Initialize to zero structures to build a valid
Tx Packet used for the filter programming.
Fixes: a9219b332f ("i40e: VLAN field for flow director")
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a system with E810 with existing VFs gets rebooted the following
hang may be observed.
Pid 1 is hung in iavf_remove(), part of a network driver:
PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow"
#0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb
#1 [ffffaad04005fae8] schedule at ffffffff8b323e2d
#2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc
#3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930
#4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf]
#5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513
#6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa
#7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc
#8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e
#9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429
#10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4
#11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice]
#12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice]
#13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice]
#14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1
#15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386
#16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870
#17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6
#18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159
#19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc
#20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d
#21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169
#22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b
RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7
RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead
RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90
R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005
R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000
ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b
During reboot all drivers PM shutdown callbacks are invoked.
In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE.
In ice_shutdown() the call chain above is executed, which at some point
calls iavf_remove(). However iavf_remove() expects the VF to be in one
of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If
that's not the case it sleeps forever.
So if iavf_shutdown() gets invoked before iavf_remove() the system will
hang indefinitely because the adapter is already in state __IAVF_REMOVE.
Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE,
as we already went through iavf_shutdown().
Fixes: 974578017f ("iavf: Add waiting so the port is initialized in remove")
Fixes: a8417330f8 ("iavf: Fix race condition between iavf_shutdown and iavf_remove")
Reported-by: Marius Cornea <mcornea@redhat.com>
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-16 (igb, igbvf, igc)
This series contains updates to igb, igbvf, and igc drivers.
Lin Ma removes rtnl_lock() when disabling SRIOV on remove which was
causing deadlock on igb.
Akihiko Odaki delays enabling of SRIOV on igb to prevent early messages
that could get ignored and clears MAC address when PF returns nack on
reset; indicating no MAC address was assigned for igbvf.
Gaosheng Cui frees IRQs in error path for igbvf.
Akashi Takahiro fixes logic on checking TAPRIO gate support for igc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-16 (iavf)
This series contains updates to iavf driver only.
Alex fixes incorrect check against Rx hash feature and corrects payload
value for IPv6 UDP packet.
Ahmed removes bookkeeping of VLAN 0 filter as it always exists and can
cause a false max filter error message.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: do not track VLAN 0 filters
iavf: fix non-tunneled IPv6 UDP packet type and hashing
iavf: fix inverted Rx hash condition leading to disabled hash
====================
Link: https://lore.kernel.org/r/20230316155316.1554931-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The check introduced in the commit a5fd39464a ("igc: Lift TAPRIO schedule
restriction") can detect a false positive error in some corner case.
For instance,
tc qdisc replace ... taprio num_tc 4
...
sched-entry S 0x01 100000 # slot#1
sched-entry S 0x03 100000 # slot#2
sched-entry S 0x04 100000 # slot#3
sched-entry S 0x08 200000 # slot#4
flags 0x02 # hardware offload
Here the queue#0 (the first queue) is on at the slot#1 and #2,
and off at the slot#3 and #4. Under the current logic, when the slot#4
is examined, validate_schedule() returns *false* since the enablement
count for the queue#0 is two and it is already off at the previous slot
(i.e. #3). But this definition is truely correct.
Let's fix the logic to enforce a strict validation for consecutively-opened
slots.
Fixes: a5fd39464a ("igc: Lift TAPRIO schedule restriction")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
vf reset nack actually represents the reset operation itself is
performed but no address is assigned. Therefore, e1000_reset_hw_vf
should fill the "perm_addr" with the zero address and return success on
such an occasion. This prevents its callers in netdev.c from saying PF
still resetting, and instead allows them to correctly report that no
address is assigned.
Fixes: 6ddbc4cf1f ("igb: Indicate failure on vf reset for empty mac address")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In igbvf_request_msix(), irqs have not been freed on the err path,
we need to free it. Fix it.
Fixes: d4e0fe01a3 ("igbvf: add new driver to support 82576 virtual functions")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Enabling SR-IOV causes the virtual functions to make requests to the
PF via the mailbox. Notably, E1000_VF_RESET request will happen during
the initialization of the VF. However, unless the reinit is done, the
VMMB interrupt, which delivers mailbox interrupt from VF to PF will be
kept masked and such requests will be silently ignored.
