It is possible that adev->dm.dc->caps.max_links is greater than
AMDGPU_MAX_CRTCS. So, to not potentially access unallocated memory use
adev->mode_info.num_crtc to do the bounds check instead of
adev->dm.dc->caps.max_links.
Fixes: 1b11ff764a ("drm/amd/display: Implement multiple secure display")
Fixes: b8ff7e08ba ("drm/amd/display: Fix when disabling secure_display")
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfree() & vfree() internally performs NULL check on the pointer handed
to it and take no action if it indeed is NULL. Hence there is no need
for a pre-check of the memory pointer before handing it to
kfree()/vfree().
Issue reported by ifnullfree.cocci Coccinelle semantic patch script.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The `amdgpu_ucode_release` helper is for symmetry on unloading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If DMUB is required for an ASIC, ensure that the microcode is available
and validates during early_init.
Any failures will cause the driver to fail to probe before the firmware
framebuffer has been removed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch report warning as follows:
Line 53679: drivers/gpu/drm/amd/display/dc/core/dc_stream.c:402
dc_stream_set_cursor_position() warn: variable dereferenced before
check 'stream'
The value of 'dc' has been assigned after check whether 'stream' is
NULL. Fix it by remove redundant assignment.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, there are issues with enabling PSR-SU + DSC. This stems from
the fact that DSC imposes a slice height on transmitted video data and
we are not conforming to that slice height in PSR-SU regions. So, pass
slice_height into su_y_granularity to feed the DSC slice height into
PSR-SU code.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Rename securedisplay_cmd to ta_securedisplay_cmd.
2. Rename ta_securedisplay_max_phy to ta_securedisplay_phy_ID.
3. update securedisplay_cmd to ta_securedisplay_cmd
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Remove redundant log in DSC that just add additional blank prints
Signed-off-by: Praful Swarnakar <praful.swarnakar@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following errors occurred when using gcc 7.5.0-3ubuntu1~18.04:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c: In function ‘dc_stream_remove_writeback’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:543:55: warning: array subscript is above array bounds [-Warray-bounds]
stream->writeback_info[j] = stream->writeback_info[i];
~~~~~~~~~~~~~~~~~~~~~~^~~
Add a check to make sure that num_wb_info won't overflowing the writeback_info buffer.
Fixes: 6fbefb84a98e ("drm/amd/display: Add DC core changes for DCN2")
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx pointer cannot be NULL when getting the address of
an element of the pipe_ctx array. Moreover, the MAX_PIPES is
defined as 6, so pipe_ctx is not NULL after the loop either.
Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix all kernel-doc warnings in dc/core/dc.c:
dc.c:385: warning: missing initial short description on line:
* dc_stream_adjust_vmin_vmax:
dc.c:392: warning: contents before sections
dc.c:399: warning: No description found for return value of 'dc_stream_adjust_vmin_vmax'
dc.c:434: warning: Excess function parameter 'adjust' description in 'dc_stream_get_last_used_drr_vtotal'
dc.c:434: warning: No description found for return value of 'dc_stream_get_last_used_drr_vtotal'
dc.c:574: warning: No description found for return value of 'dc_stream_configure_crc'
dc.c:1746: warning: No description found for return value of 'dc_commit_state_no_check'
dc.c:4991: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* dc_extended_blank_supported 0 Decide whether extended blank is supported
dc.c:4991: warning: missing initial short description on line:
* dc_extended_blank_supported 0 Decide whether extended blank is supported
dc.c:4723: warning: Function parameter or member 'dc' not described in 'dc_enable_dmub_outbox'
dc.c:4926: warning: Function parameter or member 'dc' not described in 'dc_process_dmub_dpia_hpd_int_enable'
dc.c:4926: warning: Function parameter or member 'hpd_int_enable' not described in 'dc_process_dmub_dpia_hpd_int_enable'
12 warnings
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit de05abe6b9.
The bug referenced below was bisected to this commit. There has been no
activity toward fixing it in 3 months, so let's revert for now.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2162
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dmub_outbox_irq_info_funcs is defined in the
irq_service_dcn201.c file, but not called elsewhere, so remove this
unused function.
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn201/irq_service_dcn201.c:139:43: warning: unused variable 'dmub_outbox_irq_info_funcs'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3520
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We skip dsc_validation on pipes that are underlays, but in the
acquire_dsc code we don't have this check.
In certain conditions (when underlay pipe index is lower) we will assign
the dsc resource to the underlay pipe and skip the base pipe.
Now during dsc_validation we will skip the underlay pipe (this has the
dsc resource) but try to validate the base pipe(this doesn't have a dsc
resource) due to this mismatch we hit a NULLPTR
[How]
In the acquire_dsc add a check for underlay pipe so we
don't acquire a dsc resource for this pipe. This will match the
acquire/validation conditions.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Hersen Wu <Hersenxs.Wu@amd.com>
Acked-by: Praful Swarnakar <Praful.Swarnakar@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
By moving bw_ctx field to the end of the dc_state the state can be
cleared more efficiently without resulting in large DML memcpy
operations, resulting in better mode enumeration performance on some
platforms.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
For certain features, there will be more implementations needed in the if-block.
Braces are added as part of the preparation.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
ignore_msa_timing_param is used by SubVP logic to determine if SubVP
+ DRR is possible. Linux does not support freesync on multi display
config, which results in incorrect assumption of VRR support if we
set this parameter when VRR is supported, but not enabled.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
During DP2.1 LL CTS if test equipment requests to change between
DP2.1 and DP1.4 link rates, we need to swap between HPO and DIO
encoders by remapping encoder resource.
