1
0
Fork 0
mirror of synced 2025-03-06 20:59:54 +01:00
Commit graph

759 commits

Author SHA1 Message Date
Linus Torvalds
aca48b2dd1 ARM: SoC devicetree changes for v5.17
As usual, this is the bulk of the updates for the SoC tree, adding
 more devices to existing files, addressing issues from ever improving
 automated checking, and fixing minor issues.
 
 The most interesting bits as usual are the new platforms.
 All the newly supported SoCs belong into existing families
 this time:
 
  - Qualcomm gets support for two newly announced platforms, both
    of which can now work in production environments: the SDX65
    5G modem that can run a minimal Linux on its Cortex-A7 core,
    and the Snapdragon 8 Gen 1, their latest high-end phone SoC.
 
  - Renesas adds support for R-Car S4-8, the most recent automotive
    Server/Communication SoC.
 
  - TI adds support for J721s2, a new automotive SoC in the K3
    family.
 
  - Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
    generation following their popular MT76xx series. Only basic
    support is added for now.
 
  - NXP i.MX8 ULP8 is a new low-power variant of the widespread
    i.MX8 series.
 
  - TI SPEAr320s is a minor variant of the old SPEAr320 SoC that
    we have supported for a long time.
 
 New boards with the existing SoCs include
 
  - Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
 
  - AT91/SAMA5 based evaluation board
 
  - NXP gains twenty new development and industrial boards for their
    i.MX and Layerscape SoCs
 
  - Intel IXP4xx now supports the final two machines in device tree
    that were previously only supported in old style board files.
 
  - Mediatek MT6589 is used in the Fairphone FP1 phone from 2013,
    while MT8183 is used in the Acer Chromebook 314.
 
  - Qualcomm gains support for the reference machines using the two
    new SoCs, plus a number of Chromebook variants and phones based
    on the Snapdragon 7c, 845 and 888 SoCs, including various
    Sony Xperia devices and the Microsoft Surface Duo 2.
 
  - ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
 
  - Tegra now boots various older Android devices based on 32-bit
    chips out of the box, including a number of ASUS Transformer
    tablets.
    There is also a new Jetson AGX Orin developer kit.
 
  - Apple support adds the missing device trees for all the remaining
    M1 Macbook and iMac variants, though not yet the M1 Pro/Max
    versions.
 
  - Allwinner now supports another version of the Tanix TX6 set-top
    box based on the H6 SoC.
 
  - Broadcom gains support for the Netgear RAXE500 Wireless router
    based on BCM4908.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHDsm4ACgkQmmx57+YA
 GNm9YhAAm0c/uPAkDA/6ESjaMC5qIHnV8CC9ZV24iINqFutcjKm2az8OiqKZT7UW
 a/+n2sfjAiyoAAaXrp/WvyMH2Sula1i/OZpR4GYIbD/lbYRFk+4+iW2YY9vViCjL
 KH6M/H6KfOSNmGcpe3wDvu7D4YWfFKDCDyUJsEaMW2xSQehYbH5P0OuzQW1EROHr
 GQp60QtCbUpMmqIrkJT99MxBGCCyb4dV6BT3iU489/YU3q3pOF8OWMLKv5TlXzfw
 x0pLH5CKavvCFj3iqp80sCEBeSoUecLKVnBRfmwAH1vgfNrhpXh4jP9m1e3Vh3Bb
 aJGZ57W77Akf+TywZEojDdIDQGKcdlzpZNxN2i4e4+LECYvfOdJW8GP18MmsXEY4
 apb0NeKad8FGRI4b97dIVEcTa894JkEZaEtnNaIdjWFhBgzO+Kr2iOTw71AKsJmc
 eIwv4SDdUQTU4VT08ceJTOVt8NikGALJStg5knpVJ9lfHvFlWj1GAE4QnCtS6pUR
 iiyqJ1/7khNplcgowaz6nuC2gSE49UwYQImLvBfG17eT1YU3B2OZg/FZ9xSmr2bW
 Thk+TKO9A6xai8QQWYV99Ae+Y6nDWUrLL5U9DXTn4cm64g5z3VkVKGcNajg/kAad
 hyQmSIhcypp2KN//c+d3VU/KY1EUYJDzg1EEwRuxP7Gih5/7pb8=
 =IF3G
 -----END PGP SIGNATURE-----

Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC devicetree updates from Arnd Bergmann:
 "As usual, this is the bulk of the updates for the SoC tree, adding
  more devices to existing files, addressing issues from ever improving
  automated checking, and fixing minor issues.

