commit 82d3ec1d89 ("ASoC: Use schema reference for sound-name-prefix")
added name-prefix.yaml schema and the same reference was used in couple
of other schemas. But this is causing following warning and the same is
fixed in current patch.
Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
audio-codec@34: 'sound-name-prefix' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
audio-codec@36: 'sound-name-prefix' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
Fixes: 82d3ec1d89 ("ASoC: Use schema reference for sound-name-prefix")
Reported-by: Rob Herring <robh+dt@kernel.org>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1632238860-16947-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Earlier as part of series [0], support for ADMAIF and I/O modules (such
as I2S, DMIC and DSPK) was added. This series aims at exposing some of
the AHUB internal modules (listed below), which can be used for audio
pre or post processing.
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
These modules can be plugged into audio paths and relevant processing
can be done. The MUX routes are extended to allow add or remove above
modules in the path via mixer controls. This is similar to how specific
ADMAIF channels are connected to relevant I/O module instances at the
moment.
Some of these modules can alter PCM parameters. Consider example of
resampler (44.1 -> 48 kHz) in the path.
aplay(44.1 kHz) -> ADMAIF -> SFC -> (48 kHz) I2S -> (48kHz) Codec
The modules following SFC should be using converted sample rate and DAIs
need to be configured accordingly. The audio-graph driver provides a
mechanism to fixup the new parameters which can be specified in DT for a
given DAI. Then core uses these new values via fixup callback and then
pass it to respective DAIs hw_param() callback. The "convert-rate",
described in [1], property can be used when there is rate conversion in
the audio path. Similarly "convert-channels" can be used when there is
channel conversion in the path. There is no "convert-xxx" property for
sample size conversions. It can be added if necessary.
[0] https://www.lkml.org/lkml/2020/7/21/1357
[1] Documentation/devicetree/bindings/sound/audio-graph-port.yaml
Changelog
=========
v1 -> v2
--------
* Put comments for soft reset application in the drivers.
* Split out mute/volume control logic in put() calls of MVC driver and
use separate callbacks for the respective kcontrols.
* Update kcontrol put() callback in MVC driver to return 1 whenever
there is change. Similar change is done in other drivers too.
* Use name-prefix.yaml reference for the driver documentation now.
* Add sound-name-prefix pattern for MIXER driver and use prefix
accordingly in DT.
Sameer Pujar (13):
ASoC: soc-pcm: Don't reconnect an already active BE
ASoC: simple-card-utils: Increase maximum DAI links limit to 512
ASoC: audio-graph: Fixup CPU endpoint hw_params in a BE<->BE link
ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules
ASoC: tegra: Add routes for few AHUB modules
ASoC: tegra: Add Tegra210 based MVC driver
ASoC: tegra: Add Tegra210 based SFC driver
ASoC: tegra: Add Tegra210 based AMX driver
ASoC: tegra: Add Tegra210 based ADX driver
ASoC: tegra: Add Tegra210 based Mixer driver
arm64: defconfig: Enable few Tegra210 based AHUB drivers
arm64: tegra: Add few AHUB devices for Tegra210 and later
arm64: tegra: Extend APE audio support on Jetson platforms
.../bindings/sound/nvidia,tegra210-adx.yaml | 76 +
.../bindings/sound/nvidia,tegra210-ahub.yaml | 20 +
.../bindings/sound/nvidia,tegra210-amx.yaml | 76 +
.../bindings/sound/nvidia,tegra210-mixer.yaml | 74 +
.../bindings/sound/nvidia,tegra210-mvc.yaml | 76 +
.../bindings/sound/nvidia,tegra210-sfc.yaml | 73 +
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 1554 ++++++++-
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 120 +
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 1493 +++++++-
.../arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 1520 ++++++++-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 116 +
arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 876 +++++
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 876 +++++
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 77 +
arch/arm64/configs/defconfig | 5 +
include/sound/simple_card_utils.h | 2 +-
sound/soc/generic/audio-graph-card.c | 4 +-
sound/soc/soc-pcm.c | 4 +
sound/soc/tegra/Kconfig | 48 +
sound/soc/tegra/Makefile | 10 +
sound/soc/tegra/tegra210_adx.c | 531 +++
sound/soc/tegra/tegra210_adx.h | 72 +
sound/soc/tegra/tegra210_ahub.c | 511 ++-
sound/soc/tegra/tegra210_amx.c | 600 ++++
sound/soc/tegra/tegra210_amx.h | 93 +
sound/soc/tegra/tegra210_mixer.c | 674 ++++
sound/soc/tegra/tegra210_mixer.h | 100 +
sound/soc/tegra/tegra210_mvc.c | 645 ++++
sound/soc/tegra/tegra210_mvc.h | 117 +
sound/soc/tegra/tegra210_sfc.c | 3549 ++++++++++++++++++++
sound/soc/tegra/tegra210_sfc.h | 78 +
