HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS
method. If VGBS is not called on boot, the firmware sends an initial
0xcd event shortly after calling the BTNL method, but only if the device
is booted in the laptop mode. However, if the device is booted in the
tablet mode and VGBS is not called, there is no initial 0xcc event, and
the input device for SW_TABLET_MODE is not registered up until the user
turns the device into the laptop mode.
Call VGBS on boot on this device to get the initial state of
SW_TABLET_MODE in a reliable way.
Tested with BIOS 1.13.1.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230716183213.64173-1-maxtram95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE
are only send after the BTNL ACPI method has been called.
Likely more devices need this, so make the BTNL ACPI method unconditional
instead of only doing it on devices with a 5 button array.
Note this also makes the intel_button_array_enable() call in probe()
unconditional, that function does its own priv->array check. This makes
the intel_button_array_enable() call in probe() consistent with the calls
done on suspend/resume which also rely on the priv->array check inside
the function.
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/20230712175023.31651-1-maxtram95@gmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230715181516.5173-1-hdegoede@redhat.com
smatch reports
drivers/platform/x86/intel/int3472/clk_and_regulator.c:263:28: warning: symbol
'skl_int3472_regulator_second_sensor' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230702134419.3438361-1-trix@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
cap_offset is a u16 field, so multiplying with TPMI_CAP_OFFSET_UNIT
(which is equal to 1024) to covert to bytes will cause overflow. This
will be a problem once more TPMI features are added.
This field is not used except for calculating pfs->vsec_offset. So, leave
cap_offset field unchanged and multiply with TPMI_CAP_OFFSET_UNIT while
calculating pfs->vsec_offset.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230622195717.3125088-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Highlights:
- AMD PMC and PMF drivers:
- Various bugfixes
- Improved debugging support
- Intel PMC:
- Refactor to support hw with multiple PMCs
- Various other improvements / new hw support
- Intel Speed Select Technology (ISST):
- TPMI Uncore Frequency + Cluster Level Power Controls
- Various bugfixes
- tools/intel-speed-select: Misc. improvements
- Dell-DDV: Add documentation
- INT3472 ACPI camera sensor glue code:
- Evaluate device's _DSM method to control imaging clock
- Drop the need to have a table with per sensor-model info
- Lenovo Yogabook: Refactor / rework to also support Android models
- Think-LMI: Multiple improvements and fixes
- WMI: Add proper API documentation for the WMI bus
- x86-android-tablets: Misc. new hw support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
ISST:
- Fix usage counter
- Reset default callback on unregister
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
apple-gmux:
- don't use be32_to_cpu and cpu_to_be32
asus-tf103c-dock:
- Switch back to use struct i2c_driver's .probe()
dell-ddv:
- Update ABI documentation
- Add documentation
dell-sysman:
- Improve instance detection
gigabyte:
- constify pointers to hwmon_channel_info
gigabyte-wmi:
- remove allowlist
hp:
- constify pointers to hwmon_channel_info
hp-wmi:
- Add thermal profile for Victus 16-d1xxx
- Add HP Envy special key support
- Add HP WMI camera switch
int3472:
- discrete: Log a warning if the pin-numbers don't match
- discrete: Use FIELD_GET() on the GPIO _DSM return value
- discrete: Add alternative "AVDD" regulator supply name
- discrete: Add support for 1 GPIO regulator shared between 2 sensors
- discrete: Remove sensor_config-s
- discrete: Drop GPIO remapping support
- Switch back to use struct i2c_driver's .probe()
- Evaluate device's _DSM method to control imaging clock
intel/pmc:
- Add Meteor Lake IOE-M PMC related maps
- Add Meteor Lake IOE-P PMC related maps
- Use SSRAM to discover pwrm base address of primary PMC
- Discover PMC devices
- Enable debugfs multiple PMC support
- Add support to handle multiple PMCs
- Combine core_init() and core_configure()
- Update maps for Meteor Lake P/M platforms
- Remove Meteor Lake S platform support
lenovo-yogabook:
- add I2C dependency
- Rename lenovo-yogabook-wmi to lenovo-yogabook
- Add keyboard backlight control to platform driver
- Add platform driver support
- Add YB_KBD_BL_MAX define
- Group WMI specific code together
- Drop _wmi_ from remaining generic symbols
- Add a yogabook_toggle_digitizer_mode() helper function
- Abstract kbd backlight setting
- Stop checking adev->power.state
- Split probe() into generic and WMI specific parts
- Use PMIC LED driver for pen icon LED control
- Add dev local variable to probe()
