In CONFIG_SMP=y kernels, smp_call_function_single() returns -ENXIO when
invoked for a non-existent CPU. In contrast, in CONFIG_SMP=n kernels,
a splat is emitted and smp_call_function_single() otherwise silently
ignores its "cpu" argument, instead pretending that the caller intended
to have something happen on CPU 0. Given that there is now code that
expects smp_call_function_single() to return an error if a bad CPU was
specified, this difference in semantics needs to be addressed.
Bring the semantics of the CONFIG_SMP=n version of
smp_call_function_single() into alignment with its CONFIG_SMP=y
counterpart.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200205143409.GA7021@paulmck-ThinkPad-P72
One of the simplifications added for 5.6-rc1 has caused build
regressions on some platforms (it was reported for sparc64).
This pull request fixes it with a direct revert.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Pb+W
-----END PGP SIGNATURE-----
Merge tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb fix from Daniel Thompson:
"One of the simplifications added for 5.6-rc1 has caused build
regressions on some platforms (it was reported for sparc64).
This fixes it with a revert"
* tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs"
This reverts commit bbfceba15f.
When DBG_MAX_REG_NUM is zero then a number of symbols are conditionally
defined. It is therefore not possible to check it using C expressions.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
- Added new "bootconfig".
Looks for a file appended to initrd to add boot config options.
This has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and
kprobe events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXjtAURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qshOAQDzopQmvAVrrI6oogghr8JQA30Z2yqT
i+Ld7vPWL2MV9wEA1S+zLGDSYrj8f/vsCq6BxRYT1ApO+YtmY6LTXiUejwg=
=WNds
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.
Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72
Cc: stable@vger.kernel.org
Fixes: b9b0c831be ("ftrace: Convert graph filter to use hash tables")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Because the function graph tracer can execute in sections where RCU is not
"watching", the rcu_dereference_sched() for the has needs to be open coded.
This is fine because the RCU "flavor" of the ftrace hash is protected by
its own RCU handling (it does its own little synchronization on every CPU
and does not rely on RCU sched).
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix following instances of sparse error
kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison
Use rcu_dereference_protected to dereference the newly annotated pointer.
Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.com
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix following instances of sparse error
kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison
Use rcu_dereference_protected to access the __rcu annotated pointer.
Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.com
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Remove the unset dma_mask case as that won't get into mapping calls
anymore, and also report the other errors unconditonally and with a
slightly improved message. Remove the now pointless report_addr helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad@darnok.org>
Untangle the way how dma_direct_map_page calls into swiotlb to be able
to properly report errors where the swiotlb DMA address overflows the
mask separately from overflows in the !swiotlb case. This means that
siotlb_map now has to do a little more work that duplicates
dma_direct_map_page, but doing so greatly simplifies the calling
convention.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
dma_direct_supported tries to find the minimum addressable bitmask
based on the end pfn and optional magic that architectures can use
to communicate the size of the magic ZONE_DMA that can be used
for bounce buffering. But between the DMA offsets that can change
per device (or sometimes even region), the fact the ZONE_DMA isn't
even guaranteed to be the lowest addresses and failure of having
proper interfaces to the MM code this fails at least for one
arm subarchitecture.
As all the legacy DMA implementations have supported 32-bit DMA
masks, and 32-bit masks are guranteed to always work by the API
contract (using bounce buffers if needed), we can short cut the
complicated check and always return true without breaking existing
assumptions. Hopefully we can properly clean up the interaction
with the arch defined zones and the bootmem allocator eventually.
Fixes: ad3c7b18c5 ("arm: use swiotlb for bounce buffering on LPAE configs")
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Pull vfs recursive removal updates from Al Viro:
"We have quite a few places where synthetic filesystems do an
equivalent of 'rm -rf', with varying amounts of code duplication,
wrong locking, etc. That really ought to be a library helper.
Only debugfs (and very similar tracefs) are converted here - I have
more conversions, but they'd never been in -next, so they'll have to
wait"
* 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
simple_recursive_removal(): kernel-side rm -rf for ramfs-style filesystems
kallsyms_token_table[] only contains ASCII characters. It should be
char instead of u8.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Fix the way modifiers are skipped while walking pointers. Otherwise second
level dereferences of 'const struct foo *' will be rejected by the verifier.