31 files changed, 13647 insertions(+), 423 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
create mode 100644 sound/soc/tegra/tegra210_adx.c
create mode 100644 sound/soc/tegra/tegra210_adx.h
create mode 100644 sound/soc/tegra/tegra210_amx.c
create mode 100644 sound/soc/tegra/tegra210_amx.h
create mode 100644 sound/soc/tegra/tegra210_mixer.c
create mode 100644 sound/soc/tegra/tegra210_mixer.h
create mode 100644 sound/soc/tegra/tegra210_mvc.c
create mode 100644 sound/soc/tegra/tegra210_mvc.h
create mode 100644 sound/soc/tegra/tegra210_sfc.c
create mode 100644 sound/soc/tegra/tegra210_sfc.h
--
2.7.4
Correct several errors in rt5682s dtschema:
1. The examples should be under "examples":
'example' is not one of ['$id', '$schema', 'title', 'description', 'examples', ...
2. Missing type for vendor properties
3. clock-names should be an array:
properties:clock-names:items: {'const': 'mclk'} is not of type 'array'
4. Example DTS should include headers:
[scripts/Makefile.lib:386: Documentation/devicetree/bindings/sound/realtek,rt5682s.example.dt.yaml] Error 1
5. Node name in example DTS misses unit address and does not match DT
convention (generic name):
Warning (reg_format): /example-0/rt5682s:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
6. Node address should be in size-cells:0 block in example DTS:
Warning (reg_format): /example-0/codec@1a:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Fixes: 50159fdb14 ("ASoC: dt-bindings: rt5682s: add bindings for rt5682s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210920112106.140918-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds YAML schema for DT bindings of few AHUB modules.
These devices will be registered as ASoC components and bindings
will be used on Tegra210 and later chips. The bindings for below
mentioned modules are added:
* SFC (Sampling Frequency Converter)
* MVC (Master Volume Control)
* AMX (Audio Multiplexer)
* ADX (Audio Demultiplexer)
* Mixer
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1631551342-25469-5-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix warnings and errors in DT bindings
Add newline at end of file
Replace 'unevaluatedProperties' with 'additionalProperties'
Add spi context to DT example
Add #sound-dai-cells to DT example
Rename to 'cirrus,cs35l41.yaml'
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210915191422.2371623-1-drhodes@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following are the changes:
- Add json-schema for 'sound-name-prefix' documentation under
'name-perfix.yaml'
- Use schema references wherever needed.
- Remove txt based doc
Changelog
=========
v2 -> v3
--------
* Removed examples in patch 1/3 as suggested by Rob
* Added reviewed tag from Jerome for the series
* Added reviewed tag from Rob for patch 2/3
v1 -> v2
--------
* Provide top reference to name-prefix.yaml as suggested by Rob
for patch 2/3
* Dropped couple of unreachable email ids from Cc list in commit
message of patch 2/3
* No changes in remaining patches
Sameer Pujar (3):
ASoC: Add json-schema documentation for sound-name-prefix
ASoC: Use schema reference for sound-name-prefix
ASoC: Remove name-prefix.txt
.../devicetree/bindings/sound/name-prefix.txt | 24 ----------------------
.../devicetree/bindings/sound/name-prefix.yaml | 21 +++++++++++++++++++
.../bindings/sound/nvidia,tegra186-dspk.yaml | 9 +++-----
.../bindings/sound/nvidia,tegra210-dmic.yaml | 9 +++-----
.../bindings/sound/nvidia,tegra210-i2s.yaml | 9 +++-----
.../devicetree/bindings/sound/nxp,tfa989x.yaml | 9 +++-----
Documentation/devicetree/bindings/sound/rt5659.txt | 2 +-
.../bindings/sound/simple-audio-mux.yaml | 9 +++-----
8 files changed, 37 insertions(+), 55 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/name-prefix.txt
create mode 100644 Documentation/devicetree/bindings/sound/name-prefix.yaml
--
2.7.4
Simple audio amplifiers are supported by Linux with a matching device
tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: alsa-devel@alsa-project.org
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-5-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDIF Transmitter binding is used by Linux with a matching Device
Tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: alsa-devel@alsa-project.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-4-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
Bluetooth SCO Link are supported by Linux with a matching device tree
binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: alsa-devel@alsa-project.org
Cc: devicetree@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901091852.479202-3-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
Even though we had the wm8978 driver for some time and a number of
boards using it already, we never had a binding for it. Let's add it
based on what the driver expects and the boards are providing.
