1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
Commit graph

32695 commits

Author SHA1 Message Date
Michel Dänzer
8b02cde994 drm/amdgpu: Also call cursor_move_locked when the cursor size changes
The cursor size also affects the register programming.

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-06 18:08:28 -05:00
Michel Dänzer
8e57ec613d drm/amdgpu: Store CRTC relative amdgpu_crtc->cursor_x/y values
We were storing viewport relative coordinates. However, crtc_cursor_set2
and cursor_reset pass amdgpu_crtc->cursor_x/y as the x/y parameters of
cursor_move_locked, which would break if the CRTC isn't located at
(0, 0).

Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-06 18:08:27 -05:00
Arindam Nath
dd31ae9ac9 drm/amd/amdgpu: enable GUI idle INT after enabling CGCG
GUI idle interrupts should be enabled only after we
have enabled coarse grain clock gating (CGCG). This
prevents GFX engine generating idle interrupt even
though CGCG is not completely enabled.

Most of the time this goes un-noticed, but on some
Stoney ASICs this results in GFX engine hang after
system resumes from suspend. The issue is not
particular to Stoney though and could have occured
on any ASIC. The patch fixes this issue.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Sunil Uttarwar <Sunil.Uttarwar1@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-12-06 18:08:26 -05:00
Maruthi Srinivas Bayyavarapu
ecc2cf7cc8 drm/amdgpu: enable VCE clockgating in Polaris-10/11
VCE clocks are set to be disabled, when not in use.

Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-06 18:08:26 -05:00
Rex Zhu
ddbc2594cc drm/amdgpu: fix CI bug uvd status not true in debugfs.
can't get uvd's state by uvd_enabled. uvd_enabled
is used for request higher mclk.
in multi-display case, mclk has been in highest clock,
no matter uvd's state changed, uvd_enabled will not
be changed.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-06 18:08:25 -05:00
Xiangliang Yu
188a301fd7 drm/amdgpu: remove error message when loading driver
Forget to check UCODE_ID_STORAGE case and will cause to print error
message when loading driver, correct it.

Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-06 18:08:24 -05:00
Xiangliang Yu
7047391fab drm/amd/powerplay: fix firmware loading failure
For virtualization, firmware loading need the firmware version info,
and will load the right firmware. So, transfer fw_version to toc.

Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-06 18:08:24 -05:00
Rex Zhu
3c3a7e616c drm/amdgpu: fix bug mclk can't change on Polaris
the root cause is we gate the clock to uvd vcpu.
mclk's change should need the response from uvd if
it is power on.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-06 18:08:23 -05:00
Rex Zhu
805b3ba87d drm/amdgpu: refine uvd 6.0 clock gate feature.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-06 18:08:22 -05:00
Alex Deucher
ad3b961423 drm/amdgpu/gfx8: move eop programming per queue
It's per queue not per pipe.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-06 18:08:22 -05:00
Alex Deucher
70b5c5aae5 Revert "drm/amdgpu: use the kernel zone memory size as the max remote memory in amdgpu"
This reverts commit a693e050ed.

This breaks on systems with huge amounts of system memory as we do not have
enough vram to store the page tables.  Additionally, this is less of an issue
with the recent gtt manager changes.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-12-06 18:08:21 -05:00
Gustavo Padovan
db444e1344 drm/atomic: doc: remove old comment about nonblocking commits
We now support nonblocking commits on drm_atomic_helper_commit()
so the comment is not valid anymore.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1480946626-30917-1-git-send-email-gustavo@padovan.org
2016-12-06 16:28:30 -02:00
Lucas Stach
8c31f6034b drm/panel: simple: Add support for AUO G185HAN01
This adds support for the AU Optronics G185HAN01 18.5" LVDS FullHD TFT
LCD panel, which can be supported by the simple panel driver.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06 17:06:32 +01:00
Lucas Stach
697035c6b8 drm/panel: simple: Add support for AUO G133HAN01
This adds support for the AU Optronics G133HAN01 13.3" LVDS FullHD TFT
LCD panel, which can be supported by the simple panel driver.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06 17:06:31 +01:00
Lucas Stach
4ae13e4868 drm/panel: simple: Add more properties to Innolux G121I1-L01
Convert from a single mode to display timings, which allow to describe
the minimum/maximium blanking and clock rates, add enable/disable delays
and provide the bus format.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06 16:55:44 +01:00
zain wang
5466a631b2 drm/panel: simple: Add bits-per-component for Sharp LQ123P1JX31
The Sharp LQ123P1JX31 panel support 8 bits per component.

Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06 16:52:32 +01:00
Chen-Yu Tsai
230c5b4423 drm/panel: simple: Check against num_timings when setting preferred for timing
In the loop on .timings, we should check .num_timings to see if it's the
only mode specified, not .num_modes, which should be used with .modes.

Fixes: cda553725c ("drm/panel: simple: Set appropriate mode type")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06 16:47:07 +01:00
Randy Li
2cb35c802a drm/panel: Add support for Chunghwa CLAA070WP03XG panel
The Chunghwa CLAA070WP03XG is a 7" 1280x800 panel, which can be
supported by the simple panel driver.

Signed-off-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06 16:43:55 +01:00
Chris Wilson
d637c17832 drm/i915: Use memcpy_from_wc for GPU error capture
On all platforms we now always read the contents of buffers via the GTT,
i.e. using WC cpu access. Reads are slow, but they can be accelerated
with an internal read buffer using sse4.1 (movntqda). This is our
i915_memcpy_from_wc() routine which also checks for sse4.1 support and
so we can fallback to using a regular slow memcpy if we need to.

When compressing the pages, the reads are currently done inside zlib's
fill_window() routine and so we must copy the page into a temporary
which is then already inside the CPU cache and fast for zlib's
compression. When not compressing the pages, we don't need a temporary
and can just use the accelerated read from WC into the destination.

v2: Use zstream locals to reduce diff and allocate the additional
temporary storage only if sse4.1 is supported.
v3: Use length=0 for the sse4.1 support check

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161206124051.17040-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-12-06 14:23:16 +00:00
Chris Wilson
1fe7841d89 drm: Don't block the kworker waiting for mode_config.mutex in output_poll()
If we cannot acquire the mode_config.mutex immediately, just back off and
queue a new attempt after the poll interval. This is mostly to stop the
hung task spam when the system is deadlocked, but it will also lessen
the load (in such extreme cases).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
[danvet:s/lock/mutex/ per Eric's comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161206113715.30382-1-chris@chris-wilson.co.uk
2016-12-06 13:41:15 +01:00
Michel Dänzer
d5264ed382 drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver
This is an attempt to make the previous fix a bit more robust going
forward.

v2:
* Only allow DRM_CAP_TIMESTAMP_MONOTONIC with UMS drivers (Daniel
  Vetter, Alex Deucher)
* Different logic to keep DRM_CAP_TIMESTAMP_MONOTONIC separate from
  the other caps (Daniel Vetter)

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201073731.5716-1-michel@daenzer.net
2016-12-06 13:27:35 +01:00
Daniel Vetter
75e75cbd55 Merge remote-tracking branch 'airlied/drm-next' into drm-misc-next
Backmerge v4.9-rc8 to get at

commit e94bd1736f
Author: Michel Dänzer <michel.daenzer@amd.com>
Date:   Wed Nov 30 17:30:01 2016 +0900

drm: Don't call drm_for_each_crtc with a non-KMS driver

so I can apply Michel's follow-up patch.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-12-06 10:26:48 +01:00
Nicolai Stange
58309befa8 drm/amdgpu: don't add files at control minor debugfs directory
Since commit 8a357d1004 ("drm: Nerf DRM_CONTROL nodes"), a
struct drm_device's ->control member is always NULL.

In the case of CONFIG_DEBUG_FS=y, amdgpu_debugfs_add_files() accesses
->control->debugfs_root though. This results in a NULL pointer
dereference.

Fix this by omitting the drm_debugfs_create_files() call for the
control minor debugfs directory which is now non-existent anyway.

