There's a new conflict with Linus's upstream tree, because
in the following merge conflict resolution in <asm/coco.h>:
38b334fc76 Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Linus has resolved the conflicting placement of 'cc_mask' better
than the original commit:
1c811d403a x86/sev: Fix position dependent variable references in startup code
... which was also done by an internal merge resolution:
2e5fc4786b Merge branch 'x86/sev' into x86/boot, to resolve conflicts and to pick up dependent tree
But Linus is right in 38b334fc76, the 'cc_mask' declaration is sufficient
within the #ifdef CONFIG_ARCH_HAS_CC_PLATFORM block.
So instead of forcing Linus to do the same resolution again, merge in Linus's
tree and follow his conflict resolution.
Conflicts:
arch/x86/include/asm/coco.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for implementing rigorous build time checks to enforce
that only code that can support it will be called from the early 1:1
mapping of memory, move SEV init code that is called in this manner to
the .head.text section.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240227151907.387873-19-ardb+git@google.com
It is, and will be even more useful in the future, to dump the SEV
features enabled according to SEV_STATUS. Do so:
[ 0.542753] Memory Encryption Features active: AMD SEV SEV-ES SEV-SNP
[ 0.544425] SEV: Status: SEV SEV-ES SEV-SNP DebugSwap
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Link: https://lore.kernel.org/r/20240219094216.GAZdMieDHKiI8aaP3n@fat_crate.local
The early startup code executes from a 1:1 mapping of memory, which
differs from the mapping that the code was linked and/or relocated to
run at. The latter mapping is not active yet at this point, and so
symbol references that rely on it will fault.
Given that the core kernel is built without -fPIC, symbol references are
typically emitted as absolute, and so any such references occuring in
the early startup code will therefore crash the kernel.
While an attempt was made to work around this for the early SEV/SME
startup code, by forcing RIP-relative addressing for certain global
SEV/SME variables via inline assembly (see snp_cpuid_get_table() for
example), RIP-relative addressing must be pervasively enforced for
SEV/SME global variables when accessed prior to page table fixups.
__startup_64() already handles this issue for select non-SEV/SME global
variables using fixup_pointer(), which adjusts the pointer relative to a
`physaddr` argument. To avoid having to pass around this `physaddr`
argument across all functions needing to apply pointer fixups, introduce
a macro RIP_RELATIVE_REF() which generates a RIP-relative reference to
a given global variable. It is used where necessary to force
RIP-relative accesses to global variables.
For backporting purposes, this patch makes no attempt at cleaning up
other occurrences of this pattern, involving either inline asm or
fixup_pointer(). Those will be addressed later.
[ bp: Call it "rip_rel_ref" everywhere like other code shortens
"rIP-relative reference" and make the asm wrapper __always_inline. ]
Co-developed-by: Kevin Loughlin <kevinloughlin@google.com>
Signed-off-by: Kevin Loughlin <kevinloughlin@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/all/20240130220845.1978329-1-kevinloughlin@google.com
Add a kdump safe version of sev_firmware_shutdown() and register it as a
crash_kexec_post_notifier so it will be invoked during panic/crash to do
SEV/SNP shutdown. This is required for transitioning all IOMMU pages to
reclaim/hypervisor state, otherwise re-init of IOMMU pages during
crashdump kernel boot fails and panics the crashdump kernel.
This panic notifier runs in atomic context, hence it ensures not to
acquire any locks/mutexes and polls for PSP command completion instead
of depending on PSP command completion interrupt.
[ mdr: Remove use of "we" in comments. ]
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-21-michael.roth@amd.com
Compare the opcode bytes at rIP for each #VC exit reason to verify the
instruction which raised the #VC exception is actually the right one.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240105101407.11694-1-bp@alien8.de
A write-access violation page fault kernel crash was observed while running
cpuhotplug LTP testcases on SEV-ES enabled systems. The crash was
observed during hotplug, after the CPU was offlined and the process
was migrated to different CPU. setup_ghcb() is called again which
tries to update ghcb_version in sev_es_negotiate_protocol(). Ideally this
is a read_only variable which is initialised during booting.
Trying to write it results in a pagefault:
BUG: unable to handle page fault for address: ffffffffba556e70
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
[ ...]
