Intel's eXtended Feature Disable (XFD) feature is an extension of the XSAVE
architecture. XFD allows the kernel to enable a feature state in XCR0 and
to receive a #NM trap when a task uses instructions accessing that state.
This is going to be used to postpone the allocation of a larger XSTATE
buffer for a task to the point where it is actually using a related
instruction after the permission to use that facility has been granted.
XFD is not used by the kernel, but only applied to userspace. This is a
matter of policy as the kernel knows how a fpstate is reallocated and the
XFD state.
The compacted XSAVE format is adjustable for dynamic features. Make XFD
depend on XSAVES.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-13-chang.seok.bae@intel.com
On exec(), extended register states saved in the buffer is cleared. With
dynamic features, each task carries variables besides the register states.
The struct fpu has permission information and struct fpstate contains
buffer size and feature masks. They are all dynamically updated with
dynamic features.
Reset the current task's entire FPU data before an exec() so that the new
task starts with default permission and fpstate.
Rename the register state reset function because the old naming confuses as
it does not reset struct fpstate.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-12-chang.seok.bae@intel.com
The default portion of the parent's FPU state is saved in a child task.
With dynamic features enabled, the non-default portion is not saved in a
child's fpstate because these register states are defined to be
caller-saved. The new task's fpstate is therefore the default buffer.
Fork inherits the permission of the parent.
Also, do not use memcpy() when TIF_NEED_FPU_LOAD is set because it is
invalid when the parent has dynamic features.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-11-chang.seok.bae@intel.com
The software reserved portion of the fxsave frame in the signal frame
is copied from structures which have been set up at boot time. With
dynamically enabled features the content of these structures is no
longer correct because the xfeatures and size can be different per task.
Calculate the software reserved portion at runtime and fill in the
xfeatures and size values from the tasks active fpstate.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-10-chang.seok.bae@intel.com
Use the current->group_leader->fpu to check for pending permissions to use
extended features and validate against the resulting user space size which
is stored in the group leaders fpu struct as well.
This prevents a task from installing a too small sized sigaltstack after
permissions to use dynamically enabled features have been granted, but
the task has not (yet) used a related instruction.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-9-chang.seok.bae@intel.com
To allow building up the infrastructure required to support dynamically
enabled FPU features, add:
- XFEATURES_MASK_DYNAMIC
This constant will hold xfeatures which can be dynamically enabled.
- fpu_state_size_dynamic()
A static branch for 64-bit and a simple 'return false' for 32-bit.
This helper allows to add dynamic-feature-specific changes to common
code which is shared between 32-bit and 64-bit without #ifdeffery.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-8-chang.seok.bae@intel.com
Dynamically enabled XSTATE features are by default disabled for all
processes. A process has to request permission to use such a feature.
To support this implement a architecture specific prctl() with the options:
- ARCH_GET_XCOMP_SUPP
Copies the supported feature bitmap into the user space provided
u64 storage. The pointer is handed in via arg2
- ARCH_GET_XCOMP_PERM
Copies the process wide permitted feature bitmap into the user space
provided u64 storage. The pointer is handed in via arg2
- ARCH_REQ_XCOMP_PERM
Request permission for a feature set. A feature set can be mapped to a
facility, e.g. AMX, and can require one or more XSTATE components to
be enabled.
The feature argument is the number of the highest XSTATE component
which is required for a facility to work.
The request argument is not a user supplied bitmap because that makes
filtering harder (think seccomp) and even impossible because to
support 32bit tasks the argument would have to be a pointer.
The permission mechanism works this way:
Task asks for permission for a facility and kernel checks whether that's
supported. If supported it does:
1) Check whether permission has already been granted
2) Compute the size of the required kernel and user space buffer
(sigframe) size.
3) Validate that no task has a sigaltstack installed
which is smaller than the resulting sigframe size
4) Add the requested feature bit(s) to the permission bitmap of
current->group_leader->fpu and store the sizes in the group
leaders fpu struct as well.
If that is successful then the feature is still not enabled for any of the
tasks. The first usage of a related instruction will result in a #NM
trap. The trap handler validates the permission bit of the tasks group
leader and if permitted it installs a larger kernel buffer and transfers
the permission and size info to the new fpstate container which makes all
the FPU functions which require per task information aware of the extended
feature set.