Enable SR-IOV at the very end of the procedure to configure the device
for SR-IOV so that the PF is configured properly for SR-IOV when a VF is
activated.
Fixes: fa44f2f185 ("igb: Enable SR-IOV configuration via PCI sysfs interface")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When an interface with the maximum number of VLAN filters is brought up,
a spurious error is logged:
[257.483082] 8021q: adding VLAN 0 to HW filter on device enp0s3
[257.483094] iavf 0000:00:03.0 enp0s3: Max allowed VLAN filters 8. Remove existing VLANs or disable filtering via Ethtool if supported.
The VF driver complains that it cannot add the VLAN 0 filter.
On the other hand, the PF driver always adds VLAN 0 filter on VF
initialization. The VF does not need to ask the PF for that filter at
all.
Fix the error by not tracking VLAN 0 filters altogether. With that, the
check added by commit 0e710a3ffd ("iavf: Fix VF driver counting VLAN 0
filters") in iavf_virtchnl.c is useless and might be confusing if left as
it suggests that we track VLAN 0.
Fixes: 0e710a3ffd ("iavf: Fix VF driver counting VLAN 0 filters")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, IAVF's decode_rx_desc_ptype() correctly reports payload type
of L4 for IPv4 UDP packets and IPv{4,6} TCP, but only L3 for IPv6 UDP.
Originally, i40e, ice and iavf were affected.
Commit 73df8c9e3e ("i40e: Correct UDP packet header for non_tunnel-ipv6")
fixed that in i40e, then
commit 638a0c8c88 ("ice: fix incorrect payload indicator on PTYPE")
fixed that for ice.
IPv6 UDP is L4 obviously. Fix it and make iavf report correct L4 hash
type for such packets, so that the stack won't calculate it on CPU when
needs it.
Fixes: 206812b5fc ("i40e/i40evf: i40e implementation for skb_set_hash")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Condition, which checks whether the netdev has hashing enabled is
inverted. Basically, the tagged commit effectively disabled passing flow
hash from descriptor to skb, unless user *disables* it via Ethtool.
Commit a876c3ba59 ("i40e/i40evf: properly report Rx packet hash")
fixed this problem, but only for i40e.
Invert the condition now in iavf and unblock passing hash to skbs again.
Fixes: 857942fd1a ("i40e: Fix Rx hash reported to the stack by our driver")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
RDMA is not supported in ice on a PF that has been added to a bonded
interface. To enforce this, when an interface enters a bond, we unplug
the auxiliary device that supports RDMA functionality. This unplug
currently happens in the context of handling the netdev bonding event.
This event is sent to the ice driver under RTNL context. This is causing
a deadlock where the RDMA driver is waiting for the RTNL lock to complete
the removal.
Defer the unplugging/re-plugging of the auxiliary device to the service
task so that it is not performed under the RTNL lock context.
Cc: stable@vger.kernel.org # 6.1.x
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/
Fixes: 5cb1ebdbc4 ("ice: Fix race condition during interface enslave")
Fixes: 4eace75e08 ("RDMA/irdma: Report the correct link speed")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With older compilers like gcc-9, the calculation of the vlan
priority field causes a false-positive warning from the byteswap:
In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4:
drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower':
include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow]
15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \
| ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16'
106 | ___constant_swab16(x) : \
| ^~~~~~~~~~~~~~~~~~
include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16'
42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
| ^~~~~~~~
include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16'
96 | #define cpu_to_be16 __cpu_to_be16
| ^~~~~~~~~~~~~
drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16'
1458 | cpu_to_be16((match.key->vlan_priority <<
| ^~~~~~~~~~~
After a change to be16_encode_bits(), the code becomes more
readable to both people and compilers, which avoids the warning.
Fixes: 34800178b3 ("ice: Add support for VLAN priority filters in switchdev")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There were few smatch warnings reported by Dan:
- ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner
- return values in ice_vsi_cfg_def were ignored
- in ice_vsi_rebuild return value was ignored in case rebuild failed,
it was a never reached code, however, rewrite it for clarity.
