1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
Commit graph

548 commits

Author SHA1 Message Date
Jiri Kosina
4b7bd36470 Merge branch 'master' into for-next
Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.
2010-12-22 18:57:02 +01:00
Bruno Randolf
3de135dba9 ath5k: Set available antenna information for cfg80211
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20 14:49:47 -05:00
Bruno Randolf
f15a4bb263 ath5k: Fix survey
The old survey implementation was broken and returned nonsense data.

Clear cycle counters and survey data on reset. Since the cycle counters easily
overflow it's better to keep a local version of collected survey data (in ms
resolution, instead of clockrate) and update this every time survey is
retrieved. If survey is retrieved often enough to avoid cycle counter overflows
this works fine, otherwise we could update survey more often, like ath9k does.
Still only the survey for the current channel is kept.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16 15:22:32 -05:00
Sedat Dilek
b7ee1d01c5 ath5k: Fix modinfo does not list alias -> pci-id lines
The AHB bus support patchset moved the table "Known PCI ids" from base.c
to pci.c - unfortunately, MODULE_DEVICE_TABLE() was not transferred.
With this fix 'modinfo ath5k' lists the alias -> pci-id lines, again.

The issue was introduced by:
   commit e5b046d86f
   "ath5k: Move PCI bus functions to separate file."

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-09 08:53:42 -05:00
John W. Linville
393934c6b5 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
Conflicts:
	drivers/net/wireless/ath/ath9k/ath9k.h
	drivers/net/wireless/ath/ath9k/main.c
	drivers/net/wireless/ath/ath9k/xmit.c
2010-12-08 16:23:31 -05:00
Javier Cardona
b93996cf67 ath5k: Put the right tsf value in mesh beacons
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08 15:23:46 -05:00
Javier Cardona
c26d533942 ath5k: Prevent mesh interfaces from being counted as ad-hoc
This results in an erroneus num_adhoc_vifs count, as the this counter
was incremented but not decremented for mesh interfaces.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08 15:23:45 -05:00
Javier Cardona
d82b577b8c ath5k: Fix beaconing in mesh mode
This patch fixes the oops below when attempting to bring up a mesh
interface on ath5k hardware.

[  128.933099] kernel BUG at drivers/net/wireless/ath/ath5k/base.c:197!
[  128.933099] invalid opcode: 0000 [#1]
(...)
[  128.933099] Call Trace:
[  128.933099]  [<c83b77fa>] ? ath5k_beacon_update+0x57/0x1f8 [ath5k]
[  128.933099]  [<c02d9a40>] ? __sysfs_add_one+0x28/0x76
[  128.933099]  [<c83b830e>] ? ath5k_bss_info_changed+0x13f/0x173
[ath5k]
[  128.933099]  [<c82ff629>] ? ieee80211_config_beacon+0xc0/0x17e
[mac80211]
[  128.933099]  [<c82f073e>] ?
ieee80211_bss_info_change_notify+0x182/0x18b [mac80211]
[  128.933099]  [<c83b81cf>] ? ath5k_bss_info_changed+0x0/0x173 [ath5k]
[  128.933099]  [<c82ff6d6>] ? ieee80211_config_beacon+0x16d/0x17e
[mac80211]
[  128.933099]  [<c82ff753>] ? ieee80211_add_beacon+0x34/0x39 [mac80211]
[  128.933099]  [<c830a4ed>] ? ieee80211s_init+0xf8/0x10f [mac80211]
[  128.933099]  [<c830a5df>] ? ieee80211_mesh_init_sdata+0xdb/0x154 [mac80211]