Fixes: 8a357d1004 ("drm: Nerf DRM_CONTROL nodes")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98915
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205203022.11671-1-nicstange@gmail.com
2016-12-06 10:03:28 +01:00
Marta Lofstedt
8f5040e421 drm: allow changing DPMS mode
The drm_atomic_helper_connector_dpms
will set the connector back the old DPMS state
before returning. This makes it impossible to change
DPMS state of the connector.

Fixes: 0853695c3b
v2: edit of commit message
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: dri-devel@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205120408.13056-1-marta.lofstedt@intel.com
2016-12-06 10:03:28 +01:00
Marek Vasut
45d59d7040 drm: Add new driver for MXSFB controller
Add new driver for the MXSFB controller found in i.MX23/28/6SX .
The MXSFB controller is a simple framebuffer controller with one
parallel LCD output. Unlike the MXSFB fbdev driver that is used
on these systems now, this driver uses the DRM/KMS framework.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
2016-12-06 03:02:26 +01:00
Dave Airlie
197aa6ed52 Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Just refactoring HDMI driver by using infoframe helper
function, fixing GSC Kconfig dependency issue and including trivial
cleanups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: Use VIDEO_SAMSUNG_EXYNOS_GSC=n as GSC Kconfig dependency
  drm/exynos: gsc: fix spelling mistakes
  exynos-drm: Fix error messages to print flags and size
  drm/exynos/hdmi: refactor infoframe code
2016-12-06 11:09:21 +10:00
Dave Airlie
17f1dfd01c Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux into drm-next
- lots of code cleanup
- lots of bug fixes
- expose rpm based fan info via hwmon
- lots of clock and powergating fixes
- SI register header cleanup and conversion to common format used by newer asics

* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (54 commits)
  drm/amdgpu: drop is_display_hung from display funcs
  drm/amdgpu/uvd: reduce IB parsing overhead on UVD5+ (v2)
  drm/amdgpu/uvd: consolidate code for fetching addr from ctx
  drm/amdgpu: Disable DPM in virtualization
  drm/amdgpu: use AMDGPU_GEM_CREATE_VRAM_CLEARED for VM PD/PTs (v2)
  drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)
  drm/amdgpu: fix error handling in amdgpu_bo_create_restricted
  drm/amdgpu: fix amdgpu_fill_buffer (v2)
  drm/amdgpu: remove amdgpu_irq_get_delayed
  amdgpu: Wrap dev_err() calls on vm faults with printk_ratelimit()
  amdgpu: Use dev_err() over vanilla printk() in vm_decode_fault()
  drm/amd/amdgpu: port of DCE v6 to new headers (v3)
  drm/amdgpu: cleanup unused iterator members for sdma v2.4
  drm/amdgpu: cleanup unused iterator members for sdma v3
  drm/amdgpu:impl vgt_flush for VI(V5)
  drm/amdgpu: enable uvd mgcg for Fiji.
  drm/amdgpu: refine cz uvd clock gate logic.
  drm/amdgpu: change log level to KERN_INFO in ci_dpm.c
  drm/amdgpu: always un-gate UVD REGS path.
  drm/amdgpu/sdma: fix typo in packet setup
  ...
2016-12-06 11:01:33 +10:00
Dave Airlie
770ac20413 Merge branch 'drm-etnaviv-next' of git://git.pengutronix.de/lst/linux into drm-next
- fix dma-buf export path to return correct SG table
- trivially implement direct dma-buf mapping
- allow DRAW_INSTANCED commands in validator
- make the driver work on i.MX6SX, yielding a working 2D/3D stack
together with Mareks MXS DRM driver

* 'drm-etnaviv-next' of git://git.pengutronix.de/lst/linux:
  MAINTAINERS: add etnaviv mailinglist
  drm/etnaviv: move linear window on MC1.0 parts if necessary
  drm/etnaviv: don't invoke OOM killer from dump code
  drm/etnaviv: fix gem_prime_get_sg_table to return new SG table
  drm/etnaviv: Allow DRAW_INSTANCED commands
  drm/etnaviv: implement dma-buf mmap
2016-12-06 11:00:16 +10:00
Dave Airlie
9ac63d9973 Merge branch 'linux-4.10' of git://github.com/skeggsb/linux into drm-next
- BIT_PERF_PTRS uses 32-bit pointers to its subtables, we were parsing
them as 16-bit, causing various issues on newer boards.
- Support for MXM on GM20x and up.
- More display-related fixes.