- ice_vsi_cfg_tc can return 0 instead of ret
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When creating the TLV to send to the FW for configuring DSCP mode PFC,the
PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8
bit bitmask for enabled classes for PFC. This means that traffic classes
4-7 could not be enabled for PFC.
Remove the mask completely, as it is not necessary, as we are assigning 8
bits to an 8 bit field.
Fixes: 2a87bd73e5 ("ice: Add DSCP support")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
CONFIG_ICE_GNSS was added by commit c7ef8221ca ("ice: use GNSS subsystem
instead of TTY") as a way to allow the ice driver to optionally support
GNSS features without forcing a dependency on CONFIG_GNSS.
The original implementation of that commit at [1] used IS_REACHABLE. This
was rejected by Olek at [2] with the suggested implementation of
CONFIG_ICE_GNSS.
Eventually after merging, Linus reported a .config which had
CONFIG_ICE_GNSS = y when both GNSS = n and ICE = n. This confused him and
he felt that the config option was not useful, and commented about it at
[3].
CONFIG_ICE_GNSS is defined to y whenever GNSS = ICE. This results in it
being set in cases where both options are not enabled.
The goal of CONFIG_ICE_GNSS is to ensure that the GNSS support in the ice
driver is enabled when GNSS is enabled.
The complaint from Olek about the original IS_REACHABLE was due to the
required IS_REACHABLE checks throughout the ice driver code and the fact
that ice_gnss.c was compiled regardless of GNSS support.
This can be fixed in the Makefile by using ice-$(CONFIG_GNSS) += ice_gnss.o
In this case, if GNSS = m and ICE = y, we can result in some confusing
behavior where GNSS support is not enabled because its not built in. See
[4].
To disallow this, have CONFIG_ICE depend on GNSS || GNSS = n. This ensures
that we cannot enable CONFIG_ICE as builtin while GNSS is a module.
Drop CONFIG_ICE_GNSS, and replace the IS_ENABLED checks for it with
checks for GNSS. Update the Makefile to add the ice_gnss.o object based on
CONFIG_GNSS.
This works to ensure that GNSS support can optionally be enabled, doesn't
have an unnnecessary extra config option, and has Kbuild enforce the
dependency such that you can't accidentally enable GNSS as a module and ICE
as a builtin.
[1] https://lore.kernel.org/intel-wired-lan/20221019095603.44825-1-arkadiusz.kubalewski@intel.com/
[2] https://lore.kernel.org/intel-wired-lan/20221028165706.96849-1-alexandr.lobakin@intel.com/
[3] https://lore.kernel.org/all/CAHk-=wi_410KZqHwF-WL5U7QYxnpHHHNP-3xL=g_y89XnKc-uw@mail.gmail.com/
[4] https://lore.kernel.org/netdev/20230223161309.0e439c5f@kernel.org/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: c7ef8221ca ("ice: use GNSS subsystem instead of TTY")
Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Anthony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+/uBgAKCRDbK58LschI
g0ngAPwJHd1RicBuy2C4fLv0nGKZtmYZBAnTGlI2RisPxU6BRwEAwUDLHuc5K6nR
j261okOxOy/MRxdN1NhmR6Qe7nMyQAk=
=tYU+
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-17
We've added 64 non-merge commits during the last 7 day(s) which contain
a total of 158 files changed, 4190 insertions(+), 988 deletions(-).
The main changes are:
1) Add a rbtree data structure following the "next-gen data structure"
precedent set by recently-added linked-list, that is, by using
kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky.
2) Add a new benchmark for hashmap lookups to BPF selftests,
from Anton Protopopov.
3) Fix bpf_fib_lookup to only return valid neighbors and add an option
to skip the neigh table lookup, from Martin KaFai Lau.
4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory
accouting for container environments, from Yafang Shao.
5) Batch of ice multi-buffer and driver performance fixes,
from Alexander Lobakin.
6) Fix a bug in determining whether global subprog's argument is
PTR_TO_CTX, which is based on type names which breaks kprobe progs,
from Andrii Nakryiko.
7) Prep work for future -mcpu=v4 LLVM option which includes usage of
BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier,
from Eduard Zingerman.
