The device can support two credit modes, message based (default) and
packet based. In order to enable packet based mode, the QP should be
created with special flag that indicates this.
This patch adds support for the new DV QP creation flag that can be used
for RC QPs in order to change the credit mode.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allows XRC usage from the verbs flow in a DEVX context.
As XRCD is some shared kernel resource between processes it should be
created with UID=0 to point on that.
As a result once XRC QP/SRQ are created they must be used as well with
UID=0 so that firmware will allow the XRCD usage.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The current implementation of create QP requires contiguous memory, such a
requirement is problematic once the memory is fragmented or the system is
low in memory, it causes failures in dma_zalloc_coherent().
This patch takes advantage of the new mlx5_core API which allocates a
fragmented buffer. This makes the QP creation much more resilient to
memory fragmentation. Data-path code was adapted to the fact that WQEs can
cross buffers.
We also use the opportunity to fix some cosmetic legacy coding convention
errors which were in the feature scope.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is required so the user can set the SL on the DC QP.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extended atomics are supported with RC and XRC QP types, but the commit
citied in the Fixes line added an unneeded check to
to_mlx5_access_flags. This broke XRC QPs.
The following ib_atomic_bw invocation over XRC reproduces the issue:
ib_atomic_bw -d mlx5_1 --connection=XRC --atomic_type=FETCH_AND_ADD
It is safe to remove such checks because the QP type was already checked
in ib_modify_qp_is_ok(), which was previously called from
mlx5_ib_modify_qp.
Fixes: a60109dc9a ("IB/mlx5: Add support for extended atomic operations")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the
current fence will be SMALL instead of Normal Fence.
Without this patch krping doesn't work on CX-5 devices and throws
following error:
The error messages are from CX5 driver are: (from server side)
[ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434017] 00000000 00000000 00000000 00000000
[ 710.434018] 00000000 93003204 100000b8 000524d2
[ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32
Fixed the logic to set the correct fence type.
Fixes: 6e8484c5cf ("RDMA/mlx5: set UMR wqe fence according to HCA cap")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extended atomic operations cmp&swp and fetch&add is a Mellanox
feature extending the standard atomic operation to use, varied
operand sizes, as apposed to normal atomic operation that use
an 8 byte operand only.
Extended atomics allows masking the results and arguments.
This patch configures QP to support extended atomic operation
with the maximum size possible, as exposed by HCA capabilities.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Requester scatter to CQE is restricted to QPs configured to signal
all WRs.
This patch adds ability to enable scatter to cqe (force enable)
in the requester without sig_all, for users who do not want all WRs
signaled but rather just the ones whose data found in the CQE.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Flags sent down from user might not be supported by
running driver.
This might lead to unwanted bugs.
To solve this, added macro to test for unsupported flags.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Scatter to CQE is a HW offload that saves PCI writes by scattering the
payload to the CQE.
This patch extends already existing functionality to support DC
transport type.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove double error check from create user RQ error flow.
Fixes: 79b20a6c30 ("IB/mlx5: Add receive Work Queue verbs")
Signed-off-by: Gal Pressman <pressmangal@gmail.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ll parameter is not used in ib_modify_qp_is_ok(), so remove it.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose RAW QP device handles to user space by extending the UHW part of
mlx5_ib_create_qp_resp.
This data is returned only when DEVX context is used where it may be
applicable.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Kernel convention is that a driver for a subsystem will print using
dev_* on the subsystem's struct device, or with dev_* on the physical
device. Drivers should rarely use a pr_* function.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of XRCD commands so that the firmware can manage the
XRCD object in a secured way.
That will enable using an XRCD that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of RQT commands so that the firmware can manage the
RQT object in a secured way.
That will enable using an RQT that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of TIS commands so that the firmware can manage the
TIS object in a secured way.
That will enable using a TIS that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of TIR commands so that the firmware can manage the
TIR object in a secured way.
That will enable using a TIR that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of DCT create command so that the firmware can
manage the DCT object in a secured way.
The uid for the destroy and drain commands are set by mlx5_core.
That will enable using a DCT that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of SQ commands so that the firmware can manage the
SQ object in a secured way.
The uid for the destroy command is set by mlx5_core.
This will enable using an SQ that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of RQ commands so that the firmware can manage the
RQ object in a secured way.
The uid for the destroy command is set by mlx5_core.
This will enable using an RQ that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of QP creation so that the firmware can manage the
QP object in a secured way.
The uid for the destroy and the modify commands is set by mlx5_core.