[ tglx: Adopted to new base code, added missing serialization,
massaged namings, comments and changelog ]
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-7-chang.seok.bae@intel.com
The upcoming prctl() which is required to request the permission for a
dynamically enabled feature will also provide an option to retrieve the
supported features. If the CPU does not support XSAVE, the supported
features would be 0 even when the CPU supports FP and SSE.
Provide separate storage for the legacy feature set to avoid that and fill
in the bits in the legacy init function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-6-chang.seok.bae@intel.com
Dynamically enabled features can be requested by any thread of a running
process at any time. The request does neither enable the feature nor
allocate larger buffers. It just stores the permission to use the feature
by adding the features to the permission bitmap and by calculating the
required sizes for kernel and user space.
The reallocation of the kernel buffer happens when the feature is used
for the first time which is caught by an exception. The permission
bitmap is then checked and if the feature is permitted, then it becomes
fully enabled. If not, the task dies similarly to a task which uses an
undefined instruction.
The size information is precomputed to allow proper sigaltstack size checks
once the feature is permitted, but not yet in use because otherwise this
would open race windows where too small stacks could be installed causing
a later fail on signal delivery.
Initialize them to the default feature set and sizes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-5-chang.seok.bae@intel.com
Split out the size calculation from the paranoia check so it can be used
for recalculating buffer sizes when dynamically enabled features are
supported.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
[ tglx: Adopted to changed base code ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-4-chang.seok.bae@intel.com
For historical reasons MINSIGSTKSZ is a constant which became already too
small with AVX512 support.
Add a mechanism to enforce strict checking of the sigaltstack size against
the real size of the FPU frame.
The strict check can be enabled via a config option and can also be
controlled via the kernel command line option 'strict_sas_size' independent
of the config switch.
Enabling it might break existing applications which allocate a too small
sigaltstack but 'work' because they never get a signal delivered. Though it
can be handy to filter out binaries which are not yet aware of
AT_MINSIGSTKSZ.
Also the upcoming support for dynamically enabled FPU features requires a
strict sanity check to ensure that:
- Enabling of a dynamic feature, which changes the sigframe size fits
into an enabled sigaltstack
- Installing a too small sigaltstack after a dynamic feature has been
added is not possible.
Implement the base check which is controlled by config and command line
options.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021225527.10184-3-chang.seok.bae@intel.com
s/CONFIG_OSNOISE_TRAECR/CONFIG_OSNOISE_TRACER/
No functional changes.
Link: https://lkml.kernel.org/r/33924a16f6e5559ce24952ca7d62561604bfd94a.1634308385.git.bristot@kernel.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Update save_v86_state to always complete all of it's work except
possibly some of the copies to userspace even if save_v86_state takes
a fault. This ensures that the kernel is always in a sane state, even
if userspace has done something silly.
When save_v86_state takes a fault update it to force userspace to take
a SIGSEGV and terminate the userspace application.
As Andy pointed out in review of the first version of this change
there are races between sigaction and the application terinating. Now
that the code has been modified to always perform all save_v86_state's
work (except possibly copying to userspace) those races do not matter
from a kernel perspective.
Forcing the userspace application to terminate (by resetting it's
handler to SIGDFL) is there to keep everything as close to the current
behavior as possible while removing the unique (and difficult to
maintain) use of do_exit.
If this new SIGSEGV happens during handle_signal the next time around
the exit_to_user_mode_loop, SIGSEGV will be delivered to userspace.
All of the callers of handle_vm86_trap and handle_vm86_fault run the
exit_to_user_mode_loop before they return to userspace any signal sent
to the current task during their execution will be delivered to the
current task before that tasks exits to usermode.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: H Peter Anvin <hpa@zytor.com>
v1: https://lkml.kernel.org/r/20211020174406.17889-10-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/877de1xcr6.fsf_-_@disp2133
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The function save_v86_state is only called when userspace was
operating in vm86 mode before entering the kernel. Not having vm86
state in the task_struct should never happen. So transform the hand
rolled BUG_ON into an actual BUG_ON to make it clear what is
happening.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: H Peter Anvin <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20211020174406.17889-9-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Hyper-V needs to issue the GHCB HV call in order to read/write MSRs in
Isolation VMs. For that, expose sev_es_ghcb_hv_call().