- Store dev instead of wdev in drvdata struct
- Switch to DEFINE_SIMPLE_DEV_PM_OPS()
- Simplify gpio lookup table cleanup
- Set default keyboard backligh brightness on probe()
- Reprobe devices on remove()
- Fix work race on remove()
mlxbf-bootctl:
- Add sysfs file for BlueField boot log
platform/surface:
- surface3_power: Switch back to use struct i2c_driver's .probe()
platform/x86/amd:
- pmc: Update metrics table info for Pink Sardine
- pmc: Add helper function to check the cpu id
- pmc: Get STB DRAM size from PMFW
- pmc: Pass true/false to bool argument
platform/x86/amd/pmf:
- Fix compiler warnings in static slider
- Add PMF debug facilities
- Add PMF acpi debug support
platform/x86/dell/dell-rbtn:
- Fix resources leaking on error path
platform/x86/intel:
- tpmi: Remove hardcoded unit and offset
platform/x86/intel-uncore-freq:
- tpmi: Provide cluster level control
- Support for cluster level controls
- Uncore frequency control via TPMI
platform/x86/intel/pmc:
- Add resume callback
platform/x86/intel/pmc/mtl:
- Put devices in D3 during resume
system76:
- constify pointers to hwmon_channel_info
think-lmi:
- Don't display unnecessary authentication settings
- Correct NVME index default
- Correct NVME password handling
- Update password fields to use BIT
- Update password attribute comments
- Correct System password interface
- Enable opcode support on BIOS settings
- mutex protection around multiple WMI calls
thinkpad_acpi:
- Fix lkp-tests warnings for platform profiles
tools/power/x86/intel-speed-select:
- v1.16 release
- Fix json formatting issue
- Adjust scope of core-power config
toshiba:
- constify pointers to hwmon_channel_info
wmi:
- Allow retrieving the number of WMI object instances
- Add device specific documentation
- Add documentation
- Mark GUID-based WMI interface as deprecated
- Add kernel doc comments
x86-android-tablets:
- Add support for extra buttons on Cyberbook T116
- Add support for more then 1 gpio_key
- Add Lenovo Yoga Book lid switch
- Fix Bluetooth on Lenovo Yoga Book
- Add Nextbook Ares 8A data
- Remove unnecessary invalid_aei_gpiochip settings
- Add ALS sensor support for Yoga Tablet 2 1050/830 series
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmSdSpoUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xd8gf/eJ9BFzUfA8otMPcjEHZWOr6TkL3u
P0C3ITatLhLk4Y5BkQ3iQlelJlcEflYF8VDT9Xfrm086aJLI57Dv5NWvyzsVBb20
CD+5ojdASAsgeoNYO4dIEB7G8gIibvGeH7xGb+oZBl8xaVLWbBHfl4pXPSi/iGzn
33aB5yaL0v0Uveb2kQrMmQ1P4APKNCvYuoi6u6zUmansLFWpQ3NbdME/bCyqW+qx
fTNfjjuNcRBlbK4Pvf5x9tT8xzPFz0YATOe/TTyL4K490aShEnXHBio2F9FAuzib
7FeStlhUGzQuF2LabgLiBw16j/Kr5XR37eukSwY8jVvZCQCqvTRBfbgM2g==
=H1S7
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"AMD PMC and PMF drivers:
- Various bugfixes
- Improved debugging support
Intel PMC:
- Refactor to support hw with multiple PMCs
- Various other improvements / new hw support
Intel Speed Select Technology (ISST):
- TPMI Uncore Frequency + Cluster Level Power Controls
- Various bugfixes
- tools/intel-speed-select: Misc improvements
Dell-DDV: Add documentation
INT3472 ACPI camera sensor glue code:
- Evaluate device's _DSM method to control imaging clock
- Drop the need to have a table with per sensor-model info
Lenovo Yogabook:
- Refactor / rework to also support Android models
Think-LMI:
- Multiple improvements and fixes
WMI:
- Add proper API documentation for the WMI bus
x86-android-tablets:
- Misc new hw support
Miscellaneous other cleanups / fixes"
* tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (91 commits)
platform/x86:intel/pmc: Add Meteor Lake IOE-M PMC related maps
platform/x86:intel/pmc: Add Meteor Lake IOE-P PMC related maps
platform/x86:intel/pmc: Use SSRAM to discover pwrm base address of primary PMC
platform/x86:intel/pmc: Discover PMC devices
platform/x86:intel/pmc: Enable debugfs multiple PMC support
platform/x86:intel/pmc: Add support to handle multiple PMCs
platform/x86:intel/pmc: Combine core_init() and core_configure()
platform/x86:intel/pmc: Update maps for Meteor Lake P/M platforms
platform/x86/intel: tpmi: Remove hardcoded unit and offset
platform/x86: int3472: discrete: Log a warning if the pin-numbers don't match
platform/x86: int3472: discrete: Use FIELD_GET() on the GPIO _DSM return value
platform/x86: int3472: discrete: Add alternative "AVDD" regulator supply name
platform/x86: int3472: discrete: Add support for 1 GPIO regulator shared between 2 sensors
platform/x86: int3472: discrete: Remove sensor_config-s
platform/x86: int3472: discrete: Drop GPIO remapping support
platform/x86: apple-gmux: don't use be32_to_cpu and cpu_to_be32
platform/x86/dell/dell-rbtn: Fix resources leaking on error path
platform/x86: ISST: Fix usage counter
platform/x86: ISST: Reset default callback on unregister
platform/x86: int3472: Switch back to use struct i2c_driver's .probe()
...
