It's easier to use and understand, and to extend for EHT later,
if we use the values here instead of the shifted values.
Unfortunately, we need to add _POS so that we can use it in
places like iwlwifi/mvm where constants are needed.
While at it, fix the typo ("NOMIMAL") which also helps catch any
conflicts.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/r/20211126104817.7c29a05b8eb5.I2ca9faf06e177e3035bec91e2ae53c2f91d41774@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Read the rfkill state upon boot, mac start and mac stop.
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-6-emmanuel.grumbach@intel.com
Add the vendor commands that must be used by the network manager
to allow proper operation of iwlmei.
* Send information on the AP CSME is connected to
* Notify the userspace when roaming is forbidden
* Allow the userspace to require ownership
Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
v6: remove the VENDOR_CMDS Kconfig option and make the whole infra
depend on IWLMEI directly
v7: remove // comments
remove an unneeded function
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-5-emmanuel.grumbach@intel.com
iwlmei needs to know about the follwing events:
* Association
* De-association
* Country Code change
* SW Rfkill change
* SAR table changes
iwlmei can take the device away from us, so report the new
rfkill type when this happens.
Advertise the required data from the CSME firmware to the
usersapce: mostly, the AP that the CSME firmware is currently
associated to in case there is an active link protection
session.
Generate the HOST_ASSOC / HOST_DISSASSOC messages.
Don't support WPA1 (non-RSNA) for now.
Don't support shared wep either.
We can then determine the AUTH parameter by checking the AKM.
Feed the cipher from the key installation.
SW Rfkill will be implemented later when cfg80211 will
allow us to read the SW Rfkill state.
Co-Developed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
v7: Ayala added her signed-off
remove pointless function declaration
fix a bug due to merge conflict in the HOST_ASSOC message
v8: leave a print if we have a SAP connection on a device we do
not support (yet)
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211112062814.7502-4-emmanuel.grumbach@intel.com
Fix warnings produced by:
- lockdep_assert_wiphy() in function reg_process_self_managed_hint(),
- wiphy_dereference() in function iwl_mvm_init_fw_regd().
Both function are expected to be called in critical section.
The warnings were discovered when running v5.15 kernel
with debug options enabled:
1)
Hardware name: Google Delbin/Delbin
RIP: 0010:reg_process_self_managed_hint+0x254/0x347 [cfg80211]
...
Call Trace:
regulatory_set_wiphy_regd_sync+0x3d/0xb0
iwl_mvm_init_mcc+0x49d/0x5a2
iwl_op_mode_mvm_start+0x1b58/0x2507
? iwl_mvm_reprobe_wk+0x94/0x94
_iwl_op_mode_start+0x146/0x1a3
iwl_opmode_register+0xda/0x13d
init_module+0x28/0x1000
2)
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:263 suspicious rcu_dereference_protected() usage!
...
Hardware name: Google Delbin/Delbin, BIOS Google_Delbin
Call Trace:
dump_stack_lvl+0xb1/0xe6
iwl_mvm_init_fw_regd+0x2e7/0x379
iwl_mvm_init_mcc+0x2c6/0x5a2
iwl_op_mode_mvm_start+0x1b58/0x2507
? iwl_mvm_reprobe_wk+0x94/0x94
_iwl_op_mode_start+0x146/0x1a3
iwl_opmode_register+0xda/0x13d
init_module+0x28/0x100
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Łukasz Bartosik <lb@semihalf.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211110215744.5487-1-lukasz.bartosik@semihalf.com
In some very rare cases the init flow may fail. In many cases, this is
recoverable, so we can retry. Implement a loop to retry two more times
after the first attempt failed.
This can happen in two different situations, namely during probe and
during mac80211 start. For the first case, a simple loop is enough.
For the second case, we need to add a flag to prevent mac80211 from
trying to restart it as well, leaving full control with the driver.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211110150132.57514296ecab.I52a0411774b700bdc7dedb124d8b59bf99456eb2@changeid
When we receive an association response, a significant amount
of time might have passed since we sent the corresponding
association request (mac80211 will wait up to 500ms for the TX
and then 100ms for the response after ACK was received). But
the time event is touched only when we send the assoc request,
so it might not have much time remaining, more easily causing
the (dreaded)
No beacon heard and the session protection is over already...
message.
Refactor iwl_mvm_mac_mgd_prepare_tx() and split out a new
function iwl_mvm_protect_assoc(), and call it on successful
association to extend the time event to the minimum time if
necessary.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.411c174d9e5e.I03c701c2e9e6788f34546e538264763db0ab30ef@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If we somehow get disassociated while still waiting for a beacon
during connection, we can end up printing the
No beacon heard and the session protection is over already...
message even if we aren't really quite waiting for it anymore.
Remove the time event, if it's running, when we get disassociated
and don't need to wait for beacons anymore.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.6192e2363784.Ie9c2bfdc30dcfff2c4dd7c393c79e3ac182840a9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When this code was implemented, there was no official FW API
description yet, so a placeholder name was used (GEO_TX_POWER_LIMIT).