The Hyper-V Isolation VMs are unenlightened guests and run a paravisor
at VMPL0 for communicating. GHCB pages are being allocated and set up
by that paravisor. Linux gets the GHCB page's physical address via
MSR_AMD64_SEV_ES_GHCB from the paravisor and should not change it.
Add a @set_ghcb_msr parameter to sev_es_ghcb_hv_call() to control
whether the function should set the GHCB's address prior to the call or
not and export that function for use by HyperV.
[ bp: - Massage commit message
- add a struct ghcb forward declaration to fix randconfig builds. ]
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-6-ltykernel@gmail.com
There are no callers for early_init_dt_scan_chosen_arch(), so remove it.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lkml.kernel.org/r/20211022164642.2815706-1-robh@kernel.org
For the upcoming AMX support it's necessary to do a proper integration with
KVM. Currently KVM allocates two FPU structs which are used for saving the user
state of the vCPU thread and restoring the guest state when entering
vcpu_run() and doing the reverse operation before leaving vcpu_run().
With the new fpstate mechanism this can be reduced to one extra buffer by
swapping the fpstate pointer in current:🧵:fpu. This makes the
upcoming support for AMX and XFD simpler because then fpstate information
(features, sizes, xfd) are always consistent and it does not require any
nasty workarounds.
Convert the KVM FPU code over to this new scheme.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211022185313.019454292@linutronix.de
For the upcoming AMX support it's necessary to do a proper integration with
KVM. Currently KVM allocates two FPU structs which are used for saving the user
state of the vCPU thread and restoring the guest state when entering
vcpu_run() and doing the reverse operation before leaving vcpu_run().
With the new fpstate mechanism this can be reduced to one extra buffer by
swapping the fpstate pointer in current:🧵:fpu. This makes the
upcoming support for AMX and XFD simpler because then fpstate information
(features, sizes, xfd) are always consistent and it does not require any
nasty workarounds.
Provide:
- An allocator which initializes the state properly
- A replacement for the existing FPU swap mechanim
Aside of the reduced memory footprint, this also makes state switching
more efficient when TIF_FPU_NEED_LOAD is set. It does not require a
memcpy as the state is already correct in the to be swapped out fpstate.
The existing interfaces will be removed once KVM is converted over.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211022185312.954684740@linutronix.de
Add a synchronize_rcu() after clearing the posted interrupt wakeup handler
to ensure all readers, i.e. in-flight IRQ handlers, see the new handler
before returning to the caller. If the caller is an exiting module and
is unregistering its handler, failure to wait could result in the IRQ
handler jumping into an unloaded module.
The registration path doesn't require synchronization, as it's the
caller's responsibility to not generate interrupts it cares about until
after its handler is registered.
Fixes: f6b3c72c23 ("x86/irq: Define a global vector for VT-d Posted-Interrupts")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009001107.3936588-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently AMD/Hygon do not populate l2c_id, this means that for SMT
enabled systems they report an L2 per thread. This is ofcourse not
true but was harmless so far.
However, since commit: 66558b730f ("sched: Add cluster scheduler
level for x86") the scheduler topology setup requires:
SMT <= L2 <= LLC
Which leads to noisy warnings and possibly weird behaviour on affected
chips.
Therefore change the topology generation such that if l2c_id is not
populated it follows the SMT topology, thereby satisfying the
constraint.
Fixes: 66558b730f ("sched: Add cluster scheduler level for x86")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
For bare-metal SGX on real hardware, the hardware provides guarantees
SGX state at reboot. For instance, all pages start out uninitialized.
The vepc driver provides a similar guarantee today for freshly-opened
vepc instances, but guests such as Windows expect all pages to be in
uninitialized state on startup, including after every guest reboot.
Some userspace implementations of virtual SGX would rather avoid having
to close and reopen the /dev/sgx_vepc file descriptor and re-mmap the
virtual EPC. For example, they could sandbox themselves after the guest
starts and forbid further calls to open(), in order to mitigate exploits
from untrusted guests.
Therefore, add a ioctl that does this with EREMOVE. Userspace can
invoke the ioctl to bring its vEPC pages back to uninitialized state.
