Each thread executing in an enclave is associated with a Thread Control
Structure (TCS). The test enclave contains two hardcoded TCS. Each TCS
contains meta-data used by the hardware to save and restore thread specific
information when entering/exiting the enclave.
The two TCS structures within the test enclave share their SSA (State Save
Area) resulting in the threads clobbering each other's data. Fix this by
providing each TCS their own SSA area.
Additionally, there is an 8K stack space and its address is
computed from the enclave entry point which is correctly done for
TCS #1 that starts on the first address inside the enclave but
results in out of bounds memory when entering as TCS #2. Split 8K
stack space into two separate pages with offset symbol between to ensure
the current enclave entry calculation can continue to be used for both
threads.
While using the enclave with multiple threads requires these fixes the
impact is not apparent because every test up to this point enters the
enclave from the first TCS.
More detail about the stack fix:
-------------------------------
Before this change the test enclave (test_encl) looks as follows:
.tcs (2 pages):
(page 1) TCS #1
(page 2) TCS #2
.text (1 page)
One page of code
.data (5 pages)
(page 1) encl_buffer
(page 2) encl_buffer
(page 3) SSA
(page 4 and 5) STACK
encl_stack:
As shown above there is a symbol, encl_stack, that points to the end of the
.data segment (pointing to the end of page 5 in .data) which is also the
end of the enclave.
The enclave entry code computes the stack address by adding encl_stack to
the pointer to the TCS that entered the enclave. When entering at TCS #1
the stack is computed correctly but when entering at TCS #2 the stack
pointer would point to one page beyond the end of the enclave and a #PF
would result when TCS #2 attempts to enter the enclave.
The fix involves moving the encl_stack symbol between the two stack pages.
Doing so enables the stack address computation in the entry code to compute
the correct stack address for each TCS.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/a49dc0d85401db788a0a3f0d795e848abf3b1f44.1636997631.git.reinette.chatre@intel.com
The Enclave Page Cache Map (EPCM) is a secure structure used by the
processor to track the contents of the enclave page cache. The EPCM
contains permissions with which enclave pages can be accessed. SGX
support allows EPCM and PTE page permissions to differ - as long as
the PTE permissions do not exceed the EPCM permissions.
Add a test that:
(1) Creates an SGX enclave page with writable EPCM permission.
(2) Changes the PTE permission on the page to read-only. This should
be permitted because the permission does not exceed the EPCM
permission.
(3) Attempts a write to the page. This should generate a page fault
(#PF) because of the read-only PTE even though the EPCM
permissions allow the page to be written to.
This introduces the first test of SGX exception handling. In this test
the issue that caused the exception (PTE page permissions) can be fixed
from outside the enclave and after doing so it is possible to re-enter
enclave at original entrypoint with ERESUME.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/3bcc73a4b9fe8780bdb40571805e7ced59e01df7.1636997631.git.reinette.chatre@intel.com
SGX selftests prepares a data structure outside of the enclave with
the type of and data for the operation that needs to be run within
the enclave. At this time only two complementary operations are supported
by the enclave: copying a value from outside the enclave into a default
buffer within the enclave and reading a value from the enclave's default
buffer into a variable accessible outside the enclave.
In preparation for more operations supported by the enclave the names of the
current enclave operations are changed to more accurately reflect the
operations and more easily distinguish it from future operations:
* The enums ENCL_OP_PUT and ENCL_OP_GET are renamed to ENCL_OP_PUT_TO_BUFFER
and ENCL_OP_GET_FROM_BUFFER respectively.
* The structs encl_op_put and encl_op_get are renamed to encl_op_put_to_buf
and encl_op_get_from_buf respectively.
* The enclave functions do_encl_op_put and do_encl_op_get are renamed to
do_encl_op_put_to_buf and do_encl_op_get_from_buf respectively.
No functional changes.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/023fda047c787cf330b88ed9337705edae6a0078.1636997631.git.reinette.chatre@intel.com
To add more operations to the test enclave, the protocol needs to allow
to have operations with varying parameters. Create a separate parameter
struct for each existing operation, with the shared parameters in struct
encl_op_header.
[reinette: rebased to apply on top of oversubscription test series]
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/f9a4a8c436b538003b8ebddaa66083992053cef1.1636997631.git.reinette.chatre@intel.com
Add a variation of the unclobbered_vdso test.
In the new test, create a heap for the test enclave, which has the same
size as all available Enclave Page Cache (EPC) pages in the system. This
will guarantee that all test_encl.elf pages *and* SGX Enclave Control
Structure (SECS) have been swapped out by the page reclaimer during the
load time.
This test will trigger both the page reclaimer and the page fault handler.