Call Trace:
<TASK>
? __die_body.cold+0x1a/0x1f
? __die+0x2a/0x35
? page_fault_oops+0x10c/0x270
? setup_ghcb+0x71/0x100
? __x86_return_thunk+0x5/0x6
? search_exception_tables+0x60/0x70
? __x86_return_thunk+0x5/0x6
? fixup_exception+0x27/0x320
? kernelmode_fixup_or_oops+0xa2/0x120
? __bad_area_nosemaphore+0x16a/0x1b0
? kernel_exc_vmm_communication+0x60/0xb0
? bad_area_nosemaphore+0x16/0x20
? do_kern_addr_fault+0x7a/0x90
? exc_page_fault+0xbd/0x160
? asm_exc_page_fault+0x27/0x30
? setup_ghcb+0x71/0x100
? setup_ghcb+0xe/0x100
cpu_init_exception_handling+0x1b9/0x1f0
The fix is to call sev_es_negotiate_protocol() only in the BSP boot phase,
and it only needs to be done once in any case.
[ mingo: Refined the changelog. ]
Fixes: 95d33bfaa3 ("x86/sev: Register GHCB memory when SEV-SNP is active")
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Bo Gan <bo.gan@broadcom.com>
Signed-off-by: Ashwin Dayanand Kamat <ashwin.kamat@broadcom.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/1701254429-18250-1-git-send-email-kashwindayan@vmware.com
- Limit the hardcoded topology quirk for Hygon CPUs to those which have a
model ID less than 4. The newer models have the topology CPUID leaf 0xB
correctly implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By chance
a XEN/PV boot ends up with smp_num_siblings == 2, which makes the
hotplug control stay at its default value "enabled". So the mask is
never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core to
deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or even
non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned long
or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die
IDs. That's really not the right place simply because cpuinfo is
subject to be reinitialized when a CPU goes through an offline/online
cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmU+yX0THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoROUD/4vlvKEcpm9rbI5DzLcaq4DFHKbyEZF
cQtzuOSM/9vTc9DHnuoNNLl9TWSYxiVYnejf3E21evfsqspYlzbTH8bId9XBCUid
6B68AJW842M2erNuwj0b0HwF1z++zpDmBDyhGOty/KQhoM8pYOHMvntAmbzJbuso
Dgx6BLVFcboTy6RwlfRa0EE8f9W5V+JbmG/VBDpdyCInal7VrudoVFZmWQnPIft7
zwOJpAoehkp8OKq7geKDf79yWxu9a1sNPd62HtaVEvfHwehHqE6OaMLss1us+0vT
SJ/D6gmRQBOwcXaZL0wL1dG7Km9Et4AisOvzhXGvTa5b2D5oljVoqJ7V7FTf5g3u
y3aqWbeUJzERUbeJt1HoGVAKyA4GtZOvg+TNIysf6F1Z4khl9alfa9jiqjj4g1au
zgItq/ZMBEBmJ7X4FxQUEUVBG2CDsEidyNBDRcimWQUDfBakV/iCs0suD8uu8ZOD
K5jMx8Hi2+xFx7r1YqsfsyMBYOf/zUZw65RbNe+kI992JbJ9nhcODbnbo5MlAsyv
vcqlK5FwXgZ4YAC8dZHU/tyTiqAW7oaOSkqKwTP5gcyNEqsjQHV//q6v+uqtjfYn
1C4oUsRHT2vJiV9ktNJTA4GQHIYF4geGgpG8Ih2SjXsSzdGtUd3DtX1iq0YiLEOk
eHhYsnniqsYB5g==
=xrz8
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
the guest kernel gets to emulate certain instructions in SEV-{ES,SNP}
guests by:
- disabling emulation of MMIO instructions when coming from user mode
- checking the IO permission bitmap before emulating IO instructions and
verifying the memory operands of INS/OUTS insns.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmUufCwACgkQEsHwGGHe
VUoTHA//YO81VH8JkvfKwxh322mbD+TDTkgWgcpClsWnkIZQdyCpKVTwsWWuhwX5
FmCEc3I75hRK3ts3sdhZYOS94gKVUyWf2ERm2qMD02+08tS3K/TxJyx5xBMz9U03
VOiWRC1rp33MZ0eCrXenTbA7Xay6AhU34pz4qSdEvkUKUU6YIdCfnspFXSi84Uqy
tgmyPDJhSH/3hE46EJSHd4m6c8PO3Su/oUJHMy/refbxAscf9NNdWpGlPY285Aox
RTA0mOYQRRKf0YFkGabLY9IIcL0w+NXMhMVEMFNiXyxFvaM8CONhK6SDmzvcUngB
gOfsN6nD4JDqfH11gXCdxS3n0IZuAAMHyEigktvp1qnyNEDTBUtbfUkyqvITg+JC
u3KMFSSYB58colTK/bkhE0IHnH2bKzhkDuVKzmJn/OCTxf0xxfGsnjbdw0JxMO81
/9ORx8/QKWzv411AH2DUNh4vIJqDxVTJJb8zkScnYStX2ust6Ra+jYIr+mmf46md
+Rzo5qoe/GnAtReCdGFg3w339nEbUz51n5uqm9KN4QnH39wg5R8nPiAUMHOlO1Zm