  The most interesting bits as usual are the new platforms. All the
  newly supported SoCs belong into existing families this time:

   - Qualcomm gets support for two newly announced platforms, both of
     which can now work in production environments: the SDX65 5G modem
     that can run a minimal Linux on its Cortex-A7 core, and the
     Snapdragon 8 Gen 1, their latest high-end phone SoC.

   - Renesas adds support for R-Car S4-8, the most recent automotive
     Server/Communication SoC.

   - TI adds support for J721s2, a new automotive SoC in the K3 family.

   - Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
     generation following their popular MT76xx series. Only basic
     support is added for now.

   - NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
     series.

   - TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
     have supported for a long time.

  New boards with the existing SoCs include

   - Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers

   - AT91/SAMA5 based evaluation board

   - NXP gains twenty new development and industrial boards for their
     i.MX and Layerscape SoCs

   - Intel IXP4xx now supports the final two machines in device tree
     that were previously only supported in old style board files.

   - Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
     MT8183 is used in the Acer Chromebook 314.

   - Qualcomm gains support for the reference machines using the two new
     SoCs, plus a number of Chromebook variants and phones based on the
     Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
     devices and the Microsoft Surface Duo 2.

   - ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.

   - Tegra now boots various older Android devices based on 32-bit chips
     out of the box, including a number of ASUS Transformer tablets.

     There is also a new Jetson AGX Orin developer kit.

   - Apple support adds the missing device trees for all the remaining
     M1 Macbook and iMac variants, though not yet the M1 Pro/Max
     versions.

   - Allwinner now supports another version of the Tanix TX6 set-top box
     based on the H6 SoC.

   - Broadcom gains support for the Netgear RAXE500 Wireless router
     based on BCM4908"

* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
  Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
  arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
  arm64: dts: qcom: sm8450-qrd: Enable USB nodes
  arm64: dts: qcom: sm8450: Add usb nodes
  ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
  dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
  ARM: dts: aspeed: add LCLK setting into LPC IBT node
  ARM: dts: aspeed: p10: Add TPM device
  ARM: dts: aspeed: p10: Enable USB host ports
  ARM: dts: aspeed: Add TYAN S8036 BMC machine
  ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
  ARM: dts: aspeed: Adding Facebook Bletchley BMC
  ARM: dts: aspeed: g220a: Enable secondary flash
  ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
  ARM: dts: aspeed: Add secure boot controller node
  dt-bindings: aspeed: Add Secure Boot Controller bindings
  ARM: dts: Remove "spidev" nodes
  dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
  dt-bindings: arm: samsung: Document E850-96 board binding
  dt-bindings: Add vendor prefix for WinLink
  ...
2022-01-10 08:24:40 -08:00
Jerome Brunet
0a62b3cc0a arm64: dts: meson: p241: add sound support
Add the p241 sound card support. This board can play audio through HDMI
and the internal DAC.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211130100159.214489-3-jbrunet@baylibre.com
2021-12-01 10:27:13 +01:00
Jerome Brunet
75fb3b1be5 arm64: dts: meson: p241: add vcc_5v regulator
Add the VCC_5V regulator, which feeds the HDMI, USB and audio amplifier.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211130100159.214489-2-jbrunet@baylibre.com
2021-12-01 10:27:13 +01:00
Vyacheslav Bocharov
c2584017f7 arm64: meson: fix dts for JetHub D1
Fix misplace of cpu_cooling_maps for JetHub D1, move it to right place.

Fixes: 8e279fb290 ("arm64: dts: meson-axg: add support for JetHub D1")
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211125130246.1086627-1-adeep@lexina.in
2021-12-01 10:25:38 +01:00
Christian Hewitt
1e9fc71213 arm64: dts: meson-gxbb-wetek: use updated LED bindings
Update the dts to use the newer style of LED bindings.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211012052522.30873-4-christianshewitt@gmail.com
2021-11-15 10:28:17 +01:00
Christian Hewitt
c019abb2fe arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
The absence of this binding appears to be harmless in Linux but it breaks
Ethernet support in mainline u-boot. So add the binding (which is present
in all other u-boot supported GXBB device-trees).

