Support for multiple GT's within a single i915 device will be arriving
soon. Since each GT may have its own fusing and require different
workarounds, we need to make the GT workaround functions and multicast
steering setup per-gt.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917170845.836358-1-matthew.d.roper@intel.com
Blitter commands which do not have MOCS fields rely on
cacheability of BlitterCacheControlRegister which was mapped
to index 0 by default.Once we changed the MOCS value of
index 0 to L3 WB, tests like gem_linear_blits started failing
due to a change in cacheability from UC to WB.
Program and place the BlitterCacheControlRegister in
build_aux_regs().
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-4-ayaz.siddiqui@intel.com
Cache-control registers for Command Stream(CMD_CCTL) are used
to set catchability for memory writes and reads outputted by
Command Streamers on Gen12 onward platforms.
These registers need to point un-cached(UC) MOCS index.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-3-ayaz.siddiqui@intel.com
A recent restructuring of our context workaround list initialization
added an early return for non-render engines; this caused us to
potentially miss the wa_init_finish() call at the end of the function.
The mistake is pretty harmless --- the only impact is that non-render
engines on graphics version 12.50+ platforms we don't trim down the
workaround list to reclaim some memory, and we don't print the usual
"Initialized 1 context workaround" message in dmesg. Let's change the
early return to a jump down to the wa_init_finish() call at the bottom
of the function.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Fixes: 9e9dfd0802 ("drm/i915/dg2: Maintain backward-compatible nested batch behavior")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826033559.1209020-1-matthew.d.roper@intel.com
For tgl+, the per-context setting of MI_MODE[12] determines whether
the bits of a nested MI_BATCH_BUFFER_START instruction should be
interpreted in the traditional manner or whether they should
instead use a new tgl+ meaning that breaks backward compatibility, but
allows nesting into 3rd-level batchbuffers. For previous platforms,
the hardware default for this register bit is to maintain
backward-compatible behavior unless a context intentionally opts into
the new behavior; however Xe_HPG flips the hardware default behavior.
From a SW perspective, we want to maintain the backward-compatible
behavior for userspace, so we'll apply a fake workaround to set it back
to the legacy behavior on platforms where the hardware default is to
break compatibility. At the moment there is no Linux userspace that
utilizes third-level batchbuffers, so this will avoid userspace from
needing to make any changes. using the legacy meaning is the correct
thing to do. If/when we have userspace consumers that want to utilize
third-level batch nesting, we can provide a context parameter to allow
them to opt-in.
Bspec: 45974, 45718
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-9-matthew.d.roper@intel.com
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Rather than defining our shadow tables as a list of individual
registers, provide them as a list of register ranges; we'll have some
ranges of multiple registers being added soon (and we already have a
couple adjacent registers that we can squash into a single range now).
This change also defines the table with hex literal values rather than
symbolic register names; since that's how the tables are defined in the
bspec, this change will make it easier to review the tables overall.
v2:
- Force signed comparison on range overlap sanity check
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729152158.2646246-1-matthew.d.roper@intel.com
Although DG2_G10 platforms will always have all SQIDI's present and
don't need steering for registers in a SQIDI MMIO range, this isn't true
for DG2_G11 platforms; only SQIDI's 2 and 3 can be used on those.
We handle SQIDI ranges a bit differently from other types of explicit
steering. The SQIDI ranges belong to either the MCFG unit or the SF
unit, both of which have their own dedicated steering registers and do
not use the typical 0xFDC steering control that all other types of
ranges use. Thus we only need to worry about picking a valid initial
value for the MCFG and SF steering registers (0xFD0 and 0xFD8
respectively) at driver init; they won't change after we set them up so
we don't need to worry about re-steering them explicitly at runtime.
Given that any SQIDI value should work fine for DG2-G10 and XeHP SDV,
while only values of 2 and 3 are valid for DG2-G11, we'll just
initialize the MCFG and SF steering registers to a constant value of "2"
for all XeHP-based platforms for simplicity --- that will work in all
cases.
Bspec: 66534
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-6-matthew.d.roper@intel.com
Define and initialize the MMIO ranges for which XeHP SDV requires MSLICE
and LNCF steering.