Add device ID and register maps for the PMC in IO expansion die M in
Meteor Lake.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-9-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add device ID and register maps for the PMC in IO expansion die P in
Meteor Lake.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-8-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On older platforms, the base address for PMC was hardcoded in the
driver. Newer platforms can now retrieve the base address from SSRAM.
Use SSRAM to discover pwrm base address on Meteor Lake platform. If
this method fails, it will fall back to the hardcoded value.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-7-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On platforms with multiple PMCs, additional PMC devices are discovered
in the SSRAM device associated with the primary PMC. Add support for
discovering PMC devices from SSRAM. Use PMC devid to assign the
corresponding register map.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-6-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Enable debugfs support for multiple PMC. These debugfs attributes
show information for all enabled PMCs.
pch_ip_power_gating_status
substate_status_registers
substate_live_status_registers
ltr_show
ltr_ignore
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-5-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
To support platforms with multiple PMCs, add a PMC device structure to
support each PMC instance.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-4-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Combine core_init() and core_configure() functions to have a
cleaner setup for platforms.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-3-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix the IP name errors in the register maps used by the following
debugfs attributes in the Meteor Lake SOC-M PMC.
pfear_sts
lpm_sts
ltr_show
Fixes: c5ad454a12 ("platform/x86: intel/pmc/core: Add Meteor Lake support to pmc core driver")
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230613225347.2720665-2-rajvi.jingar@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use sizeof(u32) for TPMI entry size units. Also add a define
for capability offset unit size.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230617014447.2543592-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The INT3472 discrete code assumes that the ACPI GPIO resources are
in the same order as the pin-info _DSM entries.
The returned pin-info includes the pin-number in bits 15-8. Add a check
that this matches with the ACPI GPIO resource pin-number in case
the assumption is not true with some ACPI tables.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230616172132.37859-7-hdegoede@redhat.com
Add defines for the various fields encoded in the GPIO _DSM integer
return value and then use FIELD_GET() to get field values.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230616172132.37859-6-hdegoede@redhat.com
Add an "AVDD" regulator supply name alias to the supply-map which
gets registered for the INT3472 GPIO regulator.
This is necessary for the ov2680 driver which expects "AVDD" rather then
"avdd". Updating the ov2680 driver to use "avdd" is not possible because
that will break compatibility with existing DT / DTB files.
Tested-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230616172132.37859-5-hdegoede@redhat.com
On the Lenovo Miix 510-12IKB there is 1 GPIO regulator, with its GPIO
listed in the INT3472 device belonging to the OV5648 back sensor.
But this regulator also needs to be enabled for the OV2680 front sensor
to work.
Add support to skl_int3472_register_regulator() to add supply map entries
pointing to both sensors based on a DMI quirk table which gives the
dev_name part of the supply map for the second sensor (the sensor without
the GPIO listed in its matching INT3472 ACPI device).
Tested-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230616172132.37859-4-hdegoede@redhat.com
Currently the only 2 sensor_config-s both specify "avdd" as supply-id.
The INT3472 device is going to be the only supplier of a regulator for
the sensor device.
So there is no chance of collisions with other regulator suppliers
and it is undesirable to need to manually add new entries to
int3472_sensor_configs[] for each new sensor module which uses
a GPIO regulator.
Instead just always use "avdd" as supply-id when registering
the GPIO regulator.
If necessary for specific sensor drivers then other supply-ids can
be added as aliases in the future, adding aliases will be safe
since INT3472 will be the only regulator supplier for the sensor.
Cc: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230616172132.37859-3-hdegoede@redhat.com
The only sensor driver which needs GPIO remapping support is the ov2680
driver and ACPI enumeration support + other necessary changes to
the ov2680 driver were never upstreamed.
A new series updating the ov2680 driver is pending upstream now and
in this series the ov2680 driver is patched to look for "powerdown"
as con-id, instead of relying on GPIO remapping in the int3472 code,
so the GPIO remapping is no longer necessary.
Tested-by: Hao Yao <hao.yao@intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230616172132.37859-2-hdegoede@redhat.com
On multi package system, the TPMI SST instance is getting allocated
again as the usage counter is not getting incremented. Here the
instance is allocated only when the usage count is zero. There is
no need to allocate again.
Increment usage ID on successful return from isst_if_cdev_register().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230612224033.2382527-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When multiple clients are registered and some of those modules are
removed, the default IOCTL callback for those clients are still not
NULL. Calling them will result in crash.