PNvNgSZUkiiJpMci/KBbyFzPJTO7YjjRql7GWRwhWrclSPOrq49kocK5eIEYS4ol
cd5cKF92hHsnwycz2dZsDQwYqEQ5J+c6kZTwfUwJcoUBxCWP/qI=
=MNCv
-----END PGP SIGNATURE-----
Merge tag 'sev_fixes_for_v6.6' of //git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Take care of a race between when the #VC exception is raised and when
the guest kernel gets to emulate certain instructions in SEV-{ES,SNP}
guests by:
- disabling emulation of MMIO instructions when coming from user mode
- checking the IO permission bitmap before emulating IO instructions
and verifying the memory operands of INS/OUTS insns"
* tag 'sev_fixes_for_v6.6' of //git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Check for user-space IOIO pointing to kernel space
x86/sev: Check IOBM for IOIO exceptions from user-space
x86/sev: Disable MMIO emulation from user mode
APIC IDs are used with random data types u16, u32, int, unsigned int,
unsigned long.
Make it all consistently use u32 because that reflects the hardware
register width.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085113.233274223@linutronix.de
Check the IO permission bitmap (if present) before emulating IOIO #VC
exceptions for user-space. These permissions are checked by hardware
already before the #VC is raised, but due to the VC-handler decoding
race it needs to be checked again in software.
Fixes: 25189d08e5 ("x86/sev-es: Add support for handling IOIO exceptions")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Dohrmann <erbse.13@gmx.de>
Cc: <stable@kernel.org>
A virt scenario can be constructed where MMIO memory can be user memory.
When that happens, a race condition opens between when the hardware
raises the #VC and when the #VC handler gets to emulate the instruction.
If the MOVS is replaced with a MOVS accessing kernel memory in that
small race window, then write to kernel memory happens as the access
checks are not done at emulation time.
Disable MMIO emulation in user mode temporarily until a sensible use
case appears and justifies properly handling the race window.
Fixes: 0118b604c2 ("x86/sev-es: Handle MMIO String Instructions")
Reported-by: Tom Dohrmann <erbse.13@gmx.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Dohrmann <erbse.13@gmx.de>
Cc: <stable@kernel.org>
In snp_accept_memory(), the npages variables value is calculated from
phys_addr_t variables but is an unsigned int. A very large range passed
into snp_accept_memory() could lead to truncating npages to zero. This
doesn't happen at the moment but let's be prepared.
Fixes: 6c32117963 ("x86/sev: Add SNP-specific unaccepted memory support")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/6d511c25576494f682063c9fb6c705b526a3757e.1687441505.git.thomas.lendacky@amd.com
coalescing lots of silly duplicates.
* Use static_calls() instead of indirect calls for apic->foo()
* Tons of cleanups an crap removal along the way
-----BEGIN PGP SIGNATURE-----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=eoKm
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Dave Hansen:
"This includes a very thorough rework of the 'struct apic' handlers.
Quite a variety of them popped up over the years, especially in the
32-bit days when odd apics were much more in vogue.
The end result speaks for itself, which is a removal of a ton of code
and static calls to replace indirect calls.
If there's any breakage here, it's likely to be around the 32-bit
museum pieces that get light to no testing these days.
Summary:
- Rework apic callbacks, getting rid of unnecessary ones and
coalescing lots of silly duplicates.