But then the command became actually called
PER_CHAIN_LIMIT_OFFSET_CMD. Rename the command (and change related
comments) to PER_CHAIN_LIMIT_OFFSET_CMD to avoid confusion.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.672fa727ef75.I6572df5d1e3441a0214993a59985da9a9431f3e5@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Trying to convert from one firmware data representation to the
next version is getting tedious and error-prone, and doesn't
lend itself well to new APIs being added. Additionally, the
version 11 of the API as defined in the driver doesn't even
exist in the firmware.
Instead of converting to a newer firmware version of the data,
convert to an internal representation. This takes a bit more
space because the TKIP/AES counters etc. must be kept twice,
their representation is different and we don't know which of
the ones it is until later, but this is just a temporary use
of memory, and the code is clearer this way.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024181719.9e71630627f3.Iad975e15338844ca068683f62a51eb1fcb69e608@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's a new revision of the WGDS table with more data,
and corresponding firmware API to pass it through. Add
support for both.
Since we now support 4 different versions, make a table
to load them instead of hard-coding it all.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.2f9b8e304f25.If88d2d1309270e659d4845c5b5c22d5e8d8e2caf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
To improve chances of hearing beacons and probe responses during
a scan which (based on the scan request parameters) looks like a
roaming scan, enable reception on all chains.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211024165252.f115ad455aca.I5de854fe8ce58c85c21a7adf43526acb29156a08@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Read the bitmap from the ACPI and pass it to he FW
through LARI_CONFIG_CHANGE_CMD.
This allows OEMs to override channel state to active
as per Geo Location bitmap.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.23d4f2d182c0.I39ac5ff74ac6f2223f393657205eddc1c8e48890@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sometimes driver fails to detect misbehaving AP since we may
miss a few beacons (AP is declared misbehaving only after the second
time CSA counter has a wrong jump).
Move the print to the start of the function to avoid doubts when
analysing this kind of issues.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.8e6b1eb8a436.I5fd6caee968007e91d03b93d6ea84b670ce047e9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Set BT coex high priority during the 802.1X handshake to avoid
issues where BT is active enough to kill all the big negotiation
frames that we may need to send (e.g. with a large certificate),
leading to the connection not being established correctly. Give
WiFi priority over BT during this short but critical phase.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.a1825bbba397.I10315577fb41dfcec15c92e8f6785d9655f74c6a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Code tried to avoid setting ACs for PS-poll by an early return.
However as a result the timeouts weren't set as well.
Inactivity timeout of zero means we will always try to go back to
sleep immediately after moving to AM, which doesn't make much sense,
and isn't supported by FW.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017165728.dda7f6ba0b22.Ia107bfe496b84e8a2edb33d9f39a5d2b56ed63f7@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Evidently, it's possible to hit this issue, so reduce the
noise from it by just having it print a (rate-limited)
message instead. We don't really know yet why we hit it,
but there's no value in having a WARN_ON() here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.8d503387b523.Id2c82d023df5128e553b28c935d30df4d9411917@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When auth/assoc completes, we should remove session protection,
except when association is successful, where we need it until a
beacon is received from the AP.
In particular, in the case of assoc comeback, currently the session
protection event just times out, leading to confusing messages:
wlan0: 42:00:00:00:00:00 rejected association temporarily; comeback duration 1000 TU (1024 ms)
iwlwifi 0000:00:00.0: Not associated and the session protection is over already...
wlan0: Connection to AP 42:00:00:00:00:00 lost
wlan0: associate with 42:00:00:00:00:00 (try 2/3)
mac80211 never does anything on the "Connection ... lost" as it's
not even connected.
Removing the session protection when it's no longer needed removes
those confusing messages and lets the device do other things in the
allocated time.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.95e4bebb069b.I635280e5d26c70414ac6eb5d62b46fe4bd942818@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Remove the unused csi parameter from
iwl_mvm_pass_packet_to_mac80211(). It is not used anymore, but was
accidentally left in.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20211017132604.480251-2-luca@coelho.fi
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags this two APIs
may use the new rate. Add support for the new rate.
These two APIs were updated in one patch because both of them
are using the same functions which were changed.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.7eb6240b8079.I1e804e70a8ebd23840a9431fc5d2a56ad8d5d1a2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, a new version of this
structures was added in the FW. Add support for this new
version and for the new rate_n_flags in this API.
Both these APIs were updated in one patch since they are
using the same functions.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.a28e7a92f558.I19f72735c674f815c6e7c11cecfad6230b4510ef@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, a new version of
BEACON_TEMPLATE_CMD was added in FW in order to support
the new rate_n_flags.
Add support for the new version.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017162352.b42e67f14293.Ic3f1ed8cb3a31cfaa51174497dd993936b00d398@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, FW added a new version for
LOCATION_RANGE_RSP_NTFY, and it's internal structure -
LOCATION_RANGE_RSP_AP_ETRY_NTFY. Add support for this.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.c5c6c863631e.I4b493f4eeabbfa1dc965ae012b72fc57de7d5f4f@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate_n_flags, a new version of tlc_update_notif
was added in FW in order to support the new rate_n_flags.
