The SoCFGPA gate clock implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.
This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidates to
trigger that parent change are either the assigned-clock-parents device
tree property or a call to clk_set_rate(), with determine_rate()
figuring out which parent is the best suited for a given rate.
The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.
Similarly, it doesn't look like the device tree using that clock driver
uses any of the assigned-clock properties on that clock.
So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().
The latter case would be equivalent to setting the determine_rate
implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no
determine_rate implementation is provided, clk_round_rate() (through
clk_core_round_rate_nolock()) will call itself on the parent if
CLK_SET_RATE_PARENT is set, and will not change the clock rate
otherwise.
And if it was an oversight, then we are at least explicit about our
behavior now and it can be further refined down the line.
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-32-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The function of_clk_add_provider() has been deprecated, so use its
suggested replacement of_clk_add_hw_provider() instead.
Since of_clk_add_hw_provider() can fail, like of_clk_add_provider(),
check its return value and do the error handling.
The err variable unnecessarily duplicates the functionality of the
rc variable, so it has been removed.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Link: https://lore.kernel.org/r/20221209152913.1335068-4-marpagan@redhat.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
time around. The core framework is effectively unchanged, with the majority of
the diff going to the Qualcomm clk driver directory because they added two 3k
line files that are almost all clk data (Abel Vesa from Linaro tried to shrink
the number of lines down, but it doesn't seem to be possible without
sacrificing readability). The second big driver this time around is the
Rockchip rk3588 clk and reset unit, at _only_ 2.5k lines.
Ignoring the big clk drivers from the familiar SoC vendors, there's just a
bunch of little clk driver updates and fixes throughout here. It's the usual
set of clk data fixups to describe proper parents, or add frequencies to
frequency tables, or plug memory leaks when function calls fail. Also, some
drivers are converted to use modern clk_hw APIs, which is always nice to see.
And data is deduplicated, leading to a smaller kernel Image. Overall this batch
has a larger collection of cleanups than it typically does. Maybe that means
there are less new SoCs right now that need supporting, and the focus has
shifted to quality and reliability. I can dream.
New Drivers:
- Frequency hopping controller hardware on MediaTek MT8186
- Global clock controller for Qualcomm SM8550
- Display clock controller for Qualcomm SC8280XP
- RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
- CPU PLL on MStar/SigmaStar SoCs
- Support for the clock and reset unit of the Rockchip rk3588
Updates:
- Tracepoints for clk_rate_request structures
- Debugfs support for fractional divider clk
- Make MxL's CGU driver secure compatible
- Ingenic JZ4755 SoC clk support
- Support audio clks on X1000 SoCs
- Remove flags from univ/main/syspll child fixed factor clocks across
MediaTek platforms
- Fix clock dependency for ADC on MediaTek MT7986
- Fix parent for FlexSPI clock for i.MX93
- Add USB suspend clock on i.MX8MP
- Unmap anatop base on error for i.MX93 driver
- Change enet clock parent to wakeup_axi_root for i.MX93
- Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
- Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
- Add 320MHz and 640MHz entries to PLL146x
- Add audio shared gate and SAI clocks for i.MX8MP
- Fix a possible memory leak in the error path of rockchip PLL creation
- Fix header guard for V3S clocks
- Add IR module clock for f1c100s
- Correct the parent clocks for the (High Speed) Serial Communication
Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
Switch clocks on Renesas R-Car S4-8
- Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
R-Car V4H
- Two PLL driver fixups for the Amlogic clk driver
- Round SD clock rate to improve parent clock selection
- Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
S4-8
- Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX) serial
(SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI (RPC-IF) clocks
on Renesas R-Car V4H
- Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
Renesas RZ/G2L
- Fix endless loop on Renesas RZ/N1
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
Note: HSCIF0 is used for the serial console on the White-Hawk
development board
- Various clk DT binding improvements and conversions to YAML
- Qualcomm SM8150/SM8250 display clock controller cleaned up
- Some missing clocks for Qualcomm SM8350 added
- Qualcomm MSM8974 Global and Multimedia clock controllers transitioned
to parent_data and parent_hws
- Use parent_data and add network resets for Qualcomm IPQ8074
- Qualcomm Krait clock controller modernized
- Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
controllers
- Enable retention mode on Qualcomm SM8250 USB GDSCs
- Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
clocks which definition could be shared between platforms
- Various NULL pointer checks added for allocations
-----BEGIN PGP SIGNATURE-----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=6vbl
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver updates from Stephen Boyd:
"A pile of clk driver updates with a small tracepoint patch to the clk
core this time around.
The core framework is effectively unchanged, with the majority of the
diff going to the Qualcomm clk driver directory because they added two
3k line files that are almost all clk data (Abel Vesa from Linaro
tried to shrink the number of lines down, but it doesn't seem to be
possible without sacrificing readability).