Bspec: 66534
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-3-matthew.d.roper@intel.com
Xe_HP is more modular than its predecessors and as a consequence it has
more types of replicated registers. As with l3bank regions on previous
platforms, we may need to explicitly re-steer accesses to these new
types of ranges at runtime if we can't find a single default steering
value that satisfies the fusing of all types.
v2:
- Add a local 'i915' variable to reduce gt->i915 usage. (Caz)
- Drop unused 'intel_gt_read_register' prototype. (Caz)
v3:
- Drop unnecessary comment text. (Lucas)
- Drop unused register bit definition. (Lucas)
Bspec: 66534
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-2-matthew.d.roper@intel.com
There's a missing sentinel since we are not using ARRAY_SIZE(), but rather
checking that the .start is 0 to stop the iteration in mcr_range().
BUG: KASAN: global-out-of-bounds in mcr_range.isra.0+0x69/0xa0 [i915]
Read of size 4 at addr ffffffffa0889928 by task modprobe/3881
Fixes: d8905ba705 ("drm/i915/xehp: Define multicast register ranges")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730191115.2514581-1-lucas.demarchi@intel.com
The driver must provide GuC with a list of mmio registers
that should be saved/restored during a GuC-based engine reset.
Unfortunately, the list must be dynamically allocated as its size is
variable. That means the driver must generate the list twice - once to
work out the size and a second time to actually save it.
v2:
(Alan / CI)
- GEN7_GT_MODE -> GEN6_GT_MODE to fix WA selftest failure
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-16-matthew.brost@intel.com
Since we can't steer multicast register reads during ring-based
workaround verification, we need to define the multicast ranges where
failure to steer could potentially cause us to read back from a
fused-off register instance.
As with gen12, we can ignore the multicast ranges that the bspec
describes as 'SQIDI' since all instances of those registers will always
be present and we'll always be able to read back a workaround value that
was written with multicast.
Bspec: 66534
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714031540.3539704-11-matthew.d.roper@intel.com
Workarounds are documented in the bspec with an exclusive upper bound
(i.e., a "fixed" stepping that no longer needs the workaround). This
makes our driver's use of an inclusive upper bound for stepping ranges
confusing; the differing notation between code and bspec makes it very
easy for mistakes to creep in.
Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use
an exclusive upper bound like the bspec does. This also has the benefit
of helping make sure workarounds are properly handled for new minor
steppings that show up (e.g., an A1 between the A0 and B0 we already
knew about) --- if the new intermediate stepping pulls in hardware fixes
early, there will be an update to the workaround definition which lets
us know we need to change our code. If the new stepping does not pull a
hardware fix earlier, then the new stepping will already be captured
properly by the "[begin, fix)" range in the code.
We'll probably need to be extra vigilant in code review of new
workarounds for the near future to make sure developers notice the new
semantics of workaround bounds. But we just migrated a bunch of our
platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people
are already adjusting to the new macros and now is a good time to make
this change too.
[mattrope: Split out GT changes to apply through gt-next tree]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-8-matthew.d.roper@intel.com
DFR programming (which we enable as an optimization on gen11, but must
ensure is disabled on gen12) should be handled as a GT workaround rather
than clock gating initialization. This will ensure that the programming
of these registers is verified with our typical workaround checks.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-4-matthew.d.roper@intel.com
While doing a quick sanity check of the ICL workarounds in the driver I
noticed a few things that should be updated:
* There's no mention in the bspec that WaPipelineFlushCoherentLines
is needed on gen11 (both the current WA database and the old,
deprecated page 20196 were checked); it appears this might have just
been copied from the gen9 list? Even if this were needed, it doesn't
seem like this was the correct implementation anyway since the gen9
workaround is supposed to be implemented in the indirect context bb
(as we do in gen8_emit_flush_coherentl3_wa() on gen8/gen9).
* WaForwardProgressSoftReset does not appear in the current workaround
database. The old deprecated workaround list has a note indicating
the workaround was dropped in 2017, so we should be safe to drop it
from the code too.