Fixes: 9e15db6613 ("bpf: Implement accurate raw_tp context access via BTF")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200201000314.261392-1-ast@kernel.org
Everything for kgdb this time around is either simplifications or clean
ups.
In particular Douglas Anderson's modifications to the backtrace machine
in the *last* dev cycle have enabled Doug to tidy up some MIPS specific
backtrace code and stop sharing certain data structures across the
kernel. Note that The MIPS folks were on Cc: for the MIPS patch and
reacted positively (but without an explicit Acked-by).
Doug also got rid of the implicit switching between tasks and register
sets during some but not of kdb's backtrace actions (because the
implicit switching was either confusing for users, pointless or both).
Finally there is a coverity fix and patch to replace open coded console
traversal with the proper helper function.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=igIA
-----END PGP SIGNATURE-----
Merge tag 'kgdb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Everything for kgdb this time around is either simplifications or
clean ups.
In particular Douglas Anderson's modifications to the backtrace
machine in the *last* dev cycle have enabled Doug to tidy up some MIPS
specific backtrace code and stop sharing certain data structures
across the kernel. Note that The MIPS folks were on Cc: for the MIPS
patch and reacted positively (but without an explicit Acked-by).
Doug also got rid of the implicit switching between tasks and register
sets during some but not of kdb's backtrace actions (because the
implicit switching was either confusing for users, pointless or both).
Finally there is a coverity fix and patch to replace open coded
console traversal with the proper helper function"
* tag 'kgdb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Use for_each_console() helper
kdb: remove redundant assignment to pointer bp
kdb: Get rid of confusing diag msg from "rd" if current task has no regs
kdb: Gid rid of implicit setting of the current task / regs
kdb: kdb_current_task shouldn't be exported
kdb: kdb_current_regs should be private
MIPS: kdb: Remove old workaround for backtracing on other CPUs
The dynevent_cmd commands that build up the command string don't need
to do that themselves - there's a seq_buf facility that does pretty
much the same thing those command are doing manually, so use it
instead.
Link: http://lkml.kernel.org/r/eb8a6e835c964d0ab8a38cbf5ffa60746b54a465.1580506712.git.zanussi@kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It's kind of strange to have check_arg() callbacks as part of the arg
objects themselves; it makes more sense to just pass these in when the
args are added instead.
Remove the check_arg() callbacks from those objects which also means
removing the check_arg() args from the init functions, adding them to
the add functions and fixing up existing callers.
Link: http://lkml.kernel.org/r/c7708d6f177fcbe1a36b6e4e8e150907df0fa5d2.1580506712.git.zanussi@kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Kernel crashes inside QEMU/KVM are observed:
kernel BUG at kernel/time/timer.c:1154!
BUG_ON(timer_pending(timer) || !timer->function) in add_timer_on().
At the same time another cpu got:
general protection fault: 0000 [#1] SMP PTI of poinson pointer 0xdead000000000200 in:
__hlist_del at include/linux/list.h:681
(inlined by) detach_timer at kernel/time/timer.c:818
(inlined by) expire_timers at kernel/time/timer.c:1355
(inlined by) __run_timers at kernel/time/timer.c:1686
(inlined by) run_timer_softirq at kernel/time/timer.c:1699
Unfortunately kernel logs are badly scrambled, stacktraces are lost.
Printing the timer->function before the BUG_ON() pointed to
clocksource_watchdog().
The execution of clocksource_watchdog() can race with a sequence of
clocksource_stop_watchdog() .. clocksource_start_watchdog():
expire_timers()
detach_timer(timer, true);
timer->entry.pprev = NULL;
raw_spin_unlock_irq(&base->lock);
call_timer_fn
clocksource_watchdog()
clocksource_watchdog_kthread() or
clocksource_unbind()
spin_lock_irqsave(&watchdog_lock, flags);
clocksource_stop_watchdog();
del_timer(&watchdog_timer);
watchdog_running = 0;
spin_unlock_irqrestore(&watchdog_lock, flags);
spin_lock_irqsave(&watchdog_lock, flags);
clocksource_start_watchdog();
add_timer_on(&watchdog_timer, ...);
watchdog_running = 1;
spin_unlock_irqrestore(&watchdog_lock, flags);
spin_lock(&watchdog_lock);
add_timer_on(&watchdog_timer, ...);
BUG_ON(timer_pending(timer) || !timer->function);
timer_pending() -> true
BUG()
I.e. inside clocksource_watchdog() watchdog_timer could be already armed.