The page reclaimer triggered, while the heap is being created during the
load time. The page fault handler is triggered for all the required pages,
while the test case is executing.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/41f7c508eea79a3198b5014d7691903be08f9ff1.1636997631.git.reinette.chatre@intel.com
Create the test enclave inside each TEST_F(), instead of FIXTURE_SETUP(),
so that the heap size can be defined per test.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/70ca264535d2ca0dc8dcaf2281e7d6965f8d4a24.1636997631.git.reinette.chatre@intel.com
Introduce setup_test_encl() so that the enclave creation can be moved to
TEST_F()'s. This is required for a reclaimer test where the heap size needs
to be set large enough to triger the page reclaimer.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/bee0ca867a95828a569c1ba2a8e443a44047dc71.1636997631.git.reinette.chatre@intel.com
Logging is always a compromise between clarity and detail. The main use
case for dumping VMA's is when FIXTURE_SETUP() fails, and is less important
for enclaves that do initialize correctly. Therefore, print the segments
and /proc/self/maps only in the error case.
Finally, if a single test ever creates multiple enclaves, the amount of
log lines would become enormous.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/23cef0ae1de3a8a74cbfbbe74eca48ca3f300fde.1636997631.git.reinette.chatre@intel.com
Create a heap for the test enclave, which is allocated from /dev/null,
and left unmeasured. This is beneficial by its own because it verifies
that an enclave built from multiple choices, works properly. If LSM
hooks are added for SGX some day, a multi source enclave has higher
probability to trigger bugs on access control checks.
The immediate need comes from the need to implement page reclaim tests.
In order to trigger the page reclaimer, one can just set the size of
the heap to high enough.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/e070c5f23578c29608051cab879b1d276963a27a.1636997631.git.reinette.chatre@intel.com
For a heap makes sense to leave its contents "unmeasured" in the SGX
enclave build process, meaning that they won't contribute to the
cryptographic signature (a RSA-3072 signed SHA56 hash) of the enclave.
Enclaves are signed blobs where the signature is calculated both from
page data and also from "structural properties" of the pages. For
instance a page offset of *every* page added to the enclave is hashed.
For data, this is optional, not least because hashing a page has a
significant contribution to the enclave load time. Thus, where there is
no reason to hash, do not. The SGX ioctl interface supports this with
SGX_PAGE_MEASURE flag. Only when the flag is *set*, data is measured.
Add seg->measure boolean flag to struct encl_segment. Only when the
flag is set, include the segment data to the signature (represented
by SIGSTRUCT architectural structure).
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/625b6fe28fed76275e9238ec4e15ec3c0d87de81.1636997631.git.reinette.chatre@intel.com
Define source per segment so that enclave pages can be added from different
sources, e.g. anonymous VMA for zero pages. In other words, add 'src' field
to struct encl_segment, and assign it to 'encl->src' for pages inherited
from the enclave binary.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/7850709c3089fe20e4bcecb8295ba87c54cc2b4a.1636997631.git.reinette.chatre@intel.com
The enclave binary (test_encl.elf) is built with only three sections (tcs,
text, and data) as controlled by its custom linker script.
If gcc is built with "--enable-linker-build-id" (this appears to be a
common configuration even if it is by default off) then gcc
will pass "--build-id" to the linker that will prompt it (the linker) to
write unique bits identifying the linked file to a ".note.gnu.build-id"
section.
The section ".note.gnu.build-id" does not exist in the test enclave
resulting in the following warning emitted by the linker:
/usr/bin/ld: warning: .note.gnu.build-id section discarded, --build-id
ignored
The test enclave does not use the build id within the binary so fix the
warning by passing a build id of "none" to the linker that will disable the
setting from any earlier "--build-id" options and thus disable the attempt
to write the build id to a ".note.gnu.build-id" section that does not
exist.
Link: https://lore.kernel.org/linux-sgx/20191017030340.18301-2-sean.j.christopherson@intel.com/
Suggested-by: Cedric Xing <cedric.xing@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/ca0f8a81fc1e78af9bdbc6a88e0f9c37d82e53f2.1636997631.git.reinette.chatre@intel.com
Now that cxl_acpi has been converted to use the core ACPI CEDT sub-table
parser, update cxl_test to inject CFMWS and CHBS data directly into
cxl_acpi's handlers.
Cc: Alison Schofield <alison.schofield@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/163553711363.2509508.17428994087868269952.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add mocked health information for cxl_test memdevs. This allows
cxl-cli's 'list' command to display the canned health_info fields.