- Use static_calls() instead of indirect calls for apic->foo()
- Tons of cleanups an crap removal along the way"
* tag 'x86_apic_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/apic: Turn on static calls
x86/apic: Provide static call infrastructure for APIC callbacks
x86/apic: Wrap IPI calls into helper functions
x86/apic: Mark all hotpath APIC callback wrappers __always_inline
x86/xen/apic: Mark apic __ro_after_init
x86/apic: Convert other overrides to apic_update_callback()
x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb()
x86/apic: Provide apic_update_callback()
x86/xen/apic: Use standard apic driver mechanism for Xen PV
x86/apic: Provide common init infrastructure
x86/apic: Wrap apic->native_eoi() into a helper
x86/apic: Nuke ack_APIC_irq()
x86/apic: Remove pointless arguments from [native_]eoi_write()
x86/apic/noop: Tidy up the code
x86/apic: Remove pointless NULL initializations
x86/apic: Sanitize APIC ID range validation
x86/apic: Prepare x2APIC for using apic::max_apic_id
x86/apic: Simplify X2APIC ID validation
x86/apic: Add max_apic_id member
x86/apic: Wrap APIC ID validation into an inline
...
With MSR_AMD64_SEV_DEBUG_SWAP enabled, the guest is not expected to
receive a #VC for reads or writes of DR7.
Update the SNP_FEATURES_PRESENT mask with MSR_AMD64_SNP_DEBUG_SWAP so
an SNP guest doesn't gracefully terminate during SNP feature negotiation
if MSR_AMD64_SEV_DEBUG_SWAP is enabled.
Since a guest is not expected to receive a #VC on DR7 accesses when
MSR_AMD64_SEV_DEBUG_SWAP is enabled, return an error from the #VC
handler in this situation.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20230816022122.981998-1-aik@amd.com
Convert all places which just assign a new function directly to the apic
callback to use apic_update_callback() which prepares for using static
calls.
Mark snp_set_wakeup_secondary_cpu() and kvm_setup_pv_ipi() __init, as they
are only invoked from init code and otherwise trigger a section mismatch as
they are now invoking a __init function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
the usage patterns are becoming apparent
-----BEGIN PGP SIGNATURE-----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=Aj6p
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Some SEV and CC platform helpers cleanup and simplifications now that
the usage patterns are becoming apparent
[ I'm sure I'm the only one that has gets confused by all the TLAs, but
in case there are others: here SEV is AMD's "Secure Encrypted
Virtualization" and CC is generic "Confidential Computing".
There's also Intel SGX (Software Guard Extensions) and TDX (Trust
Domain Extensions), along with all the vendor memory encryption
extensions (SME, TSME, TME, and WTF).
And then we have arm64 with RMA and CCA, and I probably forgot another
dozen or so related acronyms - Linus ]
* tag 'x86_sev_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/coco: Get rid of accessor functions
x86/sev: Get rid of special sev_es_enable_key
x86/coco: Mark cc_platform_has() and descendants noinstr
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using it
and thus preventing a whole set of attacks against such guests like
memory replay and the like.
There are a couple of strategies of how memory should be accepted
- the current implementation does an on-demand way of accepting.
-----BEGIN PGP SIGNATURE-----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=FS95
-----END PGP SIGNATURE-----
Merge tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 confidential computing update from Borislav Petkov:
- Add support for unaccepted memory as specified in the UEFI spec v2.9.
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using
it and thus preventing a whole set of attacks against such guests
like memory replay and the like.
There are a couple of strategies of how memory should be accepted -
the current implementation does an on-demand way of accepting.
* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sevguest: Add CONFIG_CRYPTO dependency
x86/efi: Safely enable unaccepted memory in UEFI
x86/sev: Add SNP-specific unaccepted memory support
x86/sev: Use large PSC requests if applicable
x86/sev: Allow for use of the early boot GHCB for PSC requests
x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
x86/sev: Fix calculation of end address based on number of pages
x86/tdx: Add unaccepted memory support
x86/tdx: Refactor try_accept_one()
x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
efi: Add unaccepted memory support
x86/boot/compressed: Handle unaccepted memory
efi/libstub: Implement support for unaccepted memory
efi/x86: Get full memory map in allocate_e820()
mm: Add support for unaccepted memory
Add SNP-specific hooks to the unaccepted memory support in the boot
path (__accept_memory()) and the core kernel (accept_memory()) in order
to support booting SNP guests when unaccepted memory is present. Without
this support, SNP guests will fail to boot and/or panic() when unaccepted
memory is present in the EFI memory map.
The process of accepting memory under SNP involves invoking the hypervisor
to perform a page state change for the page to private memory and then
issuing a PVALIDATE instruction to accept the page.
Since the boot path and the core kernel paths perform similar operations,
move the pvalidate_pages() and vmgexit_psc() functions into sev-shared.c
to avoid code duplication.