There is a possibility that some pages fail to be removed if they are
SECS pages, and the child and SECS pages could be in separate vEPC
regions. Therefore, the ioctl returns the number of EREMOVE failures,
telling userspace to try the ioctl again after it's done with all
vEPC regions. A more verbose description of the correct usage and
the possible error conditions is documented in sgx.rst.
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20211021201155.1523989-3-pbonzini@redhat.com
For bare-metal SGX on real hardware, the hardware provides guarantees
SGX state at reboot. For instance, all pages start out uninitialized.
The vepc driver provides a similar guarantee today for freshly-opened
vepc instances, but guests such as Windows expect all pages to be in
uninitialized state on startup, including after every guest reboot.
One way to do this is to simply close and reopen the /dev/sgx_vepc file
descriptor and re-mmap the virtual EPC. However, this is problematic
because it prevents sandboxing the userspace (for example forbidding
open() after the guest starts; this is doable with heavy use of SCM_RIGHTS
file descriptor passing).
In order to implement this, we will need a ioctl that performs
EREMOVE on all pages mapped by a /dev/sgx_vepc file descriptor:
other possibilities, such as closing and reopening the device,
are racy.
Start the implementation by creating a separate function with just
the __eremove wrapper.
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20211021201155.1523989-2-pbonzini@redhat.com
The microcode loader has been looping through __start_builtin_fw down to
__end_builtin_fw to look for possibly built-in firmware for microcode
updates.
Now that the firmware loader code has exported an API for looping
through the kernel's built-in firmware section, use it and drop the x86
implementation in favor.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211021155843.1969401-4-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that everything is mopped up, move all the helpers and prototypes into
the core header. They are not required by the outside.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.514095101@linutronix.de
xfeatures_mask_fpstate() is no longer valid when dynamically enabled
features come into play.
Rework restore_regs_from_fpstate() so it takes a constant mask which will
then be applied against the maximum feature set so that the restore
operation brings all features which are not in the xsave buffer xfeature
bitmap into init state.
This ensures that if the previous task used a dynamically enabled feature
that the task which restores has all unused components properly initialized.
Cleanup the last user of xfeatures_mask_fpstate() as well and remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.461348278@linutronix.de
Use the new fpu_user_cfg to retrieve the information instead of
xfeatures_mask_uabi() which will be no longer correct when dynamically
enabled features become available.
Using fpu_user_cfg is appropriate when setting XCOMP_BV in the
init_fpstate since it has space allocated for "max_features". But,
normal fpstates might only have space for default xfeatures. Since
XRSTOR* derives the format of the XSAVE buffer from XCOMP_BV, this can
lead to XRSTOR reading out of bounds.
So when copying actively used fpstate, simply read the XCOMP_BV features
bits directly out of the fpstate instead.
This correction courtesy of Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.408879849@linutronix.de
Currently, Linux probes for X86_BUG_NULL_SEL unconditionally which
makes it unsafe to migrate in a virtualised environment as the
properties across the migration pool might differ.
To be specific, the case which goes wrong is:
1. Zen1 (or earlier) and Zen2 (or later) in a migration pool
2. Linux boots on Zen2, probes and finds the absence of X86_BUG_NULL_SEL
3. Linux is then migrated to Zen1
Linux is now running on a X86_BUG_NULL_SEL-impacted CPU while believing
that the bug is fixed.
The only way to address the problem is to fully trust the "no longer
affected" CPUID bit when virtualised, because in the above case it would
be clear deliberately to indicate the fact "you might migrate to
somewhere which has this behaviour".
Zen3 adds the NullSelectorClearsBase CPUID bit to indicate that loading
a NULL segment selector zeroes the base and limit fields, as well as
just attributes. Zen2 also has this behaviour but doesn't have the NSCB
bit.
[ bp: Minor touchups. ]
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20211021104744.24126-1-jane.malalane@citrix.com
Move the feature mask storage to the kernel and user config
structs. Default and maximum feature set are the same for now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.352041752@linutronix.de
Use the new kernel and user space config storage to store and retrieve the
XSTATE buffer sizes. The default and the maximum size are the same for now,
but will change when support for dynamically enabled features is added.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.296830097@linutronix.de
The size calculations are partially unreadable gunk. Clean them up.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.241223689@linutronix.de
Provide a struct to store information about the maximum supported and the
default feature set and buffer sizes for both user and kernel space.
