The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/d7271362129edceebc512b49efed9ee7c3efcb6a.1622116622.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .n_voltages was missed for pickable linear ranges, fix it.
The min_sel for each pickable range should be starting from 0.
Also fix atc260x_ldo_voltage_range_sel setting (bit 5 - LDO<N>_VOL_SEL
in datasheet).
Fixes: 3b15ccac16 ("regulator: Add regulator driver for ATC260x PMICs")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/20210528230147.363974-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current code does not set .curr_table and .n_linear_ranges settings,
so it cannot use the regulator_get/set_current_limit_regmap helpers.
If we setup the curr_table, it will has 200 entries.
Implement customized .set_current_limit/.get_current_limit callbacks
instead.
Fixes: b8c054a5ea ("regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210530124101.477727-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some NVIDIA Tegra devices use a CPU soft-reset method for the reboot and
in this case we need to restore the coupled voltages to the state that is
suitable for hardware during boot. Add new regulator_sync_voltage_rdev()
helper which is needed by regulator drivers in order to sync voltage of
a coupled regulators.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
./drivers/regulator/bd71815-regulator.c:644:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Message-Id: <1622109244-54739-1-git-send-email-zou_wei@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use regulator_set_ramp_delay_regmap instead of open-coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Message-Id: <20210525141203.2562884-1-axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing .owner field in regulator_desc, which is used for refcounting.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Message-Id: <20210524123735.2363676-1-axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Use regulator_set_ramp_delay_regmap instead of open-coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Message-Id: <20210522023018.2025188-1-axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Use regulator_set_ramp_delay_regmap instead of open-coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Message-Id: <20210525102708.2519323-1-axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
For better readability, make linear_ranges entries sort by selector.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Message-Id: <20210520112719.1814396-1-axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Hi,
The next-20210521 started to fail on Nexus 7 because of the change to
regulator core that caused regression of the MAX77620 regulator driver.
The regulator driver is now getting a deferred probe and turned out
driver wasn't ready for this. The root of the problem is that OF node
of the PMIC MFD sub-device is shared with the PINCTRL sub-device and we
need to convey this information to the driver core, otherwise it will
try to claim GPIO pin that is already claimed by PINCTRL and fail the
probe.
Dmitry Osipenko (2):
regulator: max77620: Use device_set_of_node_from_dev()
regulator: max77620: Silence deferred probe error
drivers/regulator/max77620-regulator.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
--
2.30.2
Use regulator_set_ramp_delay_regmap instead of open-coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210522124250.2121076-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mend the Kconfig for REGULATOR_BD71815 to prevent build errors:
riscv32-linux-ld: drivers/regulator/bd71815-regulator.o: in function `.L0 ':
regulator.c:289: undefined reference to `rohm_regulator_set_dvs_levels'
riscv32-linux-ld: drivers/regulator/bd71815-regulator.c:370: undefined reference to `rohm_regulator_set_dvs_levels'
Fixes: 1aad39001e ("regulator: Support ROHM BD71815 regulators")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210523001427.13500-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
One of previous changes to regulator core causes PMIC regulators to
re-probe until supply regulator is registered. Silence noisy error
message about the deferred probe.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210523224243.13219-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MAX77620 driver fails to re-probe on deferred probe because driver
core tries to claim resources that are already claimed by the PINCTRL
device. Use device_set_of_node_from_dev() helper which marks OF node as
reused, skipping erroneous execution of pinctrl_bind_pins() for the PMIC
device on the re-probe.
Fixes: aea6cb9970 ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210523224243.13219-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For linear regulators, the .n_voltages is (max_uv - min_uv) / uv_step + 1.
Fixes: 0fbeae70ee ("regulator: add SCMI driver")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20210521073020.1944981-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For the boot-on/always-on regulators the set_machine_constrainst() is
called before resolving rdev->supply. Thus the code would try to enable
rdev before enabling supplying regulator. Enforce resolving supply
regulator before enabling rdev.
Fixes: aea6cb9970 ("regulator: resolve supply after creating regulator")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210519221224.2868496-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
dev_pm_genpd_set_performance_state() may fail, so had better to check it's
return value before decreasing priv->enable_counter.
Fixes: bf3a28cf42 ("regulator: fixed: support using power domain for enable/disable")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210520111811.1806293-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return -EINVAL if ramp_delay_table is NULL.
Also add WARN_ON since the driver code needs fix if this happened.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210519132255.1683863-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This enum is used only internally to the regulator driver for buck indexes.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Include linux/of.h and linux/gpio/consumer.h to fix below errors:
error: implicit declaration of function ‘of_match_ptr’
error: implicit declaration of function ‘devm_gpiod_get_from_of_node’
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210518114843.1495152-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-EINVAL is not a valid return value for .of_map_mode, return
REGULATOR_MODE_INVALID instead.
