SME introduces streaming SVE mode in which FFR is not present and the
instructions for accessing it UNDEF. In preparation for handling this
update the low level SVE state access functions to take a flag specifying
if FFR should be handled. When saving the register state we store a zero
for FFR to guard against uninitialized data being read. No behaviour change
should be introduced by this patch.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211019172247.3045838-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Following optimisations of the SVE register handling we no longer load the
SVE state from a saved copy of the FPSIMD registers, we convert directly
in registers or from one saved state to another. Remove the function so we
don't need to update it during further refactoring.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211019172247.3045838-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently all the active code in fpsimd_save() is inside a check for
TIF_FOREIGN_FPSTATE. Reduce the indentation level by changing to return
from the function if TIF_FOREIGN_FPSTATE is set.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211019172247.3045838-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Replace the open coded parsing of CPU nodes' 'reg' property with
of_get_cpu_hwid().
This change drops an error message for missing 'reg' property, but that
should not be necessary as the DT tools will ensure 'reg' is present.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20211006164332.1981454-5-robh@kernel.org
Since userspace can make use of the CNTVSS_EL0 instruction, expose
it via a HWCAP.
Suggested-by: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-18-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Since CNTVCTSS obey the same control bits as CNTVCT, add the necessary
decoding to the hook table. Note that there is no known user of
this at the moment.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-17-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a new capability to detect the Enhanced Counter Virtualization
feature (FEAT_ECV).
Reviewed-by: Oliver Upton <oupton@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211017124225.3018098-15-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Both ACPI and DT provide the ability to describe additional layers of
topology between that of individual cores and higher level constructs
such as the level at which the last level cache is shared.
In ACPI this can be represented in PPTT as a Processor Hierarchy
Node Structure [1] that is the parent of the CPU cores and in turn
has a parent Processor Hierarchy Nodes Structure representing
a higher level of topology.
For example Kunpeng 920 has 6 or 8 clusters in each NUMA node, and each
cluster has 4 cpus. All clusters share L3 cache data, but each cluster
has local L3 tag. On the other hand, each clusters will share some
internal system bus.
+-----------------------------------+ +---------+
| +------+ +------+ +--------------------------+ |
| | CPU0 | | cpu1 | | +-----------+ | |
| +------+ +------+ | | | | |
| +----+ L3 | | |
| +------+ +------+ cluster | | tag | | |
| | CPU2 | | CPU3 | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +----+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | L3 |
| data |
+-----------------------------------+ | |
| +------+ +------+ | +-----------+ | |
| | | | | | | | | |
| +------+ +------+ +----+ L3 | | |
| | | tag | | |
| +------+ +------+ | | | | |
| | | | | | +-----------+ | |
| +------+ +------+ +--------------------------+ |
+-----------------------------------| | |
+-----------------------------------| | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| +----+ L3 | | |
| +------+ +------+ | | tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +---+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | | |
+-----------------------------------+ | |
+-----------------------------------+ | |
| +------+ +------+ +--------------------------+ |
| | | | | | +-----------+ | |
| +------+ +------+ | | | | |
| | | L3 | | |
| +------+ +------+ +--+ tag | | |
| | | | | | | | | |
| +------+ +------+ | +-----------+ | |
| | +---------+
+-----------------------------------+
That means spreading tasks among clusters will bring more bandwidth
while packing tasks within one cluster will lead to smaller cache
synchronization latency. So both kernel and userspace will have
a chance to leverage this topology to deploy tasks accordingly to
achieve either smaller cache latency within one cluster or an even
distribution of load among clusters for higher throughput.
This patch exposes cluster topology to both kernel and userspace.
Libraried like hwloc will know cluster by cluster_cpus and related
sysfs attributes. PoC of HWLOC support at [2].
Note this patch only handle the ACPI case.
Special consideration is needed for SMT processors, where it is
necessary to move 2 levels up the hierarchy from the leaf nodes
(thus skipping the processor core level).
Note that arm64 / ACPI does not provide any means of identifying
a die level in the topology but that may be unrelate to the cluster
level.