Fixes: fb72c03e0e ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211012052522.30873-3-christianshewitt@gmail.com
2021-11-15 10:28:17 +01:00
Christian Hewitt
8182a35868 arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx
node to ensure HDMI is powered in the early stages of boot.

Fixes: fb72c03e0e ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211012052522.30873-2-christianshewitt@gmail.com
2021-11-15 10:28:17 +01:00
Alexander Stein
95d35256b5 arm64: dts: amlogic: Fix SPI NOR flash node name for ODROID N2/N2+
Fix the schema warning: "spi-flash@0: $nodename:0: 'spi-flash@0' does
 not match '^flash(@.*)?$'" from jedec,spi-nor.yaml

Fixes: a084eaf309 ("arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211026182813.900775-3-alexander.stein@mailbox.org
2021-11-15 10:23:44 +01:00
Alexander Stein
bb98a6fd0b arm64: dts: amlogic: meson-g12: Fix GPU operating point table node name
Starting with commit 94274f20f6 ("dt-bindings: opp: Convert to DT
schema") the opp node name has a mandatory pattern. This change
fixes the dtbs_check warning:
gpu-opp-table: $nodename:0: 'gpu-opp-table' does not match
'^opp-table(-[a-z0-9]+)?$'
Put the 'gpu' part at the end to match the pattern.

Fixes: 916a0edc43 ("arm64: dts: amlogic: meson-g12: add the Mali OPP table and use DVFS")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211026182813.900775-2-alexander.stein@mailbox.org
2021-11-15 10:23:44 +01:00
Alexander Stein
cdc5091694 arm64: dts: amlogic: meson-g12: Fix thermal-zones indent
This node is currently at /soc/thermal-zones, but the later introduced
bindings in commit 1202a442a3 ("dt-bindings: thermal: Add yaml bindings
for thermal zones") put this at /thermal-zones.
Fix dtb_check warning by moving the thermal-zones node to /

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211026182813.900775-1-alexander.stein@mailbox.org
2021-11-15 10:23:36 +01:00
Dmitry Shmidt
83c9eee726 arm64: dts: meson-sm1-odroid: add cec nodes
Enable CEC in same way it is done for other meson odroid devices

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20211007180130.805401-1-dimitrysh@google.com
2021-11-15 10:20:03 +01:00
Anand Moon
ecff7bab5c arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio
As described in the Odroid-n2 & Odroid-n2-plus schematics,
the 5V regulator is controlled by GPIOH_8 and in Open Drain
since this GPIO doesn't support Push-Pull.

Fixes: c35f6dc5c3 ("arm64: dts: meson: Add minimal support for Odroid-N2")
Fixes: ef599f5f3e ("arm64: dts: meson: convert ODROID-N2 to dtsi")

Cc: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210920204739.950-1-linux.amoon@gmail.com
2021-09-21 09:24:14 +02:00
Anand Moon
0b26fa8a02 arm64: dts: meson-sm1: Fix the pwm regulator supply properties
After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs.
Changes help link VDDCPU pwm regulator to 12V regulator supply
instead of dummy regulator.

[   11.602281] pwm-regulator regulator-vddcpu: Looking up pwm-supply property
               in node /regulator-vddcpu failed
[   11.602344] VDDCPU: supplied by regulator-dummy
[   11.602365] regulator-dummy: could not add device link regulator.11: -ENOENT
[   11.602548] VDDCPU: 721 <--> 1022 mV at 1022 mV, enabled

Fixes: 88d537bc92 ("arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi")
Fixes: 700ab8d839 ("arm64: dts: khadas-vim3: add support for the SM1 based VIM3L")
Fixes: 3d9e764830 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Fixes: 976e920183 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-4-linux.amoon@gmail.com
2021-09-21 09:22:10 +02:00
Anand Moon
62183863f7 arm64: dts: meson-g12b: Fix the pwm regulator supply properties
After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VDDCP_A and VDDCPU_B pwm regulator to 12V regulator
supply instead of dummy regulator.