Cc: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20211018051251.2289112-1-vishal.l.verma@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The 'struct cxl_mem' object actually represents the state of a CXL
device within the driver. Comments indicating that 'struct cxl_mem' is a
device itself are incorrect. It is data layered on top of a CXL Memory
Expander class device. Rename it 'struct cxl_dev_state'. The 'struct'
cxl_memdev' structure represents a Linux CXL memory device object, and
it uses services and information provided by 'struct cxl_dev_state'.
Update the structure name, function names, and the kdocs to reflect the
real uses of this structure.
Some helper functions that were previously prefixed "cxl_mem_" are
renamed to just "cxl_".
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20211102202901.3675568-3-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-11-15
We've added 72 non-merge commits during the last 13 day(s) which contain
a total of 171 files changed, 2728 insertions(+), 1143 deletions(-).
The main changes are:
1) Add btf_type_tag attributes to bring kernel annotations like __user/__rcu to
BTF such that BPF verifier will be able to detect misuse, from Yonghong Song.
2) Big batch of libbpf improvements including various fixes, future proofing APIs,
and adding a unified, OPTS-based bpf_prog_load() low-level API, from Andrii Nakryiko.
3) Add ingress_ifindex to BPF_SK_LOOKUP program type for selectively applying the
programmable socket lookup logic to packets from a given netdev, from Mark Pashmfouroush.
4) Remove the 128M upper JIT limit for BPF programs on arm64 and add selftest to
ensure exception handling still works, from Russell King and Alan Maguire.
5) Add a new bpf_find_vma() helper for tracing to map an address to the backing
file such as shared library, from Song Liu.
6) Batch of various misc fixes to bpftool, fixing a memory leak in BPF program dump,
updating documentation and bash-completion among others, from Quentin Monnet.
7) Deprecate libbpf bpf_program__get_prog_info_linear() API and migrate its users as
the API is heavily tailored around perf and is non-generic, from Dave Marchevsky.
8) Enable libbpf's strict mode by default in bpftool and add a --legacy option as an
opt-out for more relaxed BPF program requirements, from Stanislav Fomichev.
9) Fix bpftool to use libbpf_get_error() to check for errors, from Hengqi Chen.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpftool: Use libbpf_get_error() to check error
bpftool: Fix mixed indentation in documentation
bpftool: Update the lists of names for maps and prog-attach types
bpftool: Fix indent in option lists in the documentation
bpftool: Remove inclusion of utilities.mak from Makefiles
bpftool: Fix memory leak in prog_dump()
selftests/bpf: Fix a tautological-constant-out-of-range-compare compiler warning
selftests/bpf: Fix an unused-but-set-variable compiler warning
bpf: Introduce btf_tracing_ids
bpf: Extend BTF_ID_LIST_GLOBAL with parameter for number of IDs
bpftool: Enable libbpf's strict mode by default
docs/bpf: Update documentation for BTF_KIND_TYPE_TAG support
selftests/bpf: Clarify llvm dependency with btf_tag selftest
selftests/bpf: Add a C test for btf_type_tag
selftests/bpf: Rename progs/tag.c to progs/btf_decl_tag.c
selftests/bpf: Test BTF_KIND_DECL_TAG for deduplication
selftests/bpf: Add BTF_KIND_TYPE_TAG unit tests
selftests/bpf: Test libbpf API function btf__add_type_tag()
bpftool: Support BTF_KIND_TYPE_TAG
libbpf: Support BTF_KIND_TYPE_TAG
...
====================
Link: https://lore.kernel.org/r/20211115162008.25916-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the CFLAGS options were incorrectly removed in the recent rework
of the GPIO selftests. While some of the flags were specific to the old
implementation the remainder are still relevant. Restore those options.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
When compiled with -Wall gpio-mockup-cdev.c reports an uninitialised
variable warning. This is a false positive, as the variable is ignored
in the case it is uninitialised, but initialise the variable anyway
to remove the warning.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpio selftests build against the system includes rather than the
headers from the linux tree. This results in the compile failing if
the system includes are outdated.
Prefer the headers from the linux tree, as per other selftests.
Fixes: 8bc395a6a2 ("selftests: gpio: rework and simplify test implementation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
[Kent: reworded commit comment and added Fixes:]
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There are now at least three distinct flavours of netcat/nc tool:
'original' version, one version ported from openbsd and nmap-ncat.
The script only works with original because it sets SOREUSEPORT option.