Check timer_pending() before calling add_timer_on(). This is sufficient as
all operations are synchronized by watchdog_lock.
Fixes: 75c5158f70 ("timekeeping: Update clocksource with stop_machine")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/158048693917.4378.13823603769948933793.stgit@buzz
Evan tracked down a subtle race between the update of the MSI message and
the device raising an interrupt internally on PCI devices which do not
support MSI masking. The update of the MSI message is non-atomic and
consists of either 2 or 3 sequential 32bit wide writes to the PCI config
space.
- Write address low 32bits
- Write address high 32bits (If supported by device)
- Write data
When an interrupt is migrated then both address and data might change, so
the kernel attempts to mask the MSI interrupt first. But for MSI masking is
optional, so there exist devices which do not provide it. That means that
if the device raises an interrupt internally between the writes then a MSI
message is sent built from half updated state.
On x86 this can lead to spurious interrupts on the wrong interrupt
vector when the affinity setting changes both address and data. As a
consequence the device interrupt can be lost causing the device to
become stuck or malfunctioning.
Evan tried to handle that by disabling MSI accross an MSI message
update. That's not feasible because disabling MSI has issues on its own:
If MSI is disabled the PCI device is routing an interrupt to the legacy
INTx mechanism. The INTx delivery can be disabled, but the disablement is
not working on all devices.
Some devices lose interrupts when both MSI and INTx delivery are disabled.
Another way to solve this would be to enforce the allocation of the same
vector on all CPUs in the system for this kind of screwed devices. That
could be done, but it would bring back the vector space exhaustion problems
which got solved a few years ago.
Fortunately the high address (if supported by the device) is only relevant
when X2APIC is enabled which implies interrupt remapping. In the interrupt
remapping case the affinity setting is happening at the interrupt remapping
unit and the PCI MSI message is programmed only once when the PCI device is
initialized.
That makes it possible to solve it with a two step update:
1) Target the MSI msg to the new vector on the current target CPU
2) Target the MSI msg to the new vector on the new target CPU
In both cases writing the MSI message is only changing a single 32bit word
which prevents the issue of inconsistency.
After writing the final destination it is necessary to check whether the
device issued an interrupt while the intermediate state #1 (new vector,
current CPU) was in effect.
This is possible because the affinity change is always happening on the
current target CPU. The code runs with interrupts disabled, so the
interrupt can be detected by checking the IRR of the local APIC. If the
vector is pending in the IRR then the interrupt is retriggered on the new
target CPU by sending an IPI for the associated vector on the target CPU.
This can cause spurious interrupts on both the local and the new target
CPU.
1) If the new vector is not in use on the local CPU and the device
affected by the affinity change raised an interrupt during the
transitional state (step #1 above) then interrupt entry code will
ignore that spurious interrupt. The vector is marked so that the
'No irq handler for vector' warning is supressed once.
2) If the new vector is in use already on the local CPU then the IRR check
might see an pending interrupt from the device which is using this
vector. The IPI to the new target CPU will then invoke the handler of
the device, which got the affinity change, even if that device did not
issue an interrupt
3) If the new vector is in use already on the local CPU and the device
affected by the affinity change raised an interrupt during the
transitional state (step #1 above) then the handler of the device which
uses that vector on the local CPU will be invoked.
expose issues in device driver interrupt handlers which are not prepared to
handle a spurious interrupt correctly. This not a regression, it's just
exposing something which was already broken as spurious interrupts can
happen for a lot of reasons and all driver handlers need to be able to deal
with them.
Reported-by: Evan Green <evgreen@chromium.org>
Debugged-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.de
The synth_event trace code contains some almost identical functions
and some small functions that are called only once - consolidate the
common code into single functions and fold in the small functions to
simplify the code overall.
Link: http://lkml.kernel.org/r/d1c8d8ad124a653b7543afe801d38c199ca5c20e.1580506712.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull updates from Andrew Morton:
"Most of -mm and quite a number of other subsystems: hotfixes, scripts,
ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov.