Create the new header file arch/x86/boot/compressed/sev.h because adding
the function declaration to any of the existing SEV related header files
pulls in too many other header files, causing the build to fail.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/a52fa69f460fd1876d70074b20ad68210dfc31dd.1686063086.git.thomas.lendacky@amd.com
In advance of providing support for unaccepted memory, request 2M Page
State Change (PSC) requests when the address range allows for it. By using
a 2M page size, more PSC operations can be handled in a single request to
the hypervisor. The hypervisor will determine if it can accommodate the
larger request by checking the mapping in the nested page table. If mapped
as a large page, then the 2M page request can be performed, otherwise the
2M page request will be broken down into 512 4K page requests. This is
still more efficient than having the guest perform multiple PSC requests
in order to process the 512 4K pages.
In conjunction with the 2M PSC requests, attempt to perform the associated
PVALIDATE instruction of the page using the 2M page size. If PVALIDATE
fails with a size mismatch, then fallback to validating 512 4K pages. To
do this, page validation is modified to work with the PSC structure and
not just a virtual address range.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/050d17b460dfc237b51d72082e5df4498d3513cb.1686063086.git.thomas.lendacky@amd.com
Using a GHCB for a page stage change (as opposed to the MSR protocol)
allows for multiple pages to be processed in a single request. In prep
for early PSC requests in support of unaccepted memory, update the
invocation of vmgexit_psc() to be able to use the early boot GHCB and not
just the per-CPU GHCB structure.
In order to use the proper GHCB (early boot vs per-CPU), set a flag that
indicates when the per-CPU GHCBs are available and registered. For APs,
the per-CPU GHCBs are created before they are started and registered upon
startup, so this flag can be used globally for the BSP and APs instead of
creating a per-CPU flag. This will allow for a significant reduction in
the number of MSR protocol page state change requests when accepting
memory.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/d6cbb21f87f81eb8282dd3bf6c34d9698c8a4bbc.1686063086.git.thomas.lendacky@amd.com
In advance of providing support for unaccepted memory, switch from using
kmalloc() for allocating the Page State Change (PSC) structure to using a
local variable that lives on the stack. This is needed to avoid a possible
recursive call into set_pages_state() if the kmalloc() call requires
(more) memory to be accepted, which would result in a hang.
The current size of the PSC struct is 2,032 bytes. To make the struct more
stack friendly, reduce the number of PSC entries from 253 down to 64,
resulting in a size of 520 bytes. This is a nice compromise on struct size
and total PSC requests while still allowing parallel PSC operations across
vCPUs.
If the reduction in PSC entries results in any kind of performance issue
(that is not seen at the moment), use of a larger static PSC struct, with
fallback to the smaller stack version, can be investigated.
For more background info on this decision, see the subthread in the Link:
tag below.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/lkml/658c455c40e8950cb046dd885dd19dc1c52d060a.1659103274.git.thomas.lendacky@amd.com
When calculating an end address based on an unsigned int number of pages,
any value greater than or equal to 0x100000 that is shift PAGE_SHIFT bits
results in a 0 value, resulting in an invalid end address. Change the
number of pages variable in various routines from an unsigned int to an
unsigned long to calculate the end address correctly.
Fixes: 5e5ccff60a ("x86/sev: Add helper for validating pages in early enc attribute changes")
Fixes: dc3f3d2474 ("x86/mm: Validate memory when changing the C-bit")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/6a6e4eea0e1414402bac747744984fa4e9c01bb6.1686063086.git.thomas.lendacky@amd.com
This is used in the SEV play_dead() implementation to re-online CPUs. But
that has nothing to do with CPU0.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205255.662319599@linutronix.de
A SEV-ES guest is active on AMD when CC_ATTR_GUEST_STATE_ENCRYPT is set.
I.e., MSR_AMD64_SEV, bit 1, SEV_ES_Enabled. So no need for a special
static key.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230328201712.25852-3-bp@alien8.de
The GHCB specification declares that the firmware error value for
a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The
upper 32 bits are for the VMM's own error code. The fw_err argument to
snp_guest_issue_request() is thus a misnomer, and callers will need
access to all 64 bits.
The type of unsigned long also causes problems, since sw_exit_info2 is
u64 (unsigned long long) vs the argument's unsigned long*. Change this
type for issuing the guest request. Pass the ioctl command struct's error
field directly instead of in a local variable, since an incomplete guest
request may not set the error code, and uninitialized stack memory would
be written back to user space.
The firmware might not even be called, so bookend the call with the no
firmware call error and clear the error.
Since the "fw_err" field is really exitinfo2 split into the upper bits'
vmm error code and lower bits' firmware error code, convert the 64 bit
value to a union.