This will enable using a QP that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For dependencies, branch based on 'mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
mlx5 mcast/ucast loopback control enhancements from Leon Romanovsky:
====================
This is short series from Mark which extends handling of loopback
traffic. Originally mlx5 IB dynamically enabled/disabled both unicast
and multicast based on number of users. However RAW ethernet QPs need
more granular access.
====================
Fixed failed automerge in mlx5_ib.h (minor context conflict issue)
mlx5-vport-loopback branch:
RDMA/mlx5: Enable vport loopback when user context or QP mandate
RDMA/mlx5: Allow creating RAW ethernet QP with loopback support
RDMA/mlx5: Refactor transport domain bookkeeping logic
net/mlx5: Rename incorrect naming in IFC file
Signed-off-by: Doug Ledford <dledford@redhat.com>
A user can create a QP which can accept loopback traffic, but that's not
enough. We need to enable loopback on the vport as well. Currently vport
loopback is enabled only when more than 1 users are using the IB device,
update the logic to consider whatever a QP which supports loopback was
created, if so enable vport loopback even if there is only a single user.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Expose two new flags:
MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC
MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC
Those flags can be used at creation time in order to allow a QP
to be able to receive loopback traffic (unicast and multicast).
We store the state in the QP to be used on the destroy path
to indicate with which flags the QP was created with.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove a trailing underscore from the multicast/unicast names.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The transition is allowed from any state and the atrribute mask must be
IB_QP_STATE.
Fixes: c32a4f296e ("IB/mlx5: Add support for DC Initiator QP")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mdev->state device state is not protected by the QP for which WRs are
being processed. Therefore, there is no need to hold spin lock while
checking mdev state.
Given that device fatal error is unlikely situation, wrap the condition
check with unlikely().
Additionally, kernel QP1 is also a kernel ULP for which soft CQEs needs
to be generated. Therefore, check for device fatal error before
processing QP1 work requests.
Fixes: 89ea94a7b6 ("IB/mlx5: Reset flow support for IB kernel ULPs")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the current code, the TX affinity is per RoCE device, which can cause
unfairness between different contexts. e.g. if we open two contexts, and
each open 10 QPs concurrently, all of the QPs of the first context might
end up on the first port instead of distributed on the two ports as
expected
To overcome this unfairness between processes, we maintain per device TX
affinity, and per process TX affinity.
The allocation algorithm is as follow:
1. Hold two tx_port_affinity atomic variables, one per RoCE device and one
per ucontext. Both initialized to 0.
2. In mlx5_ib_alloc_ucontext do:
2.1. ucontext.tx_port_affinity = device.tx_port_affinity
2.2. device.tx_port_affinity += 1
3. In modify QP INIT2RST:
3.1. qp.tx_port_affinity = ucontext.tx_port_affinity % MLX5_PORT_NUM
3.2. ucontext.tx_port_affinity += 1
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5_ib_create_qp_resp was never initialized and only the first 4 bytes
were written.
Fixes: 41d902cb7c ("RDMA/mlx5: Fix definition of mlx5_ib_create_qp_resp")
Cc: <stable@vger.kernel.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
To make this possible, only one cast had to be introduce that casts away
constness, namely in rpcrdma_post_recvs(). The only way I can think of to
avoid that cast is to introduce an additional loop in that function or to
change the data type of bad_wr from struct ib_recv_wr ** into int
(an index that refers to an element in the work request list). However,
both approaches would require even more extensive changes than this
patch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the next patch will constify the wr pointer, do not modify the data
that pointer points at.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When posting a send work request, the work request that is posted is not
modified by any of the RDMA drivers. Make this explicit by constifying
most ib_send_wr pointers in RDMA transport drivers.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
User's supplied index is checked again total number of system pages, but
this number already includes num_static_sys_pages, so addition of that
value to supplied index causes to below error while trying to access
sys_pages[].