MM is fairly quiet this time. Holidays, I assume"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
kcov: ignore fault-inject and stacktrace
include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
execve: warn if process starts with executable stack
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
init/main.c: fix misleading "This architecture does not have kernel memory protection" message
init/main.c: fix quoted value handling in unknown_bootoption
init/main.c: remove unnecessary repair_env_string in do_initcall_level
init/main.c: log arguments and environment passed to init
fs/binfmt_elf.c: coredump: allow process with empty address space to coredump
fs/binfmt_elf.c: coredump: delete duplicated overflow check
fs/binfmt_elf.c: coredump: allocate core ELF header on stack
fs/binfmt_elf.c: make BAD_ADDR() unlikely
fs/binfmt_elf.c: better codegen around current->mm
fs/binfmt_elf.c: don't copy ELF header around
fs/binfmt_elf.c: fix ->start_code calculation
fs/binfmt_elf.c: smaller code generation around auxv vector fill
lib/find_bit.c: uninline helper _find_next_bit()
lib/find_bit.c: join _find_next_bit{_le}
uapi: rename ext2_swab() to swab() and share globally in swab.h
lib/scatterlist.c: adjust indentation in __sg_alloc_table
...
Summary of modules changes for the 5.6 merge window:
- Add "MS" (SHF_MERGE|SHF_STRINGS) section flags to __ksymtab_strings to
indicate to the linker that it can perform string deduplication (i.e.,
duplicate strings are reduced to a single copy in the string table).
This means any repeated namespace string would be merged to just one
entry in __ksymtab_strings.
- Various code cleanups and small fixes (fix small memleak in error path,
improve moduleparam docs, silence rcu warnings, improve error logging)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=boqg
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 5.6 merge window:
- Add "MS" (SHF_MERGE|SHF_STRINGS) section flags to __ksymtab_strings
to indicate to the linker that it can perform string deduplication
(i.e., duplicate strings are reduced to a single copy in the string
table). This means any repeated namespace string would be merged to
just one entry in __ksymtab_strings.
- Various code cleanups and small fixes (fix small memleak in error
path, improve moduleparam docs, silence rcu warnings, improve error
logging)"
* tag 'modules-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module.h: Annotate mod_kallsyms with __rcu
module: avoid setting info->name early in case we can fall back to info->mod->name
modsign: print module name along with error message
kernel/module: Fix memleak in module_add_modinfo_attrs()
export.h: reduce __ksymtab_strings string duplication by using "MS" section flags
moduleparam: fix kerneldoc
modules: lockdep: Suppress suspicious RCU usage warning
Don't instrument 3 more files that contain debugging facilities and
produce large amounts of uninteresting coverage for every syscall.
The following snippets are sprinkled all over the place in kcov traces
in a debugging kernel. We already try to disable instrumentation of
stack unwinding code and of most debug facilities. I guess we did not
use fault-inject.c at the time, and stacktrace.c was somehow missed (or
something has changed in kernel/configs). This change both speeds up
kcov (kernel doesn't need to store these PCs, user-space doesn't need to
process them) and frees trace buffer capacity for more useful coverage.
should_fail
lib/fault-inject.c:149
fail_dump
lib/fault-inject.c:45
stack_trace_save
kernel/stacktrace.c:124
stack_trace_consume_entry
kernel/stacktrace.c:86
stack_trace_consume_entry
kernel/stacktrace.c:89
... a hundred frames skipped ...
stack_trace_consume_entry
kernel/stacktrace.c:93
stack_trace_consume_entry
kernel/stacktrace.c:86
Link: http://lkml.kernel.org/r/20200116111449.217744-1-dvyukov@gmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch 'tracing: Fix histogram code when expression has same var as
value' added code to return an existing variable reference when
creating a new variable reference, which resulted in var_ref_vals
slots being reused instead of being duplicated.
The implementation of the trace action assumes that the end of the
var_ref_vals array starting at action_data.var_ref_idx corresponds to
the values that will be assigned to the trace params. The patch
mentioned above invalidates that assumption, which means that each
param needs to explicitly specify its index into var_ref_vals.
This fix changes action_data.var_ref_idx to an array of var ref
indexes to account for that.