[    4.147196] VDDCPU_A: will resolve supply early: pwm
[    4.147216] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply from device tree
[    4.147227] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply property in node /regulator-vddcpu-a failed
[    4.147258] VDDCPU_A: supplied by regulator-dummy
[    4.147288] regulator-dummy: could not add device link regulator.12: -ENOENT
[    4.147353] VDDCPU_A: 721 <--> 1022 mV at 871 mV, enabled
[    4.152014] VDDCPU_B: will resolve supply early: pwm
[    4.152035] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply from device tree
[    4.152047] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply property in node /regulator-vddcpu-b failed
[    4.152079] VDDCPU_B: supplied by regulator-dummy
[    4.152108] regulator-dummy: could not add device link regulator.13: -ENOENT

Fixes: c6d29c66e5 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree")
Fixes: d14734a04a ("arm64: dts: meson-g12b-odroid-n2: enable DVFS")
Fixes: 3cb74db9b2 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi")

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-3-linux.amoon@gmail.com
2021-09-21 09:22:06 +02:00
Anand Moon
085675117e arm64: dts: meson-g12a: Fix the pwm regulator supply properties
After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs.
Changes help link VDDCPU pwm regulator to 12V regulator supply
instead of dummy regulator.

[   11.602281] pwm-regulator regulator-vddcpu: Looking up pwm-supply property
               in node /regulator-vddcpu failed
[   11.602344] VDDCPU: supplied by regulator-dummy
[   11.602365] regulator-dummy: could not add device link regulator.11: -ENOENT
[   11.602548] VDDCPU: 721 <--> 1022 mV at 1022 mV, enabled

Fixes: e9bc0765cc ("arm64: dts: meson-g12a: enable DVFS on G12A boards")

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-2-linux.amoon@gmail.com
2021-09-21 09:21:53 +02:00
Christian Hewitt
9450f63ba4 arm64: dts: meson: add audio playback to rbox-pro
Add initial support limited to HDMI i2s and SPDIF (LPCM).

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210914151631.2841-1-christianshewitt@gmail.com
2021-09-17 09:31:50 +02:00
Vyacheslav Bocharov
8e279fb290 arm64: dts: meson-axg: add support for JetHub D1
JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation
controller with the following features:
- DIN Rail Mounting
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 512Mb/1GB LPDDR4
- 8/16GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac,
  Bluetooth 4.2.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power
  and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Passive POE

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: added missing newline in DT and removed changelog from commit msg]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210915085715.1134940-5-adeep@lexina.in
2021-09-17 09:25:12 +02:00
Vyacheslav Bocharov
abfaae24ec arm64: dts: meson-gxl: add support for JetHub H1
JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation
controller with the following features:

- square plastic case
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1GB LPDDR4
- 8/16GB eMMC flash
- 2 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power
  and Zigbee 3.0 support.
- MicroSD 2.x/3.x/4.x DS/HS cards.
- 1 x gpio LED
- ADC user Button
- DC source 5V microUSB

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210915085715.1134940-4-adeep@lexina.in
2021-09-17 09:23:48 +02:00
Christian Hewitt
26d1400f74 arm64: dts: amlogic: add support for Radxa Zero
Radxa Zero is a small form factor SBC based on the Amlogic S905Y2
chipset that ships in a number of RAM/eMMC configurations:

Boards with 512MB/1GB LPDDR4 RAM have no eMMC storage and BCM43436
wireless (2.4GHz b/g/n) while 2GB/4GB boards have 8/16/32/64/128GB
eMMC storage and BCM4345 wireless (2.4/5GHz a/b/g/n/ac).

- Amlogic S905Y2 quad-core Cortex-A53
- Mali G31-MP2 GPU
- HDMI 2.1 output (micro)
- 1x USB 2.0 port - Type C (OTG)
- 1x USB 3.0 port - Type C (Host)
- 1x micro SD Card slot
- 40 Pin GPIO header

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210909102154.22710-3-christianshewitt@gmail.com
2021-09-13 09:50:30 +02:00
Dongjin Kim
9d02214f83 arm64: dts: meson: sm1: add Ethernet PHY reset line for ODROID-C4/HC4
This patch is to fix an issue that the ethernet link doesn't come up
when using ip link set down/up:
   [   11.428114] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
   [   14.428595] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
   [   14.428610] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
   [   14.428974] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
   [   14.711185] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed

This fix refers to two commits applied for ODROID-N2 (G12B).
    commit 658e4129bb ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
    commit 1c7412530d ("arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements")

Fixes: 88d537bc92 ("arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi")
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: added fixes tag and typo in commit log]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YScKYFWlYymgGw3l@anyang-linuxfactory-or-kr
2021-09-13 09:45:53 +02:00
Christian Hewitt
c6cf488e3b arm64: dts: meson: add audio playback to vega-s95 dtsi
Add initial support limited to HDMI i2s and SPDIF (LPCM).