8) More prep work for later building selftests with Memory Sanitizer
in order to detect usages of undefined memory, from Ilya Leoshkevich.
9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer
dereference via sendmsg(), from Maciej Fijalkowski.
10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui.
11) Fix BPF memory allocator in combination with BPF hashtab where it could
corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao.
12) Fix LoongArch BPF JIT to always use 4 instructions for function
address so that instruction sequences don't change between passes,
from Hengqi Chen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
selftests/bpf: Add bpf_fib_lookup test
bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup
riscv, bpf: Add bpf trampoline support for RV64
riscv, bpf: Add bpf_arch_text_poke support for RV64
riscv, bpf: Factor out emit_call for kernel and bpf context
riscv: Extend patch_text for multiple instructions
Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"
selftests/bpf: Add global subprog context passing tests
selftests/bpf: Convert test_global_funcs test to test_loader framework
bpf: Fix global subprog context argument resolution logic
LoongArch, bpf: Use 4 instructions for function address in JIT
bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state
bpf: Disable bh in bpf_test_run for xdp and tc prog
xsk: check IFF_UP earlier in Tx path
Fix typos in selftest/bpf files
selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd()
...
====================
Link: https://lore.kernel.org/r/20230217221737.31122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devlink reload patchset introduced regression. ICE_VSI_LB wasn't
taken into account when doing default allocation. Fix it by adding a
case for ICE_VSI_LB in ice_vsi_alloc_def().
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-14 (ice)
This series contains updates to ice driver only.
Karol extends support for GPIO pins to E823 devices.
Daniel Vacek stops processing of PTP packets when link is down.
Pawel adds support for BIG TCP for IPv6.
Tony changes return type of ice_vsi_realloc_stat_arrays() as it always
returns success.
Zhu Yanjun updates kdoc stating supported TLVs.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Mention CEE DCBX in code comment
ice: Change ice_vsi_realloc_stat_arrays() to void
ice: add support BIG TCP on IPv6
ice/ptp: fix the PTP worker retrying indefinitely if the link went down
ice: Add GPIO pin support for E823 products
====================
Link: https://lore.kernel.org/r/20230214213003.2117125-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit a97f8783a9 ("igb: unbreak I2C bit-banging on i350") introduced
code to change I2C settings to bit banging unconditionally.
However, this patch introduced a regression: On an Intel S2600CWR
Server Board with three NICs:
- 1x dual-port copper
Intel I350 Gigabit Network Connection [8086:1521] (rev 01)
fw 1.63, 0x80000dda
- 2x quad-port SFP+ with copper SFP Avago ABCU-5700RZ
Intel I350 Gigabit Fiber Network Connection [8086:1522] (rev 01)
fw 1.52.0
the SFP NICs no longer get link at all. Reverting commit a97f8783a9
or switching to the Intel out-of-tree driver both fix the problem.
Per the igb out-of-tree driver, I2C bit banging on i350 depends on
support for an external thermal sensor (ETS). However, commit
a97f8783a9 added bit banging unconditionally. Additionally, the
out-of-tree driver always calls init_thermal_sensor_thresh on probe,
while our driver only calls init_thermal_sensor_thresh only in
igb_reset(), and only if an ETS is present, ignoring the internal
thermal sensor. The affected SFPs don't provide an ETS. Per Intel,
the behaviour is a result of i350 firmware requirements.
This patch fixes the problem by aligning the behaviour to the
out-of-tree driver:
- split igb_init_i2c() into two functions:
- igb_init_i2c() only performs the basic I2C initialization.
- igb_set_i2c_bb() makes sure that E1000_CTRL_I2C_ENA is set
and enables bit-banging.
- igb_probe() only calls igb_set_i2c_bb() if an ETS is present.
- igb_probe() calls init_thermal_sensor_thresh() unconditionally.
- igb_reset() aligns its behaviour to igb_probe(), i. e., call
igb_set_i2c_bb() if an ETS is present and call
init_thermal_sensor_thresh() unconditionally.
Fixes: a97f8783a9 ("igb: unbreak I2C bit-banging on i350")
Tested-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Co-developed-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230214185549.1306522-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-14 (ixgbe, i40e)
This series contains updates to ixgbe and i40e drivers.
