pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210531135622.3348252-1-yukuai3@huawei.com
This is something that we've wanted for a while now: the ability to
actually look up the respective drm_device for a given drm_dp_aux struct.
This will also allow us to transition over to using the drm_dbg_*() helpers
for debug message printing, as we'll finally have a drm_device to reference
for doing so.
Note that there is one limitation with this - because some DP AUX adapters
exist as platform devices which are initialized independently of their
respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be
non-NULL until drm_dp_aux_register() has been called. We make sure to point
this out in the documentation for struct drm_dp_aux.
v3:
* Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com
Reviewed-by: Dave Airlie <airlied@redhat.com>
On x64 we get:
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c:751:10: warning: conversion from 'long unsigned int' to 'unsigned int' changes value from '18446744073709551613' to '4294967293' [-Woverflow]
The registers are 32 bit, so fix by casting to u32.
Fixes: fb43aa0acd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200929091918.24813-1-tomi.valkeinen@ti.com
Add J721E wrapper for mhdp, which sets up the clock and data muxes.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add a new DRM bridge driver for Cadence MHDP8546 DPTX IP used in TI J721E
SoC. MHDP DPTX IP is the component that complies with VESA DisplayPort (DP)
and embedded Display Port (eDP) standards. It integrates uCPU running the
embedded Firmware (FW) interfaced over APB interface.
Basically, it takes a DPI stream as input and outputs it encoded in DP
format. Currently, it supports only SST mode.
Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Co-developed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