Other nc versions return 'port already in use' error and port shadow test fails:
PASS: inet IPv6 redirection for ns2-hMHcaRvx
nc: bind failed: Address already in use
ERROR: portshadow test default: got reply from "ROUTER", not CLIENT as intended
Switch to socat instead.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* Guest API and guest kernel support for SEV live migration
* SEV and SEV-ES intra-host migration
Bugfixes and cleanups for x86:
* Fix misuse of gfn-to-pfn cache when recording guest steal time / preempted status
* Fix selftests on APICv machines
* Fix sparse warnings
* Fix detection of KVM features in CPUID
* Cleanups for bogus writes to MSR_KVM_PV_EOI_EN
* Fixes and cleanups for MSR bitmap handling
* Cleanups for INVPCID
* Make x86 KVM_SOFT_MAX_VCPUS consistent with other architectures
Bugfixes for ARM:
* Fix finalization of host stage2 mappings
* Tighten the return value of kvm_vcpu_preferred_target()
* Make sure the extraction of ESR_ELx.EC is limited to architected bits
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGO1usUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOsXgf/d2CgZmTxZii/pOt0JKGSDKwRdoti
pfbmtXwTkagqg2tIJtEsxwvcc26Q2VLyg9mlEelX1I8KVlexSa8mDtbGWHLFilsc
JIZY8lE96wtlr9AyuN06K44QingDMIbXzlxcwO+muS3zTlSPsNkPcaVDk5PL35sN
Wy2GA6GCLWv6iTLCtlX5EzbcgkrR+Mypj4lGSdXGRqfBKVFOQjeVt+Q3YzOPuacS
03NBlYOmRxTnAGXfeAVs0/zEa69u/dYjBmwDPe6ERma4u8thHv0U/fDAh5C/ES7q
42Thes/JOYnEZiBQ1xZLsHqRII0achbJKZhmxqPwjRf/u6eXsfz0KY9FBg==
=kN8U
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"New x86 features:
- Guest API and guest kernel support for SEV live migration
- SEV and SEV-ES intra-host migration
Bugfixes and cleanups for x86:
- Fix misuse of gfn-to-pfn cache when recording guest steal time /
preempted status
- Fix selftests on APICv machines
- Fix sparse warnings
- Fix detection of KVM features in CPUID
- Cleanups for bogus writes to MSR_KVM_PV_EOI_EN
- Fixes and cleanups for MSR bitmap handling
- Cleanups for INVPCID
- Make x86 KVM_SOFT_MAX_VCPUS consistent with other architectures
Bugfixes for ARM:
- Fix finalization of host stage2 mappings
- Tighten the return value of kvm_vcpu_preferred_target()
- Make sure the extraction of ESR_ELx.EC is limited to architected
bits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: SEV: unify cgroup cleanup code for svm_vm_migrate_from
KVM: x86: move guest_pv_has out of user_access section
KVM: x86: Drop arbitrary KVM_SOFT_MAX_VCPUS
KVM: Move INVPCID type check from vmx and svm to the common kvm_handle_invpcid()
KVM: VMX: Add a helper function to retrieve the GPR index for INVPCID, INVVPID, and INVEPT
KVM: nVMX: Clean up x2APIC MSR handling for L2
KVM: VMX: Macrofy the MSR bitmap getters and setters
KVM: nVMX: Handle dynamic MSR intercept toggling
KVM: nVMX: Query current VMCS when determining if MSR bitmaps are in use
KVM: x86: Don't update vcpu->arch.pv_eoi.msr_val when a bogus value was written to MSR_KVM_PV_EOI_EN
KVM: x86: Rename kvm_lapic_enable_pv_eoi()
KVM: x86: Make sure KVM_CPUID_FEATURES really are KVM_CPUID_FEATURES
KVM: x86: Add helper to consolidate core logic of SET_CPUID{2} flows
kvm: mmu: Use fast PF path for access tracking of huge pages when possible
KVM: x86/mmu: Properly dereference rcu-protected TDP MMU sptep iterator
KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active
kvm: x86: Convert return type of *is_valid_rdpmc_ecx() to bool
KVM: x86: Fix recording of guest steal time / preempted status
selftest: KVM: Add intra host migration tests
selftest: KVM: Add open sev dev helper
...
Commit a985442fde ("selftests: net: properly support IPv6 in GSO GRE test")
is not compatible with:
Ncat: Version 7.80 ( https://nmap.org/ncat )
(which is distributed with Fedora/Red Hat), tests fail with:
nc: invalid option -- 'N'
Let's switch to socat which is far more dependable.
Fixes: 025efa0a82 ("selftests: add simple GSO GRE test")
Fixes: a985442fde ("selftests: net: properly support IPv6 in GSO GRE test")
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Link: https://lore.kernel.org/r/20211111162929.530470-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit be79505caf ("tools/runqslower: Install libbpf headers when
building") uses the target libbpf to build the host bpftool, which
doesn't work when cross-building:
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -C tools/bpf/runqslower O=/tmp/runqslower
...
