPI the pin index is 16-bit unsigned integer.
Define the variable, which holds it, accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:35 +02:00
Andy Shevchenko
2e2b496ceb gpiolib: acpi: Extract acpi_request_own_gpiod() helper
It appears that we are using similar code excerpts for ACPI OpRegion
and event handling. Deduplicate those excerpts by extracting a new
acpi_request_own_gpiod() helper.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:35 +02:00
Andy Shevchenko
bca404802c gpiolib: acpi: Make acpi_gpio_to_gpiod_flags() usable for GpioInt()
GpioInt() implies input configuration of the pin. Add this to
the acpi_gpio_to_gpiod_flags() and make usable for GpioInt().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:35 +02:00
Vasile-Laurentiu Stanimir
56f7058af0 gpiolib: acpi: Set initial value for output pin based on bias and polarity
GpioIo() resources don't contain an initial value for the output pin.
Therefore instead of deducting its value solely based on bias field
we should deduce that value from the polarity and the bias fields.
Typical scenario is, when pin is defined in the table and its polarity,
specified in _DSD or via platform code, is defined as active low,
in the following call chain:

  -> acpi_populate_gpio_lookup()
     -> acpi_gpio_to_gpiod_flags()

it will return GPIOD_OUT_HIGH if bias is set no matter if polarity
is GPIO_ACTIVE_LOW, so it will return the current level instead of
the logical level.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Vasile-Laurentiu Stanimir <vasile-laurentiu.stanimir@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:35 +02:00
Andy Shevchenko
1a81f19154 gpiolib: acpi: Move acpi_gpio_to_gpiod_flags() upper in the code
Move acpi_gpio_to_gpiod_flags() upper in the code to allow further refactoring.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:35 +02:00
Andy Shevchenko
ce698f4ec1 gpiolib: acpi: Move non-critical code outside of critical section
Mika noticed that some code is run under mutex when it doesn't require
the lock, like an error code assignment.

Move non-critical code outside of critical section.

Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:35 +02:00
Andy Shevchenko
8dcb7a15a5 gpiolib: acpi: Take into account debounce settings
We didn't take into account the debounce settings supplied by ACPI.
This change is targeting the mentioned gap.

Reported-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:35 +02:00
Andy Shevchenko
32fa65527c gpiolib: acpi: Use named item for enum gpiod_flags variable
Use named item instead of plain integer for enum gpiod_flags
to make it clear that even 0 has its own meaning.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:35 +02:00
Andy Shevchenko
e7b731327a gpiolib: acpi: Respect bias settings for GpioInt() resource
In some cases the GpioInt() resource is coming with bias settings
which may affect system functioning. Respect bias settings for
GpioInt() resource by calling acpi_gpio_update_gpiod_*flags() API
in acpi_dev_gpio_irq_get().

Reported-by: Jamie McClymont <jamie@kwiius.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:34 +02:00
Andy Shevchenko
f725edd86b gpiolib: Introduce gpio_set_debounce_timeout() for internal use
In some cases we would like to have debounce setter which doesn't fail
when a feature is not supported by a controller.

Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2020-11-16 14:14:34 +02:00
Andy Shevchenko
baca3b15cd gpiolib: Extract gpio_set_config_with_argument_optional() helper
This function is useful for internal use in the GPIO library.
There will be new user coming, prepare a helper for the new comer
and the existing ones.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:34 +02:00
Andy Shevchenko
6aa32ad707 gpiolib: move bias related code from gpio_set_config() to gpio_set_bias()
Move bias related code from gpio_set_config() to gpio_set_bias().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:34 +02:00
Andy Shevchenko
0c4d86663b gpiolib: Extract gpio_set_config_with_argument() for future use
In the future we will need to have a separate function
that takes an arbitrary argument value.

Extract gpio_set_config_with_argument() for that purpose.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:34 +02:00
Andy Shevchenko
8b69461c2b gpiolib: use proper API to pack pin configuration parameters
Instead of open coded macro use, call pinconf_to_config_packed().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:34 +02:00