Cc: alsa-devel@alsa-project.org
Cc: devicetree@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: patches@opensource.cirrus.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210901091852.479202-2-maxime@cerno.tech
Signed-off-by: Mark Brown <broonie@kernel.org>
Since schema name-prefix.yaml is available and references are updated,
remove txt based doc.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1630686919-19495-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'sound-name-prefix' is used to prepend suitable strings to a
component widgets or controls. This is helpful when there are
multiple instances of the same component. Add relevant json-schema
and is inspired from sound-name-prefix.txt documentation.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1630686919-19495-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Devicetree binding documentation for CS35L41 driver
CS35L41 is a 11-V Boosted Mono Class D Amplifier with
DSP Speaker Protection and Equalization
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210907225719.2018115-3-drhodes@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
vduse driver supporting blk
virtio-vsock support for end of record with SEQPACKET
vdpa: mac and mq support for ifcvf and mlx5
vdpa: management netlink for ifcvf
virtio-i2c, gpio dt bindings
misc fixes, cleanups
NB: when merging this with
b542e383d8 ("eventfd: Make signal recursion protection a task bit")
from Linus' tree, replace eventfd_signal_count with
eventfd_signal_allowed, and drop the export of eventfd_wake_count from
("eventfd: Export eventfd_wake_count to modules").
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmE1+awPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpt6EIAJy0qrc62lktNA0IiIVJSLbUbTMmFj8MzkGR
8UxZdhpjWqBPJPyaOuNeksAqTGm/UAPEYx3C2c95Jhej7anFpy7dbCtIXcPHLJME
DjcJg+EDrlNCj8m0FcsHpHWsFzPMERJpyEZNxgB5WazQbv+yWhGrg2FN5DCnF0Ro
ZFYeKSVty148pQ0nHl8X0JM2XMtqit+O+LvKN2HQZ+fubh7BCzMxzkHY0QLHIzUS
UeZqd3Qm8YcbqnlX38P5D6k+NPiTEgknmxaBLkPxg6H3XxDAmaIRFb8Ldd1rsgy1
zTLGDiSGpVDIpawRnuEAzqJThV3Y5/MVJ1WD+mDYQ96tmhfp+KY=
=DBH/
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
- Disable fw_devlinks on x86 DT platforms to fix OLPC
- More replacing oneOf+const with enum on a few new schemas
- Drop unnecessary type references on Xilinx SPI binding schema
-----BEGIN PGP SIGNATURE-----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=a8nQ
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable fw_devlinks on x86 DT platforms to fix OLPC
- More replacing oneOf+const with enum on a few new schemas
- Drop unnecessary type references on Xilinx SPI binding schema
* tag 'devicetree-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
spi: dt-bindings: xilinx: Drop type reference on *-bits properties
dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries
of: property: Disable fw_devlink DT support for X86
Subsystem:
- Switch to Neri and Schneider time conversion algorithm
Drivers:
- rx8025: add rx8035 support
- s5m: modernize driver and set range
-----BEGIN PGP SIGNATURE-----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=480a
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The broken down time conversion is similar to what is done in the time
subsystem since v5.14. The rest is fairly straightforward.