Tested-by: Oleg Ivanov <150balbes@yandex.ru>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210804140258.4666-1-christianshewitt@gmail.com
2021-08-10 09:57:05 +02:00
Christian Hewitt
c7f5675b34 arm64: dts: meson: add audio playback to nexbox-a1
Add initial support limited to HDMI i2s and SPDIF (LPCM).

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210804140029.4445-1-christianshewitt@gmail.com
2021-08-10 09:56:54 +02:00
Artem Lapkin
4b5260032e arm64: dts: meson: improve gxm-khadas-vim2 wifi
Improve gxm-khadas-vim2 wifi performance
* change freq from 60Mhz to 100Mhz
* add cap-sd-highspeed param

100Mhz works well same as in meson-khadas-vim3.dtsi

Signed-off-by: Artem Lapkin <art@khadas.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210622044334.769791-2-art@khadas.com
2021-07-26 10:08:16 +02:00
Artem Lapkin
6b197abe56 arm64: dts: meson: improve gxl-s905x-khadas-vim wifi
Improve gxl-s905x-khadas-vim wifi performance
* change freq from 60Mhz to 100Mhz

100Mhz works well same as in meson-khadas-vim3.dtsi

Signed-off-by: Artem Lapkin <art@khadas.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210622044334.769791-1-art@khadas.com
2021-07-26 10:08:16 +02:00
Chen-Yu Tsai
46f2735c17 arm64: dts: meson-gxbb: nanopi-k2: Enable Bluetooth
The NanoPi K2 has a AP6212 WiFi+BT combo module. The WiFi portion is
already enabled. The BT part is connected via UART and I2S.

Enable the UART and add a device node describing the Bluetooth portion
of the module.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210712135919.32059-1-wens@kernel.org
2021-07-26 09:58:49 +02:00
Neil Armstrong
303d2af21a arm64: dts: meson-sm1-odroid-c4: remove invalid hub_5v regulator
Drop the hub_5v regulator which controls the HUB Reset line with GPIOH_4 which
is already controlled by a GPIO HOG.

Until we can properly describe how to control USB HUBs reset lines, keeping
the GPIO HOG is an acceptable solution we use on multiple boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-8-narmstrong@baylibre.com
2021-06-14 09:57:45 +02:00
Christian Hewitt
7178f340e9 arm64: dts: meson-sm1-odroid-hc4: add spifc node to ODROID-HC4
Add a node for the XT25F128B SPI-NOR flash to make it accessible
from Linux.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-7-narmstrong@baylibre.com
2021-06-14 09:57:45 +02:00
Neil Armstrong
164147f094 arm64: dts: meson-sm1-odroid-hc4: add regulators controlled by GPIOH_8
As described in the HC4 schematics, GPIOH_8 controls the USB 5V and 12V
regulators used to power the SATA drives.

And is set as Open Drain since this GPIO doesn't support Push-Pull.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-6-narmstrong@baylibre.com
2021-06-14 09:57:45 +02:00
Neil Armstrong
703e84d661 arm64: dts: meson-sm1-odroid-hc4: disable unused USB PHY0
As described in the HC4 schematics, only the USB port B is used,
port A is left unconnected. Thus disable PHY0 and remove it from PHYs list.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-5-narmstrong@baylibre.com
2021-06-14 09:57:45 +02:00
Neil Armstrong
45d736ab17 arm64: dts: meson-sm1-odroid: add 5v regulator gpio
As described in the Odroid-C4 & Odroid-HC4 schematics, the 5V regulator is controlled
by GPIOH_8 and in Open Drain since this GPIO doesn't support Push-Pull.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-4-narmstrong@baylibre.com
2021-06-14 09:57:45 +02:00
Neil Armstrong
7881df5136 arm64: dts: meson-sm1-odroid: set tf_io regulator gpio as open source
According to Odroid-C4 & HC4 Schematics, the TF_3V3N_1V8_EN can be in Hi-Z for 3v3,
and since it's the default GPIOAO_6 mode at reset, let switch this GPIO as Open-Source
to drive for 1, and input for 0.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-3-narmstrong@baylibre.com
2021-06-14 09:57:45 +02:00
Neil Armstrong
1f80a5cf74 arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator
As described in the schematics of Odroid-C4 and Odroid-HC4, the TF_IO regulator
is enabled by the GPIOE_2 GPIO and gets it's supply from VCC_5V.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210607065435.577334-2-narmstrong@baylibre.com
2021-06-14 09:57:45 +02:00
Neil Armstrong
a270a2b24d arm64: dts: meson: set 128bytes FIFO size on uart A
The first UART controller in "Everything-Else" power domain, usually used
for Bluetooth HCI has 128bytes FIFO depth.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210518075833.3736038-4-narmstrong@baylibre.com
2021-06-01 10:27:02 +02:00
Neil Armstrong
976e920183 arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts
Banana Pi BPI-M5 is a credit card format SBC with the following features:
- Amlogic S905X3 quad core Cortex-A55
- Mali-G31 GPU
- 4GB LPDDR4
- 16GB eMMC flash
- 4 USB 3.0
- 1 GbE ethernet
- HDMI output
- 2x LEDS
- SDCard
- 2.5mm Jack with Stereo Audio + CVBS
- Infrared Received
- ADC Button
- GPIO Button
- 40 pins header + 3pins debug header