While we're at it, add the formal workaround ID number to
WaDisableBankHangMode (our hardware team made a transition from
text-based workaround names to ID numbers partway through the
development of ICL, which is why some workarounds only have names, some
only have numbers, and some have both).
Bspec: 33450
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-3-matthew.d.roper@intel.com
On SKL we've been applying this workaround on H0+ steppings, which is
actually backwards; H0 is supposed to be the first stepping where the
workaround is no longer needed. Flip the bounds so that the workaround
applies to all steppings _before_ H0.
On BXT we've been applying this workaround to all steppings, but the
bspec tells us it's only needed until C0. Pre-C0 GT steppings only
appeared in pre-production hardware, which we no longer support in the
driver, so we can drop the workaround completely for this platform.
On ICL we've been applying this workaround to all steppings, but there
doesn't seem to be any indication that this workaround was ever needed
for this platform (even now-deprecated page 20196 of the bspec doesn't
mention it). We can go ahead and drop it.
I also don't see any mention of this workaround being needed for KBL,
although this may be an oversight since the workaround is needed for all
steppings of CFL. I'll leave the workaround in place for KBL to be
safe.
Bspec: 14091, 33450
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-2-matthew.d.roper@intel.com
The switch from old old IS_FOO_REVID() macros to the new table-based
IS_FOO_{GT,DISP}_STEP() macros is needed on both drm-intel-next (for
display-based DMC matching) and drm-intel-gt-next (for workaround
guards). To avoid conflicts, we'll apply the patches to a topic branch
and merge it to both intel branches to ensure the transition to the
new macros is clean.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
We're past the point at which we usually drop workarounds that were
never needed on production hardware. The driver will already print an
error and apply taint if loaded on pre-production hardware.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-13-matthew.d.roper@intel.com
Switch DG1 to use a revid->stepping table as we're trying to do on all
platforms going forward.
This removes the last use of IS_REVID() and REVID_FOREVER, so remove
those now-unused macros as well to prevent their accidental use on
future platforms.
v2:
- Use COMMON_STEP() macro in table. (Anusha)
Bspec: 44463
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com
Switch JSL/EHL to use a revid->stepping table as we're trying to do on
all platforms going forward.
v2:
- Use COMMON_STEP(). (Anusha)
Bspec: 29153
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-9-matthew.d.roper@intel.com
Switch ICL to use a revid->stepping table as we're trying to do on all
platforms going forward. While we're at it, let's include some
additional steppings that have popped up, even if we don't yet have any
workarounds tied to those steppings (we probably need to audit our
workaround list soon to see if any of the bounds have moved or if new
workarounds have appeared).
Note that the current bspec table is missing information about how to
map PCI revision ID to GT/display steppings; it only provides an SoC
stepping. The mapping to GT/display steppings (which aren't always the
same as the SoC stepping) used to be in the bspec, but was apparently
dropped during an update in Nov 2019; I've made my changes here based on
an older bspec snapshot that still had the necessary information. We've
requested that the missing information be restored.
I'm only including the production revids in the table here since we're
past the point at which we usually stop trying to support pre-production
hardware. An appropriate check is added to
intel_detect_preproduction_hw() to print an error and taint the kernel
just in case someone still tries to load the driver on old
pre-production hardware.
v2:
- Drop pre-production steppings and add error/taint at startup when
loading on pre-production hardware.
Bspec: 21141 # pre-Nov 2019 snapshot
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-8-matthew.d.roper@intel.com
Switch SKL to use a revid->stepping table as we're trying to do on all
platforms going forward. Also drop the preproduction revisions and add
the newer steppings we hadn't already handled.
Note that SKL has a case where a newer revision ID corresponds to an
older GT/disp stepping (0x9 -> STEP_J0, 0xA -> STEP_I1). Also, the lack
of a revision ID 0x8 in the table is intentional and not an oversight.
We'll re-write the KBL-specific comment to make it clear that these kind
of quirks are expected.
v2:
- Since GT and display steppings are always identical on SKL use a
macro to set both values at once in a more readable manner. (Anusha)
- Drop preproduction steppings.