Subsystem:
- Switch to Neri and Schneider time conversion algorithm
Drivers:
- rx8025: add rx8035 support
- s5m: modernize driver and set range"
* tag 'rtc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rx8010: select REGMAP_I2C
dt-bindings: rtc: add Epson RX-8025 and RX-8035
rtc: rx8025: implement RX-8035 support
rtc: cmos: remove stale REVISIT comments
rtc: tps65910: Correct driver module alias
rtc: move RTC_LIB_KUNIT_TEST to proper location
rtc: lib_test: add MODULE_LICENSE
rtc: Improve performance of rtc_time64_to_tm(). Add tests.
rtc: s5m: set range
rtc: s5m: enable wakeup only when available
rtc: s5m: signal the core when alarm are not available
rtc: s5m: switch to devm_rtc_allocate_device
The changes this time around are mostly janitorial in nature. A lot of
this is simplifications of drivers using device-managed functions and
improving compilation coverage.
The Mediatek display PWM driver now supports the atomic API.
Cleanups and minor fixes make up the remainder of this set.
-----BEGIN PGP SIGNATURE-----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=yTrZ
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The changes this time around are mostly janitorial in nature. A lot of
this is simplifications of drivers using device-managed functions and
improving compilation coverage.
The Mediatek display PWM driver now supports the atomic API.
Cleanups and minor fixes make up the remainder of this set"
* tag 'pwm/for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (54 commits)
pwm: mtk-disp: Implement atomic API .get_state()
pwm: mtk-disp: Fix overflow in period and duty calculation
pwm: mtk-disp: Implement atomic API .apply()
pwm: mtk-disp: Adjust the clocks to avoid them mismatch
dt-bindings: pwm: rockchip: Add description for rk3568
pwm: Make pwmchip_remove() return void
pwm: sun4i: Don't check the return code of pwmchip_remove()
pwm: sifive: Don't check the return code of pwmchip_remove()
pwm: samsung: Don't check the return code of pwmchip_remove()
pwm: renesas-tpu: Don't check the return code of pwmchip_remove()
pwm: rcar: Don't check the return code of pwmchip_remove()
pwm: pca9685: Don't check the return code of pwmchip_remove()
pwm: omap-dmtimer: Don't check the return code of pwmchip_remove()
pwm: mtk-disp: Don't check the return code of pwmchip_remove()
pwm: imx-tpm: Don't check the return code of pwmchip_remove()
pwm: img: Don't check the return code of pwmchip_remove()
pwm: cros-ec: Don't check the return code of pwmchip_remove()
pwm: brcmstb: Don't check the return code of pwmchip_remove()
pwm: atmel-tcb: Don't check the return code of pwmchip_remove()
pwm: atmel-hlcdc: Don't check the return code of pwmchip_remove()
...
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal
driver and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on
the QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmE7yAcACgkQqDIjiipP
6E8WKwgAmI+kdOURCz1CtCIv6FnQFx20suxZidfATPULBPZ8zcHqdjxJECXJpvDz
y8T8dGAPRqXmMBJm2vF/qVraHaDJvscHXaflhsurhyEp0tiGptNeugBosso0jDEQ
JFrQ6Rny/NCmNMOkWW4YlSfkik0zQ43xlHocy3UfOKfcshhYWGsPTbIXdA6wH/zh
3tFW8j327tkyenrKZiaioJOSX88Oyy7Ft8l5k0HP+hPYkrvihWDJuEfEEmpfkdA7
Q70Lacf2QtFP8mUfGKpQxURSgndjphDPU7tzP5NqqWvLuT94aTspvJx4ywVwK8Iv
o+jNvR33yBIs5FXXB7B1ymkNE1h8uQ==
=blIQ
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add the tegra3 thermal sensor and fix the compilation testing on
tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST
(Dmitry Osipenko)
- Fix the error code for the exynos when devm_get_clk() fails (Dan
Carpenter)
- Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar)
- Add support for hardware trip points for the rcar gen3 thermal driver
and store TSC id as unsigned int (Niklas Söderlund)
- Replace the deprecated CPU-hotplug functions get_online_cpus() and
put_online_cpus (Sebastian Andrzej Siewior)
- Add the thermal tools directory in the MAINTAINERS file (Daniel
Lezcano)
- Fix the Makefile and the cross compilation flags for the userspace
'tmon' tool (Rolf Eike Beer)
- Allow to use the IMOK independently from the GDDV on Int340x (Sumeet
Pawnikar)
- Fix the stub thermal_cooling_device_register() function prototype
which does not match the real function (Arnd Bergmann)
- Make the thermal trip point optional in the DT bindings (Maxime
Ripard)
- Fix a typo in a comment in the core code (Geert Uytterhoeven)
- Reduce the verbosity of the trace in the SoC thermal tegra driver
(Dmitry Osipenko)
- Add the support for the LMh (Limit Management hardware) driver on the
QCom platforms (Thara Gopinath)
- Allow processing of HWP interrupt by adding a weak function in the
Intel driver (Srinivas Pandruvada)
- Prevent an abort of the sensor probe is a channel is not used
(Matthias Kaehlcke)
* tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
thermal/drivers/intel: Allow processing of HWP interrupt
dt-bindings: thermal: Add dt binding for QCOM LMh
thermal/drivers/qcom: Add support for LMh driver
firmware: qcom_scm: Introduce SCM calls to access LMh
thermal/drivers/tegra-soctherm: Silence message about clamped temperature
thermal: Spelling s/scallbacks/callbacks/
dt-bindings: thermal: Make trips node optional
thermal/core: Fix thermal_cooling_device_register() prototype
thermal/drivers/int340x: Use IMOK independently
tools/thermal/tmon: Add cross compiling support
thermal/tools/tmon: Improve the Makefile
MAINTAINERS: Add missing userspace thermal tools to the thermal section
thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.
thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points
drivers/thermal/intel: Add TCC cooling support for AlderLake platform
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
thermal/drivers/tegra: Correct compile-testing of drivers
thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
Pull input updates from Dmitry Torokhov:
- several device tree bindings for input devices have been converted to
yaml
- dropped no longer used ixp4xx-beeper and CSR Prima2 PWRC drivers
- analog joystick has been converted to use ktime API and no longer
warn about low resolution timers
- a few driver fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
Input: analog - always use ktime functions
Input: mms114 - support MMS134S
Input: elan_i2c - reduce the resume time for controller in Whitebox
Input: edt-ft5x06 - added case for EDT EP0110M09
Input: adc-keys - drop bogus __refdata annotation
Input: Fix spelling mistake in Kconfig "useable" -> "usable"
Input: Fix spelling mistake in Kconfig "Modul" -> "Module"
Input: remove dead CSR Prima2 PWRC driver
Input: adp5589-keys - use the right header
Input: adp5588-keys - use the right header
dt-bindings: input: tsc2005: Convert to YAML schema
Input: ep93xx_keypad - prepare clock before using it
dt-bindings: input: sun4i-lradc: Add wakeup-source
dt-bindings: input: Convert Regulator Haptic binding to a schema
dt-bindings: input: Convert Pixcir Touchscreen binding to a schema
dt-bindings: input: Convert ChipOne ICN8318 binding to a schema
Input: pm8941-pwrkey - fix comma vs semicolon issue
dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml
dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml
dt-bindings: power: reset: Change 'additionalProperties' to true
...
'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum'
is more concise and yields better error messages.
Fix a couple more cases which have appeared.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Mark Brown <broonie@kernel.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Aswath Govindraju <a-govindraju@ti.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210910165153.2843871-1-robh@kernel.org
A collection of small fixes that have been gathered before rc1,
including a few regression fixes for the problem in the previous
pull request.