* 'linux-4.10' of git://github.com/skeggsb/linux:
  drm/nouveau/mxm: warn more loudly on unsupported DCB version
  drm/nouveau/mxm: handle DCB 4.1 modification
  drm/nouveau/bios/mxm: handle digital connector table 1.1
  drm/nouveau: Queue hpd_work on (runtime) resume
  drm/nouveau: Rename acpi_work to hpd_work
  drm/nouveau/kms/nv50: Fix atomic pageflip events.
  drm/nouveau/fb/ram/gp100-: fix memory detection where FBP_NUM != FBPA_NUM
  drm/nouveau/bios/volt: pointers are 32-bit
  drm/nouveau/bios/vmap: pointers are 32-bit
  drm/nouveau/bios/timing: pointers are 32-bit
  drm/nouveau/bios/therm: pointers are 32-bit
  drm/nouveau/bios/perf: pointers are 32-bit
  drm/nouveau/bios/iccsense: pointers are 32-bit
  drm/nouveau/bios/fan: pointers are 32-bit
  drm/nouveau/bios/cstep: pointers are 32-bit
  drm/nouveau/bios/boost: pointers are 32-bit
2016-12-06 09:34:43 +10:00
Ben Skeggs
a8f6cb7bb3 drm/nouveau/mxm: warn more loudly on unsupported DCB version
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-12-06 09:08:23 +10:00
Ben Skeggs
f6bf17391f drm/nouveau/mxm: handle DCB 4.1 modification
Allows MXM DCB modification to be handled on GM20x and newer boards.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-12-06 09:08:23 +10:00
Ben Skeggs
8ca99316fd drm/nouveau/bios/mxm: handle digital connector table 1.1
I suspect the version bump is just to signify that the table now specifies
pad macro/links instead of SOR/sublinks.

For our usage of the table, just recognising the new version is enough.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-12-06 09:08:23 +10:00
Matthew Auld
4cfa20c834 drm/i915: allow GEM_BUG_ON expr checking with !DEBUG_GEM
Use BUILD_BUG_ON_INVALID(expr) in GEM_BUG_ON when building without
DEBUG_GEM. This means the compiler can now check the validity of expr
without generating any code, in turn preventing us from inadvertently
breaking the build when DEBUG_GEM is not enabled.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202184750.3843-1-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-12-05 20:49:17 +00:00
Chris Wilson
0798cff46b drm/i915/execlists: Use list_safe_reset_next() instead of opencoding
list.h provides a macro for updating the next element in a safe
list-iter, so let's use it so that it is hopefully clearer to the reader
about the unusual behaviour, and also easier to grep.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-6-chris@chris-wilson.co.uk
2016-12-05 20:49:17 +00:00
Chris Wilson
bdb821ca44 drm/i915: Enable swfence debugobject support for i915.ko
Only once the debugobject symbols are exported can we enable support for
debugging swfences when i915 is built as a module. Requires commit
2617fdca3f68 ("lib/debugobjects: export for use in modules")

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-5-chris@chris-wilson.co.uk
2016-12-05 20:49:17 +00:00
Chris Wilson
778e23a9e0 drm/i915: Implement local atomic_state_free callback
As we use debugobjects to track the lifetime of fences within our atomic
state, we ideally want to mark those objects as freed along with their
containers. This merits us hookin into config->funcs->atomic_state_free
for this purpose.

This allows us to enable debugobjects for sw-fences without triggering
known issues.