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08 15:23:44 -05:00
Bruno Randolf
22d8d9f81b ath5k: Use capabilities information for the number of TX queues
One thing I missed in my WME series: Older hardware does not have enough
hardware queues to support WME. In this case we just set up one data queue. Use
the capability information to decide how many queues to set up.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07 17:07:54 -05:00
John W. Linville
b7555ec7c6 ath5k: remove MODULE_VERSION
Since this is updated manually and sporadically, it is fairly useless
anyway.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07 16:34:49 -05:00
Joe Perches
226afe68fd ath: Convert ath_print to ath_dbg
Remove ath/debug.h and the includes of these files.
Coalesce long formats.
Correct a few misspellings and missing "\n"s from these logging messages.
Remove unnecessary trailing space before a newline.
Remove ARRAY_SIZE casts, use printf type %zu

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07 16:34:48 -05:00
Nick Kossifidis
b9e61f11f4 ath5k: Include tx ack reporting on hw flags
* Since we report tx acks to the protocol stack, add the needed
 flag to hw_flags. This way we'll also use the new AP probing mechanism.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-06 16:01:28 -05:00
Nick Kossifidis
f0e134a53a ath5k: Fix reporting of RX dma stop failure
* Correctly report failure to stop RX DMA

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-06 16:01:27 -05:00
Nick Kossifidis
344b54b971 ath5k: Disable ANI during reset
* Stop ANI durring reset to prevent false PHY error reports

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-06 16:01:27 -05:00
Nick Kossifidis
19252ecb67 ath5k: Always free tx buffers before reset
* Always free tx buffers before reset, since we also empty hw queues.
 If we don't and a queue gets stuck, we'll never decrease txq_len and sw
 will keep thinking the queue is still stuck even after reset.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-06 16:00:23 -05:00
Nick Kossifidis
d84938c9be ath5k: Always write tx powertable on hw
* By skipping tx power table calibration we also skip setting
 tx power table on hw. Make sure we always write tx power table
 on hw since it gets cleared on reset.

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-06 15:58:44 -05:00
Bruno Randolf
5dcc03fe29 ath5k: Use EWMA factor of 1024 instead of 1000
This prepares the only place which uses the EWMA library so far for the
performance improved implementation coming up, which requires factor and
weight to be a power of two.

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-06 15:58:43 -05:00
Felix Fietkau
4cebb34caa ath5k: Fix reset and interrupts for AHB type of devices.
On WiSoc we cannot access mac register before it is resetted.
It will crash hardware otherwise.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02 15:17:51 -05:00
Felix Fietkau
a0b907ee2a ath5k: Add AHB bus support.
AHB specific functions are now in ahb.c file. AHB bus is
compiled in when CONFIG_ATHEROS_AR231X is set in kernel.
All other platforms will use PCI bus.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02 15:17:51 -05:00
Felix Fietkau
c31b5c9c80 ath5k: Add initial registers values for radio RF2317 chip.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02 15:17:51 -05:00
Felix Fietkau
e7aecd327d ath5k: Add a function to read chipset's MAC revision
Add bus dependent revision read function which is used to
determine chipset's MAC before hardware is initialized.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02 15:17:51 -05:00
Felix Fietkau
8efa5d7d6a ath5k: Check if pci pdev struct is initialized in common functions.
To be able to support other busses than PCI check if pci device
structure is initialized.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02 15:17:50 -05:00
Felix Fietkau
4aa5d783c9 ath5k: Use generic eeprom read from common ath_bus_opts struct.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02 15:17:50 -05:00
Felix Fietkau
e5b046d86f ath5k: Move PCI bus functions to separate file.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02 15:17:50 -05:00
Felix Fietkau
132b1c3ee3 ath5k: Introduce ath5k_init_softc function as in ath9k
Split pci initialization into hardware specific
functions and softc structure initialization.
Make function naming similar to ones ath9k.
Introduce ath_bus_opts in ath5k for later
AHB bus integration.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02 15:17:50 -05:00
Felix Fietkau
aeae4ac909 ath5k: Use Generic DMA for later support of AHB bus.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02 15:17:50 -05:00
Nick Kossifidis
4352fab5c2 ath5k: Set turbo bit on rf bank 2
* A diff between rfbuffer settings of turbo and non-turbo
 modes indicates there is a bit on bank 2 related to turbo operation
 (it's set on turbo modes). This bit is present on all radios except
 RF5413 that seems to have a completely different bank 2. Also
 since 2317 has the same rf-registers locations with 2425 and
 since the bit exists on 2317 I assume it also exists on 2425/2417).
 So in case we use turbo mode (40MHz) enable it on bank modification.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:45 -05:00
Nick Kossifidis
8c2b418a07 ath5k: Clean up turbo mode initvals/rfregs
* Clean up what's left of turbo mode, since we handle all
 register modifications (rfbuffer comes next) on code there
 is no need to have duplicated arrays.

