* assign name to gpio line
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <20220325100613.1494-15-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Add support for uart2 port
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <20220325100613.1494-12-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Update default brightness and dimming frequency
* Enable current sink, while initialization
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <20220325100613.1494-11-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Add port to the node lcdc
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <20220325100613.1494-10-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* update life led label and pin number
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <20220325100613.1494-7-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Disabling poweroff support form RTC will allow poweroff
to handle from other machanism
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <20220325100613.1494-5-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Update partition table to save env and splash image
* GPMC config values optimized for Bosch Guardian Board
* NAND Chip used by Bosch Guardian Board is Micron MT29F4G08ABBFA
Signed-off-by: Gireesh Hiremath <Gireesh.Hiremath@in.bosch.com>
Message-Id: <20220325100613.1494-2-Gireesh.Hiremath@in.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Clocksource to timer configured in pwm mode can be selected using the DT
property ti,clock-source. There are few pwm timers which are not
selecting the clock source and relying on default value in hardware or
selected by driver. Instead of relying on default value, always select
the clock source from DT.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The default is enabled, and there should be no need to reconfigure
the status for SoC internal devices in the board specific files.
Only the USB PHY used needs to be configured in the board specific
files.
Cc: Bin Liu <b-liu@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Bosch Guardian is a TI am335x based device.
It's hardware specifications are as follows:
* 256 MB DDR3 memory
* 512 MB NAND Flash
* USB OTG
* RS232
* MicroSD external storage
* LCD Display interface
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
[tony@atomide.com: updated to use #include]
Signed-off-by: Tony Lindgren <tony@atomide.com>