[1] ACPI Specification 6.3 - section 5.2.29.1 processor hierarchy node
structure (Type 0)
[2] https://github.com/hisilicon/hwloc/tree/linux-cluster
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210924085104.44806-2-21cnbao@gmail.com
Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm]
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
When pKVM is enabled, the hypervisor code at EL2 and its data structures
are inaccessible to the host kernel and cannot be torn down or replaced
as this would defeat the integrity properies which pKVM aims to provide.
Furthermore, the ABI between the host and EL2 is flexible and private to
whatever the current implementation of KVM requires and so booting a new
kernel with an old EL2 component is very likely to end in disaster.
In preparation for uninstalling the hyp stub calls which are relied upon
to reset EL2, disable kexec and hibernation in the host when protected
KVM is enabled.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211008135839.1193-3-will@kernel.org
Most of ARCHs use empty ftrace_dyn_arch_init(), introduce a weak common
ftrace_dyn_arch_init() to cleanup them.
Link: https://lkml.kernel.org/r/20210909090216.1955240-1-o451686892@gmail.com
Acked-by: Heiko Carstens <hca@linux.ibm.com> (s390)
Acked-by: Helge Deller <deller@gmx.de> (parisc)
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
MTE provides an asymmetric mode for detecting tag exceptions. In
particular, when such a mode is present, the CPU triggers a fault
on a tag mismatch during a load operation and asynchronously updates
a register when a tag mismatch is detected during a store operation.
Add support for MTE asymmetric mode.
Note: If the CPU does not support MTE asymmetric mode the kernel falls
back on synchronous mode which is the default for kasan=on.
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20211006154751.4463-5-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the cpufeature entries to detect the presence of Asymmetric MTE.
Note: The tag checking mode is initialized via cpu_enable_mte() ->
kasan_init_hw_tags() hence to enable it we require asymmetric mode
to be at least on the boot CPU. If the boot CPU does not have it, it is
fine for late CPUs to have it as long as the feature is not enabled
(ARM64_CPUCAP_BOOT_CPU_FEATURE).
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20211006154751.4463-4-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
This header contains only cpu_soft_restart() which is never used directly
anymore. So, remove this header, and rename the helper to be
cpu_soft_restart().
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-15-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Now that kexec does its relocations with the MMU enabled, we no longer
need to clean the relocation data to the PoC.
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-14-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Now, that we have linear map page tables configured, keep MMU enabled
to allow faster relocation of segments to final destination.
Cavium ThunderX2:
Kernel Image size: 38M Iniramfs size: 46M Total relocation size: 84M
MMU-disabled:
relocation 7.489539915s
MMU-enabled:
relocation 0.03946095s
Broadcom Stingray:
The performance data: for a moderate size kernel + initramfs: 25M the
relocation was taking 0.382s, with enabled MMU it now takes
0.019s only or x20 improvement.
The time is proportional to the size of relocation, therefore if initramfs
is larger, 100M it could take over a second.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-13-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
To perform the kexec relocation with the MMU enabled, we need a copy
of the linear map.
Create one, and install it from the relocation code. This has to be done
from the assembly code as it will be idmapped with TTBR0. The kernel
runs in TTRB1, so can't use the break-before-make sequence on the mapping
it is executing from.
The makes no difference yet as the relocation code runs with the MMU
disabled.
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-12-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, relocation code declares start and end variables
which are used to compute its size.
The better way to do this is to use ld script, and put relocation
function in its own section.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-11-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Since we are going to keep MMU enabled during relocation, we need to
keep EL1 mode throughout the relocation.
Keep EL1 enabled, and switch EL2 only before entering the new world.
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-10-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
If we have a EL2 mode without VHE, the EL2 vectors are needed in order
to switch to EL2 and jump to new world with hypervisor privileges.
In preparation to MMU enabled relocation, configure our EL2 table now.
Kexec uses #HVC_SOFT_RESTART to branch to the new world, so extend
el1_sync vector that is provided by trans_pgd_copy_el2_vectors() to
support this case.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-9-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, kexec relocation function (arm64_relocate_new_kernel) accepts
the following arguments:
head: start of array that contains relocation information.
entry: entry point for new kernel or purgatory.
dtb_mem: first and only argument to entry.
The number of arguments cannot be easily expended, because this
function is also called from HVC_SOFT_RESTART, which preserves only
three arguments. And, also arm64_relocate_new_kernel is written in
assembly but called without stack, thus no place to move extra arguments
to free registers.
