new member introduced in umc_info v3_3 to indicate
ECC capability
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Export new data in the metrics table for gfx and memory
utilization counter, and each hbm temperature as well.
v2:
change the metrics table version to v1.1
v3:
fix the coding style
v4:
rebase against latest kernel
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MEC firmware can silently fail the queue preemption request
without time out. In this case, HIQ's MQD's queue_doorbell_id
will be set. Check this field to see whether last queue preemption
was successful or not.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Suggested-by: Jay Cornwall <Jay.Cornwall@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Performance Determinism is a new mode in Aldebaran where PMFW tries to
maintain sustained performance level. It can be enabled on a per-die
basis on aldebaran. To guarantee that it remains within the power cap,
a max GFX frequency needs to be specified in this mode. A new
power_dpm_force_performance_level, "perf_determinism", is defined to enable
this mode in amdgpu. The max frequency (in MHz) can be specified through
pp_dpm_sclk. The mode will be disabled once any other performance level
is chosen.
Ex: To enable perf determinism at 900Mhz max gfx clock
echo perf_determinism > /sys/bus/pci/devices/.../power_dpm_force_performance_level
echo max 900 > /sys/bus/pci/devices/.../pp_dpm_sclk
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
0x61 is assigned to HBM2E in atom_dgpu_vram_type.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For ASICs that don't support ip discovery feature, query
gfx configuration through atomfirmware interface, rather
than gpu_info firmware.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Client ID 26 is reserved. Add it to the table.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This gives more information and improves productivity.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: re-use arct ip base offset array for aldebaran (Le)
v2: create aldebaran ip base offset array for major ip
blocks (Hawking)
v3: re-use arct VCN ip base offset array for aldebaran
(James)
v4: correct MP1 ip base offset array (Hawking)
v5: update VCN ip base offset array to aldebaran one
(Hawking)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The register mmOTG1_OTG_BLANK_CONTROL was missing BASE_IDX value.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
We use DMCUB outbox0 interrupt to log DMCUB trace buffer events
as Linux kernel traces, so need to add some irq source related
defination in the header files;
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To make sure they are naturally aligned. Also updating the
data type for link_speed/width for future PCIE5 support.
V2: define new structures with minor version bumped
V3: update data type of energy_accumulator as 64bit and
drop unnecessary padding members
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: updated to include new clocks vclk, dclk, od_vddgfx_offset, od_cclk
Added forward declaration for function smu_force_smuclk_levels to resolve clash with other commits
Resolved context clashes with other commits and v3 updates to patches 0003, 0004
v2: fix errors flagged by checkpatch
New Functions
smu_bump_power_profile_mode() - changes profile mode assuming calling function already has mutex
smu_force_ppclk_levels() - accepts Powerplay enum pp_clock_type to specify clock to change
smu_print_ppclk_levels() - accepts Powerplay enum pp_clock_type to request clock levels
amdgpu_get_pp_dpm_clock() - accepts Powerplay enum pp_clock_type to request clock levels and allows
all the amdgpu_get_pp_dpm_$CLK functions to have a single codepath
amdgpu_set_pp_dpm_clock() - accepts Powerplay enum pp_clock_type to set clock levels and allows
all the amdgpu_set_pp_dpm_$CLK functions to have a single codepath
Modified Functions
smu_force_smuclk_levels - changed function name to make clear difference to smu_force_ppclk_levels
smu_force_ppclk_levels() - modifed signature to implement Powerplay API force_clock_level
- calls smu_force_smuclk_levels
smu_print_smuclk_levels - changed function name to make clear difference to smu_print_ppclk_levels
smu_print_ppclk_levels() - modifed signature to implement Powerplay API force_clock_level
- calls smu_print_smuclk_levels
smu_sys_get_gpu_metrics - modifed arg0 to match Powerplay API get_gpu_metrics
smu_get_power_profile_mode - modifed arg0 to match Powerplay API get_power_profile_mode
smu_set_power_profile_mode - modifed arg0 to match Powerplay API set_power_profile_mode
- removed arg lock_needed, mutex always locked, internal functions
can call smu_bump if they already hold lock
smu_switch_power_profile - now calls smu_bump as already holds mutex lock
smu_adjust_power_state_dynamic - now calls smu_bump as already holds mutex lock
amdgpu_get_pp_od_clk_voltage - uses smu_print_ppclk_levels
amdgpu_{set,get}_pp_dpm_$CLK - replace logic with call helper function amdgpu_{set,get}_pp_dpm_clock()
CLK ={sclk, mclk, socclk, fclk, dcefclk, pci, vclkd, dclk}
Other Changes
added 5 smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling in pm functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DCS
V1: Enable Async DCS.
V2: Add the ppfeaturemask bit to enable from the modprobe parameter.
V3:
1. add the flag to skip APU support.
