Today in the code we have two options for collecting data sync/schedule,
the two options call the same function and can lead to racing in free
resources after done.
So we call only one of two sync/schedule, and in case of sync only
call sync function without also schedule to immediately run as a side
job.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.88574097ce1b.I1b42297619d638d677a2300ed9a95105c1262101@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Replace zero-length array with flexible-array member and make use
of the struct_size() helper in kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220216030841.1839666-1-chi.minghao@zte.com.cn
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220209032322.37472-1-cai.huoqing@linux.dev
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Due to preg protection we cannot write to this register
while FW is running (when FW in Halt it is ok).
since we have some cases that we need to dump this
region while FW is running remove this writing from DRV.
FW will do this writing.
Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Fixes: 89639e06d0 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.209f3078bc74.I463530bd2f40daedb39f6d9df987bb7cee209033@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Until now function just got a pointer to some buffer and used it as if
it's good to use with no boundaries about size left in the buffer.
This infra helps for internal functions ops to make sure buffer usage
is in bound of allocation.
We also add external checks with warnings to verify every internal
function didn't exceed usage of the free buffer size.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.25c90fb14968.Ic8f05581a745d08011ca29b3f42767402643e8c5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The original implementation checked the HW family, and as a result
of that used different addresses for the prph registers.
The old HWs addresses start with 0xa****** and the newer
ones start with 0xd******.
For this there are iwl_read/write_umac_prph functions that just add the
diff in the address automatically (in this case 0x300000), so the code will
be common for all HWs
In the original implementation the address given already had the 0xd******
causing the address to become 0x10***** (after adding the offset)
Change the registers to start with 0xa*****.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.db2722547eb2.I03dce63698befc2fd9105111c3015b8d6e36868a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In next region tlv (3) region type is going to be split into bit mask
without affecting the ops for handling region type, so we just mask
the type independent of the version due to all versions having the
same bits usage.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204130722.083e4b47055e.If7483d854e3d07f81236d314b8155cd5996f306c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We have a MAC component (which is inside the SoC) and it has several
different HW steps. 3 bits used to be enough but now we need 4-bits
to represent all the different steps.
Properly support 4-bits in the MAC step value by refactoring all the
current handling of the MAC step/dash.
Already from family 8000 and up the dash (bits 0-1) no longer exists
and the step (until 8000 bits 2-3) consists of the dash bits as well.
To do this remove the CSR_HW_REV_STEP and the CSR_HW_REV_DASH
macros, replace them with CSR_HW_REV_STEP_DASH and add hw_rev_step
into the trans struct.
In addition remove the CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP and
CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH macros and create a new macro
combining the 2 (this way we don't need shifting or anything else.)
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Mike Golant <michael.golant@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211207160459.2e81a14d1f80.Ia5287e37fb3439d805336837361f6491f958e465@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In firmware dumps, currently all kinds of key material may be
included, e.g. in host commands (if firmware crashes during the
processing of a key-related command) or in the TX FIFO(s) if
we have been using in-TX-command key material.
Additionally, some firmware versions will advertise sections
of their internal data to not dump, due to them containing some
sensitive data.
Add some infrastructure to allow scrubbing this data out, as
dependent on the opmode's idea of what will need to be done.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.360cc8fe55b1.Ie3bd3ece38043969f7e116e61a6ec1197a58d78b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When having a blank OTP the only way to get the rf id
and the cdb info is from prph registers.
Currently there is some implementation for this, but it
is located in the wrong place in the code (should be before
trying to understand what HW is connected and not after),
and it has a partial implementation.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.820c2ae18c2b.Iec9b2e2615ce65e6aff5ce896589227a7030f4cf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The debug dump ranges aren't just an array of such ranges
since each range has a variable size. Therefore, the use
of a struct array is misleading at best.
Change it to be a u8 data[] instead of the struct array,
the code doesn't significantly change since it's actually
doing things correctly now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210819183728.693c9891097d.Idcaab1fd659e8be2f56be647b2534befd61a4460@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In commit 79f033f6f2 ("iwlwifi: dbg: don't limit dump decisions
to all or monitor") we changed the code to pass around a bitmap,
but in the monitor_only case, one place accidentally used the bit
number, not the bit mask, resulting in CSR and FW_INFO getting
dumped instead of monitor data. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210805141826.774fd8729a33.Ic985a787071d1c0b127ef0ba8367da896ee11f57@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Conceptually, this belongs more into the firmware utils
rather than the mvm opmode, so move the collection and
output there.