Soon, we will need to pass more arguments: once we enable MMU we
will need to pass information about page tables.
Pass kimage to arm64_relocate_new_kernel, and teach it to get the
required fields from kimage.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-8-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
kexec does dcache maintenance when it re-writes all memory. Our
dcache_by_line_op macro depends on reading the sanitized DminLine
from memory. Kexec may have overwritten this, so open-codes the
sequence.
dcache_by_line_op is a whole set of macros, it uses dcache_line_size
which uses read_ctr for the sanitsed DminLine. Reading the DminLine
is the first thing the dcache_by_line_op does.
Rename dcache_by_line_op dcache_by_myline_op and take DminLine as
an argument. Kexec can now use the slightly smaller macro.
This makes up-coming changes to the dcache maintenance easier on
the eye.
Code generated by the existing callers is unchanged.
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-7-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
In case of kdump or when segments are already in place the relocation
is not needed, therefore the setup of relocation function and call to
it can be skipped.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Suggested-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-6-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, during kexec load we are copying relocation function and
flushing it. However, we can also flush kexec relocation buffers and
if new kernel image is already in place (i.e. crash kernel), we can
also flush the new kernel image itself.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-5-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently, only hibernate sets custom ttbr0 with safe idmaped function.
Kexec, is also going to be using this functionality when relocation code
is going to be idmapped.
Move the setup sequence to a dedicated cpu_install_ttbr0() for custom
ttbr0.
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-4-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Users of trans_pgd may also need a copy of vector table because it is
also may be overwritten if a linear map can be overwritten.
Move setup of EL2 vectors from hibernate to trans_pgd, so it can be
later shared with kexec as well.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-3-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Replace places that contain logic like this:
is_hyp_mode_available() && !is_kernel_in_hyp_mode()
With a dedicated boolean function is_hyp_nvhe(). This will be needed
later in kexec in order to sooner switch back to EL2.
Suggested-by: James Morse <james.morse@arm.com>
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210930143113.1502553-2-pasha.tatashin@soleen.com
Signed-off-by: Will Deacon <will@kernel.org>
Since now there is kretprobe_trampoline_addr() for referring the
address of kretprobe trampoline code, we don't need to access
kretprobe_trampoline directly.
Make it harder to refer by renaming it to __kretprobe_trampoline().
Link: https://lkml.kernel.org/r/163163045446.489837.14510577516938803097.stgit@devnote2
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The __kretprobe_trampoline_handler() callback, called from low level
arch kprobes methods, has the 'trampoline_address' parameter, which is
entirely superfluous as it basically just replicates:
dereference_kernel_function_descriptor(kretprobe_trampoline)
In fact we had bugs in arch code where it wasn't replicated correctly.
So remove this superfluous parameter and use kretprobe_trampoline_addr()
instead.
Link: https://lkml.kernel.org/r/163163044546.489837.13505751885476015002.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This clean up the error/notification messages in kprobes related code.
Basically this defines 'pr_fmt()' macros for each files and update
the messages which describes
- what happened,
- what is the kernel going to do or not do,
- is the kernel fine,
- what can the user do about it.
Also, if the message is not needed (e.g. the function returns unique
error code, or other error message is already shown.) remove it,
and replace the message with WARN_*() macros if suitable.
Link: https://lkml.kernel.org/r/163163036568.489837.14085396178727185469.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
THREAD_INFO_IN_TASK moved the CPU field out of thread_info, but this
causes some issues on architectures that define raw_smp_processor_id()
in terms of this field, due to the fact that #include'ing linux/sched.h
to get at struct task_struct is problematic in terms of circular
dependencies.
Given that thread_info and task_struct are the same data structure
anyway when THREAD_INFO_IN_TASK=y, let's move it back so that having
access to the type definition of struct thread_info is sufficient to
reference the CPU number of the current task.
Note that this requires THREAD_INFO_IN_TASK's definition of the
task_thread_info() helper to be updated, as task_cpu() takes a
pointer-to-const, whereas task_thread_info() (which is used to generate
lvalues as well), needs a non-const pointer. So make it a macro instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
The CPU field will be moved back into thread_info even when
THREAD_INFO_IN_TASK is enabled, so add it back to arm64's definition of
struct thread_info.
