mbcache can be a module that is loaded long after startup, when someone
asks to mount an ext2 or ext4 filesystem. Therefore it should not BUG()
if kmem_cache_create() fails, but rather just fail the module load.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
mbcache entries have an 'e_referenced' bit which users can set with
mb_cache_entry_touch() to indicate that an entry should be given another
pass through the LRU list before the shrinker can delete it. However,
mb_cache_shrink() actually would, when seeing an e_referenced entry at
the front of the list (the least-recently used end), place it right at
the front of the list again. The next iteration would then remove the
entry from the list and delete it. Consequently, e_referenced had
essentially no effect, so ext2/ext4 xattr blocks would sometimes not be
reused as often as expected.
Fix this by making the shrinker move e_referenced entries to the back of
the list rather than the front.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Add a callback to allow the flexfiles layout driver to initialise the
layout private payload.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Couple conflicts resolved here:
1) In the MACB driver, a bug fix to properly initialize the
RX tail pointer properly overlapped with some changes
to support variable sized rings.
2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix
overlapping with a reorganization of the driver to support
ACPI, OF, as well as PCI variants of the chip.
3) In 'net' we had several probe error path bug fixes to the
stmmac driver, meanwhile a lot of this code was cleaned up
and reorganized in 'net-next'.
4) The cls_flower classifier obtained a helper function in
'net-next' called __fl_delete() and this overlapped with
Daniel Borkamann's bug fix to use RCU for object destruction
in 'net'. It also overlapped with Jiri's change to guard
the rhashtable_remove_fast() call with a check against
tc_skip_sw().
5) In mlx4, a revert bug fix in 'net' overlapped with some
unrelated changes in 'net-next'.
6) In geneve, a stale header pointer after pskb_expand_head()
bug fix in 'net' overlapped with a large reorganization of
the same code in 'net-next'. Since the 'net-next' code no
longer had the bug in question, there was nothing to do
other than to simply take the 'net-next' hunks.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cleanup to allow layout drivers to attach private data to layoutreturn,
and manage the data.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For the autofs module to be able to reliably check if a dentry is a
mountpoint in a multiple namespace environment the ->d_manage() dentry
operation will need to take a path argument instead of a dentry.
Link: http://lkml.kernel.org/r/20161011053352.27645.83962.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
On a filesystem with no journal, a symlink longer than about 32
characters (exact length depending on padding for encryption) could not
be followed or read immediately after being created in an encrypted
directory. This happened because when the symlink data went through the
delayed allocation path instead of the journaling path, the symlink was
incorrectly detected as a "fast" symlink rather than a "slow" symlink
until its data was written out.
To fix this, disable delayed allocation for symlinks, since there is
no benefit for delayed allocation anyway.
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If there have been no reads or writes to a given mirror since the last
layoutstats update, then don't resend the same data.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the use called stat() on an 'ls -l' workload, and the attribute
cache was successfully revalidate by READDIRPLUS, then we want to
report that back so that the readdir code continues to use
readdirplus.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
There is little point in setting NFS_INO_ADVISE_RDPLUS in nfs_lookup and
nfs_lookup_revalidate() unless a process is actually doing readdir on the
parent directory.
Furthermore, there is little point in using readdirplus if we're trying
to revalidate a negative dentry.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ben Coddington reports that commit 311324ad17, by adding the function
nfs_dir_mapping_need_revalidate() that checks page cache validity on
each call to nfs_readdir() causes a performance regression when
the directory is being modified.
If the directory is changing while we're iterating through the directory,
POSIX does not require us to invalidate the page cache unless the user
calls rewinddir(). However, we still do want to ensure that we use
readdirplus in order to avoid a load of stat() calls when the user
is doing an 'ls -l' workload.
The fix should be to invalidate the page cache immediately when we're
setting the NFS_INO_ADVISE_RDPLUS bit.
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 311324ad17 ("NFS: Be more aggressive in using readdirplus...")
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It now has only one field and is only used in one structure.
So replaced it in that structure by the field it contains.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A process can have two possible lock owner for a given open file:
a per-process Posix lock owner and a per-open-file flock owner
Use both of these when searching for a suitable stateid to use.
With this patch, READ/WRITE requests will use the correct stateid
if a flock lock is active.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The only time that a lock_context is not immediately available is in
setattr, and now that it has an open_context, it can easily find one
with nfs_get_lock_context.
This removes the need for the on-stack nfs_lockowner.
This change is preparation for correctly support flock stateids.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The open_context can always lead directly to the state, and is always easily
available, so this is a straightforward change.
Doing this makes more information available to _nfs4_do_setattr() for use
in the next patch.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
An open file description (struct file) in a given process can be
associated with two different lock owners.
It can have a Posix lock owner which will be different in each process
that has a fd on the file.
It can have a Flock owner which will be the same in all processes.
When searching for a lock stateid to use, we need to consider both of these
owners
So add a new "flock_owner" to the "nfs_open_context" (of which there
is one for each open file description).
