The PLL monitor is mentioned as a debug feature in the reference manual,
but there are some boards that use this clock output as a reference clock
for board level components. Add support for those clocks in the clock
driver, so this clock output can be used properly.
Note that the VIDEO1, GPU and VPU mux inputs are rotated compared to the
description in the reference manual. The order in this patch has been
empirically validated.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/clk/imx/clk-imx31.c:54:28: warning: ‘uart_clks’ defined but not used [-Wunused-const-variable=]
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since 5d283b0838 ("clk: imx6: Fix procedure to switch the parent
of LDB_DI_CLK"), the clock driver warns if ldb_di\d_sel is changed
from reset value on system boot. This warning is printed even if
the bootloader (or a previous kernel that did kexec) followed the
correct procedure for glitch-free reparenting.
As such systems are doing everything correctly, a warning is too
harsh. Demote to a notice, so users are still alerted, but without
cluttering a loglevel=5 boot.
While at it, add the words "possible glitch" into the log message, to
make it more user-friendly.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Build fix for CONFIG_PM=n in the mmp2 driver
- Kconfig warning for unmet dependencies in the i.MX driver
- Make the camera AHB clk always be enabled on qcom sc7180
- Use rate round down semantics for qcom sm8250 SD clks
-----BEGIN PGP SIGNATURE-----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=wIlb
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes:
- Build fix for CONFIG_PM=n in the mmp2 driver
- Kconfig warning for unmet dependencies in the i.MX driver
- Make the camera AHB clk always be enabled on qcom sc7180
- Use rate round down semantics for qcom sm8250 SD clks"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mmp2: fix build without CONFIG_PM
clk: qcom: gcc-sm250: Use floor ops for sdcc clks
clk: imx: fix Kconfig warning for i.MX SCU clk
clk: qcom: gcc-sc7180: Mark the camera abh clock always ON
While the clocks are fairly similar to the H6, many differ in tiny
details, so a separate clock driver seems indicated.
Derived from the H6 clock driver, and adjusted according to the manual.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210127172500.13356-4-andre.przywara@arm.com
The clocks itself are identical to the H6 R-CCU, it's just that the H616
has not all of them implemented (or connected).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210127172500.13356-3-andre.przywara@arm.com
Fixes the following W=1 kernel build warning(s):
drivers/clk/renesas/renesas-cpg-mssr.c:168: warning: Function parameter or member 'smstpcr_saved' not described in 'cpg_mssr_priv'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210126124540.3320214-12-lee.jones@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The clock API splits its interface into sleepable ant atomic contexts:
- clk_prepare/clk_unprepare for stuff that might sleep
- clk_enable_clk_disable for anything that may be done in atomic context
The code handling runtime PM for clocks only calls clk_disable() on
suspend requests, and clk_enable on resume requests. This means that
runtime PM with clock providers that only have the prepare/unprepare
methods implemented is basically useless.
Many clock implementations can't accommodate atomic contexts. This is
often the case when communication with the clock happens through another
subsystem like I2C or SCMI.
Let's make the clock PM code useful with such clocks by safely invoking
clk_prepare/clk_unprepare upon resume/suspend requests. Of course, when
such clocks are registered with the PM layer then pm_runtime_irq_safe()
can't be used, and neither pm_runtime_suspend() nor pm_runtime_resume()
may be invoked in atomic context.
For clocks that do implement the enable and disable methods then
everything just works as before.
A note on sparse:
According to https://lwn.net/Articles/109066/ there are things
that sparse can't cope with. In particular, pm_clk_op_lock() and
pm_clk_op_unlock() may or may not lock/unlock psd->lock depending on
some runtime condition. To work around that we tell it the lock is
always untaken for the purpose of static analisys.