Bspec: 13626
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-4-matthew.d.roper@intel.com
Same bit was required for Wa_14012131227 in DG1 now it is also
required as Wa_1508744258 to TGL, RKL, DG1, ADL-S and ADL-P.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-3-jose.souza@intel.com
Most of the places are using this format so lets consolidate it.
v2:
- split patch in two: display and non-display because of conflicts
between drm-intel-gt-next x drm-intel-next
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-2-jose.souza@intel.com
Because Render Power Gating restricts us to just a single subslice as a
valid steering target for reads of multicast registers in a SUBSLICE
range, the default steering we setup at init may not lead to a suitable
target for L3BANK multicast register. In cases where it does not, use
explicit runtime steering whenever an L3BANK multicast register is read.
While we're at it, let's simplify the function a little bit and drop its
support for gen10/CNL since no such platforms ever materialized for real
use. Multicast register steering is already an area that causes enough
confusion; no need to complicate it with what's effectively dead code.
v2:
- Use gt->uncore instead of gt->i915->uncore. (Tvrtko)
- Use {} as table terminator. (Rodrigo)
v3:
- L3bank fuse register is a disable mask rather than an enable mask.
We need to invert it before use. (CI)
v4:
- L3bank ID goes in the subslice field, not the slice field. (CI)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617211425.1943662-4-matthew.d.roper@intel.com
Although most of our multicast registers are replicated per-subslice, we
also have a small number of multicast registers that are replicated
per-l3 bank instead. For both types of multicast registers we need to
make sure we steer reads of these registers to a valid instance.
Ideally we'd like to find a specific instance ID that would steer reads
of either type of multicast register to a valid instance (i.e., not
fused off and not powered down), but sometimes the combination of
part-specific fusing and the additional restrictions imposed by Render
Power Gating make it impossible to find any overlap between the set of
valid subslices and valid l3 banks. This problem will become even more
noticeable on our upcoming platforms since they will be adding
additional types of multicast registers with new types of replication
and rules for finding valid instances for reads.
To handle this we'll continue to pick a suitable subslice instance at
driver startup and program this as the default (sliceid,subsliceid)
setting in the steering control register (0xFDC). In cases where we
need to read another type of multicast GT register, but the default
subslice steering would not correspond to a valid instance, we'll
explicitly re-steer the single read to a valid value, perform the read,
and then reset the steering to it's "subslice" default.
This patch adds the general functionality to prepare for this explicit
steering of other multicast register types. We'll plug L3 bank steering
into this in the next patch, and then add additional types of multicast
registers when the support for our next upcoming platform arrives.
v2:
- Use entry->end==0 as table terminator. (Rodrigo)
- Grab forcewake in wa_list_verify() now that we're using accessors
that assume forcewake is already held.
v3:
- Fix loop condition when iterating over steering range tables.
(Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617211425.1943662-3-matthew.d.roper@intel.com
Most of the context WA are already implemented.
Adding adl_p platform tag to reflect so.
v2: adjust comments for clarity (MattR)
BSpec: 54369
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608174721.17593-1-clinton.a.taylor@intel.com
This was done by the following semantic patch:
@@ expression i915; @@
- INTEL_GEN(i915)
+ GRAPHICS_VER(i915)
@@ expression i915; expression E; @@
- INTEL_GEN(i915) >= E
+ GRAPHICS_VER(i915) >= E
@@ expression dev_priv; expression E; @@
- !IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) != E
@@ expression dev_priv; expression E; @@
- IS_GEN(dev_priv, E)
+ GRAPHICS_VER(dev_priv) == E
@@
expression dev_priv;
expression from, until;
@@
- IS_GEN_RANGE(dev_priv, from, until)
+ IS_GRAPHICS_VER(dev_priv, from, until)
@def@
expression E;
identifier id =~ "^gen$";
@@
- id = GRAPHICS_VER(E)
+ ver = GRAPHICS_VER(E)
@@
identifier def.id;
@@
- id
+ ver
It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-2-lucas.demarchi@intel.com
This WA is needed in all gen12 platforms, moving it to
gen12_ctx_workarounds_init() allow us to remove the duplicated
implementation.