This flock_owner does not need to be reference-counted as there is a
1-1 relation between 'struct file' and nfs open contexts,
and it will never be part of a list of contexts. So there is no need
for a 'flock_context' - just the owner is enough.
The io_count included in the (Posix) lock_context provides no
guarantee that all read-aheads that could use the state have
completed, so not supporting it for flock locks in not a serious
problem. Synchronization between flock and read-ahead can be added
later if needed.
When creating an open_context for a non-openning create call, we don't have
a 'struct file' to pass in, so the lock context gets initialized with
a NULL owner, but this will never be used.
The flock_owner is not used at all in this patch, that will come later.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
this field is not used in any important way and probably should
have been removed by
Commit: 8003d3c4aa ("nfs4: treat lock owners as opaque values")
which removed the pid argument from nfs4_get_lock_state.
Except in unusual and uninteresting cases, two threads with the same
->tgid will have the same ->files pointer, so keeping them both
for comparison brings no benefit.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This parameter hasn't been used since 2a009ec9 (Linux 3.13-rc3), so
let's remove it from this function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This parameter hasn't been used since f8407299 (Linux 3.11-rc2), so
let's remove it from this function and callers.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It's possible that two different servers can return the same (clientid,
verifier) pair purely by coincidence. Both are 64-bit values, but
depending on the server implementation, they can be highly predictable
and collisions may be quite likely, especially when there are lots of
servers.
So, check for this case. If the clientid and verifier both match, then
we actually know they *can't* be the same server, since a new
SETCLIENTID to an already-known server should have changed the verifier.
This helps fix a bug that could cause the client to mount a filesystem
from the wrong server.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Yongcheng Yang <yoyang@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that the layout state bits are synced when we cache a layout
segment for layoutreturn using an appropriate call to
pnfs_set_plh_return_info.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We need to honour the NFS_LAYOUT_RETURN_REQUESTED bit regardless of
whether or not there are layout segments pending.
Furthermore, we should ensure that we leave the plh_return_segs list
empty.
This patch fixes a memory leak of the layout segments on plh_return_segs.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When the layout state is invalidated, then so is the layout segment
state, and hence we do need to clean up the state bits.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we cannot grab the inode or superblock, then we cannot pin the
layout header, and so we cannot send a layoutreturn as part of an
async delegreturn call. In this case, we currently end up sending
an extra layoutreturn after the delegreturn. Since the layout was
implicitly returned by the delegreturn, that just gets a BAD_STATEID.
The fix is to simply complete the return-on-close immediately.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Amend the pnfs return on close helper functions to enable sending the
layoutreturn op in CLOSE/DELEGRETURN. This closes a potential race between
CLOSE/DELEGRETURN and parallel OPEN calls to the same file, and allows the
client and the server to agree on whether or not there is an outstanding
layout.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Add XDR encoding for the layoutreturn op, and storage for the layoutreturn
arguments to the DELEGRETURN compound.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Add XDR encoding for the layoutreturn op, and storage for the layoutreturn
arguments to the CLOSE compound.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The layoutreturn call will take care of invalidating the layout segments
once the call is successful.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
There is no change to the value of NFS_LAYOUT_RETURN, so we should
not be waking up the RPC call.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fix a potential race with CB_LAYOUTRECALL in which the server recalls the
remaining layout segments while our LAYOUTRETURN is still in transit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We may want to process and transmit layout stat information for the
layout segments that are being returned, so we should defer freeing
them until after the layoutreturn has completed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Instead of grabbing the layout, we want to get the inode so that we
can reduce races between layoutget and layoutrecall when the server
does not support call referring.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Both pnfs.c and the flexfiles code have their own versions of the
range intersection testing, and the "end_offset" helper.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We must put the task to sleep while holding the inode->i_lock in order
to ensure atomicity with the test for NFS_LAYOUT_RETURN.
Fixes: 500d701f33 ("NFS41: make close wait for layoutreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If there is an I/O error, we should not call LAYOUTGET until the
LAYOUTRETURN that reports the error is complete.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.8+
If the server sends us a completely new stateid, and the client thinks
it already holds a layout, then force a retry of the LAYOUTGET after
invalidating the existing layout in order to avoid corruption due to
races.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We must ensure that we don't schedule a layoutreturn if the layout stateid
has been marked as invalid.
Fixes: 2a59a04116 ("pNFS: Fix pnfs_set_layout_stateid() to clear...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.8+
If we no longer hold any layout segments, we're normally expected to
consider the layout stateid to be invalid. However we cannot assume this
if we're about to, or in the process of sending a layoutreturn.
Fixes: 334a8f3711 ("pNFS: Don't forget the layout stateid if...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.8+
We must not call nfs_pageio_init_read() on a new nfs_pageio_descriptor
while holding a reference to a layout segment, as that can deadlock
pnfs_update_layout().
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.0+
When initializing a freshly created slot for the calllback channel,
the seq_nr needs to be 0, not 1. Otherwise validate_seqid
and nfs4_slot_wait_on_seqid get confused and believe that the
mpty slot corresponds to a previously sent reply.
Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