Note that arm64 always has CONFIG_SMP=y so there is no point in guarding
the CPU field with an #ifdef.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
It is not necessary to write to GCR_EL1 on every kernel entry and
exit when HW tag-based KASAN is disabled because the kernel will not
execute any IRG instructions in that mode. Since accessing GCR_EL1
can be expensive on some microarchitectures, avoid doing so by moving
the access to task switch when HW tag-based KASAN is disabled.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://linux-review.googlesource.com/id/I78e90d60612a94c24344526f476ac4ff216e10d2
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210924010655.2886918-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Annotating a pointer from kernel to __user and then back again requires
an extra __force annotation to silent sparse warning. In call_undef_hook()
this unnecessary complexity can be avoided by modifying the intermediate
user pointer to unsigned long.
This way there is no inter-changeable use of user and kernel pointers
and the code is consistent.
Note: This patch adds no functional changes to code.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210917055811.22341-1-amit.kachhap@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Revert a recent commit related to memory management that turned out
to be problematic (Jia He).
-----BEGIN PGP SIGNATURE-----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=F6sF
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a recent commit related to memory management that turned out to
be problematic (Jia He)"
* tag 'acpi-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: Add memory semantics to acpi_os_map_memory()"
- It turns out that the optimised string routines merged in 5.14 are not
safe with in-kernel MTE (KASAN_HW_TAGS) because of reading beyond the
end of a string (strcmp, strncmp). Such reading may go across a 16
byte tag granule and cause a tag check fault. When KASAN_HW_TAGS is
enabled, use the generic strcmp/strncmp C implementation.
- An errata workaround for ThunderX relied on the CPU capabilities being
enabled in a specific order. This disappeared with the automatic
generation of the cpucaps.h file (sorted alphabetically). Fix it by
checking the current CPU only rather than the system-wide capability.
- Add system_supports_mte() checks on the kernel entry/exit path and
thread switching to avoid unnecessary barriers and function calls on
systems where MTE is not supported.
- kselftests: skip arm64 tests if the required features are missing.
-----BEGIN PGP SIGNATURE-----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=JIq+
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- It turns out that the optimised string routines merged in 5.14 are
not safe with in-kernel MTE (KASAN_HW_TAGS) because of reading beyond
the end of a string (strcmp, strncmp). Such reading may go across a
16 byte tag granule and cause a tag check fault. When KASAN_HW_TAGS
is enabled, use the generic strcmp/strncmp C implementation.
- An errata workaround for ThunderX relied on the CPU capabilities
being enabled in a specific order. This disappeared with the
automatic generation of the cpucaps.h file (sorted alphabetically).
Fix it by checking the current CPU only rather than the system-wide
capability.
- Add system_supports_mte() checks on the kernel entry/exit path and
thread switching to avoid unnecessary barriers and function calls on
systems where MTE is not supported.
- kselftests: skip arm64 tests if the required features are missing.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Restore forced disabling of KPTI on ThunderX
kselftest/arm64: signal: Skip tests if required features are missing
arm64: Mitigate MTE issues with str{n}cmp()
arm64: add MTE supported check to thread switching and syscall entry/exit
This reverts commit 437b38c511.
The memory semantics added in commit 437b38c511 causes SystemMemory
Operation region, whose address range is not described in the EFI memory
map to be mapped as NormalNC memory on arm64 platforms (through
acpi_os_map_memory() in acpi_ex_system_memory_space_handler()).
This triggers the following abort on an ARM64 Ampere eMAG machine,
because presumably the physical address range area backing the Opregion
does not support NormalNC memory attributes driven on the bus.
Internal error: synchronous external abort: 96000410 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+ #462
Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 0.14 02/22/2019
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[...snip...]