Link: https://lore.kernel.org/r/1580335695.6220.8.camel@kernel.org
Fixes: 8bcebc77e8 ("tracing: Fix histogram code when expression has same var as value")
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have trace_boot_add_synth_event() use the synth_event interface.
Also, rename synth_event_run_cmd() to synth_event_run_command() now
that trace_boot's version is gone.
Link: http://lkml.kernel.org/r/94f1fa0e31846d0bddca916b8663404b20559e34.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Replace open coded single-linked list iteration loop with for_each_console()
helper in use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
The point bp is assigned a value that is never read, it is being
re-assigned later to bp = &kdb_breakpoints[lowbp] in a for-loop.
Remove the redundant assignment.
Addresses-Coverity ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191128130753.181246-1-colin.king@canonical.com
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
If you switch to a sleeping task with the "pid" command and then type
"rd", kdb tells you this:
No current kdb registers. You may need to select another task
diag: -17: Invalid register name
The first message makes sense, but not the second. Fix it by just
returning 0 after commands accessing the current registers finish if
we've already printed the "No current kdb registers" error.
While fixing kdb_rd(), change the function to use "if" rather than
"ifdef". It cleans the function up a bit and any modern compiler will
have no trouble handling still producing good code.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191109111624.5.I121f4c6f0c19266200bf6ef003de78841e5bfc3d@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Some (but not all?) of the kdb backtrace paths would cause the
kdb_current_task and kdb_current_regs to remain changed. As discussed
in a review of a previous patch [1], this doesn't seem intuitive, so
let's fix that.
...but, it turns out that there's actually no longer any reason to set
the current task / current regs while backtracing anymore anyway. As
of commit 2277b49258 ("kdb: Fix stack crawling on 'running' CPUs
that aren't the master") if we're backtracing on a task running on a
CPU we ask that CPU to do the backtrace itself. Linux can do that
without anything fancy. If we're doing backtrace on a sleeping task
we can also do that fine without updating globals. So this patch
mostly just turns into deleting a bunch of code.
[1] https://lore.kernel.org/r/20191010150735.dhrj3pbjgmjrdpwr@holly.lan
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191109111624.4.Ibc3d982bbeb9e46872d43973ba808cd4c79537c7@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
The kdb_current_task variable has been declared in
"kernel/debug/kdb/kdb_private.h" since 2010 when kdb was added to the
mainline kernel. This is not a public header. There should be no
reason that kdb_current_task should be exported and there are no
in-kernel users that need it. Remove the export.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191109111623.3.I14b22b5eb15ca8f3812ab33e96621231304dc1f7@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
As of the patch ("MIPS: kdb: Remove old workaround for backtracing on
other CPUs") there is no reason for kdb_current_regs to be in the
public "kdb.h". Let's move it next to kdb_current_task.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191109111623.2.Iadbfb484e90b557cc4b5ac9890bfca732cd99d77@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
5153faac18 ("cgroup: remove cgroup_enable_task_cg_lists()
optimization") removed lazy initialization of css_sets so that new
tasks are always lniked to its css_set. In the process, it incorrectly
ended up adding init_tasks to root css_set. They show up as PID 0's in
root's cgroup.procs triggering warnings in systemd and generally
confusing people.
Fix it by skip css_set linking for init_tasks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: https://github.com/joanbm
Link: https://github.com/systemd/systemd/issues/14682
Fixes: 5153faac18 ("cgroup: remove cgroup_enable_task_cg_lists() optimization")
Cc: stable@vger.kernel.org # v5.5+
Move all the tracing selftest configs to the bottom of the tracing menu.
There's no reason for them to be interspersed throughout.
Also, move the bootconfig menu to the top.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Move the config that enables the mmiotracer with the other tracers such that
all the tracers are together.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The MMIO test module was by itself, move it to the other test modules. Also,
add the text "Test module" to PREEMPTIRQ_DELAY_TEST as that create a test
module as well.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The features that depend on the function tracer were spread out through the
tracing menu, pull them together as it is easier to manage.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a test module that checks the basic functionality of the in-kernel
kprobe event command generation API by creating kprobe events from a
module.
Link: http://lkml.kernel.org/r/97e502b204f9dba948e3fa3a4315448298218787.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have trace_boot_add_kprobe_event() use the kprobe_event interface.