Jason Xing corrects comparison of frame sizes for setting MTU with XDP on
ixgbe and adjusts frame size to account for a second VLAN header on ixgbe
and i40e.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: add double of VLAN header when computing the max MTU
i40e: add double of VLAN header when computing the max MTU
ixgbe: allow to increase MTU to 3K with XDP enabled
====================
Link: https://lore.kernel.org/r/20230214185146.1305819-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix handling of the tsync interrupt to compare the pin number with
IGB_N_SDP instead of IGB_N_EXTTS/IGB_N_PEROUT and fix the indexing to
the perout array.
Fixes: cf99c1dd7b ("igb: move PEROUT and EXTTS isr logic to separate functions")
Reported-by: Matt Corallo <ntp-lists@mattcorallo.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230213185822.3960072-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From the function ice_parse_org_tlv, CEE DCBX TLV is also supported.
So update the comment. Or else, it is confusing.
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
smatch reports:
smatch warnings:
drivers/net/ethernet/intel/ice/ice_lib.c:3612 ice_vsi_rebuild() warn: missing error code 'ret'
If an error is encountered for ice_vsi_realloc_stat_arrays(), ret is not
assigned an error value so the goto error path would return success. The
function, however, only returns 0 so an error will never be reported; due
to this, change the function to return void.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Enable sending BIG TCP packets on IPv6 in the ice driver using generic
ipv6_hopopt_jumbo_remove helper for stripping HBH header.
Tested:
netperf -t TCP_RR -H 2001:db8:0:f101::1 -- -r80000,80000 -O MIN_LATENCY,P90_LATENCY,P99_LATENCY,TRANSACTION_RATE
Tested on two different setups. In both cases, the following settings were
applied after loading the changed driver:
ip link set dev enp175s0f1np1 gso_max_size 130000
ip link set dev enp175s0f1np1 gro_max_size 130000
ip link set dev enp175s0f1np1 mtu 9000
First setup:
Before:
Minimum 90th 99th Transaction
Latency Percentile Percentile Rate
Microseconds Latency Latency Tran/s
Microseconds Microseconds
134 279 410 3961.584
After:
Minimum 90th 99th Transaction
Latency Percentile Percentile Rate
Microseconds Latency Latency Tran/s
Microseconds Microseconds
135 178 216 6093.404
The other setup:
Before:
Minimum 90th 99th Transaction
Latency Percentile Percentile Rate
Microseconds Latency Latency Tran/s
Microseconds Microseconds
218 414 478 2944.765
After:
Minimum 90th 99th Transaction
Latency Percentile Percentile Rate
Microseconds Latency Latency Tran/s
Microseconds Microseconds
146 238 266 4700.596
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the link goes down the ice_ptp_tx_tstamp() may loop re-trying to
process the packets till the 2 seconds timeout finally drops them.
In such a case it makes sense to just drop them right away.
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add GPIO pin setup for E823, which is only 1PPS input and output.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Include the second VLAN HLEN into account when computing the maximum
MTU size as other drivers do.
Fixes: fabf1bce10 ("ixgbe: Prevent unsupported configurations with XDP")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Include the second VLAN HLEN into account when computing the maximum
MTU size as other drivers do.
Fixes: 0c8493d90b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Recently I encountered one case where I cannot increase the MTU size
directly from 1500 to a much bigger value with XDP enabled if the
server is equipped with IXGBE card, which happened on thousands of
servers in production environment. After applying the current patch,
we can set the maximum MTU size to 3K.
This patch follows the behavior of changing MTU as i40e/ice does.
References:
[1] commit 23b44513c3 ("ice: allow 3k MTU for XDP")
[2] commit 0c8493d90b ("i40e: add XDP support for pass and drop actions")
Fixes: fabf1bce10 ("ixgbe: Prevent unsupported configurations with XDP")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There was a problem reported to us where the addition of a VF with an IPv6
address ending with a particular sequence would cause the parent device on
the PF to no longer be able to respond to neighbor discovery packets.
In this case, we had an ovs-bridge device living on top of a VLAN, which
was on top of a PF, and it would not be able to talk anymore (the neighbor
entry would expire and couldn't be restored).