-----BEGIN PGP SIGNATURE-----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=eeri
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered before rc1,
including a few regression fixes for the problem in the previous pull
request"
* tag 'sound-fix-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: gus: Fix repeated probe for ISA interwave card
ALSA: gus: Fix repeated probes of snd_gus_create()
ALSA: vx222: fix null-ptr-deref
ASoC: rockchip: i2s: Fix concurrency between tx/rx
ASoC: mt8195: correct the dts parsing logic about DPTX and HDMITX
ASoC: Intel: boards: Fix CONFIG_SND_SOC_SDW_MOCKUP select
ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX8ULP
ALSA: usb-audio: Add registration quirk for JBL Quantum 800
ASoC: rt5682: fix headset background noise when S3 state
ASoC: dt-bindings: mt8195: remove dependent headers in the example
ASoC: mediatek: SND_SOC_MT8195 should depend on ARCH_MEDIATEK
ASoC: samsung: s3c24xx_simtec: fix spelling mistake "devicec" -> "device"
ASoC: audio-graph: respawn Platform Support
ASoC: mediatek: mt8195: add MTK_PMIC_WRAP dependency
New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc
Also contains, bus_remove_return_void-5.15 to resolve dependencies
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmE4PBwACgkQfBQHDyUj
g0euABAArP/f4o6yxtlPj5hwk2ZLw4QRTZEFevn0qULuwHazxGSKVhJEZVz2asYM
S6I6jSvfKYwdO8/s3EVV0jkz4Uxdl4JUzakeMbEsISNF+hacgIhTxuXkgQkvAre9
N3/WQgHLRShe+P3mbX/uN4JyXSMQoWCPUy3yk5xxQvuyBy9zgiW8c5rMiwDNsG3c
wF+kX8520Py1QlcK+q5wF+giklAcraPV+buAvJysOukQwxMQjSd2SIMG63Xa+cNx
ssvj39au9VInfKYyVioWIUdNQcTRa8+3Ctv6eI44F77x9LfvjBsOLT/dy+BbOCCQ
7zHAlrBJ6UhpGi7WHk+Tnb4RispjdWNAdEvqWU/EHZNk2II/Lb8IJjDnu3wSuXKy
AU1uiQ8b6uEY5rKj1lc7XxKw0xGArJEUt7r24z6KNQ7kiYOD4z7G759syGC5atml
q5m0rY8I7zI7OGhPJIpaAOh+urdWLsdVvgywRoHrKS0NiUXVAAkfbmvHgm5WboLu
INDbm/HWdqvxo2LqnBj/+NSArhvFfrQyUt/po6lYkPddbG0xARAWsjqra+X8XTvR
n4P/qlydzCl9QkJGnfM6JrsKGikegNnFvXMUR9kO6Go6IGM9Ea8JD4K6GYk84+yy
jrSFJCQsS54I97UIRAGrpGW6qVQUYsFiPUtSM2cCuBOwTG03Wz4=
=RYbR
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc"
* tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (83 commits)
dmaengine: sh: fix some NULL dereferences
dmaengine: sh: Fix unused initialization of pointer lmdesc
MAINTAINERS: Fix AMD PTDMA DRIVER entry
dmaengine: ptdma: remove PT_OFFSET to avoid redefnition
dmaengine: ptdma: Add debugfs entries for PTDMA
dmaengine: ptdma: register PTDMA controller as a DMA resource
dmaengine: ptdma: Initial driver for the AMD PTDMA
dmaengine: fsl-dpaa2-qdma: Fix spelling mistake "faile" -> "failed"
dmaengine: idxd: remove interrupt disable for dev_lock
dmaengine: idxd: remove interrupt disable for cmd_lock
dmaengine: idxd: fix setting up priv mode for dwq
dmaengine: xilinx_dma: Set DMA mask for coherent APIs
dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX
dmaengine: sh: Add DMAC driver for RZ/G2L SoC
dmaengine: Extend the dma_slave_width for 128 bytes
dt-bindings: dma: Document RZ/G2L bindings
dmaengine: ioat: depends on !UML
dmaengine: idxd: set descriptor allocation size to threshold for swq
dmaengine: idxd: make submit failure path consistent on desc freeing
dmaengine: idxd: remove interrupt flag for completion list spinlock
...
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register
with the Energy Model in a consistent way and make several
drivers use it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because
the notification in question is triggered prematurely on some
systems (Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while
at it (Rob Herring).
-----BEGIN PGP SIGNATURE-----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=WSpr
-----END PGP SIGNATURE-----
Merge tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly ARM cpufreq driver updates, including one new
MediaTek driver that has just passed all of the reviews, with the
addition of a revert of a recent intel_pstate commit, some core
cpufreq changes and a DT-related update of the operating performance
points (OPP) support code.
Specifics:
- Add new cpufreq driver for the MediaTek MT6779 platform called
mediatek-hw along with corresponding DT bindings (Hector.Yuan).
- Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara
Gopinath).
- Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu
policy flag (Taniya Das).
- Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn
Andersson).
- Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV
flag (Viresh Kumar).
- Add new cpufreq driver callback to allow drivers to register with
the Energy Model in a consistent way and make several drivers use
it (Viresh Kumar).
- Change the remaining users of the .ready() cpufreq driver callback
to move the code from it elsewhere and drop it from the cpufreq
core (Viresh Kumar).
- Revert recent intel_pstate change adding HWP guaranteed performance
change notification support to it that led to problems, because the
notification in question is triggered prematurely on some systems
(Rafael Wysocki).