Fixes: fc1584059d ("drm/i915: Integrate i915_sw_fence with debugobjects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-4-chris@chris-wilson.co.uk
2016-12-05 20:49:17 +00:00
Chris Wilson
7d1d9aea3e drm/i915: Tidy i915_gem_valid_gtt_space()
We can replace a couple of tests with an assertion that the passed in
node is already allocated (as matches the existing call convention) and
by a small bit of refactoring we can bring the line lengths to under
80cols.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-3-chris@chris-wilson.co.uk
2016-12-05 20:49:17 +00:00
Chris Wilson
172ae5b4c8 drm/i915: Fix i915_gem_evict_for_vma (soft-pinning)
Soft-pinning depends upon being able to check for availabilty of an
interval and evict overlapping object from a drm_mm range manager very
quickly. Currently it uses a linear list, and so performance is dire and
not suitable as a general replacement. Worse, the current code will oops
if it tries to evict an active buffer.

It also helps if the routine reports the correct error codes as expected
by its callers and emits a tracepoint upon use.

For posterity since the wrong patch was pushed (i.e. that missed these
key points and had known bugs), this is the changelog that should have
been on commit 506a8e87d8 ("drm/i915: Add soft-pinning API for
execbuffer"):

Userspace can pass in an offset that it presumes the object is located
at. The kernel will then do its utmost to fit the object into that
location. The assumption is that userspace is handling its own object
locations (for example along with full-ppgtt) and that the kernel will
rarely have to make space for the user's requests.

This extends the DRM_IOCTL_I915_GEM_EXECBUFFER2 to do the following:
* if the user supplies a virtual address via the execobject->offset
  *and* sets the EXEC_OBJECT_PINNED flag in execobject->flags, then
  that object is placed at that offset in the address space selected
  by the context specifier in execbuffer.
* the location must be aligned to the GTT page size, 4096 bytes
* as the object is placed exactly as specified, it may be used by this
  execbuffer call without relocations pointing to it

It may fail to do so if:
* EINVAL is returned if the object does not have a 4096 byte aligned
  address
* the object conflicts with another pinned object (either pinned by
  hardware in that address space, e.g. scanouts in the aliasing ppgtt)
  or within the same batch.
  EBUSY is returned if the location is pinned by hardware
  EINVAL is returned if the location is already in use by the batch
* EINVAL is returned if the object conflicts with its own alignment (as meets
  the hardware requirements) or if the placement of the object does not fit
  within the address space

All other execbuffer errors apply.

Presence of this execbuf extension may be queried by passing
I915_PARAM_HAS_EXEC_SOFTPIN to DRM_IOCTL_I915_GETPARAM and checking for
a reported value of 1 (or greater).

v2: Combine the hole/adjusted-hole ENOSPC checks
v3: More color, more splitting, more blurb.

Fixes: 506a8e87d8 ("drm/i915: Add soft-pinning API for execbuffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-2-chris@chris-wilson.co.uk
2016-12-05 20:49:17 +00:00
Chris Wilson
85fd4f58d7 drm/i915: Mark all non-vma being inserted into the address spaces
We need to distinguish between full i915_vma structs and simple
drm_mm_nodes when considering eviction (i.e. we must be careful not to
treat a mere drm_mm_node as a much larger i915_vma causing memory
corruption, if we are lucky). To do this, color these not-a-vma with -1
(I915_COLOR_UNEVICTABLE).

v2...v200: New name for -1.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-1-chris@chris-wilson.co.uk
2016-12-05 20:49:17 +00:00
Hans de Goede
721d484563 drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating
On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading
i915 at boot 1 out of every 3 boots, resulting in a non functional LCD.
Once the i915 driver has successfully loaded, the panel can be disabled /
enabled without hitting this issue.

The getting stuck is caused by vlv_init_display_clock_gating() clearing
the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from
chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled
driving the DSI LCD by the BIOS.

Clearing this bit while DSI is in use is a known issue and
intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it
as appropriate.

This commit modifies vlv_init_display_clock_gating() to leave the
DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck.