 * Rename change_channel to skip_pcu on initvals.c as we did
 on reset.c

 Signed-off-by: Nick Kossifidis <micklfemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:45 -05:00
Nick Kossifidis
acb091d67c ath5k: Cleanup turbo channel flags
* Clean up CHANNEL_T(URBO), use AR5K_BWMODE_40MHZ instead

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:45 -05:00
Nick Kossifidis
73a06a6834 ath5k: Use correct clock when setting ofdm timings
* Use correct clock value when setting OFDM timings on
 non-default bwmodes.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:44 -05:00
Nick Kossifidis
3bb1765460 ath5k: Skip tx power setting on AR5210 for now
* Don't return -EINVAL when trying to set tx power
 on RF5110 because AR5210 reset will fail. We need to
 add support for RF5110 and AR5210 eeprom in the future
 but for now just skip it.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:44 -05:00
Nick Kossifidis
b02f5d1a17 ath5k: Tweak phy activate to rx start delay based on bwmode
* Tweak phy activation -> rx delay for different bwmodes

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:44 -05:00
Nick Kossifidis
c2b0ebef26 ath5k: No need to save/restore staid flags on reset
* Since we set antenna flags on phy init and ack bitrate
 mode on pcu init, there is no need to save/restore sta_id
 flags on ath5k_hw_reset. Also we don't need to re-set our
 mac address because it's not affected by resets.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:43 -05:00
Nick Kossifidis
8aec7af99b ath5k: Support synth-only channel change for AR2413/AR5413
* Add synth-only channel change for AR2413/5413. When we call
 ath5k_reset with a channel ath5k_hw_reset will first try to
 set channel on PHY while PHY is running instead of doing a normal
 full reset. To do this phy_init has to change to implement this
 functionality.

 * Clean up change_channel flag, what it really did was skip PCU
 registers when setting initvals. This is done because on reset
 PCU registers are not affected (except the registers we set
 in pcu init and -due to hw problems- TSF). Use a new skip_pcu
 flag that's not misleading instead. In the future we might use
 that to also skip PCU reset and save us the TSF etc problems
 (needs testing because standard practice is to reset everything).

 * Use fast channel change only when setting channel, and set skip_pcu
 to false only on init. When we reset the card due to DMA or PHY
 problems skip pcu but never do a fast channel change.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:43 -05:00
Nick Kossifidis
4c57581d93 ath5k: Skip powertable setting when we are on the same channel
* Only set power table if we are changing channel/mode
 there is no need to recalculate and reset the power table
 all the time.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:24 -05:00
Nick Kossifidis
f08fbf6cf4 ath5k: Update PLL programming for turbo/half/quarter
* Set correct PLL settings for each bwmode

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:23 -05:00
Nick Kossifidis
a2677fe429 ath5k: Update spur mitigation filter for turbo/half/quarter
* Add spur mitigation filter support for half/quarter and turbo.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:23 -05:00
Nick Kossifidis
b2b4c69f68 ath5k: Tweak power detector delays on RF5111/RF5112
* Tweak power detector delays on AR5111/AR5112 when
 using half/quarter modes.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:23 -05:00
Nick Kossifidis
71ba1c3085 ath5k: Always set IFS intervals on reset
* Make sure we always set IFS timings even if no
 coverage class is set. If we don't we'll miss the
 needed changes for different bwmodes.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:22 -05:00
Nick Kossifidis
473cae2762 ath5k: Use turbo flag on DCU
* Set AR5K_DCU_GBL_IFS_MISC_TURBO_MODE flag on DCU when operating
 on 40MHz

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:22 -05:00
Nick Kossifidis
eeb8832b31 ath5k: Set all IFS intervals, not just slot time
* Replace set_slot_time with set_ifs_intervals that also sets
 the various inter-frame space intervals based on current bwmode.