Call trace:
acpi_ex_system_memory_space_handler+0x26c/0x2c8
acpi_ev_address_space_dispatch+0x228/0x2c4
acpi_ex_access_region+0x114/0x268
acpi_ex_field_datum_io+0x128/0x1b8
acpi_ex_extract_from_field+0x14c/0x2ac
acpi_ex_read_data_from_field+0x190/0x1b8
acpi_ex_resolve_node_to_value+0x1ec/0x288
acpi_ex_resolve_to_value+0x250/0x274
acpi_ds_evaluate_name_path+0xac/0x124
acpi_ds_exec_end_op+0x90/0x410
acpi_ps_parse_loop+0x4ac/0x5d8
acpi_ps_parse_aml+0xe0/0x2c8
acpi_ps_execute_method+0x19c/0x1ac
acpi_ns_evaluate+0x1f8/0x26c
acpi_ns_init_one_device+0x104/0x140
acpi_ns_walk_namespace+0x158/0x1d0
acpi_ns_initialize_devices+0x194/0x218
acpi_initialize_objects+0x48/0x50
acpi_init+0xe0/0x498
If the Opregion address range is not present in the EFI memory map there
is no way for us to determine the memory attributes to use to map it -
defaulting to NormalNC does not work (and it is not correct on a memory
region that may have read side-effects) and therefore commit
437b38c511 should be reverted, which means reverting back to the
original behavior whereby address ranges that are mapped using
acpi_os_map_memory() default to the safe devicenGnRnE attributes on
ARM64 if the mapped address range is not defined in the EFI memory map.
Fixes: 437b38c511 ("ACPI: Add memory semantics to acpi_os_map_memory()")
Signed-off-by: Jia He <justin.he@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A noted side-effect of commit 0c6c2d3615 ("arm64: Generate cpucaps.h")
is that cpucaps are now sorted, changing the enumeration order. This
assumed no dependencies between cpucaps, which turned out not to be true
in one case. UNMAP_KERNEL_AT_EL0 currently needs to be processed after
WORKAROUND_CAVIUM_27456. ThunderX systems are incompatible with KPTI, so
unmap_kernel_at_el0() bails if WORKAROUND_CAVIUM_27456 is set. But because
of the sorting, WORKAROUND_CAVIUM_27456 will not yet have been considered
when unmap_kernel_at_el0() checks for it, so the kernel tries to
run w/ KPTI - and quickly falls over.
Because all ThunderX implementations have homogeneous CPUs, we can remove
this dependency by just checking the current CPU for the erratum.
Fixes: 0c6c2d3615 ("arm64: Generate cpucaps.h")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210923145002.3394558-1-dann.frazier@canonical.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Invoke rseq_handle_notify_resume() from tracehook_notify_resume() now
that the two function are always called back-to-back by architectures
that have rseq. The rseq helper is stubbed out for architectures that
don't support rseq, i.e. this is a nop across the board.
Note, tracehook_notify_resume() is horribly named and arguably does not
belong in tracehook.h as literally every line of code in it has nothing
to do with tracing. But, that's been true since commit a42c6ded82
("move key_repace_session_keyring() into tracehook_notify_resume()")
first usurped tracehook_notify_resume() back in 2012. Punt cleaning that
mess up to future patches.
No functional change intended.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This lets us avoid doing unnecessary work on hardware that does not
support MTE, and will allow us to freely use MTE instructions in the
code called by mte_thread_switch().
Since this would mean that we do a redundant check in
mte_check_tfsr_el1(), remove it and add two checks now required in its
callers. This also avoids an unnecessary DSB+ISB sequence on the syscall
exit path for hardware not supporting MTE.
Fixes: 65812c6921 ("arm64: mte: Enable async tag check fault")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I02fd000d1ef2c86c7d2952a7f099b254ec227a5d
Link: https://lore.kernel.org/r/20210915190336.398390-1-pcc@google.com
[catalin.marinas@arm.com: adjust the commit log slightly]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
__stack_chk_guard is setup once while init stage and never changed
after that.
Although the modification of this variable at runtime will usually
cause the kernel to crash (so does the attacker), it should be marked
as __ro_after_init, and it should not affect performance if it is
placed in the ro_after_init section.
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Remove all but the first include of linux/sched.h from process.c
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210902011126.29828-1-lv.ruyi@zte.com.cn
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we need a buffer for SVE register state we call sve_alloc() to make
sure that one is there. In order to avoid repeated allocations and frees
we keep the buffer around unless we change vector length and just memset()
it to ensure a clean register state. The function that deals with this
takes the task to operate on as an argument, however in the case where we
do a memset() we initialise using the SVE state size for the current task
rather than the task passed as an argument.
This is only an issue in the case where we are setting the register state
for a task via ptrace and the task being configured has a different vector
length to the task tracing it. In the case where the buffer is larger in
the traced process we will leak old state from the traced process to
itself, in the case where the buffer is smaller in the traced process we
will overflow the buffer and corrupt memory.