2. remove the hunk for workload selection since
it doesn't impact the function.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add PCIE_SPEED_32_0GT and PCIE GEN5 support for amdgpu.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:226:29: warning: ‘UVD0_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:219:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:212:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:205:29: warning: ‘THM_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:198:29: warning: ‘SMUIO_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:191:29: warning: ‘SDMA0_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:184:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:177:29: warning: ‘OSSSYS_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:172:29: warning: ‘DCN_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:165:29: warning: ‘NBIF0_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:158:29: warning: ‘MP1_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:151:29: warning: ‘MP0_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:144:29: warning: ‘MMHUB_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:137:29: warning: ‘L2IMU0_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:130:29: warning: ‘ISP_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:123:29: warning: ‘IOHC0_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:116:29: warning: ‘HDP_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:109:29: warning: ‘HDA_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:102:29: warning: ‘GC_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:95:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:88:29: warning: ‘DPCS_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:81:29: warning: ‘DMU_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:74:29: warning: ‘DIO_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:67:29: warning: ‘DF_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:60:29: warning: ‘DBGU_IO0_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:53:29: warning: ‘CLK_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:46:29: warning: ‘ATHUB_BASE’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../include/renoir_ip_offset.h:39:29: warning: ‘ACP_BASE’ defined but not used [-Wunused-const-variable=]
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to implement the processor fine grain feature for vangogh.
It's similar with gfx clock, the only difference is below:
echo "p core_id level value" > pp_od_clk_voltage
1. "p" - set the cclk (processor) frequency
2. "core_id" - 0/1/2/3, represents which cpu core you want to select
2. "level" - 0 or 1, "0" represents the min value, "1" represents the
max value
3. "value" - the target value of cclk frequency, it should be limited in
the safe range
v2: fix some missing changes as Evan's suggestion.
v3: add version check and fix the restore.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The core processor clocks will be stored in smu metric table, then we
add this runtime information into amdgpu_pm_info interface.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is supported by Sienna Cichlid, Navy Flounder and Dimgrey
Cavefish. For these ASICs, the target voltage calculation can be
illustrated by "voltage = voltage calculated from v/f curve +
overdrive vddgfx offset".
V2: limit the smu_version check for Sienna Cichlid only
Here are some sample usages about this new OD setting:
1. Check current vddgfx offset setting by
cat /sys/class/drm/card0/device/pp_od_clk_voltage
...
...
OD_VDDGFX_OFFSET:
0mV
...
...
2. Set new vddgfx offset by
echo "vo 10" > /sys/class/drm/card0/device/pp_od_clk_voltage
cat /sys/class/drm/card0/device/pp_od_clk_voltage
...
...
OD_VDDGFX_OFFSET:
10mV
...
...
3. Commit the new setting by
echo "c" > /sys/class/drm/card0/device/pp_od_clk_voltage
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: add osssys v4_2 register offset and shift masks
header files. vega20 and arcturus will refer to
these ip headers. (Hawking)
v2: clean up osssys v4_2 registers (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Used for determining 2ND_USB20PORT support from firmware_capability.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi12_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
NB: Snipped a few of these
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi14_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
NB: Snipped a few of these
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:227:29: warning: ‘DBGU_IO_BASE’ defined but not used [-Wunused-const-variable=]
227 | static const struct IP_BASE DBGU_IO_BASE ={ { { { 0x000001E0, 0x000125A0, 0x0040B400, 0, 0, 0 } },
| ^~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:127:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=]
127 | static const struct IP_BASE PCIE0_BASE ={ { { { 0x000128C0, 0x00411800, 0x04440000, 0, 0, 0 } },
| ^~~~~~~~~~
In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x000120A0, 0x00017400, 0x00401400, 0, 0, 0 } },
| ^~~~~~~~~
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In file included from drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:154:29: warning: ‘XDMA_BASE’ defined but not used [-Wunused-const-variable=
154 | static const struct IP_BASE XDMA_BASE ={ { { { 0x00003400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x00017400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
Fixes the following W=1 kernel build warning(s):
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Get internal display info from vbios and pass it to dmub fw to determine
if multiple display optmization is needed.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes nearly 400 warnings!
These structures are too widely used in too many varying
configurations to be split-up into different headers or moved into
source files.
Instead, we'll mark them as __maybe_unused which tells the compiler
that we're aware they're being included into source files which do not
make use of them - but we've looked into it, and it's okay.
Let's tidy-up whilst were here. Just alignment stuff.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi14_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:144:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=]
144 | static const struct IP_BASE PCIE0_BASE ={ { { { 0x00000000, 0x00000014, 0x00000D20, 0x00010400, 0x0241B000 } },
| ^~~~~~~~~~
NB: Snipped for brevity
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new amdgpu_gfx_state_change_set() funtion can support set GFX power
change status to D0/D3.
v2: squash in warning fix (Alex)
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we are using dcn3 reg headers for dcn302. The offsets are
different between the two so they need seperate headers.
Add dcn302 header files and use these instead of dcn3 header
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.11-2020-11-05:
amdgpu:
- Add initial support for Vangogh
- Add support for Green Sardine
- Add initial support for Dimgrey Cavefish
- Scatter/Gather display support for Renoir
- Updates for Sienna Cichlid
- Updates for Navy Flounder
- SMU7 power improvements
- Modifier support for gfx9+
- CI BACO fixes
- Arcturus SMU fixes
- Lots of code cleanups
- DC fixes
- Kernel doc fixes
- Add more GPU HW client information to page fault error logging
- MPO clock tuning for RV
- FP fixes for DCN3 on ARM and PPC
radeon:
- Expose voltage via hwmon on Sumo APUs
amdkfd:
- Fix unique id handling
- Misc fixes
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105222749.201798-1-alexander.deucher@amd.com
This patch is to add vangogh apu flag to support more kickers that
belongs vangogh series.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