The second big driver this time around is the Rockchip rk3588 clk and
reset unit, at _only_ 2.5k lines.
Ignoring the big clk drivers from the familiar SoC vendors, there's
just a bunch of little clk driver updates and fixes throughout here.
It's the usual set of clk data fixups to describe proper parents, or
add frequencies to frequency tables, or plug memory leaks when
function calls fail. Also, some drivers are converted to use modern
clk_hw APIs, which is always nice to see. And data is deduplicated,
leading to a smaller kernel Image.
Overall this batch has a larger collection of cleanups than it
typically does. Maybe that means there are less new SoCs right now
that need supporting, and the focus has shifted to quality and
reliability. I can dream.
New Drivers:
- Frequency hopping controller hardware on MediaTek MT8186
- Global clock controller for Qualcomm SM8550
- Display clock controller for Qualcomm SC8280XP
- RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
- CPU PLL on MStar/SigmaStar SoCs
- Support for the clock and reset unit of the Rockchip rk3588
Updates:
- Tracepoints for clk_rate_request structures
- Debugfs support for fractional divider clk
- Make MxL's CGU driver secure compatible
- Ingenic JZ4755 SoC clk support
- Support audio clks on X1000 SoCs
- Remove flags from univ/main/syspll child fixed factor clocks across
MediaTek platforms
- Fix clock dependency for ADC on MediaTek MT7986
- Fix parent for FlexSPI clock for i.MX93
- Add USB suspend clock on i.MX8MP
- Unmap anatop base on error for i.MX93 driver
- Change enet clock parent to wakeup_axi_root for i.MX93
- Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
- Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
- Add 320MHz and 640MHz entries to PLL146x
- Add audio shared gate and SAI clocks for i.MX8MP
- Fix a possible memory leak in the error path of rockchip PLL
creation
- Fix header guard for V3S clocks
- Add IR module clock for f1c100s
- Correct the parent clocks for the (High Speed) Serial Communication
Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
Switch clocks on Renesas R-Car S4-8
- Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
R-Car V4H
- Two PLL driver fixups for the Amlogic clk driver
- Round SD clock rate to improve parent clock selection
- Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
S4-8
- Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX)
serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI
(RPC-IF) clocks on Renesas R-Car V4H
- Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
Renesas RZ/G2L
- Fix endless loop on Renesas RZ/N1
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
Note: HSCIF0 is used for the serial console on the White-Hawk
development board
- Various clk DT binding improvements and conversions to YAML
- Qualcomm SM8150/SM8250 display clock controller cleaned up
- Some missing clocks for Qualcomm SM8350 added
- Qualcomm MSM8974 Global and Multimedia clock controllers
transitioned to parent_data and parent_hws
- Use parent_data and add network resets for Qualcomm IPQ8074
- Qualcomm Krait clock controller modernized
- Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
controllers
- Enable retention mode on Qualcomm SM8250 USB GDSCs
- Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
clocks which definition could be shared between platforms
- Various NULL pointer checks added for allocations"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits)
clk: nomadik: correct struct name kernel-doc warning
clk: lmk04832: fix kernel-doc warnings
clk: lmk04832: drop superfluous #include
clk: lmk04832: drop unnecessary semicolons
clk: lmk04832: declare variables as const when possible
clk: socfpga: Fix memory leak in socfpga_gate_init()
clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
clk: st: Fix memory leak in st_of_quadfs_setup()
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
clk: Add trace events for rate requests
clk: Store clk_core for clk_rate_request
clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: mmcc-msm8974: move clock parent tables down
clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: gcc-msm8974: move clock parent tables down
clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
...
Free @socfpga_clk and @ops on the error path to avoid memory leak issue.
Fixes: a30a67be7b ("clk: socfpga: Don't have get_parent for single parent ops")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123031622.63171-1-xiujianfeng@huawei.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Now that the SDMMC driver supports setting the clk-phase, we can remove
the need to do it in the clock driver.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221114230217.202634-5-dinguyen@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The assignment operation after a & mask operation is redundant, the
variables being assigned are not used afterwards. Replace the &=
operator with just & operator.