[ bp:
- Massage commit message
- adjust code
- Fix a build issue as
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303070609.vX6wp2Af-lkp@intel.com
- print exitinfo2 in hex
Tom:
- Correct -EIO exit case. ]
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-5-dionnaglaze@google.com
Link: https://lore.kernel.org/r/20230307192449.24732-12-bp@alien8.de
A potentially malicious SEV guest can constantly hammer the hypervisor
using this driver to send down requests and thus prevent or at least
considerably hinder other guests from issuing requests to the secure
processor which is a shared platform resource.
Therefore, the host is permitted and encouraged to throttle such guest
requests.
Add the capability to handle the case when the hypervisor throttles
excessive numbers of requests issued by the guest. Otherwise, the VM
platform communication key will be disabled, preventing the guest from
attesting itself.
Realistically speaking, a well-behaved guest should not even care about
throttling. During its lifetime, it would end up issuing a handful of
requests which the hardware can easily handle.
This is more to address the case of a malicious guest. Such guest should
get throttled and if its VMPCK gets disabled, then that's its own
wrongdoing and perhaps that guest even deserves it.
To the implementation: the hypervisor signals with SNP_GUEST_REQ_ERR_BUSY
that the guest requests should be throttled. That error code is returned
in the upper 32-bit half of exitinfo2 and this is part of the GHCB spec
v2.
So the guest is given a throttling period of 1 minute in which it
retries the request every 2 seconds. This is a good default but if it
turns out to not pan out in practice, it can be tweaked later.
For safety, since the encryption algorithm in GHCBv2 is AES_GCM, control
must remain in the kernel to complete the request with the current
sequence number. Returning without finishing the request allows the
guest to make another request but with different message contents. This
is IV reuse, and breaks cryptographic protections.
[ bp:
- Rewrite commit message and do a simplified version.
- The stable tags are supposed to denote that a cleanup should go
upfront before backporting this so that any future fixes to this
can preserve the sanity of the backporter(s). ]
Fixes: d5af44dde5 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org> # d6fd48eff7 ("virt/coco/sev-guest: Check SEV_SNP attribute at probe time")
Cc: <stable@kernel.org> # 970ab82374 (" virt/coco/sev-guest: Simplify extended guest request handling")
Cc: <stable@kernel.org> # c5a338274b ("virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()")
Cc: <stable@kernel.org> # 0fdb6cc7c8 ("virt/coco/sev-guest: Carve out the request issuing logic into a helper")
Cc: <stable@kernel.org> # d25bae7dc7 ("virt/coco/sev-guest: Do some code style cleanups")
Cc: <stable@kernel.org> # fa4ae42cc6 ("virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case")
Link: https://lore.kernel.org/r/20230214164638.1189804-2-dionnaglaze@google.com
snp_issue_guest_request() checks the value returned by the hypervisor in
sw_exit_info_2 and returns a different error depending on it.
Convert those checks into a switch-case to make it more readable when
more error values are going to be checked in the future.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-8-bp@alien8.de
Return a specific error code - -ENOSPC - to signal the too small cert
data buffer instead of checking exit code and exitinfo2.
While at it, hoist the *fw_err assignment in snp_issue_guest_request()
so that a proper error value is returned to the callers.
[ Tom: check override_err instead of err. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-4-bp@alien8.de
No need to check it on every ioctl. And yes, this is a common SEV driver
but it does only SNP-specific operations currently. This can be
revisited later, when more use cases appear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-3-bp@alien8.de
Both <linux/mmiotrace.h> and <asm/insn-eval.h> define various MMIO_ enum constants,
whose namespace overlaps.
Rename the <asm/insn-eval.h> ones to have a INSN_ prefix, so that the headers can be
used from the same source file.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230101162910.710293-2-Jason@zx2c4.com
Mark both the function prototype and definition as noreturn in order to
prevent the compiler from doing transformations which confuse objtool
like so:
vmlinux.o: warning: objtool: sme_enable+0x71: unreachable instruction
This triggers with gcc-12.
Add it and sev_es_terminate() to the objtool noreturn tracking array
too. Sort it while at it.
Suggested-by: Michael Matz <matz@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220824152420.20547-1-bp@alien8.de
When running identity-mapped and depending on the kernel configuration,
it is possible that the compiler uses jump tables when generating code
for cc_platform_has().
This causes a boot failure because the jump table uses un-mapped kernel
virtual addresses, not identity-mapped addresses. This has been seen
with CONFIG_RETPOLINE=n.