- Convert the OPP DT bindings to DT schema and clean them up while at
it (Rob Herring)"
* tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
dt-bindings: opp: Convert to DT schema
dt-bindings: Clean-up OPP binding node names in examples
ARM: dts: omap: Drop references to opp.txt
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
...
* pm-cpufreq:
Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification"
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Remove ready() callback
cpufreq: sh: Remove sh_cpufreq_cpu_ready()
cpufreq: acpi: Remove acpi_cpufreq_cpu_ready()
cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
cpufreq: scmi: Use .register_em() to register with energy model
cpufreq: vexpress: Use .register_em() to register with energy model
cpufreq: scpi: Use .register_em() to register with energy model
cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model
cpufreq: omap: Use .register_em() to register with energy model
cpufreq: mediatek: Use .register_em() to register with energy model
cpufreq: imx6q: Use .register_em() to register with energy model
cpufreq: dt: Use .register_em() to register with energy model
cpufreq: Add callback to register with energy model
cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag
This moves the crash recovery worker to the freezable work queue to
avoid interaction with other drivers during suspend & resume. It fixes a
couple of typos in comments.
It adds support for handling the audio DSP on SDM660 and it fixes a race
between the Qualcomm wireless subsystem driver and the associated driver
for the RF chip.
-----BEGIN PGP SIGNATURE-----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=EX0n
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
- move the crash recovery worker to the freezable work queue to avoid
interaction with other drivers during suspend & resume
- fix a couple of typos in comments
- add support for handling the audio DSP on SDM660
- fix a race between the Qualcomm wireless subsystem driver and the
associated driver for the RF chip
* tag 'rproc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
remoteproc: q6v5_pas: Add sdm660 ADSP PIL compatible
dt-bindings: remoteproc: qcom: adsp: Add SDM660 ADSP
remoteproc: use freezable workqueue for crash notifications
remoteproc: fix kernel doc for struct rproc_ops
remoteproc: fix an typo in fw_elf_get_class code comments
remoteproc: qcom: wcnss: Fix race with iris probe
- Add support for registering devices via MFD cells to Simple MFD (I2C)
- New Drivers
- Add support for Renesas Synchronization Management Unit (SMU)
- New Device Support
- Add support for N5010 to Intel M10 BMC
- Add support for Cannon Lake to Intel LPSS ACPI
- Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
- Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86
- New Functionality
- Add support for GPIO to Intel LPC ICH
- Add support for Reset to Texas Instruments TPS65086
- Fix-ups
- Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
- Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
- Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
- Pass 'supplied-from' property through axp288_fuel_gauge via swnode
- Remove unused file entry; MAINTAINERS
- Make interrupt line optional; tps65086
- Rename db8500-cpuidle driver symbol; db8500-prcmu
- Remove support for unused hardware; tqmx86
- Provide a standard LPC clock frequency for unknown boards; tqmx86
- Remove unused code; ti_am335x_tscadc
- Use of_iomap() instead of ioremap(); syscon
- Bug Fixes
- Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
- Fix incorrect/misleading frequencies; db8500-prcmu
- Mitigate namespace clash with other GPIOBASE users
-----BEGIN PGP SIGNATURE-----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=7Zv8
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Add support for registering devices via MFD cells to Simple MFD (I2C)
New Drivers:
- Add support for Renesas Synchronization Management Unit (SMU)
New Device Support:
- Add support for N5010 to Intel M10 BMC
- Add support for Cannon Lake to Intel LPSS ACPI
- Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
- Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86
New Functionality:
- Add support for GPIO to Intel LPC ICH
- Add support for Reset to Texas Instruments TPS65086
Fix-ups:
- Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
- Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
- Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
- Pass 'supplied-from' property through axp288_fuel_gauge via swnode
- Remove unused file entry; MAINTAINERS
- Make interrupt line optional; tps65086
- Rename db8500-cpuidle driver symbol; db8500-prcmu
- Remove support for unused hardware; tqmx86
- Provide a standard LPC clock frequency for unknown boards; tqmx86
- Remove unused code; ti_am335x_tscadc
- Use of_iomap() instead of ioremap(); syscon
Bug Fixes:
- Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
- Fix incorrect/misleading frequencies; db8500-prcmu
- Mitigate namespace clash with other GPIOBASE users"
* tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits)
mfd: lpc_sch: Rename GPIOBASE to prevent build error
mfd: syscon: Use of_iomap() instead of ioremap()
dt-bindings: mfd: Add Broadcom CRU
mfd: ti_am335x_tscadc: Delete superfluous error message
mfd: tqmx86: Assume 24MHz LPC clock for unknown boards
mfd: tqmx86: Add support for TQ-Systems DMI IDs
mfd: tqmx86: Add support for TQMx110EB and TQMxE40x
mfd: tqmx86: Fix typo in "platform"
mfd: tqmx86: Remove incorrect TQMx90UC board ID
mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
mfd: simple-mfd-i2c: Add support for registering devices via MFD cells
mfd/cpuidle: ux500: Rename driver symbol
mfd: tps65086: Add cell entry for reset driver
mfd: tps65086: Make interrupt line optional
dt-bindings: mfd: Convert tps65086.txt to YAML
MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming
mfd: db8500-prcmu: Handle missing FW variant
mfd: db8500-prcmu: Rename register header
mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell
mfd: Don't use irq_create_mapping() to resolve a mapping
...