LINK /tmp/runqslower/bpftool/bpftool
/usr/bin/ld: /tmp/runqslower/libbpf/libbpf.a(libbpf-in.o): Relocations in generic ELF (EM: 183)
/usr/bin/ld: /tmp/runqslower/libbpf/libbpf.a: error adding symbols: file in wrong format
collect2: error: ld returned 1 exit status
When cross-building, the target architecture differs from the host. The
bpftool used for building runqslower is executed on the host, and thus
must use a different libbpf than that used for runqslower itself.
Remove the LIBBPF_OUTPUT and LIBBPF_DESTDIR parameters, so the bpftool
build makes its own library if necessary.
In the selftests, pass the host bpftool, already a prerequisite for the
runqslower recipe, as BPFTOOL_OUTPUT. The runqslower Makefile will use
the bpftool that's already built for selftests instead of making a new
one.
Fixes: be79505caf ("tools/runqslower: Install libbpf headers when building")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211112155128.565680-1-jean-philippe@linaro.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that two registers with a map_value loaded from a nested
map are considered equivalent for the purpose of state pruning
and don't cause the verifier to revisit a pruning point.
This uses a rather crude match on the number of insns visited by
the verifier, which might change in the future. I've therefore
tried to keep the code as "unpruneable" as possible by having
the code paths only converge on the second to last instruction.
Should you require to adjust the test in the future, reducing the
number of processed instructions should always be safe. Increasing
them could cause another regression, so proceed with caution.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CACAyw99hVEJFoiBH_ZGyy=+oO-jyydoz6v1DeKPKs2HVsUH28w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20211111161452.86864-1-lmb@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When using clang to build selftests with LLVM=1 in make commandline,
I hit the following compiler warning:
benchs/bench_bloom_filter_map.c:84:46: warning: result of comparison of constant 256
with expression of type '__u8' (aka 'unsigned char') is always false
[-Wtautological-constant-out-of-range-compare]
if (args.value_size < 2 || args.value_size > 256) {
~~~~~~~~~~~~~~~ ^ ~~~
The reason is arg.vaue_size has type __u8, so comparison "args.value_size > 256"
is always false.
This patch fixed the issue by doing proper comparison before assigning the
value to args.value_size. The patch also fixed the same issue in two
other places.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112204838.3579953-1-yhs@fb.com
When using clang to build selftests with LLVM=1 in make commandline,
I hit the following compiler warning:
xdpxceiver.c:747:6: warning: variable 'total' set but not used [-Wunused-but-set-variable]
u32 total = 0;
^
This patch fixed the issue by removing that declaration and its
assocatied unused operation.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112204833.3579457-1-yhs@fb.com
btf_tag selftest needs certain llvm versions (>= llvm14).
Make it clear in the selftests README.rst file.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012651.1508549-1-yhs@fb.com
The following is the main btf_type_tag usage in the
C test:
#define __tag1 __attribute__((btf_type_tag("tag1")))
#define __tag2 __attribute__((btf_type_tag("tag2")))
struct btf_type_tag_test {
int __tag1 * __tag1 __tag2 *p;
} g;
The bpftool raw dump with related types:
[4] INT 'int' size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[11] STRUCT 'btf_type_tag_test' size=8 vlen=1
'p' type_id=14 bits_offset=0
[12] TYPE_TAG 'tag1' type_id=16
[13] TYPE_TAG 'tag2' type_id=12
[14] PTR '(anon)' type_id=13
[15] TYPE_TAG 'tag1' type_id=4
[16] PTR '(anon)' type_id=15
[17] VAR 'g' type_id=11, linkage=global
With format C dump, we have
struct btf_type_tag_test {
int __attribute__((btf_type_tag("tag1"))) * __attribute__((btf_type_tag("tag1"))) __attribute__((btf_type_tag("tag2"))) *p;
};
The result C code is identical to the original definition except macro's are gone.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012646.1508231-1-yhs@fb.com
Rename progs/tag.c to progs/btf_decl_tag.c so we can introduce
progs/btf_type_tag.c in the next patch.
Also create a subtest for btf_decl_tag in prog_tests/btf_tag.c
so we can introduce btf_type_tag subtest in the next patch.
I also took opportunity to remove the check whether __has_attribute
is defined or not in progs/btf_decl_tag.c since all recent
clangs should already support this macro.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012641.1507144-1-yhs@fb.com
btf__dedup() and struct btf_dedup_opts were added before we figured out
OPTS mechanism. As such, btf_dedup_opts is non-extensible without
breaking an ABI and potentially crashing user application.