 * Clean up AR5210 mess from reset_tx_queue, AR5210 only has one
 data queue and we set IFS intervals for that queue on set_ifs_intervals
 so there is nothing left to do for 5210 on reset_tx_queue.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:21 -05:00
Nick Kossifidis
61cde03723 ath5k: Extend rate_duration
* Extend ieee80211_generic_frame_duration to support the various
 bwmodes.

 * Better document what's going on with ack bitrates and update
 write_rate_duration to support the standard ack bitrates (when
 we don't set the high bit).

 * Get rid of set_ack_bitrate_high and introduce a flag on ath5k_hw
 for this (we only called the function on init anyway so there is no
 difference).

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:53:21 -05:00
Nick Kossifidis
3017fcab41 ath5k: Extend get_default_sifs/slot_time
* Extend get_default_sifs/slot_time to include timings for turbo
 half and quarter rate modes.

 * AR5210 code for now uses timings already on core clock units
 instead of usecs so rename them (we 'll clean it up later).

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:52:35 -05:00
Nick Kossifidis
25ddfa1957 ath5k: Move tx retries setting outside reset_tx_queue
* Move setting of tx retry limits on a separate function
 (we 'll clean up this AR5210 mess later)

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:52:35 -05:00
Nick Kossifidis
b405086ba4 ath5k: Increase PHY settling parameters for turo mode
* On turbo mode increase PHY settling times, note that
 we only increase switch settling time on AR5212 as indicated
 by initvals.

 * A few cleanups: Move frame control settings for AR5210 from
 reset_tx_queue to tweak_initvals and remove phy_scal settings
 from tweak_initvals (we tweak them alread on set_sleep_clock).

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:52:34 -05:00
Nick Kossifidis
325089ab58 ath5k: Small cleanup on tweak_initvals
* Now that we properly set rx/tx latencies for AR5311 remove
 that old buggy part of code left inside ath5k_hw_tweak_initval_settings
 that was never executed (you can't have an RF5112 radio on a mac older
 than AR5212). Also use a magic value for 5311 PHY_SCAL value.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:52:34 -05:00
Nick Kossifidis
c297560206 ath5k: Put core clock initialization on a new function
* Handle all usec parameters in one function. It's much cleaner
 this way.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:52:33 -05:00
Nick Kossifidis
fa3d2feeff ath5k: Add new field on ath5k_hw to track bandwidth modes
* Prepare for half/quarter/turbo support, introduce a new
 ah_bwmode parameter and get rid of ah_turbo. Bwmode stands
 for "bandwidth mode" and can have 4 values, default (20MHz),
 turbo (40MHz), half rate (10MHz), and quarter rate (5MHz).

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:52:33 -05:00
Nick Kossifidis
14fae2d4b6 ath5k: Use new function to stop beacon queue
* Since we only use ath5k_hw_stop_tx_dma to stop the beacon
 queue, introduce a new function ath5k_hw_stop_beacon_queue so
 that we can use that instead and have better control. In the future
 we can add more beacon queue specific stuff there (maybe tweak
 beacon timers or something), for now just call ath5k_hw_stop_tx_dma.

 * Also since we don't call ath5k_hw_stop_rx/tx_dma from outside
 dma.c, make them static.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:52:32 -05:00
Nick Kossifidis
e8325ed874 ath5k: Check RXE when setting RXDP
* Make sure we are not trying to set RXDP while RX is active,
 for now ignore the return value.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30 13:52:32 -05:00