Set the default IOCTL callback pointer to NULL on unregister.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230612224033.2382527-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230612073902.840435-4-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An earlier commit placed some driverless devices in D3 during boot so that
they don't block package cstate entry on Meteor Lake. Also place these
devices in D3 after resume from suspend.
Fixes: 336ba968d3 ("platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230607233849.239047-2-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a resume callback to perform platform specific functions during resume
from suspend.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230607233849.239047-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
commit c5ad454a12 ("platform/x86: intel/pmc/core: Add Meteor Lake
support to pmc core driver") was supposed to add support for Meter
Lake P/M and mistakenly added support for Meteor Lake S instead. Meteor
Lake P/M support was added later and MTL-S support needs to be removed
since its currently assigned to the wrong register maps.
Fixes: c5ad454a12 ("platform/x86: intel/pmc/core: Add Meteor Lake support to pmc core driver")
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230601004706.871528-1-xi.pardee@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When int3472 is loaded before GPIO driver, acpi_get_and_request_gpiod()
failed but the returned gpio descriptor is not NULL, it will cause panic
in later gpiod_put(), so set the gpio_desc to NULL in register error
handling to avoid such crash.
Signed-off-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Link: https://lore.kernel.org/r/20230524035135.90315-1-bingbu.cao@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stop restricting the PCI search to a range of PCI domains fed to
pci_get_domain_bus_and_slot(). Instead, use for_each_pci_dev() and
look at all PCI domains in one pass.
On systems with more than 8 sockets, this avoids error messages like
"Information: Invalid level, Can't get TDP control information at
specified levels on cpu 480" from the intel speed select utility.
Fixes: aa2ddd2425 ("platform/x86: ISST: Use numa node id for cpu pci dev mapping")
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230519160420.2588475-1-steve.wahl@hpe.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The new generation of CPUs have granular control at a cluster level.
Each package/die can have multiple power domains, which further can
have multiple fabric clusters. The TPMI interface allows control at
fabric cluster level.
Use the updated uncore sysfs feature to expose controls at cluster
level. At each cluster level there is a control for maximum and minimum
uncore frequency. Also present current uncore frequency at a cluster
level.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Link: https://lore.kernel.org/r/20230418171340.681662-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An SoC can contain multiple power domains with individual or collection
of mesh partitions. This partition is called fabric cluster.
Certain type of meshes will need to run at the same frequency, they will
be placed in the same fabric cluster. Benefit of fabric cluster is that
it offers a scalable mechanism to deal with partitioned fabrics in a SoC.
The current sysfs interface supports control at package and die level.
This interface is not enough to support more granular control at
fabric cluster level.
SoCs with the support of TPMI (Topology Aware Register and PM Capsule
Interface), can have multiple power domains. Each power domain can
contain one or more fabric clusters.
To support such granular controls, enhance uncore common to optionally
create new directories to provide controls at fabric cluster level. It
is also important to have flexibility to change granularity for future
version of SoCs. If the directory name contains scope like:
"package_*_die_*_power_domain_*_cluster_*", then this is not expandable.
The cpufreq policies also have different scopes. There the scope of the
policy (affected_cpus) specified by attributes inside each policy.
So, follow the same model for uncore frequency scaling sysfs as:
"sys/devices/system/cpu/cpufreq/policy*"
Allow client drivers to optionally support granular control for each
fabric cluster. Here, the directory name will be "uncore" suffixed with
an unique instance number. For example: uncore00, uncore01 etc.
Attributes in the directory identify package id, power domain and
fabric cluster id. This interface is expandable even if some new level
of granularity is introduced. A new sysfs attribute can identify new
level.
For compatibility with the existing sysfs and provide easy way to set
limits for each fabric cluster in the package/die, the existing control
at package/die levels are still provided. For majority of users, this is
an easy approach.
For example: On a single package/die system, with three power domains
and one fabric cluster per power domain:
$tree -L 2 /sys/devices/system/cpu/intel_uncore_frequency/
/sys/devices/system/cpu/intel_uncore_frequency/
├── package_00_die_00
│ ├── current_freq_khz
│ ├── initial_max_freq_khz
│ ├── initial_min_freq_khz
│ ├── max_freq_khz
│ └── min_freq_khz
├── uncore00
│ ├── current_freq_khz
│ ├── domain_id
│ ├── fabric_cluster_id
│ ├── initial_max_freq_khz
│ ├── initial_min_freq_khz
│ ├── max_freq_khz
│ ├── min_freq_khz
│ └── package_id
├── uncore01
│ ├── current_freq_khz
│ ├── domain_id
│ ├── fabric_cluster_id
│ ├── initial_max_freq_khz
│ ├── initial_min_freq_khz
│ ├── max_freq_khz
│ ├── min_freq_khz
│ └── package_id
└── uncore02
├── current_freq_khz
├── domain_id
├── fabric_cluster_id
├── initial_max_freq_khz
├── initial_min_freq_khz
├── max_freq_khz
├── min_freq_khz
└── package_id
The attribute for cluster id is "fabric_cluster_id" instead of just
"cluster_id" is to avoid confusion with usage of term clusters in
other part of the Linux kernel.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Link: https://lore.kernel.org/r/20230418171340.681662-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Implement support of uncore frequency control via TPMI (Topology Aware
Register and PM Capsule Interface). This driver provides the similar
functionality as the current uncore frequency driver using MSRs.