Unfortunately, btf__dedup() and btf_dedup_opts are short and succinct
names that would be great to preserve and use going forward. So we use
___libbpf_override() macro approach, used previously for bpf_prog_load()
API, to define a new btf__dedup() variant that accepts only struct btf *
and struct btf_dedup_opts * arguments, and rename the old btf__dedup()
implementation into btf__dedup_deprecated(). This keeps both source and
binary compatibility with old and new applications.
The biggest problem was struct btf_dedup_opts, which wasn't OPTS-based,
and as such doesn't have `size_t sz;` as a first field. But btf__dedup()
is a pretty rarely used API and I believe that the only currently known
users (besides selftests) are libbpf's own bpf_linker and pahole.
Neither use case actually uses options and just passes NULL. So instead
of doing extra hacks, just rewrite struct btf_dedup_opts into OPTS-based
one, move btf_ext argument into those opts (only bpf_linker needs to
dedup btf_ext, so it's not a typical thing to specify), and drop never
used `dont_resolve_fwds` option (it was never used anywhere, AFAIK, it
makes BTF dedup much less useful and efficient).
Just in case, for old implementation, btf__dedup_deprecated(), detect
non-NULL options and error out with helpful message, to help users
migrate, if there are any user playing with btf__dedup().
The last remaining piece is dedup_table_size, which is another
anachronism from very early days of BTF dedup. Since then it has been
reduced to the only valid value, 1, to request forced hash collisions.
This is only used during testing. So instead introduce a bool flag to
force collisions explicitly.
This patch also adapts selftests to new btf__dedup() and btf_dedup_opts
use to avoid selftests breakage.
[0] Closes: https://github.com/libbpf/libbpf/issues/281
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111053624.190580-4-andrii@kernel.org
Few clean ups and single-line simplifications. Also split CLEAN command
into multiple $(RM) invocations as it gets dangerously close to too long
argument list. Make sure that -o <output.o> is used always as the last
argument for saner verbose make output.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111053624.190580-3-andrii@kernel.org
After recent refactoring bpf_prog_test_load(), used across multiple
selftests, lost ability to specify extra log_level 1 or 2 (for -vv and
-vvv, respectively). Fix that problem by using bpf_object__load_xattr()
API that supports extra log_level flags. Also restore
BPF_F_TEST_RND_HI32 prog_flags by utilizing new bpf_program__set_extra_flags()
API.
Fixes: f87c1930ac ("selftests/bpf: Merge test_stub.c into testing_helpers.c")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211111051758.92283-3-andrii@kernel.org
and netfilter.
Current release - regressions:
- bpf: do not reject when the stack read size is different
from the tracked scalar size
- net: fix premature exit from NAPI state polling in napi_disable()
- riscv, bpf: fix RV32 broken build, and silence RV64 warning
Current release - new code bugs:
- net: fix possible NULL deref in sock_reserve_memory
- amt: fix error return code in amt_init(); fix stopping the workqueue
- ax88796c: use the correct ioctl callback
Previous releases - always broken:
- bpf: stop caching subprog index in the bpf_pseudo_func insn
- security: fixups for the security hooks in sctp
- nfc: add necessary privilege flags in netlink layer, limit operations
to admin only
- vsock: prevent unnecessary refcnt inc for non-blocking connect
- net/smc: fix sk_refcnt underflow on link down and fallback
- nfnetlink_queue: fix OOB when mac header was cleared
- can: j1939: ignore invalid messages per standard
- bpf, sockmap:
- fix race in ingress receive verdict with redirect to self
- fix incorrect sk_skb data_end access when src_reg = dst_reg
- strparser, and tls are reusing qdisc_skb_cb and colliding
- ethtool: fix ethtool msg len calculation for pause stats
- vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries
to access an unregistering real_dev
- udp6: make encap_rcv() bump the v6 not v4 stats
- drv: prestera: add explicit padding to fix m68k build
- drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge
- drv: mvpp2: fix wrong SerDes reconfiguration order
Misc & small latecomers:
- ipvs: auto-load ipvs on genl access
- mctp: sanity check the struct sockaddr_mctp padding fields
- libfs: support RENAME_EXCHANGE in simple_rename()
- avoid double accounting for pure zerocopy skbs
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmGNQdwACgkQMUZtbf5S
IrsiMQ//f66lTJ8PJ5Qj70hX9dC897olx7uGHB9eiKoyOcJI459hFlfXwRU2T4Tf
fPNwPNUQ9Mynw9tX/jWEi+7zd6r6TSHGXK49U9/rIbQ95QjKY4LHowIE63x+vPl2
5Cpf+80zXC3DUX1fijgyG1ujnU3kBaqopTxDLmlsHw2PGkwT5Ox1DUwkhc370eEL
xlpq3PYGWA8/AQNyhSVBkG/UmoLaq0jYNP5yVcOj4jGjgcgLe1SLrqczENr35QHZ