Changes in v2:
-Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and
comment

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-12-05 20:45:58 +02:00
Pan Bian
16571a8a43 drm/qxl: fix use of uninitialized variable
In function qxl_release_alloc(), when kmalloc() returns a NULL pointer,
it returns value 0 and parameter *ret is uninitialized. 0 means no error
to the callers of qxl_release_alloc(). The callers keep going and will
try to reference the uninitialized variable. This patch fixes the bug,
returning "-ENOMEM" when kmalloc() fails.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188911

Signed-off-by: Pan Bian <bianpan2016@163.com>
[seanpaul fixed up subject prefix]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1480777902-7648-1-git-send-email-bianpan2016@163.com
2016-12-05 13:14:13 -05:00
Ville Syrjälä
e339d67eeb drm/i915: Pass crtc state to vlv_compute_wm_level()
Rather than accessing crtc->config in vlv_compute_wm_level() let's
pass in the crtc state explicitly. One step closer to atomic.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-16-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-12-05 16:23:28 +02:00
Ville Syrjälä
fa292a4be9 drm/i915: Clean up vlv_program_watermarks()
Add small helpers to make the intent of the staggered enable/disable
sequence in vlv_program_watermarks() easier on the eyes.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-15-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-12-05 16:23:28 +02:00
Ville Syrjälä
50f4caef86 drm/i915: Write all DDL registers in one go
We'll want to decouple the vlv/chv wm register reprogramming from any
single pipe. So let's just write all the DDL registers in one go. We
already write all the wm registers anyway since the bits are sprinkled
all over the place and so writing them for just a single pipe would have
been too messy anyway.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-14-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-12-05 16:23:28 +02:00
Ville Syrjälä
6fe6a7ffd3 drm/i915: Zero out HOWM registers before writing new WM/HOWM register values
On VLV/CHV some of the watermark values are split across two registers:
low order bits in one, and high order bits in another. So we may not be
able to update a single watermark value atomically, and thus we must be
careful that we don't temporarily introduce out of bounds values during
the reprogramming. To prevent this we can simply zero out all the high
order bits initially, then we update the low order bits, and finally
we update the high order bits with the final value.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-13-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-12-05 16:23:27 +02:00
Ville Syrjälä
11a85d6ab1 drm/i915: Skip vblank wait if cxsr was already off
Before we attempt to turn any planes on or off we must first exit
csxr. That's due to cxsr effectively making the plane enable bits
read-only. Currently we achieve that with a vblank wait right after
toggling the cxsr enable bit. We do the vblank wait even if cxsr was
already off, which seems wasteful, so let's try to only do it when
absolutely necessary.

We could start tracking the cxsr state fully somewhere, but for now
it seems easiest to just have intel_set_memory_cxsr() return the
previous cxsr state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-11-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-12-05 16:23:27 +02:00
Ville Syrjälä
3d90e649fa drm/i915: Protect cxsr state with wm_mutex
Let's protect the cxsr state with the wm_mutex, since it might
get poked from multiple places if there's a parallel plane update
happening with a pipe getting enable/disabled.

It's still pretty racy for the old platforms, but for vlv/chv it
should work, I think. If not, we'll improve it later anyway.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-10-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-12-05 16:23:27 +02:00
Ville Syrjälä
7c951c0025 drm/i915: Pass around dev_priv in vlv wm functions
Passing dev_priv instead of dev is the future. Let's make the vlv/chv wm
functions respect that idea.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-9-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-12-05 16:23:26 +02:00
Ville Syrjälä
26cca0e5f3 drm/i915: Introduce vlv_invert_wm_value()
Add a small helper to do invert the vlv/chv values. Less fragile
perhaps, and let's us clearly mark all overlarge wateramarks as
disabled (by just making them all USHRT_MAX).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-8-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-12-05 16:23:26 +02:00
Ville Syrjälä
1b31389cd0 drm/i915: Organize vlv/chv watermarks by plane_id
Store the vlv/chv watermark values in straight up arrays indexed by
enum plane_id. Avoids a lot of useless checks for the plane type when
we don't have to think which structure member we need to access.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-7-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-12-05 16:23:26 +02:00