The root cause of the issue is that if the PF is asked to be in IFF_PROMISC
mode (promiscuous mode) and it had an ipv6 address that needed the
33:33:ff:00:00:04 multicast address to work, then when the VF was added
with the need for the same multicast address, the VF would steal all the
traffic destined for that address.
The ice driver didn't auto-subscribe a request of IFF_PROMISC to the
"multicast replication from other port's traffic" meaning that it won't get
for instance, packets with an exact destination in the VF, as above.
The VF's IPv6 address, which adds a "perfect filter" for 33:33:ff:00:00:04,
results in no packets for that multicast address making it to the PF (which
is in promisc but NOT "multicast replication").
The fix is to enable "multicast promiscuous" whenever the driver is asked
to enable IFF_PROMISC, and make sure to disable it when appropriate.
Fixes: e94d447866 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After the recent mbuf changes, ice_xmit_xdp_ring() became a 3-liner.
It makes no sense to keep it global in a different file than its caller.
Move it just next to the sole call site and mark static. Also, it
doesn't need a full xdp_convert_frame_to_buff(). Save several cycles
and fill only the fields used by __ice_xmit_xdp_ring() later on.
Finally, since it doesn't modify @xdpf anyhow, mark the argument const
to save some more (whole -11 bytes of .text! :D).
Thanks to 1 jump less and less calcs as well, this yields as many as
6.7 Mpps per queue. `xdp.data_hard_start = xdpf` is fully intentional
again (see xdp_convert_buff_to_frame()) and just works when there are
no source device's driver issues.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-7-alexandr.lobakin@intel.com
As already mentioned, freeing any &xdp_frame via page_frag_free() is
wrong, as it assumes the frame is backed by either an order-0 page or
a page with no "patrons" behind them, while in fact frames backed by
Page Pool can be redirected to a device, which's driver doesn't use it.
Keep storing a pointer to the raw buffer and then freeing it
unconditionally via page_frag_free() for %XDP_TX frames, but introduce
a separate type in the enum for frames coming through .ndo_xdp_xmit(),
and free them via xdp_return_frame_bulk(). Note that saving xdpf as
xdp_buff->data_hard_start is intentional and is always true when
everything is configured properly.
After this change, %XDP_REDIRECT from a Page Pool based driver to ice
becomes zero-alloc as it should be and horrendous 3.3 Mpps / queue
turn into 6.6, hehe.
Let it go with no "Fixes:" tag as it spans across good 5+ commits and
can't be trivially backported.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-6-alexandr.lobakin@intel.com
When queueing frames from a Page Pool for redirecting to a device backed
by the ice driver, `perf top` shows heavy load on page_alloc() and
page_frag_free(), despite that on a properly working system it must be
fully or at least almost zero-alloc. The problem is in fact a bit deeper
and raises from how ice cleans up completed Tx buffers.
The story so far: when cleaning/freeing the resources related to
a particular completed Tx frame (skbs, DMA mappings etc.), ice uses some
heuristics only without setting any type explicitly (except for dummy
Flow Director packets, which are marked via ice_tx_buf::tx_flags).
This kinda works, but only up to some point. For example, currently ice
assumes that each frame coming to __ice_xmit_xdp_ring(), is backed by
either plain order-0 page or plain page frag, while it may also be
backed by Page Pool or any other possible memory models introduced in
future. This means any &xdp_frame must be freed properly via
xdp_return_frame() family with no assumptions.
In order to do that, the whole heuristics must be replaced with setting
the Tx buffer/frame type explicitly, just how it's always been done via
an enum. Let us reuse 16 bits from ::tx_flags -- 1 bit-and instr won't
hurt much -- especially given that sometimes there was a check for
%ICE_TX_FLAGS_DUMMY_PKT, which is now turned from a flag to an enum
member. The rest of the changes is straightforward and most of it is
just a conversion to rely now on the type set in &ice_tx_buf rather than
to some secondary properties.
For now, no functional changes intended, the change only prepares the
ground for starting freeing XDP frames properly next step. And it must
be done atomically/synchronously to not break stuff.