Cleans up two clang-scan warnings:
drivers/clk/socfpga/clk-gate.c:37:10: warning: Although the value stored
to 'l4_src' is used in the enclosing expression, the value is never
actually read from 'l4_src' [deadcode.DeadStores]
return l4_src &= 0x1;
^ ~~~
drivers/clk/socfpga/clk-gate.c:46:10: warning: Although the value stored
to 'perpll_src' is used in the enclosing expression, the value is never
actually read from 'perpll_src' [deadcode.DeadStores]
return perpll_src &= 0x3;
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211230150321.167576-1-colin.i.king@gmail.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Use clk_hw pointers in socfpga driver
- Cleanup parent data in qcom clk drivers
* clk-cleanup:
clk: Drop double "if" in clk_core_determine_round_nolock() comment
clk: at91: Trivial typo fixes in the file sama7g5.c
clk: use clk_core_enable_lock() a bit more
* clk-renesas:
clk: renesas: Zero init clk_init_data
clk: renesas: Couple of spelling fixes
clk: renesas: r8a779a0: Add CMT clocks
clk: renesas: r8a7795: Add TMU clocks
clk: renesas: r8a779a0: Add TSC clock
clk: renesas: r8a779a0: Add TMU clocks
clk: renesas: r8a77965: Add DAB clock
clk: renesas: r8a77990: Add DAB clock
* clk-socfpga:
clk: socfpga: remove redundant initialization of variable div
clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return
clk: socfpga: Fix code formatting
clk: socfpga: Convert to s10/agilex/n5x to use clk_hw
clk: socfpga: arria10: convert to use clk_hw
clk: socfpga: use clk_hw_register for a5/c5
* clk-allwinner:
clk: sunxi: Demote non-conformant kernel-doc headers
clk: sunxi-ng: v3s: use sigma-delta modulation for audio-pll
* clk-qcom: (45 commits)
clk: qcom: rpmh: add support for SDX55 rpmh IPA clock
clk: qcom: gcc-sdm845: get rid of the test clock
clk: qcom: convert SDM845 Global Clock Controller to parent_data
dt-bindings: clock: separate SDM845 GCC clock bindings
clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-sm8250: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-sm8150: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-sc8180x: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-sc7180: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: videocc-sm8250: use parent_hws where possible
clk: qcom: videocc-sm8150: use parent_hws where possible
clk: qcom: gpucc-sm8250: use parent_hws where possible
clk: qcom: gpucc-sm8150: use parent_hws where possible
clk: qcom: gcc-sm8350: use parent_hws where possible
clk: qcom: gcc-sm8250: use parent_hws where possible
clk: qcom: gcc-sm8150: use parent_hws where possible
clk: qcom: gcc-sdx55: use parent_hws where possible
...
As recommended by Stephen Boyd, convert the cyclone5/arria5 clock driver
to use the clk_hw registration method.
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210302214151.1333447-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pointers should be cast with uintptr_t instead of integer. This fixes
warning when compile testing on ARM64:
drivers/clk/socfpga/clk-gate.c: In function ‘socfpga_clk_recalc_rate’:
drivers/clk/socfpga/clk-gate.c:102:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Fixes: b7cec13f08 ("clk: socfpga: Look for the GPIO_DB_CLK by its offset")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210314110709.32599-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-7-sboyd@kernel.org
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver creates a gate clk with the possibility to have multiple
parents. That can cause problems if the common clk framework tries to
call the get_parent() op and gets back a number that's larger than the
number of parents the clk says it supports in
clk_init_data::num_parents. Let's duplicate the clk_ops structure each
time this function is called and drop the get/set parent ops when there
is only one parent. This allows the framework to consider a number
larger than clk_init_data::num_parents as an error condition of the
get_parent() clk op, clearing the way for proper code.
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the code to use GENMASK() helper instead of div_mask() macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. The clkdev.h include isn't used either, remove
it and add in slab.h to make sure things keep compiling.
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Use of_clk_parent_fill to fill in the parent clock's array.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
There are 5 possible parent clocks for the SoCFPGA Arria10. Move the define
SYSMGR_SDMMC_CTRL_SET and streq() to clk.h so that the Arria clock driver
can use.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The C0(mpu_clk), C1(main_clk), and C2(dbg_base_clk) outputs from the main
PLL go through a pre-divider before coming into the system. These registers
were hidden for the CycloneV platform, but are now used for the ArriaV
platform.
This patch updates the clock driver to read the div-reg property for the
socfpga-periph-clk clocks. Also moves the div_mask define to clk.h for re-use.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
The clk-phase property is used to represent the 2 clock phase values that is
needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will
use the syscon driver to set sdmmc_clk's phase shift that is located in the
system manager.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
---
v9: none
v8: Use degrees in the clk-phase binding property
v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a
prepare function to the gate clk that will toggle clock phase setting.
Remove the "altr,socfpga-sdmmc-sdr-clk" clock type.
v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to
set the phase shift settings.
v5: Use the "snps,dw-mshc" binding
v4: Use the sdmmc_clk prepare function to set the phase shift settings
v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is
loaded after the clock driver.
v2: Use the syscon driver
Move the different kinds of clocks into their own files. The reason is to aid
readability of the code. This also goes along with the other SoC-specific
clock drivers.
The split introduces new structs for the three types of clocks and uses them.
Other changes are not done to the code.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