Also allow us to remove the tgl_ctx_workarounds_init() that after the
WA move above was empty.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-4-lucas.demarchi@intel.com
Wa_22010271021 does not apply only to EHL, but to all gen11 and other
gen12 platforms. Gen12 is already covered in another code path, but we
need to stop checking for EHL when handling gen11.
Bspec: 33450, 52887
v2: Remove "gen11" suffix as it also applies to gen12 platforms
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-3-lucas.demarchi@intel.com
Follow Bspec 31870 to set recommended tuning values for certain GT
register. These values aren't workarounds per-se, but it's best to
handle them in the same general area of the driver, especially since
there may be real workarounds that update other bits of the same
registers.
At the moment the only value we need to worry about is the
TDS_TIMER setting in FF_MODE2. This setting was previously
described as "Wa_1604555607" on some platforms, but the spec
tells us that we should continue to program this on all current
gen12 platforms, even those that do not have that WA.
Bspec: 31870
v2: Rephrase some comments to make them clearer (Matt)
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324200502.1731265-2-lucas.demarchi@intel.com
Driver Changes:
- Prepare for local/device memory support on DG1 by starting
to use it for kernel internal allocations: context, ring
and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)
- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)
- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com
Add new symbolic names for revision ids, and convert KBL revids to use
them via the new stepping check macros.
This also fixes theoretical out of bounds access to kbl_revids array.
v3: upgrade dbg to warn on unknown revid (José)
v2: Rename stepping->step
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/79b6c48211c6b214165391d350d556bad748f747.1616764798.git.jani.nikula@intel.com
Checkpatch worries that the 'return' before an else clause might be
redundant. In this case, it is avoiding hitting the MISSING_CASE()
warning. Let us appease checkpatch by falling through to the end of the
function, which typically means that we then clean up the unused
wa_list.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122192913.4518-10-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This should be done as part of the ww loop, in order to remove a
i915_vma_pin that needs ww held.
Now only i915_ggtt_pin() callers remaining.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-25-maarten.lankhorst@linux.intel.com
Enabling atomic operations in L3 leads to unrecoverable GPU hangs, as
the machine stops responding milliseconds after receipt of the reset
request [GDRT]. By disabling the cached atomics, the hang do not occur
and we presume the GPU would reset normally for similar hangs.
Sadly this is a shotgun approach, but since the impact is critical it is
better to err on the safe side and work back from there.
Reported-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110998
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Jason Ekstrand <jason@jlesktrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125220152.24070-1-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
(cherry picked from commit b267c7ae0ad5b437b068f46919b17f85000154b4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- Extend Wa_1606931601 and Wa_1409804808 to ADL-S.
- Extend Wa_14010919138 and Wa_14010229206 to ADL-S (Madhumitha)
- Extend Wa_22010271021 to ADLS (cyokoyam)
v2:
- Extend Wa_1409804808 and remove unnecessary branching/redundant
adls workaround placeholder functions.
- Split WAs properly based on previous platforms and applicable ADLS
WA.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-9-aditya.swarup@intel.com
- Add the initial platform information for Alderlake-S.
- Specify ppgtt_size value
- Add dma_mask_size
- Add ADLS REVIDs
- HW tracking(Selective Update Tracking Enable) has been
removed from ADLS. Disable PSR2 till we enable software/
manual tracking.
v2:
- Add support for different ADLS SOC steppings to select
correct GT/DISP stepping based on Bspec 53655 based on
feedback from Matt Roper.(aswarup)
v3:
- Make display/gt steppings info generic for reuse with TGL and ADLS.
- Modify the macros to reuse tgl_revids_get()
- Add HTI support to adls device info.(mdroper)
v4:
- Rebase on TGL patch for applying WAs based on stepping info from
Matt Roper's feedback.(aswarup)
v5:
- Replace macros with PCI IDs in revid to stepping table.
v6: remove stray adls_revids (Lucas)
Bspec: 53597
Bspec: 53648
Bspec: 53655
Bspec: 48028
Bspec: 53650
BSpec: 50422
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119192931.1116500-2-lucas.demarchi@intel.com