The hardware interface to read/write is basically substitution of MSR
0x620 and 0x621. There are specific MMIO offset and bits to get/set
minimum and maximum uncore ratio, similar to MSRs.
The scope of the uncore MSRs is package/die. But new generation of CPUs
have more granular control at a cluster level. Each package/die can have
multiple power domains, which further can have multiple clusters. The
TPMI interface allows control at cluster level.
The primary use case for uncore sysfs is to set maximum and minimum
uncore frequency to reduce power consumption or latency. The current
uncore sysfs control is per package/die. This is enough for the majority
of users as workload will move to different power domains as it moves
between different CPUs.
The current uncore sysfs provides controls at package/die level. When
user sets maximum/minimum limits, the driver sets the same limits to
each cluster.
Here number of power domains = number of resources in this aux device.
There are offsets and bits to discover number of clusters and offset for
each cluster level controls.
The TPMI documentation can be downloaded from:
https://github.com/intel/tpmi_power_management
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Link: https://lore.kernel.org/r/20230420220514.747573-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently when the uncore_write() returns error, it is silently
ignored. Return error to user space when uncore_write() fails.
Fixes: 49a474c7ba ("platform/x86: Add support for Uncore frequency control")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230418153230.679094-1-srinivas.pandruvada@linux.intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
or tristate.conf"). Nick has been working on this *for years* and
AFAICT I was the only one to suggest two alternatives to this approach
for tooling. The complexity in one of my suggested approaches lies in
that we'd need a possible-obj-m and a could-be-module which would check
if the object being built is part of any kconfig build which could ever
lead to it being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
suggested would be to have a tristate in kconfig imply the same new
-DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
mapping to modules always, and I don't think that's the case today. I am
not aware of Nick or anyone exploring either of these options. Quite
recently Josh Poimboeuf has pointed out that live patching, kprobes and
BPF would benefit from resolving some part of the disambiguation as
well but for other reasons. The function granularity KASLR (fgkaslr)
patches were mentioned but Joe Lawrence has clarified this effort has
been dropped with no clear solution in sight [1].
In the meantime removing module license tags from code which could never
be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up,
and so you'll see quite a bit of Nick's patches in other pull
requests for this merge window. I just picked up the stragglers after
rc3. LWN has good coverage on the motivation behind this work [2] and
the typical cross-tree issues he ran into along the way. The only
concrete blocker issue he ran into was that we should not remove the
MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
they can never be modules. Nick ended up giving up on his efforts due
to having to do this vetting and backlash he ran into from folks who
really did *not understand* the core of the issue nor were providing
any alternative / guidance. I've gone through his changes and dropped
the patches which dropped the module license tags where an SPDX
license tag was missing, it only consisted of 11 drivers. To see
if a pull request deals with a file which lacks SPDX tags you
can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above,
but that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but
it demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees,
and I just picked up the slack after rc3 for the last kernel was out.
Those changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on
a systems with over 400 CPUs when KASAN was enabled due to running
out of virtual memory space. Although the functional change only
consists of 3 lines in the patch "module: avoid allocation if module is
already present and ready", proving that this was the best we can
do on the modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been
in linux-next since around rc3 of the last kernel, the actual final
fix for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported
with larger number of CPUs. Userspace is not yet fixed as it is taking
a bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge them,
but I'm currently inclined to just see if userspace can fix this
instead.
[0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
[1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
[2] https://lwn.net/Articles/927569/
[3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----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=56WK
-----END PGP SIGNATURE-----
Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
- Fix the frequency unit in cpufreq_verify_current_freq checks()
(Sanjay Chandrashekara).
- Make mode_state_machine in amd-pstate static (Tom Rix).
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar).
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring).
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu).
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny).
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada).
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring).
- Drop unnecessary (void *) conversions from the PM core (Li zeming).
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
(Mario Limonciello).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar).
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device if
ethtool exists.
* Make the tool more robustly handle events where mangled dmesg or
ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo).
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney).
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski).
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring).
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang Li).