BUG: KASAN: slab-out-of-bounds in bfregn_to_uar_index+0x34f/0x400
Read of size 4 at addr ffff880065561904 by task syz-executor446/314
CPU: 0 PID: 314 Comm: syz-executor446 Not tainted 4.18.0-rc1+ #256
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xef/0x17e
print_address_description+0x83/0x3b0
kasan_report+0x18d/0x4d0
bfregn_to_uar_index+0x34f/0x400
create_user_qp+0x272/0x227d
create_qp_common+0x32eb/0x43e0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x22d0
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
ksys_write+0xc6/0x1a0
do_syscall_64+0xa7/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x433679
Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 91 fd ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff2b3d8e48 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433679
RDX: 0000000000000040 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 00000000006d4018 R08: 00000000004002f8 R09: 00000000004002f8
R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000
R13: 000000000040cb00 R14: 000000000040cb90 R15: 0000000000000006
Allocated by task 314:
kasan_kmalloc+0xa0/0xd0
__kmalloc+0x1a9/0x510
mlx5_ib_alloc_ucontext+0x966/0x2620
ib_uverbs_get_context+0x23f/0xa60
ib_uverbs_write+0xc2c/0x1010
__vfs_write+0x10d/0x720
vfs_write+0x1b0/0x550
ksys_write+0xc6/0x1a0
do_syscall_64+0xa7/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 1:
__kasan_slab_free+0x12e/0x180
kfree+0x159/0x630
kvfree+0x37/0x50
single_release+0x8e/0xf0
__fput+0x2d8/0x900
task_work_run+0x102/0x1f0
exit_to_usermode_loop+0x159/0x1c0
do_syscall_64+0x408/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff880065561100
which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 2052 bytes inside of
4096-byte region [ffff880065561100, ffff880065562100)
The buggy address belongs to the page:
page:ffffea0001955800 count:1 mapcount:0 mapping:ffff88006c402480 index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 ffffea0001a7c000 0000000200000002 ffff88006c402480
raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880065561800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880065561880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff880065561900: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff880065561980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880065561a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Cc: <stable@vger.kernel.org> # 4.15
Fixes: 1ee47ab3e8 ("IB/mlx5: Enable QP creation with a given blue flame index")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need for three consecutive calls to alloc_bfreg(). It can be
implemented with one function.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch follows the logic from ib_core but considers the internal
device state upon executing the involved commands.
Specifically,
Upon internal error state modify QP to an error state can be assumed to
be success as each in-progress WR going to be flushed in error in any
case as expected by that modify command.
In addition,
As the drain should never fail the driver makes sure that post_send/recv
will succeed even if the device is already in an internal error state.
As such once the driver will supply the simulated/SW CQEs the CQE for
the drain WR will be handled as well.
In case of an internal error state the CQE for the drain WR may be
completed as part of the main task that handled the error state or by
the task that issued the drain WR.
As the above depends on scheduling the code takes the relevant locks and
actions to make sure that the completion handler for that WR will always
be called after that the post_send/recv were issued but not in parallel
to the other task that handles the error flow.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Return a device UAR index for a given user index via the DEVX interface.
Security note:
The hardware protection mechanism works like this: Each device object that
is subject to UAR doorbells (QP/SQ/CQ) gets a UAR ID (called uar_page in
the device specification manual) upon its creation. Then upon doorbell,
hardware fetches the object context for which the doorbell was rang, and
validates that the UAR through which the DB was rang matches the UAR ID
of the object.
If no match the doorbell is silently ignored by the hardware. Of
course, the user cannot ring a doorbell on a UAR that was not mapped to
it.
Now in devx, as the devx kernel does not manipulate the QP/SQ/CQ command
mailboxes (except tagging them with UID), we expose to the user its UAR
ID, so it can embed it in these objects in the expected specification
format. So the only thing the user can do is hurt itself by creating a
QP/SQ/CQ with a UAR ID other than his, and then in this case other users
may ring a doorbell on its objects.
The consequence of that will be that another user can schedule a QP/SQ
of the buggy user for execution (just insert it to the hardware schedule
queue or arm its CQ for event generation), no further harm is expected.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The core code now ensures that all driver callbacks that receive an
rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present.
Drivers can use this pointer instead of calling a query function with
sgid_index. This simplifies the drivers and also avoids races where a
gid_index lookup may return different data if it is changed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Update mlx4 to support user MR creation against read-only memory, previously
it required the memory to be writable.
Based on rdma for-rc due to dependencies.
* mr_fix: (2 commits)
IB/mlx4: Mark user MR as writable if actual virtual memory is writable
IB/core: Make testing MR flags for writability a static inline function
Several items of conflict have arisen between the RDMA stack's for-rc
branch and upcoming for-next work:
9fd4350ba8 ("IB/rxe: avoid double kfree_skb") directly conflicts with
2e47350789 ("IB/rxe: optimize the function duplicate_request")
Patches already submitted by Intel for the hfi1 driver will fail to
apply cleanly without this merge
Other people on the mailing list have notified that their upcoming
patches also fail to apply cleanly without this merge
Signed-off-by: Doug Ledford <dledford@redhat.com>
As most kernel RDMA ULPs, (e.g. NVMe over Fabrics in its default
"register_always=Y" mode) registers and invalidates user buffer
upon each IO.