Fixes: 65ac97042d ("regulator: da9121: add mode support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Adam Ward <Adam.Ward.opensource@diasemi.com>
Link: https://lore.kernel.org/r/20210517052721.1063375-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tcs4525 regulator has a chip id of <12>.
Only allow the driver to bind to the correct chip id for safety, in
accordance with the other supported devices.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210511211335.2935163-3-pgwipeout@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TCS4525 has 128 voltage steps. With the calculation set to 127 the
most significant bit is disregarded which leads to a miscalculation of
the voltage by about 200mv.
Fix the calculation to end deadlock on the rk3566-quartz64 which uses
this as the cpu regulator.
Fixes: 914df8faa7 ("regulator: fan53555: Add TCS4525 DCDC support")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210511211335.2935163-2-pgwipeout@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tcs4525 voltage calculation is incorrect, which leads to a deadlock
on the rk3566-quartz64 board when loading cpufreq.
Fix the voltage calculation to correct the deadlock.
While we are at it, add a safety check and clean up the function names
to be more accurate.
Peter Geis (3):
regulator: fan53555: fix TCS4525 voltage calulation
regulator: fan53555: only bind tcs4525 to correct chip id
regulator: fan53555: fix tcs4525 function names
drivers/regulator/fan53555.c | 44 ++++++++++++++++++++++--------------
1 file changed, 27 insertions(+), 17 deletions(-)
--
2.25.1
The TCS4525 has 128 voltage steps. With the calculation set to 127 the
most significant bit is disregarded which leads to a miscalculation of
the voltage by about 200mv.
Fix the calculation to end deadlock on the rk3566-quartz64 which uses
this as the cpu regulator.
Fixes: 914df8faa7 ("regulator: fan53555: Add TCS4525 DCDC support")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210511211335.2935163-2-pgwipeout@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620705198-104566-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
V3:
- Drop the SoC regulator constraints for
regulator-min-microamp
regulator-max-microamp
These will be applied on a per-board basis - Mark Brown
V2:
The first version of this patch set the current limit to 3 amps as was done
in downstream. Mark indicated a preference to set this on a per-system
basis instead of blitzing it, as in downstream.
Looking at what was upstream versus what was in my working tree I saw that
in fact the VBUS boost driver had been upstreamed minus accompanying DTS in
pm8150b.
So there's no need for a fixes as this driver doesn't appear to be in use.
A subsequent patchset will enable the VBUS boost for the two relevant
upstream platforms.
First thing though, is the driver + dts change.
- Use regulator_set_current_limit_regmap/regulator_get_current_limit_regmap
with a relevant current-to-bitmap lookup.
- Add a parallel DTS entry to the pm8150b
It looks like this was submitted upstream but not followed up on
I've add regulator-min-microamp/regulator-max-microamp to Wesley's
original work.
I've made sure to test that its possible to set the current to anything in
the range of 500 mA to 3 A and confirmed the output on a scope.
Once these two patches are in, I'll send out board enablement for the
sm8150-mtp and qrb5165-rb5.
https://lore.kernel.org/linux-arm-msm/8687acdb-75e9-5fc5-dd3e-9a19615676b5@linaro.org/T/#t
Bryan O'Donoghue (1):
regulator: Add a routine to set the current limit for QCOM PMIC VBUS
Wesley Cheng (1):
arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 6 ++++++
drivers/regulator/qcom_usb_vbus-regulator.c | 12 ++++++++++++
2 files changed, 18 insertions(+)
--
2.30.1
Use rdev->regmap instead of pmic->regmap.
With this change, hi6421_spmi_regulator_disable can be removed and use
regulator_disable_regmap instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210430085555.1127994-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add hooks to regulator_get_current_limit_regmap() and
regulator_set_current_limit_regmap() with an accompanying map of amperages.
This lets us use the existing helper functions to map requested current
settings to register bit-map/indicies.
This change is required to elevate the default 2 Amps set by the bootloader
to 3 Amps or indeed to constrain the value lower as the system design may
dictate.