Thanks to Naresh Kamboju for reporting issues with the initial patch.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes the following W=1 kernel build warning(s):
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'name' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'parent_names' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'num_parents' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'base' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'muxdiv_offset' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'mux_shift' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'mux_width' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'mux_flags' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'div_shift' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'div_width' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'div_flags' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'gate_offset' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'gate_shift' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'gate_flags' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'flags' not described in 'rockchip_clk_register_halfdiv'
drivers/clk/rockchip/clk-half-divider.c:168: warning: Function parameter or member 'lock' not described in 'rockchip_clk_register_halfdiv'
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-5-lee.jones@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fixes the following W=1 kernel build warning(s):
drivers/clk/rockchip/clk-pll.c:104: warning: Function parameter or member 'i' not described in 'RK3036_PLLCON'
drivers/clk/rockchip/clk-pll.c:365: warning: Function parameter or member 'nr' not described in 'RK3066_PLL_RESET_DELAY'
drivers/clk/rockchip/clk-pll.c:584: warning: Function parameter or member 'i' not described in 'RK3399_PLLCON'
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-4-lee.jones@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fixes the following W=1 kernel build warning(s):
drivers/clk/rockchip/clk-cpu.c:65: warning: Function parameter or member 'cpu_mux' not described in 'rockchip_cpuclk'
drivers/clk/rockchip/clk-cpu.c:65: warning: Function parameter or member 'cpu_mux_ops' not described in 'rockchip_cpuclk'
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-3-lee.jones@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fixes the following W=1 kernel build warning(s):
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'name' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'parent_names' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'num_parents' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'base' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'muxdiv_offset' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'mux_shift' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'mux_width' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'mux_flags' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'div_offset' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'div_shift' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'div_width' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'div_flags' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'div_table' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'gate_offset' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'gate_shift' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'gate_flags' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'flags' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:45: warning: Function parameter or member 'lock' not described in 'rockchip_clk_register_branch'
drivers/clk/rockchip/clk.c:180: warning: Function parameter or member 'hw' not described in 'rockchip_fractional_approximation'
drivers/clk/rockchip/clk.c:180: warning: Function parameter or member 'rate' not described in 'rockchip_fractional_approximation'
drivers/clk/rockchip/clk.c:180: warning: Function parameter or member 'parent_rate' not described in 'rockchip_fractional_approximation'
drivers/clk/rockchip/clk.c:180: warning: Function parameter or member 'm' not described in 'rockchip_fractional_approximation'
drivers/clk/rockchip/clk.c:180: warning: Function parameter or member 'n' not described in 'rockchip_fractional_approximation'
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210120093040.1719407-2-lee.jones@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
While comparing clocks between the H6 and H616, some of the M factor
ranges were found to be wrong: the manual says they are only covering
two bits [1:0], but our code had "5" in the number-of-bits field.
By writing 0xff into that register in U-Boot and via FEL, it could be
confirmed that bits [4:2] are indeed masked off, so the manual is right.
Change to number of bits in the affected clock's description.
Fixes: 524353ea48 ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210118000912.28116-1-andre.przywara@arm.com
Fixes the following W=1 kernel build warning(s):
drivers/clk/sunxi/clk-mod0.c:24: warning: Function parameter or member 'req' not described in 'sun4i_a10_get_mod0_factors'
Cc: "Emilio López" <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210120093040.1719407-19-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/clk/sunxi/clk-sunxi.c:34: warning: Function parameter or member 'req' not described in 'sun4i_get_pll1_factors'