Pull more ARM cpufreq changes for v5.15-rc1 from Viresh Kumar:
"This adds a new cpufreq driver for Mediatek, which had been going
through reviews since last one year."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Add support for CPUFREQ HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
CRU is a block used in e.g. Northstar devices. It can be seen in the
bcm5301x.dtsi and this binding documents its proper usage.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch adds binding for virtio I2C device, it is based on
virtio-device bindings.
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/33c317b95097ce491845c697db1e8285e3ec1d41.1627362340.git.viresh.kumar@linaro.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Allow virtio device sub-nodes to be added to the virtio mmio or pci
nodes. The compatible property for virtio device must be of the format
"virtio,device<ID>", where ID is virtio device ID in hexadecimal format.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/d8319fd18df7086b12cdcc23193c313893aa071a.1627362340.git.viresh.kumar@linaro.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rob Herring <robh@kernel.org>
* Support for PC-relative instructions (auipc and branches) in kprobes.
* Support for forced IRQ threading.
* Support for the hlt/nohlt kernel command line options, via the generic
idle loop.
* Support for showing the edge/level triggered behavior of interrupts in
/proc/interrupts.
* A handful of cleanups to our address mapping mechanisms.
* Support for allocating gigantic hugepages via CMA.
* Support for the undefined behavior sanitizer.
* A handful of cleanups to the VDSO that allow the kernel to build with
LLD.
* Support for hugepage migration.
-----BEGIN PGP SIGNATURE-----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=rDB3
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- support PC-relative instructions (auipc and branches) in kprobes
- support for forced IRQ threading
- support for the hlt/nohlt kernel command line options, via the
generic idle loop
- show the edge/level triggered behavior of interrupts
in /proc/interrupts
- a handful of cleanups to our address mapping mechanisms
- support for allocating gigantic hugepages via CMA
- support for the undefined behavior sanitizer (UBSAN)
- a handful of cleanups to the VDSO that allow the kernel to build with
LLD.
- support for hugepage migration
* tag 'riscv-for-linus-5.15-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
riscv: add support for hugepage migration
RISC-V: Fix VDSO build for !MMU
riscv: use strscpy to replace strlcpy
riscv: explicitly use symbol offsets for VDSO
riscv: Enable Undefined Behavior Sanitizer UBSAN
riscv: Keep the riscv Kconfig selects sorted
riscv: Support allocating gigantic hugepages using CMA
riscv: fix the global name pfn_base confliction error
riscv: Move early fdt mapping creation in its own function
riscv: Simplify BUILTIN_DTB device tree mapping handling
riscv: Use __maybe_unused instead of #ifdefs around variable declarations
riscv: Get rid of map_size parameter to create_kernel_page_table
riscv: Introduce va_kernel_pa_offset for 32-bit kernel
riscv: Optimize kernel virtual address conversion macro
dt-bindings: riscv: add starfive jh7100 bindings
riscv: Enable GENERIC_IRQ_SHOW_LEVEL
riscv: Enable idle generic idle loop
riscv: Allow forced irq threading
riscv: Implement thread_struct whitelist for hardened usercopy
riscv: kprobes: implement the branch instructions
...