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-5-alexandr.lobakin@intel.com
The tagged commit started sending %XDP_TX frames from XSk Rx ring
directly without converting it to an &xdp_frame. However, when XSk is
enabled on a queue pair, it has its separate Tx cleaning functions, so
neither ice_clean_xdp_irq() nor ice_unmap_and_free_tx_buf() ever happens
there.
Remove impossible branches in order to reduce the diffstat of the
upcoming change.
Fixes: a24b4c6e9a ("ice: xsk: Do not convert to buff to frame for XDP_TX")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-4-alexandr.lobakin@intel.com
Sometimes, under heavy XDP Tx traffic, e.g. when using XDP traffic
generator (%BPF_F_TEST_XDP_LIVE_FRAMES), the machine can catch OOM due
to the driver not freeing all of the pages passed to it by
.ndo_xdp_xmit().
Turned out that during the development of the tagged commit, the check,
which ensures that we have a free descriptor to queue a frame, moved
into the branch happening only when a buffer has frags. Otherwise, we
only run a cleaning cycle, but don't check anything.
ATST, there can be situations when the driver gets new frames to send,
but there are no buffers that can be cleaned/completed and the ring has
no free slots. It's very rare, but still possible (> 6.5 Mpps per ring).
The driver then fills the next buffer/descriptor, effectively
overwriting the data, which still needs to be freed.
Restore the check after the cleaning routine to make sure there is a
slot to queue a new frame. When there are frags, there still will be a
separate check that we can place all of them, but if the ring is full,
there's no point in wasting any more time.
(minor: make `!ready_frames` unlikely since it happens ~1-2 times per
billion of frames)
Fixes: 3246a10752 ("ice: Add support for XDP multi-buffer on Tx side")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-3-alexandr.lobakin@intel.com
xdp_tx_active is used to indicate whether an XDP ring has any %XDP_TX
frames queued to shortcut processing Tx cleaning for XSk-enabled queues.
When !XSk, it simply indicates whether the ring has any queued frames in
general.
It gets increased on each frame placed onto the ring and counts the
whole frame, not each frag. However, currently it gets decremented in
ice_clean_xdp_tx_buf(), which is called per each buffer, i.e. per each
frag. Thus, on completing multi-frag frames, an underflow happens.
Move the decrement to the outer function and do it once per frame, not
buf. Also, do that on the stack and update the ring counter after the
loop is done to save several cycles.
XSk rings are fine since there are no frags at the moment.
Fixes: 3246a10752 ("ice: Add support for XDP multi-buffer on Tx side")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230210170618.1973430-2-alexandr.lobakin@intel.com
Currently checks for weight and priority ranges don't check incoming value
from the devlink. Instead it checks node current weight or priority. This
makes those checks useless.
Change range checks in ice_set_object_tx_priority() and
ice_set_object_tx_weight() to check against incoming priority an weight.
Fixes: 42c2eb6b1f ("ice: Implement devlink-rate API")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The result of nlmsg_find_attr() 'br_spec' is dereferenced in
nla_for_each_nested(), but it can take NULL value in nla_find() function,
which will result in an error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 51616018dd ("i40e: Add support for getlink, setlink ndo ops")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230209172833.3596034-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-09 (i40e)
Jan removes i40e_status from the driver; replacing them with standard
kernel error codes.
Kees Cook replaces 0-length array with flexible array.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
net/i40e: Replace 0-length array with flexible array
i40e: use ERR_PTR error print in i40e messages
i40e: use int for i40e_status
i40e: Remove string printing for i40e_status
i40e: Remove unused i40e status codes
====================
Link: https://lore.kernel.org/r/20230209172536.3595838-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Incrementation of xsk_frames inside the for-loop produces
infinite loop, if we have both normal AF_XDP-TX and XDP_TXed
buffers to complete.
Split xsk_frames into 2 variables (xsk_frames and completed_frames)
to eliminate this bug.
Fixes: 29322791bc ("ice: xsk: change batched Tx descriptor cleaning")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230209160130.1779890-1-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+bZrwAKCRDbK58LschI
gzi4AP4+TYo0jnSwwkrOoN9l4f5VO9X8osmj3CXfHBv7BGWVxAD/WnvA3TDZyaUd
agIZTkRs6BHF9He8oROypARZxTeMLwM=
=nO1C
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad2 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