cRkuBsFBMBZF7wSX2f9qQIB/+b1pcLlD9IO+K3S7Ruq+rUd7qfL/tmwNxEh0axYK
AyIun1Bxcy7QJGjtpGAz+Ku7jS9T3HxzyxhqilQo3co8jAW0WJ1YwHl+XPgQXyjV
DLG6Vxt4syiwsoSXGn8MQugs4nlBT+0qWl8YamIR+o7KkAYPc2QWkXlzEDfNeIW8
JNCZA3sy7VGi1ytorZGx16sQsEWnyRG9a6/WV20Dr+HVs1SKPcFzIfG6mVngR07T
mQMHnbAF6Z5d8VTcPQfMxd7UH48s1bHtk5lcSTa3j0Cw+GkA6ytTmjPdJ1qRcdkH
dl9jAfADe4O6frG+9XH7FEFqhmkghVI7bOCA4ZOhClVaIcDGgEZc2y7sY9/oZ7P4
KXBD2R5X1caCUM0UtzwL7/8ddOtPtHIrFnhY+7+I6ijt9qmI0BY=
=Ttgq
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- bpf: do not reject when the stack read size is different from the
tracked scalar size
- net: fix premature exit from NAPI state polling in napi_disable()
- riscv, bpf: fix RV32 broken build, and silence RV64 warning
Current release - new code bugs:
- net: fix possible NULL deref in sock_reserve_memory
- amt: fix error return code in amt_init(); fix stopping the
workqueue
- ax88796c: use the correct ioctl callback
Previous releases - always broken:
- bpf: stop caching subprog index in the bpf_pseudo_func insn
- security: fixups for the security hooks in sctp
- nfc: add necessary privilege flags in netlink layer, limit
operations to admin only
- vsock: prevent unnecessary refcnt inc for non-blocking connect
- net/smc: fix sk_refcnt underflow on link down and fallback
- nfnetlink_queue: fix OOB when mac header was cleared
- can: j1939: ignore invalid messages per standard
- bpf, sockmap:
- fix race in ingress receive verdict with redirect to self
- fix incorrect sk_skb data_end access when src_reg = dst_reg
- strparser, and tls are reusing qdisc_skb_cb and colliding
- ethtool: fix ethtool msg len calculation for pause stats
- vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to
access an unregistering real_dev
- udp6: make encap_rcv() bump the v6 not v4 stats
- drv: prestera: add explicit padding to fix m68k build
- drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge
- drv: mvpp2: fix wrong SerDes reconfiguration order
Misc & small latecomers:
- ipvs: auto-load ipvs on genl access
- mctp: sanity check the struct sockaddr_mctp padding fields
- libfs: support RENAME_EXCHANGE in simple_rename()
- avoid double accounting for pure zerocopy skbs"
* tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits)
selftests/net: udpgso_bench_rx: fix port argument
net: wwan: iosm: fix compilation warning
cxgb4: fix eeprom len when diagnostics not implemented
net: fix premature exit from NAPI state polling in napi_disable()
net/smc: fix sk_refcnt underflow on linkdown and fallback
net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer()
gve: fix unmatched u64_stats_update_end()
net: ethernet: lantiq_etop: Fix compilation error
selftests: forwarding: Fix packet matching in mirroring selftests
vsock: prevent unnecessary refcnt inc for nonblocking connect
net: marvell: mvpp2: Fix wrong SerDes reconfiguration order
net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory
net: stmmac: allow a tc-taprio base-time of zero
selftests: net: test_vxlan_under_vrf: fix HV connectivity test
net: hns3: allow configure ETS bandwidth of all TCs
net: hns3: remove check VF uc mac exist when set by PF
net: hns3: fix some mac statistics is always 0 in device version V2
net: hns3: fix kernel crash when unload VF while it is being reset
net: hns3: sync rx ring head in echo common pull
net: hns3: fix pfc packet number incorrect after querying pfc parameters
...
Add support for AMD SEV and SEV-ES intra-host migration support. Intra
host migration provides a low-cost mechanism for userspace VMM upgrades.
In the common case for intra host migration, we can rely on the normal
ioctls for passing data from one VMM to the next. SEV, SEV-ES, and other
confidential compute environments make most of this information opaque, and
render KVM ioctls such as "KVM_GET_REGS" irrelevant. As a result, we need
the ability to pass this opaque metadata from one VMM to the next. The
easiest way to do this is to leave this data in the kernel, and transfer
ownership of the metadata from one KVM VM (or vCPU) to the next. In-kernel
hand off makes it possible to move any data that would be
unsafe/impossible for the kernel to hand directly to userspace, and
cannot be reproduced using data that can be handed to userspace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds testcases for intra host migration for SEV and SEV-ES. Also adds
locking test to confirm no deadlock exists.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20211021174303.385706-6-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactors out open path support from open_kvm_dev_path_or_exit() and
adds new helper for SEV device path.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <20211021174303.385706-5-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The below commit added optional support for passing a bind address.