The valid range is 500 mA to 3 A in increments of 500 mA.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20210427130712.2005456-2-bryan.odonoghue@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
- New Drivers
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
- New Device Support
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
- Removed Device Support
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
- New Functionality
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
- New/converted Device Tree bindings; rohm,bd71815-pmic, rohm,bd9576-pmic,
netronix,ntxec, actions,atc260x,
ricoh,rn5t618, qcom-pm8xxx
- Fix-ups
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci,
atc260x-i2c, intel_quark_i2c_gpio
- Bug Fixes
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers
-----BEGIN PGP SIGNATURE-----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=IJSL
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Add support for Software Nodes to MFD Core
- Remove support for Device Properties from MFD Core
- Use standard APIs in MFD Core
New Drivers:
- Add support for ROHM BD9576MUF and BD9573MUF PMICs
- Add support for Netronix Embedded Controller, PWM and RTC
- Add support for Actions Semi ATC260x PMICs and OnKey
New Device Support:
- Add support for DG1 PCIe Graphics Card to Intel PMT
- Add support for ROHM BD71815 PMIC to ROHM BD71828
- Add support for Tolino Shine 2 HD to Netronix Embedded Controller
- Add support for AX10 BMC Secure Updates to Intel M10 BMC
Removed Device Support:
- Remove Arizona Extcon support from MFD
- Remove ST-E AB8500 Power Supply code from MFD
- Remove AB3100 altogether
New Functionality:
- Add support for SMBus and I2C modes to Dialog DA9063
- Switch to using Software Nodes in Intel (various)
New/converted Device Tree bindings:
- rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
atc260x, ricoh rn5t618, qcom pm8xxx
- Fix-ups:
- Fix error handling/path; intel_pmt
- Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
- Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
max8997
- Use correct data-type; db8500-prcmu
- Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
- Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
- Regmap related fix-ups; intel-m10-bmc, sec-core
- Reorder resource freeing during remove; intel_quark_i2c_gpio
- Make table indexing more robust; intel_quark_i2c_gpio
- Fix reference imbalances; arizona-irq
- Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio
Bug Fixes:
- Fix incorrect (register) values; intel-m10-bmc
- Kconfig related fixes; ABX500_CORE
- Do not clear the Auto Reload Register; stm32-timers"
* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
mfd: twl: Remove unused inline function twl4030charger_usb_en()
dt-bindings: mfd: Convert pm8xxx bindings to yaml
dt-bindings: mfd: Add compatible for pmk8350 rtc
i2c: designware: Get rid of legacy platform data
mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
mfd: arizona: Fix rumtime PM imbalance on error
mfd: max8997: Replace 8998 with 8997
mfd: core: Use acpi_find_child_device() for child devices lookup
mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
mfd: intel_quark_i2c_gpio: Enable MSI interrupt
mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
mfd: ntxec: Support for EC in Tolino Shine 2 HD
mfd: stm32-timers: Avoid clearing auto reload register
mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
mfd: intel_quark_i2c_gpio: Remove unused struct device member
mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
...
Not much going on with regulator this cycle, even in terms of cleanups
and fixes things were fairly quiet.
- New helper for setting ramp delay.
- Conversion of the Qualcomm RPMH bindings to YAML.
- Support for Tang Cheng TCS4525.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmCGwr0ACgkQJNaLcl1U
h9AoxQf9GL9+ikg6p5RagNLslkcdsKaCfQJKzUTKIJGfFbmYLOqxNPyrFX2R3Dv3
YPGDzWwT7ZdBbXyXO5fr7Y8iqO+STyLeQnSCT0TSGATKrst+Gjwrt6Jc4pzyaPAc
lRC6atB1Lprucqh3gH4KTsuFPw6ag/44EdNevr37e9o2u5f3hLsy23Ng+xhP4Wfp
S7R18OGSpW0kHuLwomfjLC6sk1QfLnw6hIoDc7znmnndxQE1+z89p7SZ46hrf4hf
2bcWMLiXqthhzITTDUY41SmqSQVpSCyBjEjjIMcn6PdjJolTAHJuP3+wuLQYWf5r
MBhgxTssJTm+y4QlOhRoeoqAWJAxXw==
=9ZSz
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Not much going on with regulator this cycle, even in terms of cleanups
and fixes things were fairly quiet.
- New helper for setting ramp delay
- Conversion of the Qualcomm RPMH bindings to YAML
- Support for Tang Cheng TCS4525"
* tag 'regulator-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
regulator: Add binding for TCS4525
regulator: fan53555: Add TCS4525 DCDC support
dt-bindings: vendor-prefixes: Add Tang Cheng (TCS)
regulator: core: Fix off_on_delay handling
regulator: core: Respect off_on_delay at startup
regulator: core.c: Improve a comment
regulator: Avoid a double 'of_node_get' in 'regulator_of_get_init_node()'
regulator: core.c: Fix indentation of comment
regulator: s2mps11: Drop initialization via platform data
regulator: s2mpa01: Drop initialization via platform data
regulator: da9121: automotive variants identity fix
regulator: Add regmap helper for ramp-delay setting
regulator: helpers: Export helper voltage listing
regulator: Add compatibles for PM7325/PMR735A
regulator: Convert RPMh regulator bindings to YAML
regulator: qcom-rpmh: Add PM7325/PMR735A regulator support
regulator: qcom-rpmh: Add pmic5_ftsmps520 buck
regulator: mt6360: remove redundant error print
regulator: bd9576: Fix return from bd957x_probe()
regulator: add missing call to of_node_put()
...