Add support for the new version, and move the all API to use the
new rate_n_flags only (if FW supports the old one - convert it).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.9fc0cb5d5898.I1f88e02317f79f1be7f792c01236d836045a44b3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
As part of the new rate & flags, convert an old format rate to
the new. This is needed if the driver supports the new format
but the FW supports the old one.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.1ea5263dafec.Iadffe7cb26554d4c23c9242eb2ec8326306202a9@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Use the previously added infrastructure to scrub key material
in firmware dumps:
* in the TX FIFO data, just search for each key that we
know about and override such data
* scrub various commands that we sent to the firmware if
they're present
* in firmware memory, where advertised by firmware TLVs
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.d1514964e6a7.I18f8c2ce8082952af7cfe5f8fe75fe51851b8853@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In firmware dumps, currently all kinds of key material may be
included, e.g. in host commands (if firmware crashes during the
processing of a key-related command) or in the TX FIFO(s) if
we have been using in-TX-command key material.
Additionally, some firmware versions will advertise sections
of their internal data to not dump, due to them containing some
sensitive data.
Add some infrastructure to allow scrubbing this data out, as
dependent on the opmode's idea of what will need to be done.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.360cc8fe55b1.Ie3bd3ece38043969f7e116e61a6ec1197a58d78b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Consensus seems to be emerging that corporations or groups
shouldn't be listed as module authors, and we will not
maintain this email address any longer. Just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.32109514aad0.I91a7d745f4ab50ee8ef918ece00dda8251541595@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Just like we have default SMPS mode as dynamic in powersave,
we should not enable RX-diversity in powersave, to reduce
power consumption when connected to a non-MIMO AP.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We should consider the P2P interface type, which isn't in
vif->type due to mac80211's special handling of that. Use
ieee80211_vif_type_p2p() to convert appropriately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.8e992a3beee2.I4231ac8a7ae8f844e35a1ec221baf3e2b676e765@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If resume fails for some reason, we need to set the PM state
back to normal so we're able to send commands during firmware
reset, rather than failing all of them because we're in D3.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 708a39aaca ("iwlwifi: mvm: don't send commands during suspend\resume transition")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211016114029.7ceb9eaca9f6.If0cbef38c6d07ec1ddce125878a4bdadcb35d2c9@changeid
This code was refactored and the mutex_unlock(&mvm->mutex); was
accidentally deleted.
Fixes: af3aab9ce2 ("iwlwifi: mvm: d3: make key reprogramming iteration optional")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210831081849.GB9846@kili
These should be >= ARRAY_SIZE() instead of > ARRAY_SIZE() to prevent an
out of bounds write on the next line.
Fixes: 79e561f0f0 ("iwlwifi: mvm: d3: implement RSC command version 5")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210831081802.GA9846@kili
In __iwl_mvm_remove_time_event() check that 'te_data->vif' is NULL
before dereferencing it.
Fixes: 7b3954a1d6 ("iwlwifi: mvm: Explicitly stop session protection before unbinding")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210907143156.e80e52167d93.Ie2247f43f8acb2cee6dff5b07a3947c79a772835@changeid
Due to a rebase damage, we lost the rtnl_lock() when the patch was
sent out. This causes an RTNL imbalance and failed assertions, due to
missing RTNL protection, for instance:
RTNL: assertion failed at net/wireless/reg.c (4025)
WARNING: CPU: 60 PID: 1720 at net/wireless/reg.c:4025 regulatory_set_wiphy_regd_sync+0x7f/0x90 [cfg80211]
Call Trace:
iwl_mvm_init_mcc+0x170/0x190 [iwlmvm]
iwl_op_mode_mvm_start+0x824/0xa60 [iwlmvm]
iwl_opmode_register+0xd0/0x130 [iwlwifi]
init_module+0x23/0x1000 [iwlmvm]
Fix this by adding the missing rtnl_lock() back to the code.
Fixes: eb09ae93da ("iwlwifi: mvm: load regdomain at INIT stage")
Link: https://lore.kernel.org/lkml/CAHk-=wjB_zBwZ+WR9LOpvgjvaQn=cqryoKigod8QnZs=iYGEhA@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To check beacon protection had a mismatch of the key ID we
currently use the key ID from the firmware, but firmware
side we want to clean up the API to stop reporting this.
Instead, check the IWL_RX_MPDU_STATUS_KEY_VALID bit that
indicates that the firmware used the correct key, and if
that's set but we get invalid MIC/replay use the key ID
from the frame to look up the key and notify mac80211 of
MIC error or replay. Since both keys must have the same
cipher and thus MIC length, we can use either of them to
look up the MIC length.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210826224715.30e665d39b07.I78bf7d304ef5a80cecf5fa1c1fca0b51b956cceb@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