Fixes: bc0ee47603 ("arm64/sve: Core task context handling")
Cc: <stable@vger.kernel.org> # 4.15.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210909165356.10675-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be removed.
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as they
do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is disabled
- bugfixes and cleanups, especially with respect to 1) vCPU reset and
2) choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmE2CIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMyqwf+Ky2WoThuQ9Ra0r/m8pUTAx5+gsAf
MmG24rNLE+26X0xuBT9Q5+etYYRLrRTWJvo5cgHooz7muAYW6scR+ho5xzvLTAxi
DAuoijkXsSdGoFCp0OMUHiwG3cgY5N7feTEwLPAb2i6xr/l6SZyCP4zcwiiQbJ2s
UUD0i3rEoNQ02/hOEveud/ENxzUli9cmmgHKXR3kNgsJClSf1fcuLnhg+7EGMhK9
+c2V+hde5y0gmEairQWm22MLMRolNZ5NL4kjykiNh2M5q9YvbHe5+f/JmENlNZMT
bsUQT6Ry1ukuJ0V59rZvUw71KknPFzZ3d6HgW4pwytMq6EJKiISHzRbVnQ==
=FCAB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual
PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
s390:
- enable interpretation of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup
x86:
- fast (lockless) page fault support for the new MMU
- new MMU now the default
- increased maximum allowed VCPU count
- allow inhibit IRQs on KVM_RUN while debugging guests
- let Hyper-V-enabled guests run with virtualized LAPIC as long as
they do not enable the Hyper-V "AutoEOI" feature
- fixes and optimizations for the toggling of AMD AVIC (virtualized
LAPIC)
- tuning for the case when two-dimensional paging (EPT/NPT) is
disabled
- bugfixes and cleanups, especially with respect to vCPU reset and
choosing a paging mode based on CR0/CR4/EFER
- support for 5-level page table on AMD processors
Generic:
- MMU notifier invalidation callbacks do not take mmu_lock unless
necessary
- improved caching of LRU kvm_memory_slot
- support for histogram statistics
- add statistics for halt polling and remote TLB flush requests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (210 commits)
KVM: Drop unused kvm_dirty_gfn_invalid()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: MMU: mark role_regs and role accessors as maybe unused
KVM: MIPS: Remove a "set but not used" variable
x86/kvm: Don't enable IRQ when IRQ enabled in kvm_wait
KVM: stats: Add VM stat for remote tlb flush requests
KVM: Remove unnecessary export of kvm_{inc,dec}_notifier_count()
KVM: x86/mmu: Move lpage_disallowed_link further "down" in kvm_mmu_page
KVM: x86/mmu: Relocate kvm_mmu_page.tdp_mmu_page for better cache locality
Revert "KVM: x86: mmu: Add guest physical address check in translate_gpa()"
KVM: x86/mmu: Remove unused field mmio_cached in struct kvm_mmu_page
kvm: x86: Increase KVM_SOFT_MAX_VCPUS to 710
kvm: x86: Increase MAX_VCPUS to 1024
kvm: x86: Set KVM_MAX_VCPU_ID to 4*KVM_MAX_VCPUS
KVM: VMX: avoid running vmx_handle_exit_irqoff in case of emulation
KVM: x86/mmu: Don't freak out if pml5_root is NULL on 4-level host
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: s390: Enable specification exception interpretation
KVM: arm64: Trim guest debug exception handling
KVM: SVM: Add 5-level page table support for SVM
...