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210514143255.3352774-4-narmstrong@baylibre.com
2021-05-28 10:00:43 +02:00
Neil Armstrong
ddbdaa4d59 arm64: dts: meson-sm1: add toacodec node
Add toacodec node for Amlogic SM1 SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210514143255.3352774-2-narmstrong@baylibre.com
2021-05-28 10:00:43 +02:00
Jerome Brunet
43ffb52862 arm64: dts: meson: vim3: enable hdmi audio loopback
Enable audio capture frontends and a tdm decoder.
This makes it possible to loopback the audio played on the hdmi codec,
which is the only output interface at the moment.

Of course, one TODDR device would be enough to do that but since
the 3 FRDDRs are enabled on the playback side, let's do the same on the
capture side.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210429084253.59692-1-jbrunet@baylibre.com
2021-05-28 09:46:31 +02:00
Kevin Hilman
d9421d6c52 arm64: dts: amlogic: misc DT schema fixups
Take a pass at cleaning up a bunch of warnings
from 'make dtbs_check' that have crept in.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210421204833.18523-1-khilman@baylibre.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-22 23:19:46 +02:00
Hyeonki Hong
412c8fa8c3 arm64: dts: meson: add GPIO line names to ODROID N2/N2+
Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.

Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-4-christianshewitt@gmail.com
2021-04-07 09:18:41 -07:00
Hyeonki Hong
cfa303d99e arm64: dts: meson: add saradc node to ODROID N2/N2+
Add the meson saradc node to the ODROID N2/N2+ common dtsi.

Signed-off-by: Hyeonki Hong <hhk7734@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-3-christianshewitt@gmail.com
2021-04-07 09:18:40 -07:00
Christian Hewitt
7d9158bcb3 arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node
Remove an extra tab from the ext_mdio node in the ODROID N2/N2+ common
dtsi file.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210407042609.9736-2-christianshewitt@gmail.com
2021-04-07 09:18:40 -07:00
Christian Hewitt
727d93ed3b arm64: dts: meson: add initial device-tree for MeCool KIII Pro
MeCool (Videostrong) KIII Pro is based on the Amlogic Q200 reference
board with an S912 chip and the following specs:

- 3GB DDR3 RAM
- 16GB eMMC
- 10/100/1000 Base-T Ethernet
- BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0)
- DVB-C/T/T2/S/S2 (AVL6862TA demod + R912 tuner)
- HDMI 2.0a video
- S/PDIF optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x Update/Reset button (underside)
- 1x micro SD card slot

Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210402064521.30579-4-christianshewitt@gmail.com
2021-04-05 15:35:39 -07:00
Christian Hewitt
d5454e7ce2 arm64: dts: meson: add initial device-tree for MeCool KII Pro
MeCool (Videostrong) KII Pro is based on the Amlogic P230 reference
board with an S905D chip and the following specs:

- 2GB DDR3 RAM
- 16GB eMMC
- 10/100 Base-T Ethernet
- BCM4335 Wireless (802.11 b/g/n/ac, BT 4.0)
- DVB-C/T/T2/S/S2 (AVL6862TA demod + R848 tuner)
- HDMI 2.0a video
- S/PDIF optical output
- CVBS/Analogue output
- 4x USB 2.0 ports
- IR receiver
- 1x Power button (with integrated blue LED)
- 1x micro SD card slot

Tested-by: Drazen Spio <drazsp@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210402064521.30579-3-christianshewitt@gmail.com
2021-04-05 15:35:39 -07:00
Alexander Stein
ab547c4fb3 arm64: dts: amlogic: Assign a fixed index to mmc devices
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs
are not practical. Use newly introduced aliases for mmcblk devices from [1].
[1]
https://patchwork.kernel.org/patch/11747669/

Commit message taken from commit 0011c6d182 ("arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.")

