PASID is defined as a few different types in iommu including "int",
"u32", and "unsigned int". To be consistent and to match with uapi
definitions, define PASID and its variations (e.g. max PASID) as "u32".
"u32" is also shorter and a little more explicit than "unsigned int".
No PASID type change in uapi although it defines PASID as __u64 in
some places.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/1600187413-163670-2-git-send-email-fenghua.yu@intel.com
The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious. Try
to improve the situation by renaming __phys_to_dma to
phys_to_dma_unencryped, and not forcing architectures that want to
override phys_to_dma to actually provide __phys_to_dma.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Beware that the address size for x86-32 may exceed unsigned long.
[ 0.368971] UBSAN: shift-out-of-bounds in drivers/iommu/intel/iommu.c:128:14
[ 0.369055] shift exponent 36 is too large for 32-bit type 'long unsigned int'
If we don't handle the wide addresses, the pages are mismapped and the
device read/writes go astray, detected as DMAR faults and leading to
device failure. The behaviour changed (from working to broken) in commit
fa954e6831 ("iommu/vt-d: Delegate the dma domain to upper layer"), but
the error looks older.
Fixes: fa954e6831 ("iommu/vt-d: Delegate the dma domain to upper layer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: James Sewart <jamessewart@arista.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://lore.kernel.org/r/20200822160209.28512-1-chris@chris-wilson.co.uk
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Removal of the dev->archdata.iommu (or similar) pointers from
most architectures. Only Sparc is left, but this is private to
Sparc as their drivers don't use the IOMMU-API.
- ARM-SMMU Updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell
Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d Updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel
drivers into their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test
coverage)
-----BEGIN PGP SIGNATURE-----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=3O2Z
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Remove of the dev->archdata.iommu (or similar) pointers from most
architectures. Only Sparc is left, but this is private to Sparc as
their drivers don't use the IOMMU-API.
- ARM-SMMU updates from Will Deacon:
- Support for SMMU-500 implementation in Marvell Armada-AP806 SoC
- Support for SMMU-500 implementation in NVIDIA Tegra194 SoC
- DT compatible string updates
- Remove unused IOMMU_SYS_CACHE_ONLY flag
- Move ARM-SMMU drivers into their own subdirectory
- Intel VT-d updates from Lu Baolu:
- Misc tweaks and fixes for vSVA
- Report/response page request events
- Cleanups
- Move the Kconfig and Makefile bits for the AMD and Intel drivers into
their respective subdirectory.
- MT6779 IOMMU Support
- Support for new chipsets in the Renesas IOMMU driver
- Other misc cleanups and fixes (e.g. to improve compile test coverage)
* tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits)
iommu/amd: Move Kconfig and Makefile bits down into amd directory
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory
iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu
iommu: Add gfp parameter to io_pgtable_ops->map()
iommu: Mark __iommu_map_sg() as static
iommu/vt-d: Rename intel-pasid.h to pasid.h
iommu/vt-d: Add page response ops support
iommu/vt-d: Report page request faults for guest SVA
iommu/vt-d: Add a helper to get svm and sdev for pasid
iommu/vt-d: Refactor device_to_iommu() helper
iommu/vt-d: Disable multiple GPASID-dev bind
iommu/vt-d: Warn on out-of-range invalidation address
iommu/vt-d: Fix devTLB flush for vSVA
iommu/vt-d: Handle non-page aligned address
iommu/vt-d: Fix PASID devTLB invalidation
iommu/vt-d: Remove global page support in devTLB flush
iommu/vt-d: Enforce PASID devTLB field mask
iommu: Make some functions static
iommu/amd: Remove double zero check
...
For SR-IOV, the PF PRI is shared between the PF and any associated VFs, and
the PRI Capability is allowed for PFs but not for VFs. Searching for the
PRI Capability on a VF always fails, even if its associated PF supports
PRI.
Add pci_pri_supported() to check whether device or its associated PF
supports PRI.
[bhelgaas: commit log, avoid "!!"]
