If a HPD pulse signalling the need to retrain the link occurs between
the KMS driver releasing the output and the supervisor interrupt that
finishes the teardown, it was possible get a NULL-ptr deref.
Avoid this by marking the link as inactive earlier.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Engines are initialised on an as-needed basis, so this results in the
same behaviour, whilst allowing us to simplify things a bit.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We should be reading registers to determine which subunits are really
present on a given board, and this needs to be done after DEVINIT.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This shouldn't have been needed ever since we started executing the
DisableLT script when shutting down heads.
Testing of the board this was originally written for seems to agree.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These exist to give NVKM information on the set of display paths that
the DD needs to be active at any given time.
Previously, the supervisor attempted to determine this solely from OR
state, but there's a few configurations where this information on its
own isn't enough to determine the specific display paths in question:
- ANX9805, where the PIOR protocol for both DP and TMDS is TMDS.
- On a device using DCB Switched Outputs.
- On GM20x and newer, with a crossbar between the SOR and macro links.
After this commit, the DD tells NVKM *exactly* which display path it's
attempting a modeset on.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
All of the necessary hw-specific logic is now handled at the output
resource level, so all of this can go away.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Also removes the user-facing methods to these controls, as they're not
currently utilised by the DD anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
An upcoming commit will limit link training to only when the sink is
meant to be displaying an image.
We still need IRQs enabled even when the link isn't trained (for MST
messages), but don't want to train the link unnecessarily.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In order to properly support the SOR -> SOR + pad macro separation
that occurred with GM20x GPUs, we need to separate OR handling out
of the output path code.
This will be used as the base to support ORs (DAC, SOR, PIOR).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Primarily intended as a way to pass per-head state around during
supervisor handling, and share logic between NV50/GF119.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming changes to split OR from output path drastically change the
placement of various operations.
In order to make the real changes clearer, do the moving around part
ahead of time.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The workaround appears to cause regressions on these boards, and from
inspection of RM traces, NVIDIA don't appear to do it on them either.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Roy Spliet <nouveau@spliet.org>
There haven't been any callers from an atomic context for a while now,
so let's remove the extra complexity.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes the second DVI output on Quadro FX380.
Thanks to NVIDIA for providing the details on the full workaround.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some VBIOS have separate tables for each link of a given output path,
which means we have to specify the specific link we're using instead
of all possible links.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Without this patch a pixel clock rate above 165 MHz on a TMDS link is
assumed to be dual link. This is true for DVI, but not for HDMI. HDMI
supports no dual link, but it supports pixel clock rates above 165 MHz.
Only activate Dual Link mode when it is actually possible and requested.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[imirkin: check for hdmi monitor for computing proto, use sor ctrl to
enable extra config bit]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