Also, rename kprobe_event_run_cmd() to kprobe_event_run_command() now
that trace_boot's version is gone.
Link: http://lkml.kernel.org/r/af5429d11291ab1e9a85a0ff944af3b2bcf193c7.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add functions used to generate kprobe event commands, built on top of
the dynevent_cmd interface.
kprobe_event_gen_cmd_start() is used to create a kprobe event command
using a variable arg list, and kretprobe_event_gen_cmd_start() does
the same for kretprobe event commands. kprobe_event_add_fields() can
be used to add single fields one by one or as a group. Once all
desired fields are added, kprobe_event_gen_cmd_end() or
kretprobe_event_gen_cmd_end() respectively are used to actually
execute the command and create the event.
Link: http://lkml.kernel.org/r/95cc4696502bb6017f9126f306a45ad19b4cc14f.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a test module that checks the basic functionality of the in-kernel
synthetic event generation API by generating and tracing synthetic
events from a module.
Link: http://lkml.kernel.org/r/fcb4dd9eb9eefb70ab20538d3529d51642389664.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add an exported function named synth_event_trace(), allowing modules
or other kernel code to trace synthetic events.
Also added are several functions that allow the same functionality to
be broken out in a piecewise fashion, which are useful in situations
where tracing an event from a full array of values would be
cumbersome. Those functions are synth_event_trace_start/end() and
synth_event_add_(next)_val().
Link: http://lkml.kernel.org/r/7a84de5f1854acf4144b57efe835ca645afa764f.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add functions used to generate synthetic event commands, built on top
of the dynevent_cmd interface.
synth_event_gen_cmd_start() is used to create a synthetic event
command using a variable arg list and
synth_event_gen_cmd_array_start() does the same thing but using an
array of field descriptors. synth_event_add_field(),
synth_event_add_field_str() and synth_event_add_fields() can be used
to add single fields one by one or as a group. Once all desired
fields are added, synth_event_gen_cmd_end() is used to actually
execute the command and create the event.
synth_event_create() does everything, including creating the event, in
a single call.
Link: http://lkml.kernel.org/r/38fef702fad5ef208009f459552f34a94befd860.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add an interface used to build up dynamic event creation commands,
such as synthetic and kprobe events. Interfaces specific to those
particular types of events and others can be built on top of this
interface.
Command creation is started by first using the dynevent_cmd_init()
function to initialize the dynevent_cmd object. Following that, args
are appended and optionally checked by the dynevent_arg_add() and
dynevent_arg_pair_add() functions, which use objects representing
arguments and pairs of arguments, initialized respectively by
dynevent_arg_init() and dynevent_arg_pair_init(). Finally, once all
args have been successfully added, the command is finalized and
actually created using dynevent_create().
The code here for actually printing into the dyn_event->cmd buffer
using snprintf() etc was adapted from v4 of Masami's 'tracing/boot:
Add synthetic event support' patch.
Link: http://lkml.kernel.org/r/1f65fa44390b6f238f6036777c3784ced1dcc6a0.1580323897.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
create_or_delete_synth_event() contains code to delete a synthetic
event, which would be useful on its own - specifically, it would be
useful to allow event-creating modules to call it separately.
Separate out the delete code from that function and create an exported
function named synth_event_delete().
Link: http://lkml.kernel.org/r/050db3b06df7f0a4b8a2922da602d1d879c7c1c2.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a function to get an event file and prevent it from going away on
module or instance removal.
trace_get_event_file() will find an event file in a given instance (if
instance is NULL, it assumes the top trace array) and return it,
pinning the instance's trace array as well as the event's module, if
applicable, so they won't go away while in use.
trace_put_event_file() does the matching release.
Link: http://lkml.kernel.org/r/bb31ac4bdda168d5ed3c4b5f5a4c8f633e8d9118.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
[ Moved trace_array_put() to end of trace_put_event_file() ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a new trace_array_find() function that can be used to find a trace
array given the instance name, and replace existing code that does the
same thing with it. Also add trace_array_find_get() which does the
same but returns the trace array after upping its refcount.
Also make both available for use outside of trace.c.
Link: http://lkml.kernel.org/r/cb68528c975eba95bee4561ac67dd1499423b2e5.1580323897.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