[how]
Add a function dc resource to update encoder resources and toggle
dpms state for all enabled stream associated witht the link under test.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Pixel rate div depends on the type of encoder
that we are enabling stream with. If we swap between
HPO and DIO encoder at the time we call enable stream
for the new encoder, we must reprogram pixel rate div
based on the new encoder type.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why] dccg clock programming shouldn't be part of link hwss programming
sequence. The scope of link hwss is limited to encoder and phy
programming.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function is meant to be used on multi-edp systems and only makes sense
if only links with connected panels are considered.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On some monitors we see a brief flash of corruption during the
monitor disable sequence caused by FIFO being disabled in the middle
of an active DP stream.
[How]
Wait until DP vid stream is disabled before turning off the FIFO.
The FIFO reset on DP unblank should take care of clearing any FIFO
error, if any.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN301 resource function is missing function pointer to
handle cases with unknown plane state.
This causes assertion when global state is validated while
using swizzle parameter as “DC_UNKNOWN”
[How]
Add function pointer to handle and patch cases when plane
state is unknown.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com>
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Proper phantom pipe disable sequence was missing in
commit_planes_for_stream
- If disabling phantom pipe, turn on phantom OTG first, and turn
off the phantom OTG after the plane is disabled
- Also update sequence for enabling / disabling phantom streams
(apply_ctx_to_hw). When enabling phantom pipes, enable before
doing front end programming for phantom pipes. If disabling
phantom pipes, disable after front end programming (i.e. after
phantom plane disable)
- TODO: Still need to properly handle transition case when a phantom
pipe is transitioned directly into a real pipe (need to fully disable
the phantom pipe first)
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
- Need error message when failing to allocating secure_display_ctx.
- Need to check if secure display context in psp is initialized or not
before using it.
[How]
- Add error message when memory allocation fail.
- Add check before accessing psp secure display context.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SwathSizePerSurfaceY[] and SwathSizePerSurfaceC[] values are uninitialized
because we are using += instead of = operator.
[How]
Assign values in loop with = operator.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
multiple display hdcp are enabled within event_property_validate,
event_property_update by looping all displays on mst hub. when
one of display on mst hub in unplugged or disabled, hdcp are
disabled for all displays on mst hub within hdcp_reset_display
by looping all displays of mst link. for displays still active,
their encryption status are off. kernel driver will not run hdcp
authentication again. therefore, hdcp are not enabled automatically.
[How]
within is_content_protection_different, check drm_crtc_state changes
of all displays on mst hub, if need, triger hdcp_update_display to
re-run hdcp authentication.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Technically all of those can use GTT as well, no need to force things
into VRAM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following checkpatch checks in amdgpu_dm.c
CHECK: Prefer kernel type 'u8' over 'uint8_t'
CHECK: Prefer kernel type 'u32' over 'uint32_t'
CHECK: Prefer kernel type 'u64' over 'uint64_t'
CHECK: Prefer kernel type 's32' over 'int32_t'
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
connector hdcp properties are lost after display is
unplgged from mst hub. connector is destroyed with
dm_dp_mst_connector_destroy. when display is plugged
back, hdcp is not desired and it wouldnt be enabled.
[How]
save hdcp properties into hdcp_work within
amdgpu_dm_atomic_commit_tail. If the same display is
plugged back with same display index, its hdcp
properties will be retrieved from hdcp_work within
dm_dp_mst_get_modes.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Current policy does not support HDMI VRR by default, so we
cannot enable FPO / SubVP (DRR) cases
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
-Fix array index out of bound error
-Speed up DML fast vadlaite
-Implement multiple secure display
-MST HDCP for multiple display
-Add DPIA notification
-Add support for three new square pattern variant
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
On dcn32, HW supports odm transition in fast update. Hence this
error message is considered false positive. Downgrade the error level
to avoid catching unnecessary attention.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DP2.1 specs has brought 3 new variants of sqaure patterns with different
pre-shoot and de-emphasis equalization requirements. The commit adds
logic to identify these variants and apply corresponding eqaulization
requirements into hardware lane settings.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Subvp portion validation currently assumes that if vlevel provided does not
support pstate, then none will, and so subvp is not used.
[HOW]
After get vlevel, use lowest vlevel that supports pstate if it
exists, and use that for subvp validation.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When we have a PSR display, we will not be requesting data from memory anymore.
So we report back true for no memory request case.
[How]
Check for PSR by checking PSR version in link settings
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When merging a pipe that was previously pipe split, we need
to also clear the link resources or the next stream/plane that
uses the pipe may have an incorrect link resource state
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Adding the new DPIA NOTIFY packets from DMUB
As per the design with Cruise to account for
250ms response delay otherwise
[HOW]
Added th DPIA NOTIFY logic as per DMUB logic
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In case of failure to resume MST topology after suspend, an emtpty
mst tree prevents further mst hub detection on the same connector.
That causes the issue with MST hub hotplug after it's been unplug in
suspend.
[How]
Stop topology manager on the connector after detecting DM_MST failure.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
in dc_link_dp there still exist a few places where we call dio encoders
without checking current enabled encoder type.
The change is to make these places to call hwss equivalent functions so
it won't mistakenly program a wrong type encoder.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Workaround no longer needed.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Fixing smatch error:
dm_resume() error: we previously assumed 'aconnector->dc_link' could be null
[How]
Check if dc_link null at the beginning of the loop,
so further checks can be dropped.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It causes regression AMD source will not write DPCD 340.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- FW scheduling algorithm doesn't take into account of it's
a center timing
- This affects where the subvp mclk switch can be scheduled
(prevents HUBP vline interrupt from coming in if scheduled
incorrectly)
- Block subvp center timing cases for now
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Modify soc BB to reduce expected sdp bandwidth and align with measurements to
fix underflow issues.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Add debug bit to disable unbounded requesting.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