-----BEGIN PGP SIGNATURE-----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=p/5G
-----END PGP SIGNATURE-----
Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update several cpufreq drivers and the cpufreq core, add sysfs
interface for exposing the time really spent in the platform low-power
state during suspend-to-idle, update devfreq (core and drivers) and
the pm-graph suite of tools and clean up code.
Specifics:
- Fix the frequency unit in cpufreq_verify_current_freq checks()
Sanjay Chandrashekara)
- Make mode_state_machine in amd-pstate static (Tom Rix)
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar)
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang)
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring)
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu)
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny)
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada)
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Remove MODULE_LICENSE in non-modules (Nick Alcock)
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss)
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson)
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski)
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring)
- Drop unnecessary (void *) conversions from the PM core (Li zeming)
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
Mario Limonciello)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar)
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able
to process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device
if ethtool exists.
* Make the tool more robustly handle events where mangled dmesg
or ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo)
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney)
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski)
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring)
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang
Li)"
* tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
PM: core: Remove unnecessary (void *) conversions
cpufreq: drivers with target_index() must set freq_table
PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
...
Highlights:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add driver for Yoga Tablet Mode switch:
- Add driver for Yoga Tablet Mode switch
Add intel_bytcrc_pwrsrc driver:
- Add intel_bytcrc_pwrsrc driver
Add new msi-ec driver:
- Add new msi-ec driver
Documentation/ABI:
- Update IFS ABI doc
ISST:
- unlock on error path in tpmi_sst_init()
- Add suspend/resume callbacks
- Add SST-TF support via TPMI
- Add SST-BF support via TPMI
- Add SST-PP support via TPMI
- Add SST-CP support via TPMI
- Parse SST MMIO and update instance
- Enumerate TPMI SST and create framework
- Add support for MSR 0x54
- Add API version of the target
- Add IOCTL default callback
- Add TPMI target
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge tag 'ib-pdx86-backlight-6.4' into review-hans:
- Merge tag 'ib-pdx86-backlight-6.4' into review-hans
Move ideapad ACPI helpers to a new header:
- Move ideapad ACPI helpers to a new header
acer-wmi:
- Convert to platform remove callback returning void
acerhdf:
- Remove unneeded semicolon
adv_swbutton:
- Convert to platform remove callback returning void
amilo-rfkill:
- Convert to platform remove callback returning void
apple-gmux:
- Fix iomem_base __iomem annotation
- return -EFAULT if copy fails
- Update apple_gmux_detect documentation
- Add acpi_video_get_backlight_type() check
- add debugfs interface
- support MMIO gmux on T2 Macs
- refactor gmux types
- use first bit to check switch state
backlight:
- apple_bl: Use acpi_video_get_backlight_type()
barco-p50-gpio:
- Convert to platform remove callback returning void
classmate:
- mark SPI related data as maybe unused
compal-laptop:
- Convert to platform remove callback returning void
dell:
- dell-smo8800: Convert to platform remove callback returning void
- dcdbas: Convert to platform remove callback returning void
dell-laptop:
- Register ctl-led for speaker-mute
hp:
- tc1100-wmi: Convert to platform remove callback returning void
- hp_accel: Convert to platform remove callback returning void
huawei-wmi:
- Convert to platform remove callback returning void
ideapad-laptop:
- Convert to platform remove callback returning void
intel:
- vbtn: Convert to platform remove callback returning void
- telemetry: pltdrv: Convert to platform remove callback returning void
- pmc: core: Convert to platform remove callback returning void
- mrfld_pwrbtn: Convert to platform remove callback returning void
- int3472: discrete: Convert to platform remove callback returning void
- int1092: intel_sar: Convert to platform remove callback returning void
- int0002_vgpio: Convert to platform remove callback returning void
- hid: Convert to platform remove callback returning void
- chtwc_int33fe: Convert to platform remove callback returning void
- chtdc_ti_pwrbtn: Convert to platform remove callback returning void
- bxtwc_tmu: Convert to platform remove callback returning void
intel-uncore-freq:
- Add client processors
mlxbf-bootctl:
- Add sysfs file for BlueField boot fifo
pcengines-apuv2:
- Drop platform:pcengines-apuv2 module-alias
platform/mellanox:
- add firmware reset support
platform/olpc:
- olpc-xo175-ec: Use SPI device ID data to bind device
platform/surface:
- aggregator_registry: Add support for tablet-mode switch on Surface Pro 9
- aggregator_tabletsw: Add support for Type-Cover posture source
- aggregator_tabletsw: Properly handle different posture source IDs
platform/x86/amd:
- pmc: provide user message where s0ix is not supported
- pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
- pmc: Convert to platform remove callback returning void
- pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
- pmc: Move out of BIOS SMN pair for STB init
- pmc: Utilize SMN index 0 for driver probe
- pmc: Move idlemask check into `amd_pmc_idlemask_read`
- pmc: Don't dump data after resume from s0i3 on picasso
- pmc: Hide SMU version and program attributes for Picasso
- pmc: Don't try to read SMU version on Picasso
- pmf: core: Convert to platform remove callback returning void
- hsmp: Convert to platform remove callback returning void
platform/x86/amd/pmf:
- Move out of BIOS SMN pair for driver probe
platform/x86/intel:
- vsec: Use intel_vsec_dev_release() to simplify init() error cleanup
- vsec: Explicitly enable capabilities
platform/x86/intel/ifs:
- Update IFS doc
- Implement Array BIST test
- Sysfs interface for Array BIST
- Introduce Array Scan test to IFS
- IFS cleanup
- Reorganize driver data
- Separate ifs_pkg_auth from ifs_data
platform/x86/intel/pmc/mtl:
- Put GNA/IPU/VPU devices in D3
platform/x86/intel/pmt:
- Ignore uninitialized entries
- Add INTEL_PMT module namespace
platform/x86/intel/sdsi:
- Change mailbox timeout
samsung-q10:
- Convert to platform remove callback returning void
serial-multi-instantiate:
- Convert to platform remove callback returning void
sony:
- mark SPI related data as maybe unused
think-lmi:
- Remove unnecessary casts for attributes
- Remove custom kobject sysfs_ops
- Properly interpret return value of tlmi_setting
thinkpad_acpi:
- Fix Embedded Controller access on X380 Yoga
tools/power/x86/intel-speed-select:
- Update version
- Change TRL display for Emerald Rapids
- Identify Emerald Rapids
- Display AMX base frequency
- Use cgroup v2 isolation
- Add missing free cpuset
- Fix clos-max display with TPMI I/F
- Add cpu id check
- Avoid setting duplicate tdp level
- Remove cpu mask display for non-cpu power domain
- Hide invalid TRL level
- Display fact info for non-cpu power domain
- Show level 0 name for new api_version
- Prevent cpu clos config for non-cpu power domain
- Allow display non-cpu power domain info
- Display amx_p1 and cooling_type
- Display punit info
- Introduce TPMI interface support
- Get punit core mapping information
- Introduce api_version helper
- Support large clos_min/max
- Introduce is_debug_enabled()
- Allow api_version based platform callbacks
- Move send_mbox_cmd to isst-core-mbox.c
- Abstract adjust_uncore_freq
- Abstract read_pm_config
- Abstract clos_associate
- Abstract clos_get_assoc_status
- Abstract set_clos
- Abstract pm_get_clos
- Abstract pm_qos_config
- Abstract get_clos_information
- Abstract get_get_trls
- Enhance get_tdp_info
- Abstract get_uncore_p0_p1_info
- Abstract get_fact_info
- Abstract set_pbf_fact_status
- Remove isst_get_pbf_info_complete
- Abstract get_pbf_info
- Abstract set_tdp_level
- Abstract get_trl_bucket_info
- Abstract get_get_trl
- Abstract get_coremask_info
- Abstract get_tjmax_info
- Move code right before its caller
- Abstract get_pwr_info
- Abstract get_tdp_info
- Abstract get_ctdp_control
- Abstract get_config_levels
- Abstract is_punit_valid
- Introduce isst-core-mbox.c
- Always invoke isst_fill_platform_info
- Introduce isst_get_disp_freq_multiplier
- Move mbox functions to isst-core.c
- Improve isst_print_extended_platform_info
- Rename for_each_online_package_in_set
- Introduce support for multi-punit
- Introduce isst_is_punit_valid()
- Introduce punit to isst_id
- Follow TRL nameing for FACT info
- Unify TRL levels
wmi:
- Convert to platform remove callback returning void
x86-android-tablets:
- Add accelerometer support for Yoga Tablet 2 1050/830 series
- Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
- Add Wacom digitizer info for Lenovo Yoga Book
- Update Yoga Book HiDeep touchscreen comment
- Add Lenovo Yoga Book X90F/L data
- Share lp855x_platform_data between different models
- Use LP8557 in direct mode on both the Yoga 830 and the 1050
- Add depends on PMIC_OPREGION
- Lenovo Yoga Book match is for YB1-X91 models only
- Add LID switch support for Yoga Tablet 2 1050/830 series
- Add backlight ctrl for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add touchscreen support for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add support for the Dolby button on Peaq C1010
- Add gpio_keys support to x86_android_tablet_init()
- Move remaining tablets to other.c
- Move Lenovo tablets to their own file
- Move Asus tablets to their own file
- Move shared power-supply fw-nodes to a separate file
- Move DMI match table into its own dmi.c file
- Move core code into new core.c file
- Move into its own subdir
- Add Acer Iconia One 7 B1-750 data
x86/include/asm/msr-index.h:
- Add IFS Array test bits
xo1-rfkill:
- Convert to platform remove callback returning void
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmRGmK4UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yBCAf+PebzfccC2ABHq+nFGSok18beRtFf
fGs9NI21Mjdbhhy+KsKddgZceh7pbdcaIznuka3TZAK0UXcHRe30X3eoDvSCk9YW
Xj/Uf3ExsipNh1Ung+Q1qTWtzUw7XdJWqMZ5HxlUI2ZlmSTAIOyZBpSEPrK052oi