Similar to sme_encrypt_kernel(), use an open-coded direct check for the
status of SNP rather than trying to eliminate the jump table. This
preserves any code optimization in cc_platform_has() that can be useful
post boot. It also limits the changes to SEV-specific files so that
future compiler features won't necessarily require possible build changes
just because they are not compatible with running identity-mapped.
[ bp: Massage commit message. ]
Fixes: 5e5ccff60a ("x86/sev: Add helper for validating pages in early enc attribute changes")
Reported-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 5.19.x
Link: https://lore.kernel.org/all/YqfabnTRxFSM+LoX@google.com/
This reverts commit 007faec014.
Now that hyperv does its own protocol negotiation:
49d6a3c062 ("x86/Hyper-V: Add SEV negotiate protocol support in Isolation VM")
revert this exposure of the sev_es_ghcb_hv_call() helper.
Cc: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by：Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/20220614014553.1915929-1-ltykernel@gmail.com
The GHCB specification section 2.7 states that when SEV-SNP is enabled,
a guest should not rely on the hypervisor to provide the address of the
AP jump table. Instead, if a guest BIOS wants to provide an AP jump
table, it should record the address in the SNP secrets page so the guest
operating system can obtain it directly from there.
Fix this on the guest kernel side by having SNP guests use the AP jump
table address published in the secrets page rather than issuing a GHCB
request to get it.
[ mroth:
- Improve error handling when ioremap()/memremap() return NULL
- Don't mix function calls with declarations
- Add missing __init
- Tweak commit message ]
Fixes: 0afb6b660a ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220422135624.114172-3-michael.roth@amd.com
Currently, get_secrets_page() is only reachable from the following call
chain:
__init snp_init_platform_device():
get_secrets_page()
so mark it as __init as well. This is also needed since it calls
early_memremap(), which is also an __init routine.
Similarly, get_jump_table_addr() is only reachable from the following
call chain:
__init setup_real_mode():
sme_sev_setup_real_mode():
sev_es_setup_ap_jump_table():
get_jump_table_addr()
so mark get_jump_table_addr() and everything up that call chain as
__init as well. This is also needed since future patches will add a
call to get_secrets_page(), which needs to be __init due to the reasons
stated above.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220422135624.114172-2-michael.roth@amd.com
During patch review, it was decided the SNP guest driver name should not
be SEV-SNP specific, but should be generic for use with anything SEV.
However, this feedback was missed and the driver name, and many of the
driver functions and structures, are SEV-SNP name specific. Rename the
driver to "sev-guest" (to match the misc device that is created) and
update some of the function and structure names, too.
While in the file, adjust the one pr_err() message to be a dev_err()
message so that the message, if issued, uses the driver name.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/307710bb5515c9088a19fd0b930268c7300479b2.1650464054.git.thomas.lendacky@amd.com
Replace the halt loop in handle_vc_boot_ghcb() with an
sev_es_terminate(). The HLT gives the system no indication the guest is
unhappy. The termination request will signal there was an error during
VC handling during boot.
[ bp: Update it to pass the reason set too. ]
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220317211913.1397427-1-pgonda@google.com
Version 2 of the GHCB specification provides a Non Automatic Exit (NAE)
event type that can be used by the SEV-SNP guest to communicate with the
PSP without risk from a malicious hypervisor who wishes to read, alter,
drop or replay the messages sent.
SNP_LAUNCH_UPDATE can insert two special pages into the guest’s memory:
the secrets page and the CPUID page. The PSP firmware populates the
contents of the secrets page. The secrets page contains encryption keys
used by the guest to interact with the firmware. Because the secrets
page is encrypted with the guest’s memory encryption key, the hypervisor
cannot read the keys. See SEV-SNP firmware spec for further details on
the secrets page format.
Create a platform device that the SEV-SNP guest driver can bind to get
the platform resources such as encryption key and message id to use to
communicate with the PSP. The SEV-SNP guest driver provides a userspace
interface to get the attestation report, key derivation, extended
attestation report etc.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-43-brijesh.singh@amd.com
Version 2 of GHCB specification provides SNP_GUEST_REQUEST and
SNP_EXT_GUEST_REQUEST NAE that can be used by the SNP guest to
communicate with the PSP.
While at it, add a snp_issue_guest_request() helper that will be used by
driver or other subsystem to issue the request to PSP.