Today the mlx5 driver is posting the registration work
request using scatter/gather entry for the MTT/KLM list.
The fetch of the MTT/KLM list becomes the bottleneck in
number of IO operation could be done by NVMe over Fabrics
host driver on a single adapter as shown below.
This patch is adding the support for inline registration
work request upon MTT/KLM list of size <=64B.
The result for NVMe over Fabrics is increase of > x3.5 for small
IOs as shown below, I expect other ULPs (e.g iSER, SRP, NFS over RDMA)
performance to be enhanced as well.
The following results were taken against a single NVMe-oF (RoCE link layer)
subsystem with a single namespace backed by null_blk using fio benchmark
(with rw=randread, numjobs=48, iodepth={16,64}, ioengine=libaio direct=1):
ConnectX-5 (pci Width x16)
---------------------------
Block Size s/g reg_wr inline reg_wr
++++++++++ +++++++++++++++ ++++++++++++++++
512B 1302.8K/34.82% 4951.9K/99.02%
1KB 1284.3K/33.86% 4232.7K/98.09%
2KB 1238.6K/34.1% 2797.5K/80.04%
4KB 1169.3K/32.46% 1941.3K/61.35%
8KB 1013.4K/30.08% 1236.6K/39.47%
16KB 695.7K/20.19% 696.9K/20.59%
32KB 350.3K/9.64% 350.6K/10.3%
64KB 175.86K/5.27% 175.9K/5.28%
ConnectX-4 (pci Width x8)
---------------------------
Block Size s/g reg_wr inline reg_wr
++++++++++ +++++++++++++++ ++++++++++++++++
512B 1285.8K/42.66% 4242.7K/98.18%
1KB 1254.1K/41.74% 3569.2K/96.00%
2KB 1185.9K/39.83% 2173.9K/75.58%
4KB 1069.4K/36.46% 1343.3K/47.47%
8KB 755.1K/27.77% 748.7K/29.14%
Tested-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Idan Burstein <idanb@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
User can leave system without medium BlueFlames registers,
however the code assumed that at least one such register exists.
This patch fixes that assumption.
Fixes: c1be5232d2 ("IB/mlx5: Fix micro UAR allocator")
Reported-by: Rohit Zambre <rzambre@uci.edu>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.
Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back). This
series addresses an IRQ performance issue (patch 1), cleanups related to
the fix for the IRQ performance problem (patches 2-6), and then extends
the fragmented completion queue support that already exists in the net
side of the driver to the ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the remaining
10 patches to the IB subsystem. This series extends the current
'representor' framework when the mlx5 driver is in switchdev mode from
being a netdev only construct to being a netdev/IB dev construct. The IB
dev is limited to raw Eth queue pairs only, but by having an IB dev of
this type attached to the representor for a switchdev port, it enables
DPDK to work on the switchdev device.
* All net related, but needed as infrastructure for the rdma driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to
set the port for ib_srpt to listen on in configfs in order for it to be
enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while working on new
code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory'
user API features
- Infrastructure updates for the new IOCTL interface, based on increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit
kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ku8g
-----END PGP SIGNATURE-----
Merge tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
When a Raw Ethernet QP is created, we actually create a few objects.
One of these objects is a TIR. Currently, a TIR could hash (and spread
the traffic) by IP or port only. Adding a hashing by IPSec SPI to TIR
creation with the required UAPI bit.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This structure is pushed down the ex and the non-ex path, so it needs to be
aligned to 8 bytes to go through ex without implicit padding.
Old user space will provide 4 bytes of resp on !ex and 8 bytes on ex, so
take the approach of just copying the minimum length.
New user space will consistently provide 8 bytes in both cases.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move query SQ state function from mlx5_ib to mlx5_core in order to
have it in shared code.
It will be used in a downstream patch from mlx5e.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In some firmware configuration, UMR usage from Virtual Functions is restricted.
This information is published to the driver using new capability bits.
Avoid using UMRs in these cases and use the Firmware slow-path flow to create
mkeys and populate them with Virtual to Physical address translation.
Older drivers that do not have this patch, will end up using memory keys that
aren't populated with Virtual to Physical address translation that is done
part of the UMR work.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