drivers/clk/sunxi/clk-sunxi.c:81: warning: Function parameter or member 'req' not described in 'sun6i_a31_get_pll1_factors'
drivers/clk/sunxi/clk-sunxi.c:158: warning: Function parameter or member 'req' not described in 'sun8i_a23_get_pll1_factors'
drivers/clk/sunxi/clk-sunxi.c:202: warning: Function parameter or member 'req' not described in 'sun4i_get_pll5_factors'
drivers/clk/sunxi/clk-sunxi.c:229: warning: Function parameter or member 'req' not described in 'sun6i_a31_get_pll6_factors'
drivers/clk/sunxi/clk-sunxi.c:250: warning: Function parameter or member 'req' not described in 'sun5i_a13_get_ahb_factors'
drivers/clk/sunxi/clk-sunxi.c:289: warning: Function parameter or member 'req' not described in 'sun6i_get_ahb1_factors'
drivers/clk/sunxi/clk-sunxi.c:328: warning: Function parameter or member 'req' not described in 'sun6i_ahb1_recalc'
drivers/clk/sunxi/clk-sunxi.c:346: warning: Function parameter or member 'req' not described in 'sun4i_get_apb1_factors'
drivers/clk/sunxi/clk-sunxi.c:385: warning: Function parameter or member 'req' not described in 'sun7i_a20_get_out_factors'
drivers/clk/sunxi/clk-sunxi.c:415: warning: cannot understand function prototype: 'const struct clk_factors_config sun4i_pll1_config = '
drivers/clk/sunxi/clk-sunxi.c:724: warning: cannot understand function prototype: 'struct div_data '
drivers/clk/sunxi/clk-sunxi.c:945: warning: Function parameter or member 'node' not described in 'sunxi_divs_clk_setup'
drivers/clk/sunxi/clk-sunxi.c:945: warning: Function parameter or member 'data' not described in 'sunxi_divs_clk_setup'
Cc: "Emilio López" <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210120093040.1719407-15-lee.jones@linaro.org
pm_clk_suspend()/pm_clk_resume() are defined as NULL pointers rather than
empty inline stubs without CONFIG_PM:
drivers/clk/mmp/clk-audio.c:402:16: error: called object type 'void *' is not a function or function pointer
pm_clk_suspend(dev);
drivers/clk/mmp/clk-audio.c:411:15: error: called object type 'void *' is not a function or function pointer
pm_clk_resume(dev);
I tried redefining the helper functions, but that caused additional
problems. This is the simple solution of replacing the __maybe_unused
trick with an #ifdef.
Fixes: 725262d291 ("clk: mmp2: Add audio clock controller driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210103135503.3668784-1-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Followup to the commits 5e4b7e82d4 ("clk: qcom: gcc-sdm845: Use floor
ops for sdcc clks") and 6d37a8d192 ("clk: qcom: gcc-sc7180: Use floor ops
for sdcc clks"). Use floor ops for sdcc clocks on sm8250.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 3e5770921a ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Link: https://lore.kernel.org/r/20210109013314.3443134-1-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
A previous patch introduced a harmless randconfig warning:
WARNING: unmet direct dependencies detected for MXC_CLK_SCU
Depends on [n]: COMMON_CLK [=y] && ARCH_MXC [=n] && IMX_SCU [=y] && HAVE_ARM_SMCCC [=y]
Selected by [m]:
- CLK_IMX8QXP [=m] && COMMON_CLK [=y] && (ARCH_MXC [=n] && ARM64 [=y] || COMPILE_TEST [=y]) && IMX_SCU [=y] && HAVE_ARM_SMCCC [=y]
Since the symbol is now hidden and only selected by other symbols,
just remove the dependencies and require the other drivers to
get it right.
Fixes: 6247e31b75 ("clk: imx: scu: fix MXC_CLK_SCU module build break")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201230155244.981757-1-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The camera clock controller requires the AHB clock, the driver when
moved to use the pm_runtime_get() API, the camera ahb clock failed turn
on before access, thus mark it as always ON.
Reported-by: Stephen Boyd <sboyd@kernel.org>
Fixes: 8d4025943e ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1608573816-1465-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Current implementation defaults the hda clocks to clk_m. This causes hda
to run too slow to operate correctly. Fix this by defaulting to pll_p and
setting the frequency to the correct rate.
This matches upstream t124 and downstream t30.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-2-pgwipeout@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
R-Car V3U has a CPG different enough to not be a generic Gen3 CPG but
similar enough to reuse code. Introduce a new CPG library, factor out
the SD clock handling and hook it to the generic Gen3 CPG driver so we
have an equal state. V3U will make use of it in the next patch then.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20201227174202.40834-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
We want to reuse SD clock handling for other SoCs and, thus, need to
generalize it. So, don't access cpg_quirks in that realm.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20201227174202.40834-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the module clocks used by the Pin Function Controller (PFC) and
General Purpose Input/Output (GPIO) blocks, and their parent clock CP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20201019120614.22149-4-geert+renesas@glider.be
According to Figure 8.1.1 ("Block Diagram of CPG (R-Car V3U-AD)") in the
R-Car V3U Series User's Manual Rev. 0.5, the parent of the CBFUSA clock
is EXTAL.