This allows quick retrieval of this information for the upcoming support
for dynamically enabled features.
[ bp: Add vertical spacing between the struct members. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211014230739.126107370@linutronix.de
When code running on the VC2 stack causes a nested VC exception, the
handler will not handle it as expected but goes again into the error
path.
The result is that the panic() call happening when the VC exception
was raised in an invalid context is called recursively. Fix this by
checking the interrupted stack too and only call panic if it is not
the VC2 stack.
[ bp: Fixup comment. ]
Fixes: 0786138c78 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Reported-by: Xinyang Ge <xing@microsoft.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021080833.30875-3-joro@8bytes.org
The value of STACK_TYPE_EXCEPTION_LAST points to the last _valid_
exception stack. Reflect that in the check done in the
vc_switch_off_ist() function.
Fixes: a13644f3a5 ("x86/entry/64: Add entry code for #VC handler")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021080833.30875-2-joro@8bytes.org
DM&P devices were not being properly identified, which resulted in
unneeded Spectre/Meltdown mitigations being applied.
The manufacturer states that these devices execute always in-order and
don't support either speculative execution or branch prediction, so
they are not vulnerable to this class of attack. [1]
This is something I've personally tested by a simple timing analysis
on my Vortex86MX CPU, and can confirm it is true.
Add identification for some devices that lack the CPUID product name
call, so they appear properly on /proc/cpuinfo.
¹https://www.ssv-embedded.de/doks/infos/DMP_Ann_180108_Meltdown.pdf
[ bp: Massage commit message. ]
Signed-off-by: Marcos Del Sol Vives <marcos@orca.pet>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211017094408.1512158-1-marcos@orca.pet
For dynamically enabled features it's required to get the features which
are enabled for that context when restoring from sigframe.
The same applies for all signal frame size calculations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/87ilxz5iew.ffs@tglx
Prepare for dynamically enabled states per task. The function needs to
retrieve the features and sizes which are valid in a fpstate
context. Retrieve them from fpstate.
Move the function declarations to the core header as they are not
required anywhere else.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145323.233529986@linutronix.de
With dynamically enabled features the copy function must know the features
and the size which is valid for the task. Retrieve them from fpstate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145323.181495492@linutronix.de
With dynamically enabled features the sigframe code must know the features
which are enabled for the task. Get them from fpstate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145323.077781448@linutronix.de
With variable feature sets XSAVE[S] requires to know the feature set for
which the buffer is valid. Retrieve it from fpstate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145323.025695590@linutronix.de
Make use of fpstate::size in various places which require the buffer size
information for sanity checks or memcpy() sizing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145322.973518954@linutronix.de
Add state size and feature mask information to the fpstate container. This
will be used for runtime checks with the upcoming support for dynamically
enabled features and dynamically sized buffers. That avoids conditionals
all over the place as the required information is accessible for both
default and extended buffers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145322.921388806@linutronix.de
In preparation for dynamically enabled FPU features move the function
out of line as the goal is to expose less and not more information.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145322.869001791@linutronix.de
If fork fails early then the copied task struct would carry the fpstate
pointer of the parent task.
Not a problem right now, but later when dynamically allocated buffers
are available, keeping the pointer might result in freeing the
parent's buffer. Set it to NULL which prevents that. If fork reaches
clone_thread(), the pointer will be correctly set to the new task
context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145322.817101108@linutronix.de
We don't need special hook for graph tracer entry point,
but instead we can use graph_ops::func function to install
the return_hooker.
This moves the graph tracing setup _before_ the direct
trampoline prepares the stack, so the return_hooker will
be called when the direct trampoline is finished.
This simplifies the code, because we don't need to take into
account the direct trampoline setup when preparing the graph
tracer hooker and we can allow function graph tracer on entries
registered with direct trampoline.
Link: https://lkml.kernel.org/r/20211008091336.33616-4-jolsa@kernel.org
[fixed compile error reported by kernel test robot <lkp@intel.com>]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Convert the rest of the core code to the new register storage mechanism in
preparation for dynamically sized buffers.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145322.659456185@linutronix.de
Convert signal related code to the new register storage mechanism in
preparation for dynamically sized buffers.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145322.607370221@linutronix.de