The unconventional order (B, C, A) is due to the fact that sd_emmc_a is
(according to the comments) only used for SDIO.

AFAICS all boards either have both sd_emmc_b and sd_emmc_c or only one of
them enabled. So the alias order should match the previous non-async order
for all of them.

Signed-off-by: Alexander Stein <alexander.stein@mailbox.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210203192824.854491-1-alexander.stein@mailbox.org
2021-03-31 14:40:38 -07:00
Christian Hewitt
0e9fed92c6 arm64: dts: meson: add initial device-tree for Minix NEO U9-H
Minix NEO U9-H is based on the Amlogic Q200 reference board with an
S912-H chip and the following specs:

- 2GB DDR3 RAM
- 16GB eMMC
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- RTC chip
- HDMI 2.1 video
- S/PDIF optical output
- ES8323 audio codec
- Analogue headphone output
- 3x USB 2.0 ports (1x OTG)
- IR receiver
- 1x Power LED (white)
- 1x Power button (rear)
- 1x Update/Reset button (underside)
- 1x micro SD card slot

Tested-by: Wes Bradley <komplex@live.ie>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210201210508.1528-2-christianshewitt@gmail.com
2021-03-08 09:28:08 -08:00
Christian Hewitt
33b14f663d arm64: dts: meson: add initial device-tree for ODROID-HC4
ODROID-HC4 is a derivative of the C4 with minor differences:

- 16MB XT25F128B SPI-NOR flash
- 2x SATA ports via ASM1061 PCIe to SATA controller
- 7-pin header with SPI and I2C for 1-inch OLED display and RTC
- 1x USB 2.0 host port

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-6-christianshewitt@gmail.com
2021-02-08 09:03:30 -08:00
Christian Hewitt
88d537bc92 arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi
Convert the ODROID-C4 dts to meson-sm1-odroid.dtsi and C4 board dts in
preparation for adding additional C4 family boards.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-4-christianshewitt@gmail.com
2021-02-08 09:03:09 -08:00
Christian Hewitt
fd88408951 arm64: dts: meson: sort Amlogic dtb Makefile
Sort the Makefile before adding new SM1 devices.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-3-christianshewitt@gmail.com
2021-02-03 10:22:11 -08:00
Artem Lapkin
39be8f441f arm64: dts: meson: fix broken wifi node for Khadas VIM3L
move &sd_emmc_a ... from /* */ commented area, because cant load wifi fw
without sd-uhs-sdr50 option on VIM3L

[   11.686590] brcmfmac: brcmf_chip_cores_check: CPU core not detected
[   11.696382] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed!
[   11.706240] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed
[   11.715890] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19...
[   13.718424] brcmfmac: brcmf_chip_recognition: chip backplane type 15 is not supported

Signed-off-by: Artem Lapkin <art@khadas.com>
Fixes: f1bb924e8f ("arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210129085041.1408540-1-art@khadas.com
2021-02-03 10:22:10 -08:00
Christian Hewitt
6fb82afbe2 arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to ODROID-N2 dtsi
Enable the onboard pcf8563 rtc hardware on ODROID N2/N2+ boards via the
common dtsi. Also add aliases to ensure vrtc does not claim /dev/rtc0.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210111135831.2218-1-christianshewitt@gmail.com
2021-02-03 10:22:10 -08:00
Christian Hewitt
933b80eda0 arm64: dts: meson: shorten audio card names for alsa compatibility
This patch shortens all audio card model names by dropping the SoC prefix
(for conformity) and rewording those that are still longer than alsa's 15
character name limit [0] to avoid userspace config issues.

[0] https://github.com/torvalds/linux/blob/master/Documentation/sound/alsa-configuration.rst#common-parameters-for-top-sound-card-modules

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210101063737.26635-1-christianshewitt@gmail.com
2021-02-03 10:22:09 -08:00