Fixes: 17bcc8035d ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20201019120614.22149-3-geert+renesas@glider.be
The S2 internal core clock does not exist on R-Car V3U. Remove it.
Fixes: 17bcc8035d ("clk: renesas: cpg-mssr: Add support for R-Car V3U")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20201019120614.22149-2-geert+renesas@glider.be
The CEC clock on the H6 SoC is a bit special, since it uses a fixed
pre-dividier for one source clock (the PLL), but conveys the other clock
(32K OSC) directly.
We are using a fixed predivider array for that, but fail to use the right
flag to actually activate that.
Fixes: 524353ea48 ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Reported-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210106143246.11255-1-andre.przywara@arm.com
While no information about the H6 RSB controller is included in the
datasheet or manual, the vendor BSP and power management blob both
reference the RSB clock parent and register address. These values were
verified by experimentation.
Since this clock/reset are added late, the specifier is added at the end
to maintain the existing DT binding. The code is kept in register order.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add modularization support to the Tegra124 EMC driver, which now can be
compiled as a loadable kernel module.
Note that EMC clock must be registered at clk-init time, otherwise PLLM
will be disabled as unused clock at boot time if EMC driver is compiled
as a module. Hence add a prepare/complete callbacks. similarly to what is
done for the Tegra20/30 EMC drivers.
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201228154920.18846-2-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This patch corrects display clocks for i.MX8qxp DC0 subsystem by
calling imx_clk_scu2() to register them, instead of calling
imx_clk_scu(). The reason is that the clocks can source from
various parents. The clock source selection is controlled by
Distributed Slave System Controller(DSC). According to the DSC spec,
the below table describes the generic source selections for clocks
with the same type in various subsystems. And, the display controller
subsystem spec says the display clocks can source from PLL1, PLL2 or
bypass clock, thus we may specify the correct parents for imx_clk_scu2().
The bypass clock's parent is determined by the SCU firmware.
Currently, the parent is 'pixel_link_clk_in' from HW point of view.
To be more specific, the parent is dummy for i.MX8qxp DC0, while
HDMI TX PHY PLL for i.MX8qm DC0. In practice, the display clocks
source from the bypass clock only when driving i.MX8qm HDMI TX.
So, for the both display clocks, we simply specify 'dc0_bypass0_clk'
bypass clock as a valid parent.
-----------------------------------------
| src_sel[28:26] | |
-----------------------------------------
| 0x0 | xtal24M |
| 0x1 | PLL0 |
| 0x2 | PLL1 |
| 0x3 | PLL2 |
| 0x4 | bypass reference clock |
| 0x5 to 0x7 | reserved |
-----------------------------------------
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The XTAL clock is provided via .dts since Linux 5.6. Remove
compatibility code for .dtbs which are older than that.
The switch to the HHI syscon has been done with Linux 5.1. Also remove
any code needed to support .dtbs that have not switched to the HHI
syscon yet.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201221183624.932649-2-martin.blumenstingl@googlemail.com
Popagate the error code from meson_clk_pll_set_rate() when the PLL does
not lock with the new settings.
Fixes: 722825dcd5 ("clk: meson: migrate plls clocks to clk_regmap")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-4-martin.blumenstingl@googlemail.com
The error codes returned by meson_clk_get_pll_settings() are all
negative. Make "ret" a signed integer in meson_clk_pll_set_rate() to
make it match with the clk_ops.set_rate API as well as the data type
returned by meson_clk_get_pll_settings().
Fixes: 8eed1db1ad ("clk: meson: pll: update driver for the g12a")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-3-martin.blumenstingl@googlemail.com
The "rate" parameter in meson_clk_pll_set_rate() contains the new rate.
Retrieve the old rate with clk_hw_get_rate() so we don't inifinitely try
to switch from the new rate to the same rate again.
Fixes: 7a29a86943 ("clk: meson: Add support for Meson clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-2-martin.blumenstingl@googlemail.com
