I suspect the version bump is just to signify that the table now specifies
pad macro/links instead of SOR/sublinks.
For our usage of the table, just recognising the new version is enough.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We get a few warnings when building kernel with W=1:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c:29:1: warning: no previous prototype for 'nvbios_fan_table' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c:56:1: warning: no previous prototype for 'nvbios_fan_entry' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c:184:1: warning: no previous prototype for 'gt215_clk_info' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:99:1: warning: no previous prototype for 'gt215_link_train_calc' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:153:1: warning: no previous prototype for 'gt215_link_train' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:271:1: warning: no previous prototype for 'gt215_link_train_init' [-Wmissing-prototypes]
....
In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Depending on the value a different formular is used to calculated the
voltage for this entry.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This table contains three important clocks:
base clock: This is the non boosted max clock.
tdp clock: The clock at wich the vbios guarentees the TDP won't ever be
exceeded at max load (seems to be always the same as the base
clock, but behaves differently).
boost clock: The avg clock the gpu will stay boosted to. It doesn't seem to
affect the behaviour of the nvidia driver at all though.
v2: Make clear that base/boost/tdp fields are ids.
v5: Rename Base clock to vpstate.
Make vbios pointers 32bit.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There are at least three "max" entries, which specify the max voltage.
Because they are actually normal voltage map entries, they can also be
affected by the temperature.
Nvidia respects those entries and if they get changed, nvidia uses the
lower voltage from all three.
We shouldn't exceed those voltages at any given time.
v2: State what those entries do in the source.
v3: Add the third max entry.
v5: Better describe the entries.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There is a field in the voltage table which tells us if the VIDs are taken
from the entries or calculated through the header.
v2: Don't break older versions.
v5: Reverse flag name.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some Fermi+ GPUs specify VID information via voltage table entries, rather
than describing them as a range in the header.
The mask may be bigger than 0x1fffff, but this value is already >2V, so it
will be fine for now.
This patch fixes volting issues on those cards enabling them to switch
cstates.
v6: rework message
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Previously we parsed that table a bit wrong:
1. The entry layout depends on the sensor type used.
2. We have all resitors in one entry for the INA3221.
3. The config is already included in the vbios.
This commit addresses that issue and with that we should be able to read
out the right power consumption for every GPU with a INA209, INA219 and
INA3221.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Makes common the code that was previously used by the PMU table parsing,
as it appears other tables need this too.
Not much of an idea what this is all about...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Karol Herbst:
v4: don't kmalloc(0)
v5: stricter validation
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Upon encountering an unknown condition code, the script interpreter
is supposed to skip 'size' bytes and continue at the next devinit
token.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is an oversight that made use of the trip-point-based fan managenent on
cards that never expose those. This led the fan to stay at fan_min.
Fortunately, the emergency code would kick when the temperature would reach
90°C.
Reported-by: Tom Englund <tomenglund26@gmail.com>
Tested-by: Tom Englund <tomenglund26@gmail.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Tested-by: Daemon32 <lnf.purple@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92126
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Does not seem to be necessary for NVA0, hence untested by me.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
coverity.com reported that memset was using a buffer of size 0, on
checking the code it turned out that the function was not being used. So
remove it.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently OF bios load fails for a few reasons:
- checksum failure
- bios size too small
- no PCIR header
- bios length not a multiple of 4
In this change, we resolve all of the above by ignoring any checksum
failures (since OF VBIOS tends not to have a checksum), and faking the
PCIR data when loading from OF.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