It configures the sockaddr bind arguments before parsing options and
reconfigures on options -b and -4.
This broke support for passing port (-p) on its own.
Configure sockaddr after parsing all arguments.
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new field was added to the bpf_sk_lookup data that users can access.
Add tests that validate that the new ingress_ifindex field contains the
right data.
Signed-off-by: Mark Pashmfouroush <markpash@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211110111016.5670-3-markpash@cloudflare.com
In commit 6de6e46d27 ("cls_flower: Fix inability to match GRE/IPIP
packets"), cls_flower was fixed to match an outer packet of a tunneled
packet as would be expected, rather than dissecting to the inner packet and
matching on that.
This fix uncovered several issues in packet matching in mirroring
selftests:
- in mirror_gre_bridge_1d_vlan.sh and mirror_gre_vlan_bridge_1q.sh, the
vlan_ethtype match is copied around as "ip", even as some of the tests
are running over ip6gretap. This is fixed by using an "ipv6" for
vlan_ethtype in the ip6gretap tests.
- in mirror_gre_changes.sh, a filter to count GRE packets is set up to
match TTL of 50. This used to trigger in the offloaded datapath, where
the envelope TTL was matched, but not in the software datapath, which
considered TTL of the inner packet. Now that both match consistently, all
the packets were double-counted. This is fixed by marking the filter as
skip_hw, leaving only the SW datapath component active.
Fixes: 6de6e46d27 ("cls_flower: Fix inability to match GRE/IPIP packets")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It looks like test_vxlan_under_vrf.sh is always failing to verify the
connectivity test during the ping between the two simulated VMs.
This is due to the fact that veth-hv in each VM should have a distinct
MAC address.
Fix by setting a unique MAC address on each simulated VM interface.
Without this fix:
$ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [FAIL]
With this fix applied:
$ sudo ./tools/testing/selftests/net/test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
NOTE: the connectivity test with the underlay VRF is still failing; it
seems that ARP requests are blocked at the simulated hypervisor level,
probably due to some missing ARP forwarding rules. This requires more
investigation (in the meantime we may consider to set that test as
expected failure - XFAIL).
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-11-09
We've added 7 non-merge commits during the last 3 day(s) which contain
a total of 10 files changed, 174 insertions(+), 48 deletions(-).
The main changes are:
1) Various sockmap fixes, from John and Jussi.
2) Fix out-of-bound issue with bpf_pseudo_func, from Martin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: sk_skb data_end access incorrect when src_reg = dst_reg
bpf: sockmap, strparser, and tls are reusing qdisc_skb_cb and colliding
bpf, sockmap: Fix race in ingress receive verdict with redirect to self
bpf, sockmap: Remove unhash handler for BPF sockmap usage
bpf, sockmap: Use stricter sk state checks in sk_lookup_assign
bpf: selftest: Trigger a DCE on the whole subprog
bpf: Stop caching subprog index in the bpf_pseudo_func insn
====================
Link: https://lore.kernel.org/r/20211109215702.38350-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
When running a test program, 'run_one()' checks if the program has the
execution permission and fails if it doesn't. However, it's easy to
mistakenly lose the permissions, as some common tools like 'diff' don't
support the permission change well[1]. Compared to that, making mistakes
in the test program's path would only rare, as those are explicitly listed
in 'TEST_PROGS'. Therefore, it might make more sense to resolve the
situation on our own and run the program.
For this reason, this commit makes the test program runner function still
print the warning message but to try parsing the interpreter of the
program and to explicitly run it with the interpreter, in this case.
[1] https://lore.kernel.org/mm-commits/YRJisBs9AunccCD4@kroah.com/
Link: https://lkml.kernel.org/r/20210810164534.25902-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Exception handling is triggered in BPF tracing programs when a NULL pointer
is dereferenced; the exception handler zeroes the target register and
execution of the BPF program progresses.
To test exception handling then, we need to trigger a NULL pointer dereference
for a field which should never be zero; if it is, the only explanation is the
exception handler ran. task->task_works is the NULL pointer chosen (for a new
task from fork() no work is associated), and the task_works->func field should
not be zero if task_works is non-NULL. The test verifies that task_works and
task_works->func are 0.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1636131046-5982-3-git-send-email-alan.maguire@oracle.com