lAbSqrnB1DEh1qYV4Q7g71R82iAR791DAH1dsDZwC1Zb6KK6fxI/zQhw4JP1XSCs
htE5RFUzPWiXG2ou5t6Nteju/QqEaCoIS7z7ZK/SgWcLlPxeksxwso3obI/U8PvD
JMmMiY4VFzizuGqTZHiy/EtKXo1pq+fOcMEqSuaaDfcYgdHmLm0OIU12Ig==
=51xc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (178 commits)
platform/x86: x86-android-tablets: Add accelerometer support for Yoga Tablet 2 1050/830 series
platform/x86: x86-android-tablets: Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
platform/x86: x86-android-tablets: Add Wacom digitizer info for Lenovo Yoga Book
platform/x86: x86-android-tablets: Update Yoga Book HiDeep touchscreen comment
platform/x86: thinkpad_acpi: Fix Embedded Controller access on X380 Yoga
platform/x86/intel/sdsi: Change mailbox timeout
platform/x86/intel/pmt: Ignore uninitialized entries
platform/x86: amd: pmc: provide user message where s0ix is not supported
platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
mlxbf-bootctl: Add sysfs file for BlueField boot fifo
platform/x86: amd: pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3
platform/x86/amd: pmc: Move out of BIOS SMN pair for STB init
platform/x86/amd: pmc: Utilize SMN index 0 for driver probe
platform/x86/amd: pmc: Move idlemask check into `amd_pmc_idlemask_read`
platform/x86/amd: pmc: Don't dump data after resume from s0i3 on picasso
platform/x86/amd: pmc: Hide SMU version and program attributes for Picasso
platform/x86/amd: pmc: Don't try to read SMU version on Picasso
platform/x86/amd/pmf: Move out of BIOS SMN pair for driver probe
platform/x86: intel-uncore-freq: Add client processors
...
intel_pmc_core displays a warning when the module parameter
`warn_on_s0ix_failures` is set and a suspend didn't get to a HW sleep
state.
Report this to the standard kernel reporting infrastructure so that
userspace software can query after the suspend cycle is done.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently counters are only captured during suspend when the
warn_on_s0ix_failures module parameter is set.
In order to relay this counter information to the kernel reporting
infrastructure adjust it so that the counters are always captured.
warn_on_s0ix_failures will be utilized solely for messaging by
the driver instead.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fundamentally semaphores are a counted primitive, but
DEFINE_SEMAPHORE() does not expose this and explicitly creates a
binary semaphore.
Change DEFINE_SEMAPHORE() to take a number argument and use that in the
few places that open-coded it using __SEMAPHORE_INITIALIZER().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[mcgrof: add some tribal knowledge about why some folks prefer
binary sempahores over mutexes]
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
On some platforms, it may take up to 400ms for the ready bit to be set in a
successful mailbox transaction. Set the timeout to 500ms to cover the worst
case.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230413013230.1521584-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Intel Xeon, unused PMT regions will have uninitialized discovery headers
containing all 0xF. Instead of returning an error, just skip the region.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230413012922.1521377-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Meteor Lake, the GNA, IPU, and VPU devices are booted in D0 power state
and will block the SoC from going into the deepest Package C-state if a
driver is not present. Put each device in D3hot if no driver is found.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230409192535.914540-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make Intel uncore frequency driver support to client processor starting
from Alder Lake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230330145939.1022261-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call mutex_unlock(&isst_tpmi_dev_lock) before returning on this
error path.
Fixes: d805456c71 ("platform/x86: ISST: Enumerate TPMI SST and create framework")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/dcdebbb7-7de6-4d04-8e7a-43d5ca043484@kili.mountain
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Array BIST is the second test supported by IFS. Modify IFS doc
entry to be more general.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-9-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Array BIST test (for a particular core) is triggered by writing
to MSR_ARRAY_BIST from one sibling of the core.
This will initiate a test for all supported arrays on that
CPU. Array BIST test may be aborted before completing all the
arrays in the event of an interrupt or other reasons.
In this case, kernel will restart the test from that point
onwards. Array test will also be aborted when the test fails,
in which case the test is stopped immediately without further
retry.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-8-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The interface to trigger Array BIST test and obtain its result
is similar to the existing scan test. The only notable
difference is that, Array BIST doesn't require any test content
to be loaded. So binary load related options are not needed for
this test.
Add sysfs interface for array BIST test, the testing support will
be added by subsequent patch.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-7-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