Note that this slightly changes the format of the Status
line.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.b82b60d81346.Ide3b688107f6a59c7fc7eb1d8f2002b0a5c1f2d2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Return value of the iwl_mvm_load_nvm_to_nic func is not analyzed. If load
NVM to nic func fails and NVM is not loaded to fw properly, then fw may
behave badly and lead to some strange issue. This commit will analyze
return value and if load NVM to nic has failed, then the error code is
sent to the previous func, which will trigger WRT log collection.
iwl_fw_dbg_error_collect() func collects dump only if tri type is
FW_DBG_TRIGGER_ALIVE_TIMEOUT. But when Load NVM to nic function fails
trig_type is FW_DBG_TRIGGER_DRIVER. This commit also has code changes to
collect dump when trig_type is FW_DBG_TRIGGER_DRIVER.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.32998850192a.Ic58d08cb6944ca55e343ff0032c82cfa7821e588@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In case user requested to register an unsupported regions,
remove it from active list and trigger list, this saves operational
driver memory and run time at collecting debug data.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210142629.a0cc944040e8.I3ae37547452b39f8040428c21ed47bdc67ae8f71@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlwifi/fw/dbg.c:1932: warning: Function parameter or member 'reg_data' not described in 'iwl_dump_ini_mem'
drivers/net/wireless/intel/iwlwifi/fw/dbg.c:1932: warning: Excess function parameter 'reg' description in 'iwl_dump_ini_mem'
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Intel Linux Wireless <linuxwifi@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201126133152.3211309-15-lee.jones@linaro.org
IWL_WARN seems excessive here since this can happen during normal
operation. Every time I connect to a new network with 8086:24fd I get
this as KERN_WARNING on the console, which mildly distracts from other
more pressing messages. For example:
% sudo journalctl _TRANSPORT=kernel | grep -c 'FW already configured'
403
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20191017144841.GA16393@chrisdown.name
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There are several "flavors" of HW that have the same HW type, but
can be told apart after reading a certain perph register. This
is easy to do in runtime, but more complicated to do when looking
at the logs offline.
To make it easier to tell apart these "flavors" when looking at
the dumped dbg info, add these bits to the HW type, allowing
simple differentiation.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200425130140.330ea11d17ae.Ie59b25430a308090b15112ac6deedf4fbf487ff1@changeid
Third set of patches for v5.7. Nothing really special this time,
business as usual.
When pulling this to net-next there's again a conflict in:
drivers/net/wireless/intel/iwlwifi/pcie/drv.c
To solve this drop these three lines from the conflict (the first hunk
from "HEAD") as the whole AX200 block was moved above in the same
file:
IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name),
IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name),
IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name),
And keep all the __IWL_DEV_INFO() entries (the second hunk). In other
words, take everything from wireless-drivers-next. When running 'git
diff' after the resolution the output should be empty.
Major changes:
brcmfmac
* add USB autosuspend support
ath11k
* handle RX fragments
* enable PN offload
* add support for HE BSS color
iwlwifi
* support new FW API version
* support for EDCA measurements
* new scan API features
* enable new firmware debugging code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJefdsZAAoJEG4XJFUm622blekH/2fIoUtl8Kdih38hNjz63PLD
x+LCPjZdRjrmFGTSxnS1rZiIM7v2yXyLGiyq+yr2ltzkpTi8xWOkKL6US8RCew9R
otRtZyLrhgMLG2ExDna1fI5ZJAtLnxV31TCy6yrSUDZ8t4VxMNIB4si3WRzKvAfU
c+cQcsnWr+pCDnbxh53BcYIyiEqKlttw/fGuIKchKuYMQy7DV6nxMdTaAym5Szzi
Nlb8fhXWFaPrPQ6NtHb5WWm4Er3wtMzN/AG8aFVxjrik07vTxQKWamdT9CeK2tDT
iDbx2HaNCWFMulXeZMrc9+inoAzj3UjbPqH3OTUk9iHbVA0unc3CdEBFD9h928Q=
=D/FA
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2020-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.7
Third set of patches for v5.7. Nothing really special this time,
business as usual.
When pulling this to net-next there's again a conflict in:
drivers/net/wireless/intel/iwlwifi/pcie/drv.c
To solve this drop these three lines from the conflict (the first hunk
from "HEAD") as the whole AX200 block was moved above in the same
file:
IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name),
IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name),
IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name),
And keep all the __IWL_DEV_INFO() entries (the second hunk). In other
words, take everything from wireless-drivers-next. When running 'git
diff' after the resolution the output should be empty.
Major changes:
brcmfmac
* add USB autosuspend support
ath11k
* handle RX fragments
* enable PN offload
* add support for HE BSS color
iwlwifi
* support new FW API version
* support for EDCA measurements
* new scan API features
* enable new firmware debugging code
====================
Kalle gave me directions on how to resolve the iwlwifi conflict
as follows:
====================
When pulling this to net-next there's again a conflict in:
drivers/net/wireless/intel/iwlwifi/pcie/drv.c
To solve this drop these three lines from the conflict (the first hunk
from "HEAD") as the whole AX200 block was moved above in the same
file:
IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name),
IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name),
IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name),
And keep all the __IWL_DEV_INFO() entries (the second hunk). In other
words, take everything from wireless-drivers-next. When running 'git
diff' after the resolution the output should be empty.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When we have an assert during D3 we want to dump the internal
buffer memory even if are we working in DRAM debug mode. We should not
block dumping it.
Change-Id: I69aad2d4904c4f8bb653c61e8781a2e07780054f
Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add a new region type that allows us to dump the PCI config space.
This is mostly the same as dumping a memory region, but reading from
the device's config space instead.
In order to make this generic and independent of the trans type, we
make a function called iwl_dump_ini_config_iter() that calls a new op
in the transport to read its config space.
Change-Id: I15151bddf589f13b0e0a45c28b96bbcd73bcfdeb
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