Fixes: b16d0cb9e2 ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS")
Link: https://lore.kernel.org/r/1595543849-19692-1-git-send-email-ashok.raj@intel.com
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org # v4.4+
The VT-d spec requires (10.4.4 Global Command Register, TE field) that:
Hardware implementations supporting DMA draining must drain any in-flight
DMA read/write requests queued within the Root-Complex before completing
the translation enable command and reflecting the status of the command
through the TES field in the Global Status register.
Unfortunately, some integrated graphic devices fail to do so after some
kind of power state transition. As the result, the system might stuck in
iommu_disable_translation(), waiting for the completion of TE transition.
This provides a quirk list for those devices and skips TE disabling if
the qurik hits.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208363
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206571
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Koba Ko <koba.ko@canonical.com>
Tested-by: Jun Miao <jun.miao@windriver.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200723013437.2268-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After page requests are handled, software must respond to the device
which raised the page request with the result. This is done through
the iommu ops.page_response if the request was reported to outside of
vendor iommu driver through iommu_report_device_fault(). This adds the
VT-d implementation of page_response ops.
Co-developed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Co-developed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is refactored in two ways:
- Make it global so that it could be used in other files.
- Make bus/devfn optional so that callers could ignore these two returned
values when they only want to get the coresponding iommu pointer.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-9-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For guest requested IOTLB invalidation, address and mask are provided as
part of the invalidation data. VT-d HW silently ignores any address bits
below the mask. SW shall also allow such case but give warning if
address does not align with the mask. This patch relax the fault
handling from error to warning and proceed with invalidation request
with the given mask.
Fixes: 6ee1b77ba3 ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For guest SVA usage, in order to optimize for less VMEXIT, guest request
of IOTLB flush also includes device TLB.
On the host side, IOMMU driver performs IOTLB and implicit devTLB
invalidation. When PASID-selective granularity is requested by the guest
we need to derive the equivalent address range for devTLB instead of
using the address information in the UAPI data. The reason for that is,
unlike IOTLB flush, devTLB flush does not support PASID-selective
granularity. This is to say, we need to set the following in the PASID
based devTLB invalidation descriptor:
- entire 64 bit range in address ~(0x1 << 63)
- S bit = 1 (VT-d CH 6.5.2.6).
Without this fix, device TLB flush range is not set properly for PASID
selective granularity. This patch also merged devTLB flush code for both
implicit and explicit cases.
Fixes: 6ee1b77ba3 ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200625130836.1916-3-joro@8bytes.org
The iommu_domain_identity_map() helper takes start/end PFN as arguments.
Fix a misuse case where the start and end addresses are passed.
Fixes: e70b081c6f ("iommu/vt-d: Remove IOVA handling code from the non-dma_ops path")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Link: https://lore.kernel.org/r/20200622231345.29722-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Scalable-mode Page-walk Coherency (SMPWC) field in the VT-d extended
capability register indicates the hardware coherency behavior on paging
structures accessed through the pasid table entry. This is ignored in
current code and using ECAP.C instead which is only valid in legacy mode.
Fix this so that paging structure updates could be manually flushed from
the cache line if hardware page walking is not snooped.
Fixes: 765b6a98c1 ("iommu/vt-d: Enumerate the scalable mode capability")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, an external malicious PCI device can masquerade the VID:PID
of faulty gfx devices, and thus apply iommu quirks to effectively
disable the IOMMU restrictions for itself.
Thus we need to ensure that the device we are applying quirks to, is
indeed an internal trusted device.
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When using first-level translation for IOVA, currently the U/S bit in the
page table is cleared which implies DMA requests with user privilege are
blocked. As the result, following error messages might be observed when
passing through a device to user level:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000
[fault reason 129] SM: U/S set 0 for first-level translation
with user privilege
This fixes it by setting U/S bit in the first level page table and makes
IOVA over first level compatible with previous second-level translation.
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move all files related to the Intel IOMMU driver into its own
subdirectory.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200609130303.26974-3-joro@8bytes.org