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmEuJwwTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXp0ICACsx9NtQh1f9xGMClYrbobJfGmiwHVV
uKut/44Vg39tSyZB4mQt3A8YcaQj1Nibo6HVmxJtbKbrKwlTGAiQh5fiOmBOd7Re
/rII/S+CGtAyChI1adHTSL2xdk6WY0c7XQw+IPaERBikG5rO81Y6NLjFZNOv494k
JnG9uGGjAcJWFYylPcLxt4sR/hEfE4KDzsWjWOb5azYgo/RwOan6zYDdkUgocp4A
J+zmgCiME8LLmEV19gn7p4gpX7X9m5mcNgn53eICYPhrBqI0PTWocm6DepCEnrQ+
pEobIagWIMx5Dr7euEJwLxFSN7bdzleVOa4FSfM0zUsEjdbiPH47VQFM
=Vae6
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- make Hyper-V code arch-agnostic (Michael Kelley)
- fix sched_clock behaviour on Hyper-V (Ani Sinha)
- fix a fault when Linux runs as the root partition on MSHV (Praveen
Kumar)
- fix VSS driver (Vitaly Kuznetsov)
- cleanup (Sonia Sharma)
* tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv_utils: Set the maximum packet size for VSS driver to the length of the receive buffer
Drivers: hv: Enable Hyper-V code to be built on ARM64
arm64: efi: Export screen_info
arm64: hyperv: Initialize hypervisor on boot
arm64: hyperv: Add panic handler
arm64: hyperv: Add Hyper-V hypercall and register access utilities
x86/hyperv: fix root partition faults when writing to VP assist page MSR
hv: hyperv.h: Remove unused inline functions
drivers: hv: Decouple Hyper-V clock/timer code from VMbus drivers
x86/hyperv: add comment describing TSC_INVARIANT_CONTROL MSR setting bit 0
Drivers: hv: Move Hyper-V misc functionality to arch-neutral code
Drivers: hv: Add arch independent default functions for some Hyper-V handlers
Drivers: hv: Make portions of Hyper-V init code be arch neutral
x86/hyperv: fix for unwanted manipulation of sched_clock when TSC marked unstable
asm-generic/hyperv: Add missing #include of nmi.h
- Support for 32-bit tasks on asymmetric AArch32 systems (on top of the
scheduler changes merged via the tip tree).
- More entry.S clean-ups and conversion to C.
- MTE updates: allow a preferred tag checking mode to be set per CPU
(the overhead of synchronous mode is smaller for some CPUs than
others); optimisations for kernel entry/exit path; optionally disable
MTE on the kernel command line.
- Kselftest improvements for SVE and signal handling, PtrAuth.
- Fix unlikely race where a TLBI could use stale ASID on an ASID
roll-over (found by inspection).
- Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher
exception levels; drop unnecessary sigdelsetmask() call in the
signal32 handling; remove BUG_ON when failing to allocate SVE state
(just signal the process); SYM_CODE annotations.
- Other trivial clean-ups: use macros instead of magic numbers, remove
redundant returns, typos.
-----BEGIN PGP SIGNATURE-----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=X6Wm
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for 32-bit tasks on asymmetric AArch32 systems (on top of the
scheduler changes merged via the tip tree).
- More entry.S clean-ups and conversion to C.
- MTE updates: allow a preferred tag checking mode to be set per CPU
(the overhead of synchronous mode is smaller for some CPUs than
others); optimisations for kernel entry/exit path; optionally disable
MTE on the kernel command line.
- Kselftest improvements for SVE and signal handling, PtrAuth.
- Fix unlikely race where a TLBI could use stale ASID on an ASID
roll-over (found by inspection).
- Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher
exception levels; drop unnecessary sigdelsetmask() call in the
signal32 handling; remove BUG_ON when failing to allocate SVE state
(just signal the process); SYM_CODE annotations.
- Other trivial clean-ups: use macros instead of magic numbers, remove
redundant returns, typos.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits)
arm64: Do not trap PMSNEVFR_EL1
arm64: mm: fix comment typo of pud_offset_phys()
arm64: signal32: Drop pointless call to sigdelsetmask()
arm64/sve: Better handle failure to allocate SVE register storage
arm64: Document the requirement for SCR_EL3.HCE
arm64: head: avoid over-mapping in map_memory
arm64/sve: Add a comment documenting the binutils needed for SVE asm
arm64/sve: Add some comments for sve_save/load_state()
kselftest/arm64: signal: Add a TODO list for signal handling tests
kselftest/arm64: signal: Add test case for SVE register state in signals
kselftest/arm64: signal: Verify that signals can't change the SVE vector length
kselftest/arm64: signal: Check SVE signal frame shows expected vector length
kselftest/arm64: signal: Support signal frames with SVE register data
kselftest/arm64: signal: Add SVE to the set of features we can check for
arm64: replace in_irq() with in_hardirq()
kselftest/arm64: pac: Fix skipping of tests on systems without PAC
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
...