See SEV-SNP firmware and GHCB spec for more details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-42-brijesh.singh@amd.com
For debugging purposes it is very useful to have a way to see the full
contents of the SNP CPUID table provided to a guest. Add an sev=debug
kernel command-line option to do so.
Also introduce some infrastructure so that additional options can be
specified via sev=option1[,option2] over time in a consistent manner.
[ bp: Massage, simplify string parsing. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-41-brijesh.singh@amd.com
SEV-SNP guests will be provided the location of special 'secrets' and
'CPUID' pages via the Confidential Computing blob. This blob is
provided to the run-time kernel either through a boot_params field that
was initialized by the boot/compressed kernel, or via a setup_data
structure as defined by the Linux Boot Protocol.
Locate the Confidential Computing blob from these sources and, if found,
use the provided CPUID page/table address to create a copy that the
run-time kernel will use when servicing CPUID instructions via a #VC
handler.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-40-brijesh.singh@amd.com
Initial/preliminary detection of SEV-SNP is done via the Confidential
Computing blob. Check for it prior to the normal SEV/SME feature
initialization, and add some sanity checks to confirm it agrees with
SEV-SNP CPUID/MSR bits.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-39-brijesh.singh@amd.com
This code will also be used later for SEV-SNP-validated CPUID code in
some cases, so move it to a common helper.
While here, also add a check to terminate in cases where the CPUID
function/subfunction is indexed and the subfunction is non-zero, since
the GHCB MSR protocol does not support non-zero subfunctions.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-32-brijesh.singh@amd.com
To provide a more secure way to start APs under SEV-SNP, use the SEV-SNP
AP Creation NAE event. This allows for guest control over the AP register
state rather than trusting the hypervisor with the SEV-ES Jump Table
address.
During native_smp_prepare_cpus(), invoke an SEV-SNP function that, if
SEV-SNP is active, will set/override apic->wakeup_secondary_cpu. This
will allow the SEV-SNP AP Creation NAE event method to be used to boot
the APs. As a result of installing the override when SEV-SNP is active,
this method of starting the APs becomes the required method. The override
function will fail to start the AP if the hypervisor does not have
support for AP creation.
[ bp: Work in forgotten review comments. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-23-brijesh.singh@amd.com
Add the needed functionality to change pages state from shared
to private and vice-versa using the Page State Change VMGEXIT as
documented in the GHCB spec.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-22-brijesh.singh@amd.com
early_set_memory_{encrypted,decrypted}() are used for changing the page
state from decrypted (shared) to encrypted (private) and vice versa.
When SEV-SNP is active, the page state transition needs to go through
additional steps.
If the page is transitioned from shared to private, then perform the
following after the encryption attribute is set in the page table:
1. Issue the page state change VMGEXIT to add the page as a private
in the RMP table.
2. Validate the page after its successfully added in the RMP table.
To maintain the security guarantees, if the page is transitioned from
private to shared, then perform the following before clearing the
encryption attribute from the page table.
1. Invalidate the page.
2. Issue the page state change VMGEXIT to make the page shared in the
RMP table.
early_set_memory_{encrypted,decrypted}() can be called before the GHCB
is setup so use the SNP page state MSR protocol VMGEXIT defined in the
GHCB specification to request the page state change in the RMP table.
While at it, add a helper snp_prep_memory() which will be used in
probe_roms(), in a later patch.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-19-brijesh.singh@amd.com
The SEV-SNP guest is required by the GHCB spec to register the GHCB's
Guest Physical Address (GPA). This is because the hypervisor may prefer
that a guest uses a consistent and/or specific GPA for the GHCB associated
with a vCPU. For more information, see the GHCB specification section
"GHCB GPA Registration".
[ bp: Cleanup comments. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-18-brijesh.singh@amd.com
Version 2 of the GHCB specification added the advertisement of features
that are supported by the hypervisor. If the hypervisor supports SEV-SNP
then it must set the SEV-SNP features bit to indicate that the base
functionality is supported.
Check that feature bit while establishing the GHCB; if failed, terminate
the guest.
Version 2 of the GHCB specification adds several new Non-Automatic Exits
(NAEs), most of them are optional except the hypervisor feature. Now
that the hypervisor feature NAE is implemented, bump the GHCB maximum
supported protocol version.
While at it, move the GHCB protocol negotiation check from the #VC
exception handler to sev_enable() so that all feature detection happens
before the first #VC exception.
While at it, document why the GHCB page cannot be setup from
load_stage2_idt().
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-13-brijesh.singh@amd.com
